|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including getting out and disposal of excavated earth including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 2 | All kinds of soil. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including getting out and disposal of excavated earth including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 4 | Ordinary rock |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 7 | 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothincluding carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 11 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size). |
| 12 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 13 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 19 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 20 | All works upto plinth level |
| 21 | All works above plinth level upto floor V level |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 23 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 25 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 26 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 27 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 28 | Light shade pigment using white cement |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 30 | Size of Tile 600x600 mm |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 32 | 12 mm cement plaster of mix including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 33 | 1:4 (1 cement: 4 fine sand) |
| 34 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 35 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 36 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 37 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 38 | Two or more coats on new work |
| 39 | 15 mm cement plaster on the rough side of single or half brick wall of mix including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 40 | 1:4 (1 cement: 4 fine sand) |
| 41 | Providing and fixing Kullu Local stone Gadsa for cladding on External Surface8mm to 15mm thickin cement plaster 1:3(1cement:3 sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 42 | Providing and fixing factory made uPVC door frame with wooden colour texture made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 43 | Extruded section profile size 48x40 mm |
| 44 | Providing and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter wooden colour texture made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 45 | The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 46 | Providing and fixing factory made uPVC wooden colour texture casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 47 | Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). |
| 48 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 49 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 50 | Two track four panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). |
| 51 | Providing and fixing glazing in aluminium/UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 52 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 53 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 54 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 55 | 300x10 mm |
| 56 | 250x10 mm |
| 57 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 58 | 125 mm |
| 59 | 100 mm |
| 60 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 61 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 62 | Single rubber stopper |
| 63 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 64 | 300x16 mm |
| 65 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 66 | Providing and fixing Godrej premium cylindrical lock with 3 keys for PVC doors, suitable for left & right-handed doors with inside/outside opening, brass finish, including necessary screws, fittings, and metal adapter/mounting plate for hollow PVC door complete,including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 67 | Providing and fixing Galvanised iron ceiling frame work support system including main runners, cross channels, hangers, brackets, fasteners, bolts, nuts, washers, hold-fasts, rawl plugs, necessary carriage, cutting, drilling, alignment and all other accessories complete as per approved drawings, manufacturer’s specifications including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 68 | Providing and fixing PVC false ceiling in approved wooden shade colour , by directly fixing PVC ceiling panels to existing ceiling/substrate/GI framework (already paid separately), including all materials, approved fixings, edge trims, neat joints, cut-outs for light fittings, fans, AC grills, accessories, labour, tools, scaffolding and incidental works complete as per approved drawings, manufacturer’s specifications including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 69 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 70 | Providing and fixing polycarbonatd tranparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 71 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 72 | Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick pre‑printed steel sheets in roofing with hot dipped metallic zinc coated sheets having top coat of modified polyester organic coating of 20 microns over 5 microns primer + back coat of polyester of 5 microns over 5 microns primer, including fixing with pre‑printed iron J or L hooks, 6 mm dia bolts & nuts, pre‑printed G.I. limpet & bitumen washers and all accessories complete, including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 73 | Providing and fixing valley 60 cm overall 0.60mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic outing of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 74 | Providing and fixing M.S. B.P. sheet 1.66 mm to 2.00 mm thick on eaves board / fascia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying one coat of red‑lead primer complete, as per the instructions including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Base steel work members shall be measured and paid for separately.) |
| 75 | Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.I. sheet gutter with iron brackets 40×3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipe complete as per design including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 76 | Applying priming coat including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 77 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 78 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 79 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 80 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 82 | 15 mm nominal outer dia Pipes |
| 83 | 20 mm nominal outer dia Pipes |
| 84 | 25 mm nominal outer dia Pipes |
| 85 | Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 86 | 75 mm diameter |
| 87 | 110 mm diameter |
| 88 | Providing and fixing One-piece European Water Closet (EWC) made of white vitreous china, complete with in-built flushing cistern, duroplast slim soft-close seat cover, siphonic jet flushing system, of overall size 650 × 345 × 720 mm, Catalogue No. S1013247 (Clayton Pro or equivalent approved make), including all floor fixing bolts, connectors, sealing compound, accessories, concealed S-trap, testing, commissioning and making the unit fully functional, including cutting and making good the walls and floors wherever required, complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 89 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 90 | 15mm nominal bore |
| 91 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of material up to all leads and lifts and as per direction of Engineer incharge. 30 cm length |
| 92 | 15 mm nominal bore |
| 93 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 94 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 95 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 96 | Flexible Pipe 32mm dia. |
| 97 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 98 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 99 | 15 mm nominal bore |
| 100 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or equivalent ) |
| 101 | Group A |
| 102 | Group C |
| 103 | Wiring for twin control light point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HR-FRLS-H-LF PVC insulated copper conductor single core cable etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent ) |
| 104 | Group C |
| 105 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm HRFRLS-LR PVC insulated copper conductor single core cable etc as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Polycab/Havells/Finolex for wires make or equivalent ) |
| 106 | Group A |
| 107 | Group C |
| 108 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Legrand,Havells,Bajaj make or equivalent) |
| 109 | S.P. 5/ 6 Amps one way Modular switch. |
| 110 | 3 pin, 5/ 6 Amps Modular socket outlet. |
| 111 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 112 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 113 | Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 114 | 1 x 1.5 sq. mm |
| 115 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or equivalent ) |
| 116 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 117 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 118 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 119 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 120 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 121 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Legrand,havells make or equivalent) |
| 122 | Single pole |
| 123 | Double pole 32Amp |
| 124 | Triple pole and neutral 32Amp |
| 125 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Usha,Bajaj,Havells make or equivalent) |
| 126 | Exhaust Fan, Light duty, 200 mm sweep |
| 127 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge.(Legrand/Schneider/L&T make or equivalent) |
| 128 | 25 A RCCB |
| 129 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 130 | 20 mm dia. ISI marked, PVC conduit |
| 131 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent ) |
| 132 | Double door-4 way |
| 133 | Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 134 | G.I. earth plate 600 mm X 600 mm X 6 mm thick |
| 135 | Copper earth plate 600 mm X 600 mm X 3 mm thick |
| 136 | Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required including carriage of material up to all leads and lifts and as per direction of Engineer incharge. Please Enable Macros to View BoQ information |
