Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-02-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-02-2026 |
| 2 | 07-02-2026 | AMENDMENT TO BOQ 8796 | BOQ | 19-02-2026 |
| Sl. No. | Item Description |
| 1 | Material and labour for repairing of roof, chajjas etc with and including comprising of the following steps :-(a) Cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting. (b) Removing loose concrete from surface cracks and then filled with Dr Fixit crack X paste in two coats or polymer modified mortar in case of wider cracks (above 5 mm width)(c) Applying priming coat of Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sqft/ltr and then allow it to dry for 3-4 hrs (d) Applying three coats of Dr fixit roof seal top coat (without diluted) at the rate of 24 Sqft/ltr in each coat with perpenducular direction to the previous coat embedded a 50 GSM non-woven needle punched fleece between the first and second coat as reinforment and third coat will be the top final coat including allow to dry for 2-3 hrs for each coat etc complete all as specified and as directed by Engr-in-Charge. Note: Work shall be carried out through authorised applicator of the manufacturer.Make : Dr Fixit (Roof seal) / Asian Paints (Infinia) / Equivalent make as approved by GE. |
| 2 | Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed. |
| 3 | Material and labour for Brickwork with fly ash Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed. |
| 4 | Material and labour for Brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wallin CM(1:6)complete all as specified and as directed |
| 5 | Taking down cement plaster on brick or stone wall,concrete, etc including all types of finishes like heritage natural grit etc, racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 6 | Material and labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 7 | Material and labour for Rendering 15mm thick on fair finish of bricks/concrete/stonesurface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed. |
| 8 | Material and labour for repairs to ends of chajja by removing old loose concrete material, cleaning the reinforcement and finishing the surface by applying the epoxy based resin of manufacturer pedicrete and chouksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint over a coat of primer up to 600 mm depth and 100 mm thickness including necessary scafolding and formwork as required at site up to 15 mtr height etc. complete all as specified and as directed. |
| 9 | Material and labour for rendering 5 mm thick in CM 1:3 on concete surfaces, finished even & smooth with out extra cement in ceiling complete all as specified and as directed. |
| 10 | Supply only integral water proofing compound ISI Marked complete all as specified and directed. |
| 11 | Material and labour for preparation of new plastered surfaces of walls and applying 1 mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed. |
| 12 | Material and labour for complete removal of existing treatment of wall surfaces and applying 1 mm thick wall care puttyin two layers of opposite direction and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed. |
| 13 | Material and labour for prepartion of old plastered/unplastered surface of walls incl cornices, pilasters etc & applying two coats of white wash on walls complete all as specified and as directed. |
| 14 | Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company DepotTinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding if required at site complete all as specified and as directed.Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication).Note :- Shade and pattern of the colour to be approved by GE. |
| 15 | Material and labour for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding complete all as specified and as directed. |
| 16 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm after repair of damaged/cracked area by applying wall care putty to achieved smooth surface etc complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding over complete removal surfaces complete all as specified and as directed.Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication). NOTE: The quoted rates shall deemeed to be included cost for provn of all safety instruments/scafolding/material & saftey of men, insurance etcall are contractor\"s responsibility. |
| 17 | Material and labour for preparation of newly plastered surfaces of ceilings and applying 1 mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two coats of distemper oil emultion over one coat of primerpaint roller complete all as specified and as directed. |
| 18 | Material and labour for preparation of new plastered surfaces of ceiling and applying 3 coats of white wash complete all as specified and as directed. |
| 19 | Material and labour for complete removal of existing treatment of ceiling surfaces and applying 1 mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two coats of distemper oil emultion over one coat of primerpaint roller complete all as specified and as directed. |
| 20 | Material and labour for prepartion of old plastered/unplastered surface of ceiling & applying two coats of white wash on walls complete all as specified and as directed. |
| 21 | Material and labour for Peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and as directed. |
| 22 | Material and labour for Peparation of old painted steel surfaces of any description over 10cmwidth or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 23 | Dismantling of stone stabs & tiles of any description or thickness in floor, aprons etc and bedded & pointed in cement mortar and disposing off debris to a distance up to 250 m complete all as specified and as directed. |
| 24 | Material and labour for Granite(of any type) work (table rubbed and polished) 18 to 20 mm thickin steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and as directed. |
| 25 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 27 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.Note : - All demolished items/ debris to be removed out side of MoD land. |
| 28 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed. |
| 29 | Supply and fixing premium quality any shade vitrified digital tiles 8-9 mm thick (square/ rectangular) polished area of each tiles n.exc 0.36 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 30 | Supply and fixing premium quality any shade vitrified digital tiles 8-9 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and as directed. |
| 31 | Material and labour forpremium quality non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and as directed. |
| 32 | Material and labour for premium quality glazed ceramic coloured tiles of approved quality ISI marked (600 X 300X7 mm / 450 x 300 x 7 mmthick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface all as specified and directed. |
| 33 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed 20 mm thk in cm 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and wax polishing complete all as specified and as directed. |
| 34 | Material and labour for marble work 18 to 20mm thick (table rubbed and polished) in floors for border work in kota stone flooring, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade over 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.Note : Shade and tint of marble shall be approved by GE. |
| 35 | Material and labour for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed withwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and wax polishing complete including 10 mm thick plasteing in cement mortar (1:4) as a backing etc complete all as specified and as directed. |
| 36 | Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and as directed. |
| 37 | Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed. |
| 38 | Taking down or up 20 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and as directed. |
| 39 | Material and labour for refixing old steel tubing of 20 mm bore and connections in new or old position in walls, ceilings, floors, etc complete all as specified and as directed. |
| 40 | Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed. |
| 41 | Taking down or up 25 or 32 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and as directed. |
| 42 | Material and labour for refixing old steel tubing of 25 or 32 mm bore and connections in new or old position in walls, ceilings, floors, etc complete all as specified and as directed. |
| 43 | Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed. |
| 44 | Dismantling water tanks and removing to store (capacity exc 250 & n exc 500 ltrs) complete all as specified and as directed. |
| 45 | Refixing of dismantalled water tanks of 500 ltrs capacity with all fittings of GI including hoisted and fixed in position complete all as specified and as directed. |
| 46 | Supply and fixing 500 ltr capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 47 | Dismantling water tanks exc 500 ltr but n exc 1000 ltrs complete all as specified and as directed. |
| 48 | Refixing of dismantalled water tanks of 1000 ltrs capacity with all fittings of GI including hoisted and fixed in position complete all as specified and as directed. |
| 49 | Supply and fixing in repair Rotational moulded polyethylene water storage tanks of1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 50 | Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 51 | Supply & fixed in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and as directed. |
| 52 | Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed. |
| 53 | Supply and fixing in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as specified and directed. |
| 54 | Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and as directed. |
| 55 | Supply and fixingixed in repair vitreous chiana wash basin white oval type size 580x450 mm including , waste pipe and plug and porcelain stopper alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as specified and directed. |
| 56 | Supply and fixing in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and directed. |
| 57 | Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and as directed. |
| 58 | Supply and fixing in repairs vitreous china urinals, half stall type, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 59 | Supply and fixing in repair chromium plated concealed type stop valves (Weight not less than 575 gms), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed. |
| 60 | Supply and fixing Chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as in repairs complete all as specified and directed. |
| 61 | Supply and fixing in repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | Supply and fixing in repair chromium plated fancy type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed. |
| 63 | Supply and fixingin repairhand shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & wall hook complete all as specified and directed. |
| 64 | Supply and fixingin repair 2-way Bib cock with wall Flange, chromium plated, 15mm complete all as specified and as directed. |
| 65 | Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality. |
| 66 | Supply and fixing in repair soap dish brass chromium plated decorative type approximate size 160x90mm complete all as sfd and directd. |
| 67 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall. |
| 68 | Supply and fixing decorated type looking mirror of area not exceeding 2.00 sqm each, 6-8 mm thick of any size complete all as specified and as directed.Note : Design and pattern shall be approved by GE. |
| 69 | Supply and fixing of 600 mm X 450 mm size looking mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 70 | Demolition and breaking up drain pipes (salt glazed ware, AC, or PVC) set in cement mortar etc upto 100/110 mm internal dia of pipe. complete all as specified and as directed. |
| 71 | Supply and fixing 110 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall etc complete all as specified and as directed. |
| 72 | Supply and fixing PVC (SWR) bends any radius, 110 mm bore, complete all as specified and as directed. |
| 73 | Supply and fixing Tee suitable for 110 mm bore PVC (SWR) pipecomplete all as specified and as directed. |
| 74 | Supply and fixing PVC (SWR) vent cowl,110 mm bore complete all as specified anddirected. |
| 75 | Supply and fixing in repair 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal all as directed. |
| 76 | Supply and fixing 75 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall etc complete all as specified. |
| 77 | Supply and fixing of PVC (SWR) bends any radius of 75 mm bore pipes complete all as specified and as directed. |
| 78 | Supply and fixing Tee suitable for 75 mm bore PVC (SWR) pipe complete all as specified and as directed. |
| 79 | Material and labour for PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement including all necessary concrete work and connecting jobs for making good the area complete all as specified. |
| 80 | Supply and fixing of chromium plated bottle trap, 32/40 mm dia fancy type complete all as specified and as approved . |
| 81 | Supply and fixing 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 82 | Supply and fixing of stainless steel grating,100 mm dia, with waste hole, fixed in repairs, all as specified and directed. |
| 83 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as directed. |
| 84 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and as directed. |
| 85 | Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each complete all as specified and as directed. |
| 86 | Supply and fixing for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer\"s specifications and as directed. |
| 87 | Supply and fixing for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C\" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of \"C\" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed. |
| 88 | Supply and fixing pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc ccomplete all as specified and as directed. |
| 89 | Supply and fixing pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 90 | Material and labour for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and as directed. |
| 91 | Supply and fixing glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned) 2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, all as specified.Note : Wire gauge/glazing to be measured and paid separately. |
| 92 | Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 93 | Supply and fixing Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood complete all as specified and as directed. |
| 94 | Material and labour for preparation of new wood basesurfaces applying one coats of pink primer andtwocoats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed. |
| 95 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 96 | Taking down of shutters of any description exc 1 Sqm and n. exc 2 sqm each and refixing in same opening after resecuring or easing & adjusting etc complete complete all as specified and as directed. |
| 97 | Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 98 | Supply and fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 99 | Supply and fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed. |
| 100 | Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 101 | Supply and fixing for 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 102 | Supply and fixing mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate completeall as directedcomplete all as specified and as directed. |
| 103 | Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed. |
| 104 | Supply and fixing Door closer hydraulically regulated, designation No 3,aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed. |
| 105 | Supply and fixing in repairs of harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two Nos of brackets, stops for each rail complete all as specified and as directed. |
| 106 | Material and labour for aluminium framed doors/windows/ventilators/partions of any sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed. Note-: Glazing/gauzing shall be measured and paid separatly. |
| 107 | Supply and fixing 9 mm thick prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or with beading with metal framework etc complete all as specified and as directed. |
| 108 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 109 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 110 | Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed. |
| 111 | Supply and fixing sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to aluminium section complete |
| 112 | Supply and fixing sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete |
| 113 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed. |
| 114 | Material and labour for mild steel frame work such as gates, grills, frame work cooler stand with ends of barshouldered, welded or forged into spikes conforming to Fe 410-0all as specified and as directed. |
| 115 | Material and labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 116 | Material and labour forplain cement concrete Type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) in foundation, sub base, below floor, filling and mass concrete etc complete all as specified and as directed. |
| 117 | Material and labour forpolished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and as directed. |
| 118 | Material and labour for grinding and polishing of existing floor of stone slab like marble, granite, kota etc by using mechanical grinder/floor polish machine and finally cleaning and treating the surface with beeswax polish etc complete all as per mirror finish all as specified and as directed. |
| 119 | Material and labour for 4-5 mm dia GI wire to be fixed with existing walls in appropriate height by using anchor bolt fasteners and tightened etc complete all as specified and as directed . |
| 120 | E/M PORTION |
| 121 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified. |
| 122 | Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed. |
| 123 | Material and labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and as directed.Note: 3 run of 6 sqmm&one run of PVC conduit shall be measuredas single unit |
| 124 | Material and labour for sub main wiring (concealed) complete with two single core 1.5 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 1.5 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of1.5 sqmm&one run of PVC conduit shall be measuredas single unit |
| 125 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed. |
| 126 | Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in wallsby cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer coverof suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.(a) One light point controlled by one switch |
| 127 | (b) One fan point controlled by one switch |
| 128 | (c) One exhaust fan point controlled by one switch. |
| 129 | (d) One bell/ buzzer point controlled by one push switch. |
| 130 | (e) One switch socket outlet modular type 3 pin 6 amp on same board. |
| 131 | (f) One light point controlled by two, two way switches, |
| 132 | All as per item No 125 above but 1.5 sq mm cable sizeand 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board. |
| 133 | All as per item No 125 above but 2.5 sq mm cable sizewith 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board. |
| 134 | Note for Item No. 121 to 132 :-The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces.The rate for point wiring shall be deemed to include the cost of making good. |
| 135 | Supply and fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of complete all as specified and as directed.Make : CG Cat Part No. LSTS-25-CDL or equivalent in Bajaj/Wipro.Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed. |
| 136 | Taking down old Old u/s and Supply & Fix new master led tube 4ft20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structurehaving nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed.Make :CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro. |
| 137 | Supply and fixing Surface mounting LED Luminariesmirror light 9 Watt, 3 in 1 color LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmmsize complete all as specified and as directed .Make : Cat No : LM3C9Luker or equivalent in CG/Phillips,/Wipro/Bajaj |
| 138 | Supply and fixing 0-4 step, one module,modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole,complete all as specified and as directed.Make : Legrand Cat No. 675531 or equivalent in L & T/ Havells |
| 139 | Supply and fixing calling bell ding dong type , AC,single pole one way 230 volts complete all as specified and as directed. |
| 140 | Supply and fixingbell push switch, modular type, 6 Amps, 1 module, 230 volts complete all as specified and as directed. Make : legrand Cat No. 675504 or equivalent in L & T/ Havells |
| 141 | Supply and fixingswitch modular type single pole two way 6 amps 230 volts, all as specified and as directed.Make : Legrand Cat No 675502 or equivalent in L & T/ Havells |
| 142 | Supply and fixingSwitch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in L & T/ Havells |
| 143 | Supply and fixing socket modular type6 Amps 3 pin 2 module230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in L & T/ Havells |
| 144 | Supply and fixingfor ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. |
| 145 | Supply and fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in L & T/ Havells |
| 146 | Supply and fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in L & T/ Havells |
| 147 | Supply and fixingsheet metal enclosures for SPN DB\"s with metal double door for incorporating MCBs,IP-43 , 12 way, 240 volts, as per IS-8623 all as specified and as directed.Make : Legrand Cat No 507612 or equivalent in L & T/ Havells |
| 148 | Supply and fixingsheet metal enclosures for SPN DB\"s 2 way, 240 volts, as per IS-8623 all as specified and as directed. |
| 149 | Supply and fixingMCB SPN, 6-32 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 or equivalent in L & T/ Havells |
| 150 | Supply and fixing MCB SP 6-32Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. |
| 151 | Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store all as apecified and as directed. |
| 152 | Supply and fixing energy saving ceiling fan 1200 mm sweep min air delivery 210 CFMwith double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire ofsize 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. |
| 153 | Taking down exhaust fan of any size and any make,cable end, dismantling the fan blade and deposit the same to store all as apecified and as directed. |
| 154 | Supply & fixing new exhaust fan metal body300 mm sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. |
| 155 | Supply and fix \"D\" clamp after cutting the ceiling of roof and binding with reinforcement and making goodfinishing matching with existing surfaces, including anchor bolt having four nuts and washers for hanging of ceiling fans completeall as specified and directed. |
| 156 | Supply & fixing, testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflectoralongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
