Tender For Re-Appropriation Of Ngo Hostel Into Drdo Guest House By Renovation/ Alteration And Other Works For Proposed Drdo Guest House At Diat Girinagar, Pune, Pune-Maharashtra

TDR : 53733462

Tender Notice
BOQ

8 Days Left

Pune , Maharashtra

Tender Brief : Tender For Re-Appropriation Of Ngo Hostel Into Drdo Guest House By Renovation/ Alteration And Other Works For Proposed Drdo Guest House At Diat Girinagar, Pune

Document Fees
Refer document

EMD
₹ 313580.0 /-

Tender Value
₹ 1.56 Crore /-

Submission Date
20-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL WORKS
2	Dismantling tile work in floors and roofs laid in cement mortar including stacking materialwithin 50 metres lead.
3	For thickness of tiles 10 mm to 25 mm.
4	Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600mm
5	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
6	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
7	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red .Area of slab upto 0.50 sqm
8	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge..Granite work.
9	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below.
10	Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at allcorners, including drilling of holes for fixing hardware and drainage of water etc. After fixingframe the gap betweenframe and adjacent finished wall shall befilled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
11	Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system.
12	Providing andfxing ISI marked fush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
13	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
14	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hinges and necessary screws shall be paid separately).Second class teak wood.30 mm thick shutters.
15	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of0.5 mm dia wire and 1.4 mm aperture on both sides
16	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood.
17	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
18	Providing and fixingfactory made panel PVC door shutter consisting offrame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.
19	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
20	Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
21	Providing andfixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
22	Providing and fixing bright finished brass butt hinges with necessary screws etc. Complete :125x85x5.5 mm (heavy type)
23	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. Complete :200 x 10 mm
24	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. Complete :150 x 10 mm
25	Providing and fixing bright finished brass handles with screws etc. Complete: 125 mm
26	Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm
27	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
28	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
29	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
30	Providing and fixing double action hydraulic foor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting foors, embedding in foors as required and making good the same matching to the existing foor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
31	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
32	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
33	Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
34	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter.
35	Providing and fixing 50 mm brightfinished brass cup board or wardrobe knob of approved quality with necessary screws.
36	Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. Complete.150 mm.
37	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete. Triple strip vertical type
38	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia
39	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
40	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
41	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore.
42	Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.
43	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overfow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 1W.C. pan with ISI marked white solid plastic seat and lid.
44	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever Required.White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
45	Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
46	Providing and fixing factory made Kitchen Cabinet Shutter/ Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
47	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80X1.25 mm M.S. laths with 1.25 mm thick top cover
48	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
49	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm npminal bore.
50	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore.
51	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal bore.
52	Providing and fixing toilet paper holder. CP Brass.
53	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32mm dia.
54	Providing and fixing uplasticised PVC connection pipe with brass unions.45 cm length.15 mm nominal borre.
55	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.15 mm nominal bore.
56	Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
57	S.C.I Gully or Nahani Trap grating 100 mm dia each
58	Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia.
59	All as pe item item No.54 above bu 125 mm nominal dia with 25 mm waste hole.
60	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in – charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix).
61	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
62	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
63	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand (zone-) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
64	Material and labour for 12 mmthick cement plaster of mix : 1:4 (1 cement: 4 fine sand) ove PCC (while concrete is green ) using approved liquid water proofing.Note : supply of liquid water proofing compound will be measured and paid separately and dosage as per manufacturer instructions complete all as specified and directed.
65	Supply of liquid water proofing compound complete all as specified and directed.
66	PREPATORY WORKS : Thorough cleaning work, removal of loose screed, repairing the damaged portions and filling any minor potholes with polymer modified mortar using Fosroc Nitobond SBR Latex mixed with cement and quartz sand in the ratio of 3 litres per bag of cement. \"Providing and laying coving at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR Latex at dosage of 3 Ltrs per 50kg of cement as per manufacturer\"s specification. Filling the annular space between concrete surface and rain water PVC pipe using non shrink grout after preparing the surface using sand paper and application of Nitobond SBR Latex as a priming coat on the concrete walls. Mixing and pouring Conbextra GP2, high strength grout with clean and cool water at ratio of 0.16 on the prepared surface to make the bore packing water tight. The rate shall include necessay materials, tools and application procedure as per manufacturer\"s specification
67	WATERPROOFING COATINGPorous concrete surfaces to be primed with Nitoproof WB primer. Providing and applying Fosroc Nitoproof 600 PF of Fosroc chemicalsa single component pitch free polyurethane based coating that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. It is elastomeric, seamless waterproof membrane applied in 2 coats to achieve DFT 1.5 mm thick having a elongation capacity of over 600% . Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed inside the groove of 20mm wide x 10mm thick flushed with polymer modified mortar as per vendor recommendation. Laying 200gsm non woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete.The material shall achieve following properties: Elongation (ASTM D412) : 600 %, Specific gravity : 1.50 + 0.1 g/cc,Solid content : 85% min.,Tensile strength (ASTM D412): 2.5 N/mm2, Crack bridging (ASTM C836) > 2mm Tear resistance (ASTM D624) : 15 kN/m,Water vapour transmission(ASTM E96) : 0.6 g/m²/hr.,Water permeability @ 5 bar : Nil, Shore A hardness (ASTM D2240) : 60, Adhesion in-peel test (ASTM C836) > 50N
68	M& L for plastering work 15mm thik including dismantling of old plaster or skirting raking out joints and cleaning the surface of the plaster including disposal of rubbish to the dumping ground within 50 metres lead.In cement mortar 1:4 ( 1 cement : 4 coarse sand).
69	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
70	Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
71	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour.Old work (one or more coats).
72	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
73	White washing with lime to give an even shade on ceiling .Old work (two or more coats)
74	Painting with synthetic enamel paint on new wooden surfac e of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
75	Painting with synthetic enamel painton wooden surface of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
76	Painting with synthetic enamel painton new steel surface of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
77	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
78	15 mmdia nominal bore
79	20 mm dia nominal bore
80	Providing and fxing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, reflling & testing of joints complete as per direction of Engineer in Charge.External work:
81	20 mm dia nominal bore
82	25 mm dia nominal bore
83	50 mm dia nominal bore
84	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
85	20 mm dia nominal bore
86	25 mm dia nominal bore
87	50 mm dia nominal bore
88	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
89	20 mm dia nominal bore
90	25 mm dia nominal bore
91	50 mm dia nominal bore
92	Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :150mm diameter.
93	Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. Complete
94	150 mm dia. R.C.C. pipe
95	600mm dia. R.C.C. pipe
96	Providing and fixing on wall ace unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, Single socketed pipes of 110 mm diameter.
97	Supplying andfixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
98	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
99	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge
100	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
101	Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coeficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black), comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles.
102	ELECTRICAL
103	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required)
104	Group C
105	Wiring for twin control light point with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/ PVC insulated copper conductor single core cable etc. as required.
106	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
107	25mm (Conduit size).
108	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
109	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. As required. (Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required).
110	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6& 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required).
111	Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.(Cutting and cheasing of wall and making good the same in case of recessed is also included in the scope of work wherever required).
112	2 Module (75mmX75mm)
113	8 Module (125mmX125mm)
114	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
115	5/6 A switch
116	3 pin 5/6 A socket outlet
117	6 pin 15/16 A socket outlet
118	TV antenna socket outlet
119	Supplying and fixing call bell / buzzer suitable for single phase, 230 V, complete as required.
120	Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
121	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
122	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
123	2 X 10 sq. mm + 1 X 6 sq. mm earth wire
124	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required.
125	Supply, installation, testing and commissioning of following LED fittings complete with electrical connections, fixing & mounting accessories.All the fittings to be supplied with lamps.
126	18 W Recessed/ Surfaces type LED Ceiling light of approved make as per Selection of Engineer-in-Charge or his rep.(Make : Wipro, Philips, Cromton or Equvalent).
127	10 Wled T5 Tube light equivalent to LDESL 18-CDL/WW/LDLL-20CDL ofapproved make as per Selection of Engineer-in-Charge or his rep.(Make : Wipro, Philips, Cromton or Equvalent).
128	18/20 Wled T5 Tube light equivalent to LDESL 18-CDL/WW/LDLL20 -CDL ofapproved make as per Selection of Engineer-in-Charge or his rep.(Make : Wipro, Philips, Cromton or Equvalent).
129	10 W Wall Light / Night Lamp.
130	150 W LED Outdoor (IP 65) Street Light with 40/32 mm dia GI pipe for mounting on Wall or on Street Pole etc as perSelection of Engineer-in-Charge or his rep.(Make : Wipro, Philips, Havels or Equvalent).
131	40W LED Post Top Letern Fitting / Gate Lightas perSelection of Engineer-in-Charge or his rep.(Equivalent to Crompton Maple LPTO-4--Watt Post Top Lantern).
132	Supplying of 120 Sq mm 4 Core Aluminium Armoured Cable
133	Laying of one number PVC insulated and PVC sheathed / XLP power cable of 1.1 Kv grade of following size direct in ground including excavation, saand cushioning, Protetive covering and refilling the trench etc as required.
134	Above 95 Sq mm and upto 185 Sq mm.
135	Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, withchained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
136	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
137	SINGLE POLE (Fo DB s (100 Nos) and for AC Triping P.P(24).
138	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. As required. (But without MCB/RCCB/ Isolator)
139	6 way (6 + 18), Double door
140	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
141	63 A
142	Supplying and fixing of 25 Ltr Storage Geyser : Type and make as approved by Engineer-in-charge.
143	Supplying and fixing of Desert Air Cooler.Type and make as approved by Engineer-in-charge.
144	Supply, Installation, testing and commissioning of 1.5 Ton capacity 5 Star rating split unit air conditioners as per BEE and ISEER with 17000 Btu/hr cooling capacity, Rotary compressor and RD32 Refrigerant, 100% copper condenser type with compressor, condenser, evaporators including Pre-set mode to provide the right cooling comfort, optimises power usage in real time and integrate advanced sensors and micro controllers cooling and fan speed, energy saving, 4 way swing and anti-corrosive blue film for protection on condenser and evaporators etc. As directed by Engineer-in-charge.
145	Supply, Installation, testing and commissioning of2.0 Ton capacity 5 Star rating split unit air conditioners as per BEE and ISEER with 20813 Btu/hr cooling capacity, Rotary compressor and RD32 Refrigerant, 100% copper condenser type with compressor, condenser, evaporators including Pre-set mode to provide the right cooling comfort, optimises power usage in real time and integrate advanced sensors and micro controllers cooling and fan speed, energy saving, 4 way swing and anti-corrosive blue film for protection on condenser and evaporators etc. As directed by Engineer-in-charge.
146	ROADS / PATHS
147	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil.
148	Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30.
149	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
150	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
151	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
152	Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete manufactured in automatic batching plant(RMC plant) including transportation to site in transit mixer
153	Providing and fxing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge.(Pre-moulded joint fillers shall be made of bitumen hot sealing compound depth per impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
154	FENCING AND GATE
155	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
156	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including gettingout and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil.
157	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
158	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
159	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cementmortar 1:6 (1 cement : 6 coarse sand) :With F.P.S.(non modular) bricks
160	12 mm cement plaster of mixCement mortar 1:4 (1 cement: 4 fine sand)
161	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and Finishing: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources).
162	Centering and shutterin including struting, propping etc and removal of form for
163	Foundation, footings, bases of columns, etc fo mass concrete.
164	Columns, Pillars, Piers, Abutments, Posts and Stuts.
165	Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
166	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
167	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
168	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
169	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. As required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
170	PARKING SHED
171	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
172	All kind of Soil
173	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
174	All kinds of soil
175	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
176	1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
177	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :
178	With F.P.S.(non modular) bricks
179	Material and Labour for Rendering 12 mm Cement Plaster of mix cement mortar 1:4, complete all as specified and directed (1 cement : 4 fine sand).
180	Finishing walls with Acrylic Smooth exterior paint of required shade :
181	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
182	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
183	80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
184	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
185	Hot finished welded type tubes
186	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
187	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
188	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
189	1.00 mm thick with zinc coating not less than 275 gm/m²
190	Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand).
191	1.00 mm thick with zinc coating not less than 275 gm/m²
192	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
193	RETAINING WALL
194	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
195	All kinds of soil.
196	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
197	1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
198	Centering and shuttering including strutting, propping etc. and removal of form fo
199	Foundations, footings, bases of columns, etc. for mass concrete
200	Columns, Pillars, Piers, Abutments, Posts and Struts
201	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
202	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
203	1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
204	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level
205	Thermo-Mechanically Treated bars of grade Fe-500D or more
206	Material and Labour for Rendering 12 mm Cement Plaster of mix cement mortar 1:4, complete all as specified and directed (1 cement : 4 fine sand).
207	Finishing walls with Acrylic Smooth exterior paint of required shade :
208	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
209	SCHEDULE OF CREDIT
210	Old Wash Hand Basin
211	Old unserviceable Building/grills/Gates Steel (Iron Scrap)
212	Woodendoor / CBshutterswith frame of any description
213	OldEWC
214	Brass Scrap
215	Poly storage water tanks
216	GI pipes of any dia
217	Switches/Fan regulators/Sockets any description
218	Copper wires of any size and description
219	Light fittings of any size and description
220	TPN/SPN Distibution Board

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents
11	Click here to download tender document	Tender Documents
12	Click here to download tender document	Tender Documents
13	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Re-Appropriation Of Ngo Hostel Into Drdo Guest House By Renovation/ Alteration And Other Works For Proposed Drdo Guest House At Diat Girinagar, Pune, Pune-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Re-Appropriation Of Ngo Hostel Into Drdo Guest House By Renovation/ Alteration And Other Works For Proposed Drdo Guest House At Diat Girinagar, Pune, Pune-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us