|
| 1 | Removing the existing weathering course and pressed tiles |
| 2 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 3 | Paving the Top of roof with Solar refelective ceramic tiles of approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 4 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 5 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Flooring with Red cement plaster polished surface and thread lined |
| 7 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means |
| 8 | Playing Equipments |
| 9 | Supply and Fixing of Four Seater SeeSaw to a Height of 0.50 m with 80mm dia Leaver and 40mm top bar with MS pipes the seater of moulded plastic with heavy duty bush bearing the cost inclusive of all materials labours fixings etc., Complete as directed by the departmental officials. |
| 10 | Supply and fixing of double swing of height 2.40m with 40mm dia MS pipes support as legs and top bar is 50mm dia the seat is 9mm thick reinforced rubber with antiskit chequred top with heavy ball bearing and suspension is 7 mm dia electro galvaniced chain and the cost shall inclusive of all materials labours and fixing etc., complete as directed by departmental officials., |
| 11 | Supply and fixing of slide for below 12 years old childrens to a length of 3 m with 180mm dia leaver and 40mm top bar with MS Pipes A seaters of moulded plastic the ladder frame is made up of 25mm MS Pipes Handrails 20mm dia MS Pipe and the center support is 80mm dia MS Pipe the cost shall inclusive of all Materials Labours and fixing etc., Complete as directed by the departmental Officials. |
| 12 | Provision for GST at 18% Please Enable Macros to View BoQ information |
