|
| 1 | Earth work in Excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ),including getting out the excavated soil and disposal of surplus earth upto 50 m including dressing of sides and ramming of bottoms, lift upto 1.5 m as directed by Engineer-in- Charge as per dar-2.8.1FoundationSeptic Tank ALL WALLSoakpit |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded Stone aggrigate 40 mm nominal size ) i/c supply of ALL materials Labour AND T& P and curing complete. Also i/c cost of formwork in foundation &floorsFoundationSeptic Tank ALL WALLSoakpit |
| 3 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizont al level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm adhishak/room 1 |
| 4 | Providing and fixing in position wall panneling at all hights with P.V.C. super weight pannal i/c supply of all the material , labour and T&p etc. all complete.room 1 |
| 5 | Brick work wthi common burnt clay F.P.S (non modular) bricks of class degignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in. (1:4) cement and C/ sand mortar i/c all as per DSR No-6.4.1Septik tankbaffle wallSoakpit |
| 6 | M.S. Iron work of small sizes and sections such as holding down bolts,hold fast ,tie rods ,gratings etc . Wrought to required from i/c supply of steel bolts ,nuts wastage etc and fixing required for proper completion of the work. D- vertical members horizontal members D1- vertical members horizontal members D D1 hold fast Window 35x35x5 hole phast V gril 0.90x.45=0.41 D ventiletor gril 0.90x0.45=0.41 |
| 7 | 12 mm thick cement Plaster of mix 1:6 , sand plaster in 1:6 (1cement & 6 C/sand mortar) as per DSR -13.4.2 Septic Tank Room/store outer Apron Same as flooring qty.Deduction Openings D W V |
| 8 | Providing and laying Ceremic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacture )of 1st quality conforming to IS : 15622 of approved make in colour such as white lovery , grey, fuma red brown , laid on 20 mm thick cement morter 1:4 (1cement :4 c/sand),jointing with grey cement slurry @ 3.3 kg/sqm i/c pointing the joints with white cement and matching pigment etc .complete .As per DSR-11.37.A STORE TOILET TOILET |
| 9 | Dado/ Skirting Room/store Gallery D D1 |
| 10 | Cement Concrete flooring in 1:2:4 (1 cement: 2C/sand :4 greded stone aggregate 12.20 mm gauge stone grit size laid one layer neat cement (25 mm thick floor). Floring Ragistration Room Dr. Room |
| 11 | Providing and applying white cement based putty ofaverage thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface toprepare the surface even and smooth complete. Same as plaster qty Room/store Gallery TOILET Outer AREA Deduction Less septic tank/soakpit Area |
| 12 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and includin priming Same as plaster qty Room/store Gallery TOILET Outer AREA Deduction Less septic tank/soakpit Area |
| 13 | Providing and fixing ISI marked flush door shuttersconforming to IS :2202 (Part I) non-decorative type,core of block board construction with frame of 1stclass hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands andface veneers on both faces of shuttersa) 35 mm Thick Single leaf |
| 14 | b) 35 mm Thick Double leaf |
| 15 | Providing and fixing fly proof galvanized M.S. wiregauge to windows and clerestory windows usingwire gauge with average width of aperture 1.4 mmin both directions with wire of dia 0.63 mm allcomplete.With 2nd class teak wood beading 62X19WW |
| 16 | Providing & fixing glass panes with putty and glazingclips in steel doors, windows, clerestory windows,all complete with : 4.0 mm thick glass panesWW |
| 17 | Painting two coats on steel or other metal surface over one coat of priming coat incl. material,labour and T&P etc. required for proper completion of work, as per DSR 13.48.3DWV |
| 18 | Electrical workWiring point for light point/fan point/ exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated single core copper conductor cable in Surface /recessed medium class PVC condute with 1.5 sq mm FR PVC Complet etc as required DSR-2022 1.10.3 |
| 19 | Supply and fixing of following sizes of medium class pvc conduit along with accessories in surface /recess i/c cutting the wall and making good the same in case of conduit as required AS per DSR - 2022 SI:1.21 20 mm pipe |
| 20 | Supply and fixing metel box of 150mm x 75 mm x 60 mm deep (nominal size )on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 3 pin 5/6 A socket outlet and 5/6 Apiano type swich, connections painting, etc .As required As per DSR - 2022 1.29 |
| 21 | S/F of following moduler swich /socket on the exiting moduler plate & swich box i/c connection but excluding moduler plate etc as required AS per DSR 2022 5/6 A swich |
| 22 | 3pin 5/6 A socket outlet |
| 23 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class ofinsulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shacklekit, safety rope, copper winding, Power Factor not less than 0.9, ServiceValue (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM(tolerance as per IS : 374-2019), THD less than 10%, remote or electronicregulator unit for speed control and all remaining accessories includingsafety pin, nut bolts, washers, temperature rise=75 degree C (max.),insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz,single phase AC Supply, earthing etc. complete as required. Ceiling fan |
| 24 | Supply of LED Tube Light with Metal heavy duty Box type batten Lightfitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in All respect |
| 25 | Supply of 36 Watt to 46 Watt indoor Recess mounting LED Square Fittingfor Armstrong Ceiling having Powder coated die cast aluminium housingbody with extended heat sink and diffuser of Special Polycarbonatemeterial and driver set complete in all respect. |
| 26 | Plumbing workP/F of 110 mm dia wall face unplasticised rigid PVC rain water down pipe Conferming to IS: 13592 Type A i/c jointing With Seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expention . (i) Single socketed pipes. As Per DSR NO-12.41.2 110 mm pipe |
| 27 | Providing and fixing watercloset squatting pan (indian type pan ) with 100 mm send cast iron P or S trap , 10 ltr low lvl white pvc flushing cistern , i/c flush pipe ,with manually controller device (handle lever) conferming to IS:7231, With all fitting and fixtures complete ,i/c cutting and making good the walls and floors wherever required: White viterious china orrissa patturn W.C. pan of size 580X440 MM with integral type foot rest |
| 28 | Providing and fixing White vitreous china flat back half stall urinal of size 580x380x350 mm white pvc automatic flushing cistern , with fitting standerd size c.p. brass flush pipe ,spreaders with with union and clamps (all in c.p. brass ) with waste fitting as per IS : 2556, CI : trap with outlet grating and other coupling in C P brass i/c painting of fitting and cutting and making good the wall and floors wherever required : |
| 29 | Providing and fixing wash besin with C.I. brackets , 15mm C.P. brass PILLER TAPS 32MM C.P. brass waste of standerd pattern , i/c painting of fitting and brackets, cutting and making good the wall wherever requir : |
| 30 | Providing And fixing flexible P.V.C. waste pipe for sink or wash besin i/c PVC waste fitting Complete .Flexible pipe A) 32 MM DIA |
| 31 | Providing and fixing cpvc pipes Having tharmal stability for hot & cold water supply and all cpvc plain &brass thereded fittings , i/c fixing the pipe with clamps at 1 mm specing . this i/c jointing of pipes &fitting with one step cpvc solvent cement testing of joints complete with cpvc fitting &clamps i/c cutting & making good the walls.Enternal work Exposed on wall15 mm dia nominal bore (medium duty) |
| 32 | 20 mm dia nominal bore (medium duty) |
| 33 | 25 mm dia nominal bore (medium duty) |
| 34 | 40 mm dia nominal outer pipes (medium duty) |
| 35 | Providing And Fixing C.P. brass long body bib cock of approved quality conforming to I S Standerd and weighing not less than 690 gms |
| 36 | Providing and fixing of gun metel gate valve with wheel of aproved quality . 25 mm nominal bore |
| 37 | 32 mm nominal bore |
| 38 | Providing And Fixing C.P. brass short body bib cock of approved quality conforming to I S : 8931 |
| 39 | Providing and placing on terrace (at all floor lvl ) polythelene water storage tank or approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank CIRCULAR TANK |
| 40 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. as per SI No. 251 |
| 41 | Providing and Laying ,spreading and compacting stone aggregates of specific sizes to water bound macadum specification i/c spreading in uniform thickness , hand packing ,rolling with three wheel 80-100 kn static roller in stages to proper grade and camber , applying and brooming , crushable screening to fill -up the interstitics of coarse aggregate , watering and compacting to the required desity Greding 3 as per technical specification |
| 42 | Brick masonary work in cement & coarse sand mortar 1:4 in foundation complete excluding pointing and plastering as per drawing and technical speficiations 305(B) |
| 43 | 12 mm thick plaster with Cement and Coarse Sand morter in 1:3 including supply of all material labour and T&P etc. required for proper complition of work. SI NO.-583 |
| 44 | 2.5 cm (1\") plain cement concrete floor with cement approved coarse sand 2 cm graded aproved stone laid in panels finished with 2 mm flooring coat without base concrete including supply of all materials, labour and tools and plants etc. required for proper completion of the work |
| 45 | Laying of 80 mm thick pre moulded inter locking paver tiles over prepared surface including all labour T&P etc. required for proper completion of work. |
| 46 | Supply and fixing of information sign board including letter writing and painting etc for compelition of work Please Enable Macros to View BoQ information |
