|
| 1 | Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. DSR 2023 S.N. 2.6.1 |
| 2 | Excavating and laying and filling local earth (including royalty) by mechanical transport upto a lead of 10 km also including ramming and watering of the earth in layer not exceeding 20cm trenches,plinth,sides of foundation |
| 3 | Providing and laying in cement concrete 1:4:8(1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.DSR 2023 S.N. 4.1.8 |
| 4 | Providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttring, finishing and reinforcement-All work up to plinth level (1 cement :1.5 coarse sand (Zone-III) derived from natural source : 3 graded stone aggregate 20 mm nominal size derived from natural source) DSR 2023 S.N. 5.1.2 |
| 5 | Centering and shuttring oncluding strutting, propping etc and removal of form for foundations, footing, bases of columns etc for mass concrete DSR 2023 S.N. 5.9.1 |
| 6 | Reinforcement cement concrete work in wall (any thickniss) including attched pilaster, buttresses, plinth and string course, filests, columns,pillers.piers abutment ,post and strust above plinth lavel up to floor five level, excluding the cost of centering, shuttring, finishing and reinforcement-All work up to plinth level (1 cement :1.5 coarse sand (Zone-III) derived from natural source : 3 graded stone aggregate 20 mm nominal size derived from natural source) DSR 2023 S.N. 5.2.2 |
| 7 | Centering and shuttring oncluding strutting, propping etc and removal of form for foundations, footing, bases of columns etc for mass concrete DSR 2023 S.N. 5.9.6 |
| 8 | Reinforcement cement concrete work in beams< suspended floors, roof having slope up to 15 degree landing, balconies, sheves,chajjas, lintels,bonds,plain eindows sills, staircase and spiral stair cases above plinth lavel up to floor five level, excluding the cost of centering, shuttring, finishing and reinforcement-All work up to plinth level (1 cement :1.5 coarse sand (Zone-III) derived from natural source : 3 graded stone aggregate 20 mm nominal size derived from natural source)DSR 2023 S.N. 5.3 |
| 9 | Centering and shuttring oncluding strutting, propping etc and removal of form for foundations, footing, bases of columns etc for mass concrete DSR 2023 S.N. 5.9.5 |
| 10 | Reinforcement cement concrete work in beams< suspended floors, roof having slope up to 15 degree landing, balconies, sheves,chajjas, lintels,bonds,plain eindows sills, staircase and spiral stair cases above plinth lavel up to floor five level, excluding the cost of centering, shuttring, finishing and reinforcement-All work up to plinth level (1 cement :1.5 coarse sand (Zone-III) derived from natural source : 3 graded stone aggregate 20 mm nominal size derived from natural source) DSR 2023 S.N. 5.3 |
| 11 | Centering and shuttring oncluding strutting, propping etc and removal of form for foundations, footing, bases of columns etc for mass concrete DSR 2023 S.N. 5.9.3 |
| 12 | Steel reinforcement for R.C.C work including straghtening, cutting, bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of grade Fe-500D or more DSR 2023 S.N. 5.22.6 |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designtion 7.5 in foundation and plinth in Cement mortar 1:4(1 Cement :4 course sand) DSR 2023 S.N. 6.1.1 |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designtion 7.5 in supur structure above plinth level up to floor lavel in Cement mortar 1:4(1 Cement :4 course sand) DSR 2023 S.N. 6.4.1 |
| 15 | 20MM thick cement plaster (1:4) of mix. On Roof. DSR 2023 S.N. 13.6.1 |
| 16 | Half Brick masonary with common burnt clay F.P.S. (non modular) bricks of class designtion 7.5 in supur structure above plinth level up to floor lavel in Cement mortar 1:4(1 Cement :4 course sand)DSR 2023 S.N. 6.4.1+6.13.2 |
| 17 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35 * 35 * 5 mm, joints mitred and welded by angle iron 35 * 35 * 5 mm or 35 * 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.DSR 2023 S.N. 10.31 |
| 18 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35 * 35 * 5 mm, joints mitred and welded by angle iron 35 * 35 * 5 mm or 35 * 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.DSR 2023 SN 10.31 |
| 19 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top/centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)DSR 2023 S.N. 10.11.1 |
| 20 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)DSR 2023 S.N. 10.15.1 |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):21.3.1With float glass panes of 4.0 mm thickness (weight not less than 10kg / s * qm )DSR 2023 S.N. 21.3.1 |
| 22 | 15 mm cement plaster ion rough side of singlke half brick wall mix 1:4(1 cement : 4 coarse sand)DSR 2023 S.N. 13.5.1 |
| 23 | 12 mm cement plaster ion rough side of singlke half brick wall mix 1:4(1 cement : 4 coarse sand)DSR 2023 S.N. 13.4.1 |
| 24 | Providing and laying in cement concrete flooring 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 12.5 mm nominal size) and curing complete,including cost of form- work,in 25mm thick floors.DSR 2023 S.N. 11.3.1 |
| 25 | Water proofing cement paint DSR 2023 S.N. 13.44.1 |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:New Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023 S.N. 13.62.1 |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter DSR 2023 S.N. 12.41.2 |
| 28 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.DSR 2023 S.N. 11.37A |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .DSR 2023 S.N. 17.1 |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.DSR 2023 S.N. 17.7a |
| 31 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.DSR 2023 S.N. 17.22A |
| 32 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. DSR 2023 S.N. 18.51.1 |
| 33 | 15 mm nominal dia Pipes. DSR 2023 S.N. 18.8.1 |
| 34 | 20 mm nominal dia Pipes. DSR 2023 S.N. 18.8.2 |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR 2023 S.N. 18.48 |
| 36 | Supply of 2.0H.P. Submersible pump Compton greaves or I.S.I. Mark single phase including all charges etc. |
| 37 | Supply of 110mm dia P.V.C. pipe of approved quality I.S.I. Mark 6kg/ cm2 pressure including all charges etc. |
| 38 | Supply of 32 mm C.P.V.C. Pipe approved quality I.S.I. Mark. Including all charges etc. |
| 39 | Supply of Gate valve 32 mm. dia for control the pressure of water supply Including all charges etc. |
| 40 | 0 to 10 Boring 0 to 150 mm. dia in ordinary soil from 0-100mtr. by sinking method. Including all charges etc. |
| 41 | 10 to 20 |
| 42 | 20 to 30 |
| 43 | 30 to 40 |
| 44 | 40 to 100 |
| 45 | P/F Plastic Jaly including making strainer in 140mm Dia P.V.C. Pipe including all charges etc. |
| 46 | P/F 32 mm dia CVPC Pipe for water supply pump to water tank including all charges etc. |
| 47 | S/O pea-gravel including all charges. |
| 48 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash. SI No. 138 C |
| 49 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. SI No. 140 C |
| 50 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. and piano type switch and socket etc., complete in all respect including matching colour wash. SI No. 141 C |
| 51 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. SI No. 1139 |
| 52 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.. SI No. 1203 A |
| 53 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit etc, complete in all respects including matching colour wash. SI No. 1307 C |
| 54 | S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge.. S.I. No. 1024 A Cat B |
| 55 | S&F of 6-32 Amp SPMCB (10 KA) C Curve SI No. 1002 Cat A |
| 56 | S&F of 6-32 Amp. DP MCB (10 KA) C Curve SI No. 1009 Cat A |
| 57 | Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm& brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. SI No. 1149 |
| 58 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing. SI No. 701 |
| 59 | Supply of ceiling fans with fan motor of A.C permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltge 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 star 1200 mm sweep SI No. 1501 (i) |
| 60 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. SI No. 1116 |
| 61 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. SI No. 1413A Cat A |
| 62 | Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm Cu Wire SI No. 189A |
| 63 | LED Bulb 9W (EESL) |
| 64 | ADD GST 18 PERCENT Please Enable Macros to View BoQ information |
