|
| 1 | Demolition of old UNSV RCC tank up to 1000 ltr capacity in anyposition and in any condition from the roof and removing all demolished material from the site 250m from ground floors beams,chajjas landiag slab and similar suspended works all as directed. |
| 2 | Complete removal of all existing roof treatment from RCC roof including old hussion felt, tiles etcand preparation of surface with wire brush and cleaning with water complete all as specified and directed. |
| 3 | Material and Labour for 20mm thick cement as per manufacture\"s instruction in CM 1:4 mixed with WPC finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate). |
| 4 | Supply only liquid water proofing compound. ISI Marked |
| 5 | Material and labour for providing plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate) set in CM 1:4, as in copings, includingnecessary form work complete all as specified and directed |
| 6 | M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces. Complete all as specified & directed. |
| 7 | M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complte all as specified and directed |
| 8 | M&L for applying 2 coats aluminium paint over bituminous surface of membrane. complete all as specified and directed |
| 9 | Taking down eaves gutters and rain water pipes (any ize or patterns)including all heads,shoes,bends,swan-necks etc. complete all as directed |
| 10 | Supply and fix in repair PVC (SWR) Grade \"B\" Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed. |
| 11 | Supply and fix in repair PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed. |
| 12 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.complete all as directed |
| 13 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm but nxec 4sqm each.complete all as directed |
| 14 | Taking down Shutters of any descriptionexc1sq but not exe 2 sq. m each. complete all as directed |
| 15 | M&L for Refixing in same opening of any description exc1sq but not exe 2 sq. m each. complete all as directed |
| 16 | M&L for mild steel works as in framed work such as grills, gratings, etcwith ends of bars shoulderedand/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc, complete all as specified and as directed. |
| 17 | S&F Anodised aluminium frame Powder Coated for doors,windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified & directed. |
| 18 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed. (Note: Door shutter will be measured outer to outer frame and no extra will be paid). |
| 19 | S & F powder coated anodised alm ventilator louvre type with two separate frame of size 50.5mmx40mmx1.5mm thick (01x frame for fixing of 5mm thick coloured glass & 01x frame for fixing SS wire mesh) powder coated anodised aluminiumsection weighing 0.55 kg/m including 5mm thick coloured glass, SS wire mesh and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed. |
| 20 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e)4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j)aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 21 | S&F pressed steel frames for doors of size 125x60 mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including PCC filling. complete all as specified and directed. |
| 22 | S&F 30 mm thick flush shutters (factory made) solid coe construction, with block board core and plywood face panels, one face is covered with decoretive face veneer with lipping/frame to match.. |
| 23 | S&F Glazed and skeleton shutters 35 mm thick (factory made) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 25 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, complete all as specified and directed. . |
| 26 | Dismantling boarding, any description, fixed in any position with nails. complete all as specifieid & directed |
| 27 | M&L for Prelaminated particle board 18/19 mm thick interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work framed work as in cupboard.incl. leaping all around.complete all as specifieid & directed |
| 28 | S&F Hasp & staple ,75mm, Aluminium anodised incl bolt to hinge plate and fixed with screws for cupboard.complete all as specifieid & directed |
| 29 | S&F Continious (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps(when open) .complete all as specifieid & directed |
| 30 | S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed. |
| 31 | S&F Aluminium anodised barrel tower bolt 150mm long.complete all as specifieid & directed |
| 32 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed. |
| 33 | Supply & fixing150 mm Aluminium handles, cast type, anodised fixed complete all as specified & directed. |
| 34 | S&F in Door closer hydraulically regulated,designation No. 3,universal type, suitablefor door shutters of 851 to 1000 mm in widthand of weight between61 to 80 kg fixed complete all as specified |
| 35 | S&F 300 mm long mild steel, ordinary quality rat tail rod pattern springs, incl roller and roller plate complete all as specified & directed. |
| 36 | S&F 4mm thick Sheet glass,ordinary quality and glazing with oil putty in squareexc 0.5sq. m in each panefixed complete all as specified & directed. |
| 37 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples fixed complete all as specified & directed. |
| 38 | M&L for Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.. |
| 39 | M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 40 | M&L for preparation of Old or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paintcomplete all as specified and directed. |
| 41 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description. complete all as directed |
| 42 | Material & labour 10mm thick rendering in CM 1:6 on fair fair faces of brick wall orconcrete surfaces finished even and fair complete all as specified & directed. |
| 43 | Material & labour 15mm thick rendering in CM 1:4 on fair fair faces of brick wall orconcrete surfaces finished even and fair complete all as specified & directed. |
| 44 | Material & labour 5mm thick rendering in CM 1:3 on ceiling or concrete surfaces finished even and fair complete all as specified & directed. |
| 45 | M&L forrepair and rendering 10mm thickin cm 1 :3on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete includingcleaning of viisible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedaggregateincluding necessary scafolding work for double/single storey bldgs complete all as specifieid & directed. |
| 46 | M&L for applying 1mm thick wall care putty to make colours scheme and good or rbbing smooth old diffrent colours paintedwall surfaces complete all as specifieid & directed |
| 47 | Material and labour for preparation of OLD plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 48 | Material and labour for preparation of NEW plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 49 | Materials & labour for prepration of NEW plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 50 | Materials & labour for prepration of OLD plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 51 | Material & Labour for preparation of new plastered surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified & directed.. |
| 52 | complete removal and preparation of old plastered surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified & directed.. |
| 53 | Demolition of reinforced cement concrete is Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as directed. |
| 54 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 55 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as directed. |
| 56 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 57 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 58 | M&L for 75 mm thick PCC 1:3:6Type C-2 using 20mm graded aggregate as in plinth protection etc, laid to slope of 1:12 and shall be laid in alternate bays n.exc 1.5 m in length, joints 20mm wide will be provided every 1.5m and filled with ceiling compound grade ‘A’ the joints between external wall and plinth protection shall also be laid with ceiling compound grade ’A’, finishedcement concrete surface even and smooth all as specified. |
| 59 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 60 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4.complete all as specified and directed. |
| 61 | M&L for Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15mm thick cement screed bed or bedding layerin CM 1:6 complete all as specified and directed. |
| 62 | M & L for Glazed ceramic tiles in vertical surfaces450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 63 | M &L for Virified Ceramic tiles Double charged 8 to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 64 | As per item No 63 here in before but in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 65 | S&F 80 mm thickMachine pressed precast concrete colouredinterlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed. |
| 66 | supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer complete all as specified and directed. |
| 67 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design. complete all as specified and directed. |
| 68 | Supply and fixed vitreous china wash down water closet pan (pedestal pattern ) white and inclplastic water closet seat coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified (excl flushing cistern). complete all as specified and directed. |
| 69 | S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc. complete all as specified and directed. |
| 70 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design). complete all as specified and directed. |
| 71 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified & directed. |
| 72 | S&F in repair chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. |
| 73 | S&F in repairvitreous china wash Basin white flat back size 550 x 400mmincluding brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-in-Charge. |
| 74 | S&F in repair Vitreous China urinals, bowl type flat back, size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including 32mm dia waste pipe fitted complete all as specified and directed. |
| 75 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design.complete all as specified and directed. |
| 76 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head \"HOT\" or \"COLD\" with long screwed shank and flynuts screwed for iron pipe (half turn type) complete all as specified and directed. |
| 77 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shankandcup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions Mand fixed of size 15mm bore with fancy design (half turn type) complete all as specified and directed. |
| 78 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) complete all as specified and directed. |
| 79 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipeor for brass ferrule (half turn type) complete all as specified and directed. |
| 80 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 81 | S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges.complete all as specified and directed. |
| 82 | S&F Corner Glass Shelf 300 mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and as directed with fancy design.complete all as specified and directed. |
| 83 | S&F in repair CP soap Dish approx size 160x 160x90mm complete all as specified and directed |
| 84 | Supply & fix in repair PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 85 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail. complete all as specified and directed. |
| 86 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mmcomplete all as specified and as directed by Engr-in-Charge. |
| 87 | Taking down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed |
| 88 | Taking down GI tubing and connection including removing to store of 20mm dia complete aall as directed |
| 89 | Supply, fix in repair 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed. |
| 90 | Supply, fix in repair20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed. |
| 91 | Fixing only GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed |
| 92 | Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed |
| 93 | S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 94 | S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 95 | Supply & fixing in repair steel C.P. grating 100/125 mm dia as reqd at site complete all as directed by Engineer-in-Charge. |
| 96 | S&F for 110 mm bore PVCfloor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. |
| 97 | M&L for PVC(SWR) Tee of radius 110mm dia . complete all as specified and directed. |
| 98 | M&L for PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp. complete all as specified and directed. |
| 99 | M&L for PVC (SWR) bend of radius 75mm dia |
| 100 | M&L for PVC (SWR) Tee of radius 75mm dia . |
| 101 | Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittingscomplete all as specified & directed. |
| 102 | Supply & fixPVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 103 | Demolition ofBrick/stone works masonry, built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excludingashlar facing, dressed stone work andpre-cast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 104 | M &L for Brickwork with fly ashmodular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6complete all as specified and directed. |
| 105 | M&L for brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM(1:4)complete all as specified and as directed by Engr-in-Charge. |
| 106 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 107 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 108 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 109 | M&L for Cement concret(1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete. complete all as specified and directed. |
| 110 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structuredwall plastics pining system for Non - pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 111 | M&L for Cement concrete bed to drain pipes including packing under ,hounching against the side of pipes after they are laid and tested in PCC (1:4:8) type D-2 for100 to 150mm dia (RCC/PVC/DWP/SGR etc) pipe complete all as specified and directed |
| 112 | M&L for providing pre-cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in cm 1:4 including necessary form work complete all as specified and directed by the Engineer-in-Charge |
| 113 | M&L for Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming tocomplete all as specified and directed. |
| 114 | M&L for RCC nominal mix 1:2:4 reinforced type B1 using 20mm graded stone aggregate as infins, fascia, flat form, louvers, parapets and railing incl necessary forn work complete all as specified& directed. |
| 115 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed. |
| 116 | Taking down old/unserviceable MCB DB SPN /TPN any capacity by disconnection of electric connectionincludingMCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed. |
| 117 | Taking down carefully copper/aluminium sub main wiring of size 4/6 sqmm from surface/concealed at any height and removing the materials from site and making good thedisturbed surfaces of walls,floors roofs etc complete all as specified and directed. |
| 118 | M&L for point wiringfor One light/ fan point controlled by onefive amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn throughPVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/ steel terminal boxes ,cromium plate screwas suitablesize for mounting ofswitch & scoketincluding 1.5 sqmm size pvc insulated unsheathed copperconductor to common earth and connecting to earth dolly complete all as specified and directed.Note: Therate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing ofswitch and scoket including cutting chases in wallmaking good to disturbed surface and matching with existing surfaces. |
| 119 | All as per Ser item No 118 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. |
| 120 | All as per Ser item No 118 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board. |
| 121 | All as per Ser item No 118 here-in-before butpoint wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly. |
| 122 | S&F Switch modular 1 way 6 Amps single pole complete all as specified & directed. |
| 123 | S&F Switch modular singlepole , one way 16 Amps complete all as specified and directed. |
| 124 | S&F Socket modular 2/3 pin combined 6 Amps complete all as specified and directed. |
| 125 | S&F Socket modular 2/3 pin combined 16 Amps complete all as specified & directed. |
| 126 | S&FCeiling rose,3 terminal PVC/polycarbonatecomplete all as specified and directed. |
| 127 | S&F modular fan regulator step type,230 Volts single phase complete all as specified and directed at site. |
| 128 | S&F in replacement of LEDtube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting withaluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting upwith twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and directed. |
| 129 | S&F in replacement of LED mirror light 9 watt 230 volts, LED lighting with polycarbonate housing & integrated electronic driver, including all internally prewired and connected with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 130 | S&F Decorative wall light fitting CT2 10 W made up of polycarbonate, complete all as specified and directed at site. Make: Havells Cat part No. LHDL03160099 or equivalent in approved makes. |
| 131 | S&Fceiling fan , 230 volts, 50 Hz, 1200mm sweep with down rods, canopy, blades,BLDC motor, remote etc and service value of the fan shall be greater than 6.1 as per BIS, necessary electric connection from ceiling rose to fan terminal and engraved MES No with synthetic enamal black paint including taking down old fan and deposit to MES store complete all as specified and directed. |
| 132 | S&F exhaust fan made of sturdy engineering plastic complete with louver shutter single phase, 230 V, 50 Hz,300 mm sweepcomplete including makingof hole suitablesizefan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed. |
| 133 | S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting upwith 2/3 core twisted flexible copper conductor cable with suitable sizeofflexible PVC/steel Conduitcomplete all as specified and directed at site . Make : Philips Cat part No. CWLL01V109XX or equivalent in approved makes.of Compton/Bajaj/Heavels |
| 134 | S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socketwith MCB SP 32 Amps complete all as specified and directed. |
| 135 | M&L for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC conduit 20/25 mm diaas per site requirement along walls/ceiling or in ground etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surfaceconduit to be done to match with walls/ceiling existing surfaces.(iii) Two run of wire (phase & neutral) and one run of wire (earth conductor)be measured as one length) |
| 136 | Supply and fixMCBDB SPN 8 way double door with metal door suitable forhousing of MCBsgrouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. |
| 137 | Supply and fix MCCBDB TPN 4 way with metal door suitable forProvision ofincommer as MCCB and out going MCBsgrouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 138 | Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site. |
| 139 | S&F in replacement ofMCB SP 6 to 32 Amps \"C\" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 140 | S&F in replacement of MCB DP 40Amps \"C\" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles. |
| 141 | S&F in replacement ofisolator DP 63 Amps \"C\" Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 142 | Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductorcable. complete all as specified and directed. |
| 143 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement |
| 144 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed |
| 145 | M &L for GI Earthing complete with GIearth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of earth pit not less than 0.90x 0.90 x 2.25 mtr below ground level with top edge ofthe plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earthstripof size 32 x 6 mm, 7.5 mtr long (Min) by means of brazing nuts, bolts, check nuts, & washers,testing of completion (drawn in earth strip protection pipe light gade GI of size 40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSRPart - I filling with charcoal dust , and common salt,including necessary excavation and earth work in any type of soil ,perforated watering pipeof size 15 mm dia,funnel with wire mesh,earth strip protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EICNote :(i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately.(ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.(iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm (Min) top of GI Plate. |
| 146 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
