Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 2 | M&L for Rendering10 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces/fins/facia/ etc complete all as specified and directed. |
| 3 | M & L for 1.50 mm thick cement based wall care putty on wall/fins/facia/concrete new plastered surfaces for smoothness of surfacesincluding rubbing sanding with sand paper complete all as specified and as directed. |
| 4 | M&L for preparing new plastered or unplastered surfacesputty prepared surfaces of walls, fins/facia/concrete surfaces and applying one coat of interior primer over two coats of oil emulsion distemperingcomplete all as specified and directed. |
| 5 | M&L for complete removal of existing treatment of wallswith mechanical means/grinders etc and applying two coat ofcement based putty (JK/Birala wall care putty) to make surface smooth including rubbing and sanding with sand paper and applying one coat of interior primer overtwo coats distemper oil emulsion (any tint)complete all as specifiedand directed. |
| 6 | M&L for Rendering5 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on ceiling surfaces or concrete surfaces/fins/facia/ etc complete all as specifed and directed. |
| 7 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash incl filling of holes/ cracks etc with wall putty complete all as spd and directed. |
| 8 | M&L for preparing old plastered or unplastered surfaces of ceiling of any descriptionand applying two coats of white wash incl filling of cracks/holes for smoothness of ceiling surfaces with cement base wall care putty and sanding with sand paper complete all as specified and directed. |
| 9 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for non skidceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 11 | All as per Sl item No 10 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 12 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 13 | M&L for Glazed ceramic tilesof size 300 mm x 450 mm x 7mm thick (coloured) of superior qualityfixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4)and pointed in coloured cement to match the colour of tile complete all as specified and directed. |
| 14 | M&L for non skidceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 15 | M&L machine cut cuddappa stone slab 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 16 | M&L for Granite work(of any type) first quality Z black 20 mm thick(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.Gr |
| 17 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 18 | M&L for Machine cut kota stone slab flooring18-20 mm thick (size 595 x 595mm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 19 | M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 20 | M&L for chequered cement concrete tiles 30cmx30cmx25mm thick Rubber moulded with grey cementandpigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 21 | M&L for Cement concrete as PCC 1:4:8type D-2 using (40mm graded stone aggregate) as foundations, filling and mass concrete complete all as specified. |
| 22 | Taking down shutters of any description exc 1 sq.m and n exc 2 sqm eachcomplete all as specified. |
| 23 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 24 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm single rebatecomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | S&F 35mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 28 | S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauge etc size of members of shutter as specified in SSR part-I, section 8, clause 8.24 (a) complete all as specified and as directed. |
| 29 | S&F powder coated aluminium sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, aluminium three track chowkhats, aluminium snap beading, screws, suitable handle etc with and including black tinted sheet glass of 4 mm thick and incl stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperature 1.40 mm, sliding window shutters aluminium sections weighing not less than0.55 kg/m and size of three track chowkat frame will be 101.6x44.45mm and thickness of aluminium member shall not be less than 1.40 mm thick complete all as specified and directed. |
| 30 | S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 31 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 32 | S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 33 | M&L 75mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection laid in alternate bays finished even and smooth, without using extra cement as directed. |
| 34 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 35 | S&F 125mm size hasp and staple aluminium anodished, safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screws all as specified and directed. |
| 36 | S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 37 | S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 38 | S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 39 | S&F for 75mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 40 | S&F Extruded aluminium alloyhandles, fabricated type, anodised 150 mm long anodized handle complete all as specified and as directed. |
| 41 | S&F 100 mm long stainless steel handles, fabricated type polished for modular kitchen and cupboard all as specified and directed. |
| 42 | M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 43 | S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding to pressed steel chowkats omplete all as specified and as directed. |
| 44 | S&F for magnet catches with striking plate for closing of cupboard shutters/kitchen cabinet etc complete all as specified. |
| 45 | M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 46 | M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 47 | S&F 30 mm width of flaps (When open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixed with star headed screws complete all as spd and directed. |
| 48 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 49 | S&F in repairs 25mm dia stainless steel curtain rod complete all as specified. |
| 50 | S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected quality 5mm thick glass, mounted over PVC framing as per sample complete all as specified and directed. |
| 51 | S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding fixed complete all as specified. |
| 52 | S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. |
| 53 | S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 480 mm with pedestal including brackets / fasteners bolt etc with 32 mm dia CP Waste fittings, brass, chromium plated with PVC waste pipe complete all as specified and directed. |
| 54 | S&F in repairs Chromium plated wall mixer 2 in 1 , with wall cap of CP Brass, and connection for shower screwed down, screwd foriron pipes 15mm bore complete all as specified and directed. |
| 55 | S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. |
| 56 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. |
| 57 | S&F in repair 15mm bore long body Bib taps chromium platedfancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed. |
| 58 | S & F in repair long shank fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed. |
| 59 | S&F in repair 15mm bore short body Bib taps chromium platedfancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed. |
| 60 | S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and as directed.. |
| 61 | S&F in repair CP fancy type stop/angle valves, cast copper alloy, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified and as directed. |
| 62 | S&F in repair sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 63 | Dismantling of water tanksany type (RCC hume Pipe/PVC/ferroconcrete water tank)including disconnecting all connections etc. completecapacity of tanks 500 ltrs complete all as spd and directed. |
| 64 | Disconnecting existing tanks, setting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 65 | S&Frotational moulded polyethylene water storage tank (cylindrical/vertical with closte top) tripple layer hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore completecapacity of tank500 ltrs incl tank nipple and fittings complete all as spd and directed. |
| 66 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 67 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 68 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 69 | S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone, concrete block or slab, wall pinning in making good to facing wherever required to the sufaces for concealed water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : Cutting chases & CPVC fittings shall deemed to be included in the quoted rates and No extra payment shall be made) |
| 70 | S & F 20mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. Note : Cutting chases & CPVC fittings shall deemed to be included in the quoted rates and No extra payment shall be made) |
| 71 | S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : Cutting chases & CPVC fittings shall deemed to be included in the quoted rates and No extra payment shall be made) |
| 72 | S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed. |
| 73 | Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed. |
| 74 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 75 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 76 | All as per item No 75 here in before but except pipe complete all as specified and directed. |
| 77 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 78 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 79 | All as per item No 78 here in before but except pipe complete all as specified and directed |
| 80 | S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. |
| 81 | S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 83 | S&F PVC (SWR) bend any radius 75mm complete all as specified and directed. |
| 84 | S&F PVC (SWR) bend any radius 110mm complete all as specified and directed. |
| 85 | S & F in repair PVC (SWR) floor trap 75 mm boreplain with grating including jointing with solvent cement and fitting complete all as spd and directed. |
| 86 | S&F in repair stainless steel soap dish, complete all as specified and as directed. |
| 87 | Cutting chases in Stone, concrete block or slab, walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10cm girth all as specified and as directed. |
| 88 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 89 | S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework for water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. |
| 90 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n.exc 500m, preparation of surface by cleaning to remove loose particles, dust, latance etc, incl replacement of floor trap 75 mm bore with CP grating and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421 and applying one coat each of Nitoproof 100 priming [email protected] Ltr/5.0 Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1.0 Ltr/2.5 Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, for Bath and WC complete all as specified and as directed. |
| 91 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc,inclreplacement of floor trap 75 mm bore with CP grating complete , and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming [email protected] Ltr/5.0 Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1.0 Ltr/2.5 Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, for kitchen or area of floor upto 0.50 Sqm complete all as specified and as directed. |
| 92 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work. |
| 93 | M & L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas complete all as specified and as directed. |
| 94 | Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete complete all as specified and as directed. |
| 95 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 96 | Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. |
| 97 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 98 | M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 99 | M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement shall be measured and paid separatly)all as specified and directed. |
| 100 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and as directed. |
| 101 | Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. |
| 102 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 103 | M&L for PCC (1:5:10) type E2, using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 104 | M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and as directed. |
| 105 | Taking down carefully existingunserviceable bitumen felt/ APP membrane including plaster/padding (any number of layers ofanythickness of plaster or padding ) etc and removing of the rubbish to a distance not exceeding500m from the building and depositing complete all as spd anddirected . |
| 106 | M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm complete all as specified andas directed . |
| 107 | M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified @ 200 mlper 50 Kg of cement.Note: Water Proofing liquid shall be measured and paid separately. |
| 108 | Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. |
| 109 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm.ii) Providing and laying3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer\"s.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer\"s instructions and as directed . |
| 110 | S & F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as spd and directed. |
| 111 | S & F 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete incl all fittings, bend, elbow, tee etc as required to and fixed with clamp etc towalls, ceilings or in floors etc complete all as specified. |
| 112 | M & L for complete removal of existing treatment from walls/fins/facia/chajjas etc on old surfaces incl filling of holes/cracks with cement based exterior wall care putty andpreparation ofsurface and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exteriour primer, exteriour weather proof offer anti algae high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior emulsion apex, should be able to spray in hard to reach areas and penetrationon the surface to achieve excellent application using limited manpower of any tintcomplete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total). |
| 113 | Notes for Periodicals :- Passing of work in stages, conractor shall get passed following stages for each Qtr wise by the Engineer-in-charge in following orders before progressing to the next finishesand rate quote shall deemed to be included and no extra rate shall be paid on account of this. Contractor shall quote their rate accordingly:-(a)After complete removal of existing treatment on walls/ceiling/ facia/ parapet etc (b) JK /Birla wall care putty each coat on walls/ceiling/facia/parapetetc.(c) Application of primer (d)1st coat of Exterior emulsion/acrylic emulsion.(e) 2nd coat of Exterior emulsion/acrylic emulsion. |
| 114 | M&L for Rendering15 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces even and smooth without using extra cement complete all as specifed and directed. |
| 115 | M&L for preparation of new plastered surface of wall/fins/facia/chajjas etc incl filling of cracks/holes with cement based exterior wall care putty and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior wether proofoffer anti algae high performance exterior emulsion apex wall finish with 05 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior emulsion apex, should be able to spray in hard to reach areas and penetration on the surface to achive excellent application using limited manpower of any tint complete all as specified and directed. Make : Asian (Apex ultima), Berger (Weather coat), Nerolac (Excel total). |
| 116 | M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded, prepolished with strength 35 N/Sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 117 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 118 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate completeall as specified and directed. |
| 119 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required andcost of the same shall be deemed to be included in quoted rate complete all as specified and as directed. |
| 120 | S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. |
| 121 | S&F SS heavy duty decorative brackets/wall to wall bracket (in pairs) where required suitable for 25mm dia curtain rod (minimum projection from wall 100 mm) fixed in wall including drilling, rawl plug, star screws and decorative side funnels (in pairs) etc complete all as specified and directed.Note: Curtain rod shall be measured and paid separately |
| 122 | Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittingsand making good disturbed surfaces of walls, floor etc.complete all as directed. |
| 123 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone concrete or stone walls complete all as specified and directed |
| 124 | Point wiring complete with 1.5 Sqmm (nominal area) unsheathed multistranded FRLScopper conductor inPVC concealed conduit including fittings and accessories with one run of continuous PVC insulated stranded FRLS copper cable conductor of same size as in phase/neutral cable connecting to common earth dolly including sunken terminal box and plastic laminated sheet top cover for mounting of switches, sockets, regulators etc. for one light point, bell point controlled by one switch , fan point controlled by one switch through regulator complete all as specified and directed for following:- |
| 125 | (a) One light point controlled by one switch. |
| 126 | (b) One fan point / Exhaust fan point controlled by one switch |
| 127 | (c) One 3 pin socket outlet, 5 Amps on the same board. |
| 128 | (d) One 3 pin socket outlet, 5 Amps on the independent board |
| 129 | (e) One bell/ buzzer point controlled by one push button |
| 130 | (f) One light point controlled by two, 2 way switches |
| 131 | All as item No.123 here in before but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire. |
| 132 | Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied . |
| 133 | Supply and fix switch piano flush type single pole 2 way 5 Amps complete all as specfied |
| 134 | Supply and fix Bell push button SP 5 Amp, flush type complete all as specified |
| 135 | Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. |
| 136 | Supply and fix switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed. |
| 137 | Supply and fix switch socketcombination 2 in 1, 3 pin, 6 and 16 amp flush type universal complete all as specified and as directed. |
| 138 | Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. |
| 139 | S & F oflampangle/batten holderBakelitecomplete all as specified and as directed. |
| 140 | S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj |
| 141 | S & F Decorative wall light fixture made up of Polycarbonate, suitable for and including 9 W retrofit LED Lamp B22 base. Make Havels, model- LHDL06160099 (CITY 3) |
| 142 | Supply and fix fan regulator 100 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc completeall as specified and as directed. |
| 143 | Supply and fix sheet metal enclosure DBs SPN 8 way, double door, 240V with 200 Amps rated bus bars complete all as specified and as directed. |
| 144 | Supply and fixMCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed. |
| 145 | Supply and fix MCB SPN32 to 40 Amps, 240 volts complete all as specified and as directed. |
| 146 | M & L for sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed, multi stranded copper conductor FRLScable 1100 Volts grade, incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC conduitsNote :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length. |
| 147 | M & L for bracket made out of GI tubing 32 mm dia, light grade 0.75 mtr long including fixing withMS clamps -2 Nos made out of 25 mm wide 2.5 mm thick flat iron with M.S nuts bolts-04 Nos with flat washer 3mm thickfor each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as directed at site. |
| 148 | S&F ENDURA PEARL 25 W MP New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 Make. Havells, Model- ENDURAPEARLSL20WLED757SASYTOPCMP |
| 149 | M&L for earthing with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified. |
| 150 | S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed (in 240 V) |
| 151 | Taking down carefully ceiling fans 1200 mm to 1400 mm sweep, keeping in safe custody painting with 2 coats of white enamelled paint & refixing the same after completion of B/R work all as specified and as directed (Note: minor accessories like capacitors, flexible wire, connector & hanging clamps with rubber bush and 02 Nos nut and bolts is deemed to be included in rate quoted) |
| 152 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cuting hole in wall for instalation of exhaust fan is deemed to be included in rates quoted) |
| 153 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers (cuting hole in wall for instalation of exhaust fan is deemed to be included in rates quoted) |
| 154 | Supply, install, testing & commissioning of factory made LT panel wall mounted board made outof CRCA sheet 2 mm thick indoor type totally enclosed weather, dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for phase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals, insulated with PVC sleeves, space for fixing single phase KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels, rubber gaskets, locking knob, hylem sheet piece, PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessories including taking down old unservicable LT panel board |
| 155 | INCOMING- a) MCCB 415 V 4 POLE 18 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 NosOUTGOING-a) MCB SPN 32Amps, 230V, 10 KA, C-curve - 05 Nosb) Providing space for and refixing existing single phase KWHelectric enery meter-04 Nosc) Copper wire 6 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter readingNote:-1. Cost of taking down electric meters from old unserviceable panel board, keeping in safe custody and refixing the same electric meters in new panel is deemed to be includede in rates quoted. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
