|
| 1 | M & L for pre- painted galvalume Aluminum Zinc coating (not less than AZ-150 grade) GI based corrugated (profile pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpaas in roof covering/ clading to wall, fixed with self tapping screwsincluding dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 2 | M & L for pre-painted galvalume alluminium zinc coating (not less than AZ-150 grade) GI based palin sheet, 0.50mm thick of any colour as in ridge, gable ends, roofing, clading to wallhaving tensile strength of 550 Mpafixed with self driving screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 3 | Dismantling of wrought Iron or Mild steel works of any descriptionnot other wise provided for complete all as specified and directed. |
| 4 | Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 5 | M&L for fabrication and fixing of rolled mild steel sections (structural steel work) as inroof trusses( framed),trused, purlin, crane gantries, raills and fastenings and heavybracket framing (beams, tee , angle,channel or flat sections) including distance pices, cleats etc(welded/reviting), conforming toFe 410-W (Gde-E250) quality \"A\" complete all as specified and directed. |
| 6 | M&L for structural steel work as in tubular trusses including special shaped washercomplete using ERW or induction butt welded tubes conforming to IS 4943-1997 grade YST-240 complete all as specified and directed. |
| 7 | M&L for rolled mild steel plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachmentconforming to Fe-410W complete all as specified and directed. |
| 8 | S&F 5to 10mm neck dia, mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n.exc. 10cm complete all as specified and directed. |
| 9 | M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete, sub-floors, floors etc, including dmolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed. |
| 10 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 11 | M&Lfor600mm x 600mm x 9mmthick vinyl face, cinyl covered edges andwashablemetalized polyster foil backing, weight @5.6 kg/sqm suspended false ceilingcomprising of non asbestos fibre cementbuilding board fixed or laid/ inserted to GI frame work withj screws overGI primer channel 0.55 mm thick with two unequal flanges of 20 and 30 and web of 27 mm fixed to surrounding wall using nylonsleevesand screws 450 mmcentre to centre/ intermediate channels 0.9mmthick having two equal flanges of 15mm each and web of 45 mmsuspended from soffits at approx 900 mm centre to centre with GIcleat and steelexpansion fashners withand including ceiling section ( not exc 1.2 m length) of 0.55 mm thickness having kurledweb of50 mm andflanges of 26 mm each with lips of 10.50 mmfixed to the intermediatechannels with connectingclips across the intermediate channels at 475mm centre to centre including hanger 4mm dia GI (upto 1200 mmlength ) adjusting level fixed to roofslab by mensof ceiling cleatsmade out of GI flat 40x3 mm size 60 mm long as specified and directed, including dismantling of any type of ceiling boards of anythickness incl cover fillets & frame work complete all as specified and directedMake - Arm Gyp -FB ceiling ( Armstrong) Model - Steel ( Alpha life) orequivalent make as specified in Appx \"C\" of Particular Specifications |
| 12 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 13 | M&L for providing precast cement concrete, 1:2:4 type B-0 (using 12.5 mm graded aggregate) louvers and jali including all mouldings etc, set in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L for brick work with sub class \"B\"old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6,including demolition of old brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles and removing demolished material from site to out side MoD land complete all as specified and directed. |
| 15 | M&L for squared rubble stone walling,regular coursed well bonded, bedded and solidly hearted, built in cement mortar (1:6),complete all as specified and directed. |
| 16 | M&L for rendering in two coat on stone masonry surfaces or surfaces other than fair face of brick work (first coat 15 mm thick incement mortar 1:6 and second coat 10 mm thick in cement mortar 1:4), mixed with liquid WPC @ 200ml per 50Kg cement (if ordered)finished the surfaces fair and even complete all as specified and directed.Note:- WPC shall be measured and paid separately under respective item. |
| 17 | M & L for rendering 15mm thickon fair faces of stone masonry wall/ brick masonry / Concrete surfacesin cement mortar 1:6mixed with liquid WPC @ 200ml per 50Kg cement (if ordered), finished the surfaces fair and even complete all as specified & directed.Note:- WPC shall be measured and paid separately under respective item. |
| 18 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed. |
| 19 | M & L for preparation of new wall surfaces & applying1mm thick on newly plastered surface and applying two coat of interior emulsion paints over a coat of wallprimer complete all as specified and directed. |
| 20 | M & L for applyingtwo coats exterior emulsion weather proofpaint over one coat of exterior wall primer including preparation of newly plastered wall sufaces complete all as specified and directed. |
| 21 | M&L for preparation of old treated surfaces of wall for finishing coat (s) of paint in following steps:-Step (i):- Complete removal of existing treatment by mechanical means with entire satisfaction of Engineer-in-Charge.Step (ii) :- Applying 2mm thick wall care putty (in one or two coats as per requirement or as directed by Engineer-in-Charge) and making surface smooth and clean using sand paper of appropriate grade with entire satisfaction of Engineer-in-Charge.Step (iii) :- Applying one coat of wall primer (interrior /exterior as applicable). |
| 22 | M & L for applying two coat of interior emulsion paint on primed surface complete all as specified and directed. |
| 23 | M & L for applying two coat of weather proof exteriorpaint on primed surface complete all as specified and directed. |
| 24 | Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed. |
| 25 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor (50 to 100mm thick) complete all as specified and directed. |
| 26 | M&L for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graged stone aggregate) as levelling course in floors finished surface rough to receive the tilescomplete all as specified and directed. |
| 27 | M&L for75 mm thick PCC 1:3:6 type, C1 (using 20mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade over and including 15mm thick screed bed layer in CM 1:6 complete, complete all as specified and directed. |
| 29 | M&Lfor glazed ceramic coloured tiles on vetical surfaces size 600x300x7mm to 8 mm thick over & including 10mm thick renderingin CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete, complete all as specified and directed. |
| 30 | M&L for vitrifed ceramic tile, light shade 10 mm thick (square/rectangular) polishedarea of each tile exc 0.18sqm but n exc.0.36 sqm as in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete, complete all as specified and directed. |
| 31 | M&L for vitrifed ceramic tile, light shade 10 mm thick (square/rectangular) polishedarea of each tile exc 0.18sqm but n exc.0.36 sqm as in dado / skirting , set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over & including 10mm thick rendering in CM 1:4 complete, complete all as specified and directed. |
| 32 | M& L for 60mm thick machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006, M-35 grade, laid over and including 25mm thick stone dust cusioncomplete, complete all as specified and directed. |
| 33 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters(with out taking off shutters from the frames) complete all as specified and directed. |
| 34 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters(with out taking off shutters from the frames) complete all as specified and directed. |
| 35 | S&F factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVCsheet cut at corner and jointed with 02 Nos 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed. |
| 36 | S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm plain colour PVC sheet on back face,incl 03 Nos 100mm size stainless steel butt hinges for each shutter, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 37 | S&F powder coated anodised aluminium ventilator shutters, half portion will be fixedwith 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion, aluminium sections weighing 0.55 kg/m complete all as specified and directed. |
| 38 | S&F aluminium windows and ventilatorssliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plainglass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm diaetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm } |
| 39 | S& Fglazed (5.0 mm thick plain /coloured glass)aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floorDoor shutter consists of top rail size is 83 x 44 mm , bottom rail &lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mmwith handles 2 Nos in each door , hinges has fitted on frame as requiredfixed with rubber gasket & aluminum beading any No of panels with aluminum handle , incllocking arrangemen(with locks) ,Hydarullic door closure ,floor spring and floor door stopperincl. necessary joining cleats , glazing clipsetc complete all as specified and directed. (Al. section thickness 2 mm} ) confirming to IS. |
| 40 | S&F Aluminium powder coated fixed glazing of section of size 100mm x 44mm x 1.5 mm thick including necessary clips, standard aluminium bead and rubber packing, to receive 12mm thick prelaminated particle board or 5mm thick tinted glass complete all as specified and directed |
| 41 | M&L for PCC 1:3:6type C-1 (using 20mm graded stone aggregates) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of old cement concrete in any position and removing rubbish from site complete all as specified and directed. |
| 42 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screwscomplete all as specified and directed |
| 43 | S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screwscomplete all as specified and directed |
| 44 | M&L for 18mm to 20 mm thick Granite slabof any shade( table rubbed and polished ) machine cut for floor /shelvesin steps, jambs, pillars, window cills& cooking plateforms over and including 15 mm thick cement mortor 1:4, pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabs,laid bedded and pointed in any mortor complete all as specified and directed |
| 45 | M&L for rounding to the edge of stone slabs oneedge (full round)such as in steps, cooking plateform and other similar situations complete all as specified &directed. |
| 46 | S & F in repair Rotational moulded poly-ethylene double layered, ISI marked water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including 20mm dia PVC float valve assembly and required all fittings (tank nipple etc) complete all as specified and directed. |
| 47 | M&L for cutting chases, pinning in, Stone, concrete block or slab wallsfor concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 20cm girth complete all as specified and directed. |
| 48 | S&F 15mm nominal bore uPVC tubing having PN16 rating for plumbing with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down 15 mm diaGI tubing and connectioncomplete all as specified and directed. |
| 49 | All as per item No. 48 above but 20mm nominal bore tubing. |
| 50 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams) complete all as specified & directed. |
| 51 | S& Fin repairs looking mirror ofselected quality glass 5 mm thick mounted on 6 mm thick water proof plywood with designer beading frame,fixed to wooden/pvc plugs with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 52 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed. |
| 53 | S&F in repairvitreous china squatting pan \"Orrisa pattern\" size 580x440mmwhitewith integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etccomplete all as specified and directed. |
| 54 | S & Fin repair PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets, complete all as specified and directed. |
| 55 | S&Fin repair vitreous china wash hand basin white flat back of size 550mmx400 mm (overall) and including cutting for and pinning in end of brackets,32 mm brass CP waste fittings with long screwed shanks and fly nuts, and flush pipe of polytethylene low or high density PVC 32 mm dia waste pipe and centrally fixed brass chroium plated 15 mm bore pillar tap fancy type complete all as specified and directed. |
| 56 | S&F in repair vitreous China under counter basin (Wash basin) oval shapesize 190 x 550 x 430mm with brass coupling and suitable Outlet PVC waste pipe complete all as specified and directed . |
| 57 | S&F in repair bib taps, cast copper alloychromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed. |
| 58 | S & F in repairs brass chromium plated shower rose 150mm dia/size fancy typewith or without swivel joints, including fixing to steel pipe complete all as specified and directed. |
| 59 | S&F in repairs 15 mm bore Cast copper alloy chromium plated wall mixer for mixing hot & cold water, screwed down for iron pipe & fixed complete all as specified and directed. |
| 60 | S & F as in repairs Single lever basin mixer without popupwaste and 450 mm long braidedHoses suitable for 15 mm bore iron pipe complete all as specified and directed. |
| 61 | S&F in repair PVC connections 15mm bore size 450 in length with high quality brass nuts complete all as specified and directed. |
| 62 | S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, screwed down, high pressure,with scrutch or butter flyhandle screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 63 | S&F in repair 15mm bore C P bib taps, cast copper alloyfencytype two way with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 64 | S&F in repair ABS body CP Hand shower (Health faucet) , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. |
| 65 | S&F 25 mm bore SS Pipecurtain rods including SS Brackets & SS Decorative dome, suitablefor door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each endandfixed to wallincluding taking down of existing rod and making good disturbed surfaces to match the existing etc complete all as specified and directed. |
| 66 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedlaid in trenches or in floors complete all as specified and directed. |
| 67 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedandfixed to wallscomplete all as specified and directed. |
| 68 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedlaid in trenches or in floors complete all as specified and directed. |
| 69 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 70 | S&FPVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 71 | S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed. |
| 72 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 73 | S&F PVC (SWR) bends 75 mm dia with accessable doorcomplete all as specified and directed. |
| 74 | S&F PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequalwith acess door complete all as specified and directed. |
| 75 | S&F PVC (SWR) 75 mm diajunction, single(single \"T\")equal or unequalcomplete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 77 | S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement etc. complete all as specified and directed. |
| 78 | Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 79 | M&L for concealed point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm,ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description complete all as specified and direcited. Note:-(i) Wiring cable shall be provided using colour coding such as Phase -Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chassing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 80 | All as per item No. 79 above but point wiringfor one5 Amp independent socket point controlled by one switch with 2.5sqmm wiring cable. |
| 81 | All as per item No. 79 above but point wiring for one 3 pin ,5 Amp socket point with other switch on the same boardwith 2.5sqmm wiring cable. |
| 82 | All as per item No. 79 above but point wiring for one 5/6 pin, 15/16A socket outlet with 2.5sqmm wiring cable. |
| 83 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 84 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 85 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 86 | S&F socket outlet modular 6/16 Amp, 2/3 pin combined ,2 module 230 Voltcomplete all as specified and directed. |
| 87 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 88 | S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 89 | S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed. |
| 90 | S&F MCB single pole (SP) 6 Amp to 32 Amp, 240 Volt, 10 KA, C-curve connected with suitable lugs complete all as specified and directed. |
| 91 | S&F MCB single pole (SP) 40/60 Amp, 240 Volt, 10 KA, C-curveconnected with suitable lugs complete all as specified and directed. |
| 92 | S&F MCB SPN 63 Amps,240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 93 | S&F sheet metal enclosuredistribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DBcomplete all as specified and as directed. |
| 94 | S&F sheet metal enclosuredistribution board (DB) double door, IP-43, SPN, 4 way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DBcomplete all as specified and as directed. |
| 95 | M&L for concealed sub main wiring with 2 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade FRLSH cable of size 4 sqmmdrawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc including continuous earth lead cable of similar description and taking down old unserviceable sub main wiring with conduit complete all as specified and as directed.Note:-(i) Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc conduit shall be measured as one unit length.(ii) wire cable shall be provided as per colour coding. |
| 96 | S&F double door metallic sheet metal enclosuredistribution board (DB), VTPN , 4 Way 415 Volts with 200 Amps rated bus bars, including taking down existing DBcomplete all as specified and as directed. |
| 97 | S&F MCCB, 100 Amps 4 pole, 415 V,16 KA complete all as specified and as directed. |
| 98 | S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket, including taking down existing box with accesoriescomplete all as specified and as directed. |
| 99 | S & F LED tube light fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing& integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PChousing in opeal finish coverwith high brighness complete all as specified and as directed. |
| 100 | M&L for Earthing complete with galvanised steel earth plateelectrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the costof the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
| 101 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 102 | S&F exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper wound, sweep 250MM complete all as specified and directed. |
| 103 | S&F electric water heater (Geyser) ISI marked 25 Ltrs capacityAC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of new nut bolt/fastener on wall and making good disturbed surface complete all as specified and directed.Note: Making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 104 | S&F LED bulb 15 wattsuitable for angle / batten holder fitting complete all as specified and directed. |
| 105 | S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 106 | S&F in repair Conventional recess mounted fitting to LED 2 X 2 ultra slip recess mountedluminaire with high brightness 36 Watt LED packageand Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable forarmstrong/grid ceiling complete all as specified and directed. |
| 107 | S&F in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 108 | M&L for bracket for street/security/bldg/flood light made of 40 mm diamedium grade GI pipe of length not less than 1.5 Mtr long and bent to a shapeincl fixing on pole / wallwith 02 Nos MSflate clampof suitable size incl nut bolt and washers, including taking down existing Bracket with clamp complete all as specified and directed. |
