Tender For Repair/ Maintenance Of Building No T-662 And Certain Other Bldg No 236 Engr Regt And Other Misc Work At Outside Vijay Durg Under Ge(Fw) Kolkata, Kolkata-West Bengal

TDR : 53712700

Tender Notice
BOQ

19 Days Left

Kolkata , West Bengal

Tender Brief : Tender For Repair/ Maintenance Of Building No T-662 And Certain Other Bldg No 236 Engr Regt And Other Misc Work At Outside Vijay Durg Under Ge(Fw) Kolkata

Document Fees
₹ 500 /-

EMD
₹ 89000.0 /-

Tender Value
₹ 44.50 Lakhs /-

Submission Date
19-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	B/R PortionDismantling of boarding, any description, fixed in any position with screws etc complete all as specified anddirected.
2	M&L False ceiling with \"E\" board \"Classic\", reinforced, designer series, board with HPSC of size 595 mm x 595 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceilingwith hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.(NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
3	Dismantling of galvalume corrugated, semi-corrugated, etc. sheets in roof coverings etc complete all as directed.
4	S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
5	S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
6	Taking down cement plaster or cement lime plaster on brick or stone walls etc including rakingout joints, hacking for keys, scrubbing down with water etc incl necessary scaffolding complete all as specified and directed .
7	M&L 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed.
8	M&L for rendering 15 mm thick built in cement mortar (1:4) in two layers (10 + 5 mm thick each layer) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer\"s instruction for bldg height upto 4 storey incl scaffolding complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).
9	M&L for rendering 15 mm thick built in cement mortar (1:4) in two layers (10 + 5 mm thick each layer) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer\"s instruction for bldg height upto 5-8 storey incl scaffolding complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).
10	M&L for rendering 15 mm thick built in cement mortar (1:4) in two layers (10 + 5 mm thick each layer) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer\"s instruction for bldg height upto 9-12 storey incl scaffolding complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).
11	Supply only Liquid water proofing compound
12	S&F Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed.
13	S&F in repair 12 mm thick commercial type face plywood BWR grade type BB fixed with screws/nails to timber frame work all as specified.
14	S&F in repair 18-19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workfixed with screws/nails to timber frame work all as specified.
15	M&L Preparation of new wooden surfaces and applying two coat of synthetic enemal paint over a coat of wood primer all as specified.
16	Hackingout old broken glass (any thickness, size, quality or description), from metal frames incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed by Engineer-in-Charge.
17	S&F 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squaresin each panes all as specified and as directed by Engineer-in-Charge.Note : the building height is approx 30M.
18	Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Hight)
19	Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 5-8 storey building height complete all as specified and directed. Up to 5-8 floor Hight
20	Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 8-12 storey building height complete all as specified and directed.Up to 8-12 floor Hight
21	M&L for applying one coat of synthetic enemal paint on old Painted wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.
22	M&L for applying one coat of synthetic enemal paint on old Painted steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.
23	M&L for applying one or more coat of french polish on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.
24	M&L preparing old painted surfaceand applying one or more coat of plastic emulsionpaint over a coat of primer to old decorated surfaces wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.
25	M&L for applying 1 mm thick wall care puttyon already prepared surface of wall or ceiling for painting complete all as specified and as directed.
26	Material & Labour for preparation of old surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface , using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Height)
27	Material & Labour for preparation of old surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 5-8 storey building height complete all as specified and directed. Up to 5-8 floor Height
28	Material & Labour for preparation of old surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface,using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 8-12 storey building height complete all as specified and directed.Up to 8-12 floor Height
29	M&L for applying one coat of oil emulsion distemper to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.
30	M&L for applying one coat of oil emulsion distemper to old decorated surfaces of ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.
31	M&L for complete removal of existing treatment andapplying two or more coats of oil emulsion distemper over one coat of primer and one coat putty (1mm thick) to old decorated surfaces of wall complete all as specified and as directed by Engineer-in-Charge.
32	M&L for complete removal of existing treatment andapplying two or more coats of oil emulsion distemper over one coat of primer and one coat putty (1mm thick) to old decorated surfaces of ceiling complete all as specified and as directed by Engineer-in-Charge.
33	M&L Preparation of new plastered surfaces of wall and applying two coat of oil bound distermper over a coat of primer and one coat putty (1mm thick) all as specied and as directed by Engineer-in-Charge.
34	Demolition of stone slabs and tiles of any description or thickness in floors / vertical surfaces, including screed bed on floor/ backing layer of screed on vertical surface etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge.
35	S&F Non skid ceramic tiles 400 x 400 x 7 to 8 mm thick coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed (conforming to IS).
36	S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed 15 mm thick CM 1:6 all as directed (conforming to IS).
37	S&F glazedceramic colour tile of size 300 x 200x 6 to 7 / 350x 250x 7 / 450 x 300 x7 / 600 x 300 x 7 mm thick as in skirting and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing layerbed of10 mm thick CM(1:6) complete all as specified and directed.
38	M&L 18-20mm thick granite slab (in any colour) in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laidover screed bed 20mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge
39	S&F stainless steel 1st grade kitchen plate rack of size 30\" x 24\" x 10\" including taking down old one complete all as specified and directed.
40	S&F stainless steel 1st grade kitchen plate rack of size 48\" x 36 \" x 10\" including taking down old one complete all as specified and directed.
41	S&F in repairs for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete including taking down old one complete all as specified and directed.
42	S&F 15mm bore heavy duty PVC connector pipe of length 600mm with brass coupling at both ends, screwed down for pipe as directed .
43	S&F in repair 15mm bore chromium plated bib Cock with wall flange as directed by Engineer-in-Charge.(Make :JAQUAR: CON 047KN or equivalent make specified in tender.
44	S&F in repair 15mm bore chromium plated two way bib cock with flange as directed by Engineer-in-Charge.(Make : JAQUARCat No: CON CHR : 041KN or equivalent make specified in tender.
45	S&F in repair 15mm bore chromium plated Hand shower (health faucet) 1M flexible tube with wall hook as directed by Engineer-in-Charge.(Make :JAQUAR: Cat Part no: ALE CHR 573 or equivalent make specified in tender.
46	S&F in repair 15mm bore chromium platedConcealed stop cockas directed by Engineer-in-Charge.(Make: JAQUAR cat part no- CON-083KN or equivalent make specified in tender.
47	S&F in repair 15mm bore chromium plated angular stop cockas directed by Engineer-in-Charge.(Make : Jaquar: cat part no- CON-059KN or equivalent make specified in tender.
48	S&F in repair 15mm bore chromium plated central hole single lever basin mixer without popup waste system with 450mm long copper pipe and brass nut, as directed by Engineer-in-charge.(Make : JAQUAR Cat No.FLP-5001BPM(chrome) or equivalent make specified in tender.
49	S&F in repair 15mm bore chromium plated wall mixeras directed by Engineer-in-charge.(Make : Jaquar cat NoFLP5281PM or equivalent make specified in tender.
50	S & F in repair tubular towel rail brass CP 20 mm dia,\"D\" type 60 cm long between flanges as in repair. MAKE jaquar cat no- CAN-1111NM or equivalent make specified in tender.
51	S&F for bath room cabinet mirror size not less than 450 x 600 mm all as specified and as directed.
52	S&FAcrylic cornershelf 300 mm incl takingdown old one complete all as specified and directed.
53	S&F in repairany size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified.
54	S&F in repair Plastic water closet seat, black, closed pattern with flat/ recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
55	Taking up GI water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.
56	Taking up GI water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.
57	Taking up GI water tubing 25 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.
58	Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.
59	Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.
60	Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.
61	S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
62	S&F in repair 15mm dia soap dish chromium plated bars incl takingdown old one complete all as specified and directed
63	S&F in repair 110mm dia CP grating fixed in repair all as spd and as directed.
64	S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
65	S&F in repair floor mounted vitreous china, white wash down water closet pan (padestal pattern of make with \"p\" or \"s\" trap front or back inlet fixing bolts complete all as specified and directed
66	S&F in repair vitreous china floor / wall mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed.(Make : JAQUAR, Cat No: CNS-WHT-853P180SPPSM/853S220SPPSM/853S300SPPSM or equivalent make specified in tender.
67	S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed
68	S&F in repair Vitreous Cliina wash basin, angle back, size 600x480mm white, including Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) excluding taps, waste, chain and plug and porcelain stopper but including brackets and fixing in CM 1:3 with wall all as specified.
69	S&F fortable top wash basin Size 520X 360 X 125 mmwith pop up drainercomplete all as specifed and directed. Make: JaquarCat No. FLS-WHT-5931 or equivalent make specified in tender
70	S&F for urinal size 375x 390x590mm snow white colour including all fittings all as specifed .Make : CeraCat No: S4020112, or equivalent make specified in tender
71	S&F forUrinal division plate including fittings all as specifed and directed. Make: Cera Cat No:S 4090101,or equivalent make specified in tender.
72	S&F for Urinal spreader including all fitting all as specifed and directed. Make: CeraCat No:F8070201 or equivalent make specified in tender
73	S&F forTowel rack (600mm long) with lower hanger including all fittings all as specifed and directed. Make: JaquarCat No. CPA-1181 or equivalent make specified in tender
74	S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed as specified and directed.
75	S&F in repair waste collapsibe pipe / flush pipe for wash hand basin and sink complete all as specified and directed
76	S&F in repair 10 litre capacity low level PVC flushing cistern (any colour) syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket complete all as specified and directed.
77	Takingdown chowkats or frame with shutter(without taking off shutters from the frame) are exceeding 1.5sqm and not exceeding 4sqm all as specified.
78	Taking down chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.50 Sqm each incl removing to store.
79	Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm eachall as directed.
80	S&Fpowder coated anodised aluminiumpartition frame, door frame, window frame with one or more rebates ncluding necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified.
81	S&Fpowder coated anodised Anodised aluminium window and ventilator shutters, fixed type without sash bar in two or three track window or in fixed type ventilator , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement for both sliding shutter etcwith 4 mm thick glass ordinary quality. complete all as specified(NOTE: Glass and wire mesh shall be paid seperately )
82	S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges,in each door, anodised aluminium snap beading screws etc with 4 mm thick glass ordinary quality as per manufactures instruction complete all as specified and directed.(NOTE: Glass shall be paid seperately )
83	S & F 2nd class HW plain solid straight chowkats and frames,wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints complete all as specified and directed
84	M & L 30 mm thick flush shutters solid core construction with black board core and plywood face panels commercial type on both side complete all as specified and directed.
85	S & F 35 mm thick 2nd class hard wood glazed & skeleton shutters open rebated and prepared to received glass,gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I,Sec 8,Clause 8.20 complete all as specified and directed
86	S & F PVC solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,including taking down old one complete all as specified and directed
87	S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC\"C\" channelhaving a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement all as directed by Engineer-in-Charge incl taking down old one complete all as specified and directed.
88	Supply and fixing Factory Made Solid PVC MouldedDoor Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheeton the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
89	S&F 100mm long mild steel butt hinges medium weight cold rolled fixed as directed by Engineer-in-charge.
90	S&F in repair 100mm long mild steel butt hinges medium weight cold rolled fixed as directed by Engineer-in-charge.
91	S&F75mm long mild steel butt hinges medium weight cold rolled fixed as directed by Engineer-in-charge.
92	S&F in repair 75mm long mild steel butt hinges medium weight cold rolled fixed as directed by Engineer-in-charge.
93	S&F200mm long size(ISI marked ) aluminium anodised barrel tower bolt of extruded section as direcrted by Engineer-in-Charge
94	S&F in repair 200mm long size(ISI marked ) aluminium anodised barrel tower bolt of extruded section as direcrted by Engineer-in-Charge
95	S&F 150mm long size(ISI marked ) aluminium anodised barrel tower bolt of extruded section as direcrted by Engineer-in-Charge
96	S&F in repair 150mm long size(ISI marked ) aluminium anodised barrel tower bolt of extruded section as direcrted by Engineer-in-Charge
97	S&F150mm size (ISI markded) extruded aluminium alloy handles(fabricated type) anodised as directed by Engineer-in-charge
98	S&F in repair 150mm size (ISI markded) extruded aluminium alloy handles(fabricated type) anodised as directed by Engineer-in-charge
99	S&F100mm size (ISI markded) extruded aluminium alloy handles(fabricated type) anodised as directed by Engineer-in-charge
100	S&F in repair 100mm size (ISI markded) extruded aluminium alloy handles(fabricated type) anodised as directed by Engineer-in-charge
101	S&F 300mm long aluminium alloy, anodising sliding door bolt, with hasp and staple (bolt type) fixed clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy as directed .
102	S&F in repair 300mm long aluminium alloy, anodising sliding door bolt, with hasp and staple (bolt type) fixed clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy as directed .
103	S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixedwith stainless steel wire staples complete all as specified and directed.
104	S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixedwith stainless steel wire staples as directed.
105	S&F in repair 2 lever brass lock, cupboard grade 1, 50mm size complete all as specified and directed.
106	S&F in repair 4 lever brass type Mortice lock vertical type size 100mm complete all as specified and directed.
107	S&F in repair for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
108	S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and directed.
109	S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and directed.
110	S&F 75mm length hasp and staple aluminium anodised, wire type, stove enemalled balck, including bolt to hinge plate and fixed with screws complete all as specified and directed.
111	Supply and fixing in repair 35mm dia gold line curtain rod alongwith decorative brackets and supporting and rings at a gap of 4\" (Make : Vista sher wood) glass fixed with necessary beading complete all as specified.
112	Dismantling of water tanks exc 250 Ltrs and n exc 500 Ltrs and removing to store.
113	Dismantling of water tanks exc 500 Ltrs and n exc 1000 Ltrs and removing to store.
114	Supply, hosting and fix 300 liters rotational moulded polythene water storage water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (ISI marked) all as specified and directed.
115	All as per item No 114.00 above but 1000 ltr capacity
116	M&L for mechanised cleaning and de-germination of inner surfaces of RCC/PVC water storage tanks, of capacity not exc 500 litres of any description and in any position comprising of seven stage cleaning & sterilisation of water tanks as specified here-in-after :-(a) 1st Stage :- to drain out water by using exit valve or high capacity dewatering system as approved by Engineer-in-Charge.(b)2nd Stage:- Cleaning of all algae formation inside the tank using approved chemical and scrubbing the walls of the tank.(c) 3rd Stage :- Cleaning of internal surfaces of tanks using fresh water by high speed jet pump with pressure 5 PSI.(d) 4th Stage:- Bacterial screening and sterilisation using approved compound.(e) 5th Stage:- Cleaning the floor of water tank by industrial vacuum cleaner.(f) 6th Stage:- Bacterial screening and sterilisationusing ultra violet ray injector covering 360 degrees within the tank to kill all bacteria.(g) 7th Stage:- Bacterial screening and sterilisation of the tank floors using approved oxidising agents.
117	All as per Item No. 116.00 above but capacity of tank exceeding 500 Itrs and not exceeding 1000 Itrs.
118	S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 20gms-210gms) complete all as specified and directed.
119	Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level).
120	M&L for 25 mm thick PCC 1:2:4 type C2 using 20 mm graded aggregate in flooring complete all as specified and directed
121	M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor , plinth protection etccomplete all as specified and directed.
122	Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(upto 4 th storey).
123	Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(5 th storey to 8 th storey).
124	Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(9 storey to 12 storey).
125	Material and labour of CI (spun) Bends (any radious) complete all as specified and directed (upto 8 stoery)
126	Material and labour of CI spun Cowl for 100 mm bore pipe. (upto 8 stoery)
127	Material and labour of CI (spun) Branch pieces, singel (any radiousequal or unequal) for 100 mm bore pipe. (upto 8 stoery)
128	Up rooting of tree from walls of bldgs up to extranded root and spraying of Muraitc Acid required quantity complete from any location of bldg up to ten stories and making good distributed surface with cement mortor (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate upto 10th floor complete all as specified and directed
129	Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of building/structure/ over head tank, upto 40 meter height, above groung level, including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40 mm dia M.S tube, placed 1.5 meter center to center (maximum), horrizontal and vertical tubes joint with cup & lock system with MS tubes, MS Tube Challis, M.S clamps and stair case system in the scaffolding for working platform etc. and maintaining it in a servisable condition for executionof work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc. whereever required, if feasible, for inspection of work at required locations with essential safety fectures for the workmen etc. complete as per directions and approval of GE.Note:- (1) The elevation area of structure (length/breath of building x height of building) cover with scaffolding shall be measured for payment purpose.(2) The payment shall be made once time only for execution of all items each face of building / structure. (3) After complition of work all scaffolding materials shall be removed from building/ structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.
130	S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl necessary scaffolding . (Ht of the bldg 30 met )
131	S & F 110 mm bore PVC (SWR) bends any radius incl necessary scaffolding complete all as specified and directed.
132	Pressed steel frames (105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete , as specified, supplied and fixed all as specified and as directed.
133	Supply and fixing pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete , as specified, supplied and fixed all as specified and as directed.
134	Supply and fixing pressed steel frames (165 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete , as specified, supplied and fixed all as specified and as directed.
135	S & F in repair Continuous (piano) hinges, brass, bright finish or elec- trogalvanised all as specified and as directed.
136	S & Fin repair 75 mm longExtruded brass handles, fabricated type polished all as specified and as directed.
137	S & Fin repair Rim latch with two levers, of mild steelbody. stoveenamelled finish; with brass knob or lever handle fixed all as spd and as directed.
138	Dismantling of structual steel iron or mild steel work Including doors, gates etc & simillar work complete all as specified and directed.
139	S & F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. with in 20mm of the length indicated) Fe-290 (Gde E- 165) etc all as specified including taking down old one complete all as specified and directed.
140	S&F in repair 2mm thick Fibre glass reinforced transluent corrugated / plain sheeting with two corrugation or two plain side laps fixed with \"L\" or \"J\" type hooks complete all as specified and directed.
141	S & F in repair of Brass chromium plated shower roses size 125mmwith or without swivel joints with CP Shower arm 15 mm size, 195mm long with bend of 45 degree with CP flange including fixing to steel pipe or union complete all as specified and directed.
142	S&F in repair fancy type CP telephonic shower with 1 1/2 mtr long flexible tube and hook screwed for iron pipe including frame ( Make : Ess EssHS 105(NILE))(Chrome) complete all as specified and directed.
143	S&F in repair 15mm bore chromium plated sink cock swivel casted spout (wall mounted model) as directed by Engineer-in-charge(Make : JAQUAR Cat No.CON-357KN (chrome) or equivalent make specified in tender.
144	M&L of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floorscomplete all as specified and directed.
145	M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
146	Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
147	S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed .
148	E/M Portion Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.
149	Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :-
150	All as per item No 149.00 above but one light/fan point controlled by one,one way switch.
151	All as per item No 149.00 above but one bell point controlled by one push button switch.
152	All as per item No 149.00 above but one 3 Pin 5 Amps socket out let point onindependentboard.
153	All as per item No 149.00 above but one 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs.
154	All as per item No 149.00 above but using 4.00 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.
155	Material and labour for point wiring surface type with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :-
156	All as per item No 155.00 above but one light/fan point controlled by one,one way switch.
157	All as per item No 155 .00 above but one bell point controlled by one push button switch.
158	All as per item No 155 .00 above but one 3 Pin 5 Amps socket out let point onindependentboard.
159	All as per item No 155 .00 above but one 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs.
160	All as per item No 155 above here-in-before but using 4.0 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.
161	Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed/directed.
162	Supply and fixing of bell push piano flushtype one way 240 Volts 5 Amps all as specified/directed.
163	Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.
164	Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Voltsflush type (non shuttered) complete all as specified / directed.
165	Supply and fixingof switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.
166	Supply and fixing of bell electric, 240 Volts, single pole complete all as specified and directed.
167	Supply & fixingof ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 volts as specified/directed.
168	Supply and fixing of Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed.
169	Supply and fixing ofceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.
170	Taking down and refixing the same fixture i.e light fittings, ceiling fans, bulbs etc along with connected items complete all as specified and directed. Note:- item received from sl No 2 to 13.
171	Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed.
172	Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed.
173	S & F in Replacementforfittings with twin core PVC insulated and overall PVC sheathed cablewith stranded aluminiumconductor 1100 volts grade of size 4 sqmm including taking down old unserviceable wiringcomplete all as specified and directed.
174	Supply and fixing in repair of switch piano flush type 240 Volts 5 Amps, SP, one way,fix in repair including taking down old unsvcomplete all as specifed/directed.
175	Supply and fixing in repair of bell push piano flushtype one way 240 Volts 5 Amps,fix in repair including taking down old unsv complete all as specified/directed.
176	Supply and fixing in repair of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) ,fix in repair including taking down old unsv complete all as specified/ directed.
177	Supply & fixing in repair of socket outlet 2 in 1,3 pin 5 Amps 240 Voltsflush type (non shuttered),fix in repair including taking down old unsv complete all as specified / directed.
178	Supply and fixing in repair of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), fix in repair including taking down old unsv complete all as specified/directed.
179	Supply & fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all asspecified and directed.
180	Supply and fixing in repair of bell electric, 240 Volts, single pole,fix in repair including taking down old unsvcomplete all as specified and directed.
181	Supply and fixing in repair of Bulb holder angular PVC/Polycarbonate suitable for batten fittings,fix in repair including taking down old unsv complete all as specified/directed.
182	Material and labour for modularconcealed point wiring modular type for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dollyincluding making good all disturbed surfaces to match the existing complete all as specified and directed as below :-
183	All as per item No 182.00 above but one light/fan point controlled by one,one way switch.
184	All as per item No 182.00 above but one bell point controlled by one push button switch.
185	All as per item No 182.00 above but one 3 Pin 5 Amps socket out let point onindependentboard.
186	All as per item No 182.00 above but one 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs.
187	All as per item No 182.00 above but using 4.00 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.
188	S&F in Modular switch 1 way 6A,1 modulecomplete all as specified and directed.
189	S&F in Modular switch 1 way 16A,1 module complete all as specified and directed.
190	S&F in Modular bell push1 way 5A,1 module complete all as specified and directed.
191	S&F in burger ding dong type complete all as specified and directed.
192	S&F in ModularSocket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.
193	S&F inModularSocket, 6/16A - 2/3 pin combined 2 module, complete all as specified and directed.
194	S&F Fan step regulator, 120W - 2 module complete all as specified and directed.
195	S&F White cover plate with frame, 1/2 module complete all as specified and directed.
196	S&F White cover plate with frame, 3 module complete all as specified and directed.
197	S&F White cover plate with frame, 4 module complete all as specified and directed.
198	S&F White cover plate with frame, 6 module complete all as specified and directed.
199	S&F White cover plate with frame, 8 module complete all as specified and directed.
200	S&F White cover plate with frame, 12 module complete all as specified and directed.
201	S&F White cover plate with frame, 3 modulecomplete all as specified and directed.
202	S&F White cover plate with frame, 4 modulecomplete all as specified and directed.
203	S&F White cover plate with frame, 6 modulecomplete all as specified and directed.
204	S&F White cover plate with frame, 8 modulecomplete all as specified and directed.
205	S&F White cover plate with frame, 12 modulecomplete all as specified and directed.
206	S&F in repair Modular switch 1 way 6A,1 modulecomplete all as specified and directed.
207	S&F in repair Modular switch 1 way 16A,1 modulecomplete all as specified and directed.
208	S&F in repair Modular switch 2 way 6A,1 modulecomplete all as specified and directed.
209	S&F in repair Modular bell push1 way 5A,1 modulecomplete all as specified and directed.
210	S&F in repair burger ding dong typecomplete all as specified and directed.
211	S&F in repair ModularSocket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.
212	S&F in repair ModularSocket, 6/16A - 2/3 pin combined 2 module,complete all as specified and directed.
213	S&F Fan step regulator, 120W - 2 modulecomplete all as specified and directed.
214	S&F Fan capacitors 2.5 mfd completecomplete all as specified and directed.
215	Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete incl taking down old unsv all as specified and directed by Engr-in-charge.
216	Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 incl taking down old unsv complete all as specified and directed .
217	S & F in replacement of VTPN MCCB 160 A DB Double Door, 08 way, IP 53 protection with Door earthing and mechanical impact strength IK 08complete all as specified and directed.
218	All as per item No 217 but MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KAcomplete all as specified and directed.
219	Supply & fixing in repair of MCB Isolator 4 pole, 100 Amps \"B\" Series 10 KA 415 volts incl taking down old unsv complete all as specified/directed.
220	Supply & fixing in repair of MCB TPN 63 Amps \"B\" Series 10 KA 415 volts incl taking down old unsvcomplete all as specified and directed.
221	Supply & fixing in repair of MCB SPN 40 Amps\"B\" Series 10 KA 240 volts incl taking down old unsvcomplete all as specified and directed.
222	Supply & fixing in repair of MCB SP 6-32 Amps\"B\" Series 10 KA, 240 volts incl taking down old unsv complete all as specified and directed.
223	Supply and fixing in repair of single Pole & Neutralenclosure with 2 pinand earthplug & socket for incorporating with single pole20 Amp SP MCB all as completeincluding taking down oldunsv one a complete all as specified and directed.
224	Supply and fixing in repair of AC short circuit protection motor starter 25 Amps capacity, 230 Volt with MCB DP 25 Amps,plug top & socket complete 6 Mincluding taking down old unsv complete all as specified and directed.
225	Supply and fixing in repair LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rosecomplete all as specified and directed.
226	Supply and fixing in repairLED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rosecomplete all as specified and directed.
227	Supply and fixing LED luminaire 600 mm x 600 mm,35/36 wat, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable sizecomplete all as specified and directed.
228	S & Fix Energy efficient light fitting (LED )Sleek type of capacity 36 W fitting 4FT with extruded Aluminium Hosuing Lamps,driver,connector etc incl hanging/Fixing arrangement with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting through suitable size flexible PVC pipe making good to wall for old fitting including taking down old fitting of complete all as specified and directed. Make Philips Model No 581951 36 W or equivalent make specified in tender.
229	Supply and fixed in repair PVCterminal Rectangular boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc of size 100mmx100mmx50mm deepdepends on the no of switch and socket complete all as specified and directed.
230	Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
231	S&F of casing capping of 20/25 mm size including casing pin and conduit clipcomplete all as specified and directed.
232	S&F of 20/25 mm conduit MMScomplete all as specified and directed.
233	S&F of single core wire of 1.5 sqmm sheathedcomplete all as specified and directed.
234	S&F of single core wire of 2.5 sqmm sheathedcomplete all as specified and directed.
235	S&F of single core wire of 4.00 sqmm sheathedcomplete all as specified and directed.
236	S&F of single core wire of 6.00 sqmm sheathedcomplete all as specified and directed.
237	S&F of single core wire of 10.00 sqmm sheathedcomplete all as specified and directed.
238	S&F of Weather proof flat twin core copper cable of size 4.00 sqmmcomplete all as specified and directed.
239	S&F of Weather proof flat twin core copper cable of size 1.5 sqmmcomplete all as specified and directed.
240	S&F PVC flexible pipes fromalong with saddles from ceiiling rose to connctor fittingscomplete all as specified and directed. Note:- Colour of pipes will be decided by the office.
241	S & Fixin replacementSlim, compact, aluminum die cast edge lit panel. Recess mounted square fixture 12 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout 170x170 mm, height 23±1 mm all as specified and directed.
242	S&Fin replacement Slim, compact, aluminum die cast edge lit panel. Recess/CEILING mounted round fixture 15 W, 6500 K with opal diffuser and separate electronic driver with Ceiling cutout ø 155mm, height 23±1 mm all as specified and directed.
243	Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair/ Maintenance Of Building No T-662 And Certain Other Bldg No 236 Engr Regt And Other Misc Work At Outside Vijay Durg Under Ge(Fw) Kolkata, Kolkata-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair/ Maintenance Of Building No T-662 And Certain Other Bldg No 236 Engr Regt And Other Misc Work At Outside Vijay Durg Under Ge(Fw) Kolkata, Kolkata-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us