Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR No. 2.6.1 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR No. 2.27 |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR No.2.35.3.1 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR No. 4.1.8 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : DSR NO. 5.9Foundations, footings, bases of columns, etc. for mass concrete : Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.9.1 |
| 6 | Suspended floors, roofs, landings, balconies and access platform Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.9.3 |
| 7 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.9.5 |
| 8 | Columns, Pillars, Piers, Abutments, Posts and Struts. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.9.6 |
| 9 | Edges of slabs and breaks in floors and walls Under 20 cm wide. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.9.16.1 |
| 10 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.11.1 |
| 11 | Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.22.6 |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mixor bear the cost of extra cement. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.33.1.1 |
| 13 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum. DSR NO. 5.33.2.1 |
| 14 | Add for using extra cement in the items of design mix over and above the specified cement content therein. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.35 |
| 15 | Brick Work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in foundation and plint in : Cement mortar 1:6 (1 cement : 6 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 6.1.2 |
| 16 | Brick Work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 6.4.1 |
| 17 | Half Brick masonary with common burnt clay F.P.S (non modular) brick of class designation 7.5 in super structure above plinth level up to floor V level Cement mortar 1:4 (1 cement : 4 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 6.13.2 |
| 18 | Providing and fixing M.S. Tubular frames for doors, windows, ventilatorsand cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO . 10.15.1 |
| 19 | 9.21.1 - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:9.127.2 - Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.21.1+9.12.7.2+2 |
| 20 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 10.31 |
| 21 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws andbright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 90129 |
| 22 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.121 |
| 23 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.122.1 |
| 24 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.23 |
| 25 | Providing and fixing factory made uPVC white colour sliding lazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.147A4.1 |
| 26 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.0 mm thick glass panes (weights not less than 12.50 kg/ sqm). DSR NO.10.30.2 |
| 27 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.135.2 |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.48.1 |
| 29 | Providing and fixing bright /matt finished Stainless Steel sliding door bolt of approved quality & make with necessary screws etc all complete. 250x16 mm. As per MR |
| 30 | Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. 250x10 mm. As oer MR |
| 31 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 9.165.1 |
| 32 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 50 mm thick. DSR NO. 5.18.1 |
| 33 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 11.39 |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 8.31 |
| 35 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 11.41A Double charge vitrified tile polished finish of size of Tile 600 x 600 mm. DSR NO. 11.41A+1.1 |
| 36 | Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DS NO. 11.41A+3.1 |
| 37 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 11.26.1 |
| 38 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 11.27 |
| 39 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 11.56.1 |
| 40 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 8.2.2.2 |
| 41 | 12 mm cement plaster : 1:4 (1 cement : 4 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.4.1 |
| 42 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement : 4 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.5.1 |
| 43 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) In Ceiling. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 13.16.1 |
| 44 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement : 4 coarse sand) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.5 |
| 45 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.41.1 |
| 46 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.47.1 |
| 47 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.48.3 |
| 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 13.80 |
| 49 | Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023DSR NO. 5.30 |
| 50 | Add for plaster drip course in plastered surface or moulding to R.C.C. projections. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 5.30 |
| 51 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: A-Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. B-Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. C-After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.D-Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. E-The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 22.7.1 |
| 52 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 4.17 |
| 53 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 6.44 |
| 54 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 12.41.2 |
| 55 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler - 110mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 12.42.1 |
| 56 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° - 110mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 12.42.5.2 |
| 57 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 12.43.2 |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 17.1.1 |
| 59 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid . Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 17.2.1 |
| 60 | Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR. NO. 17.7.4 |
| 61 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Sink with drain board 510x1040 mm bowl depth 200 mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.10.1.3 |
| 62 | Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete. Flexible Pipe. 32mm Dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST.DSR NO. 17.28.2.1 |
| 63 | Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete. Flexible Pipe. 40mm Dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 DSR NO. 17.28.2.2 |
| 64 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.32.1 |
| 65 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.33 |
| 66 | Providing and fixing toilet paper holder :C.P. brass. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.31.1 |
| 67 | Providing and fixing soil, waste, vent pipes . PVC SWR PIPE. 110mm dia PVC SWR PIPE. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR |
| 68 | Providing and fixing MS holder bat clamps of approved design to PVC pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 110mm dia. Pipe. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR. |
| 69 | Providing and fixing heel rest sanitary bend, in PVC SWR PIPE. 110mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR. |
| 70 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.110X110X110mmPVC SWR PIPE. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR |
| 71 | Providing and fixing PLAIN JUNCTION of required degree 110X110X110mmPVC. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR. |
| 72 | Providing and fixing terminal guard:110mm. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. PVC. As per MR |
| 73 | Providing and fixing collar.110mmPVC SWR PIPE. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. AS PER MR |
| 74 | Providing PVC joint with Primer & Cement etc. complete. 110 Dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR. |
| 75 | Providing and fixing PVC SWR Trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 110 mm inlet and 110 mm outlet, PVC SWR PIPE &S as per IS: 3989 . Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. As per MR. |
| 76 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.71 |
| 77 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.72 |
| 78 | Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 17.73.2 |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall .15 mm dia nominal bore. DSR NO. 18.7.1 |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall .20 mm dia nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.7.2 |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall .25 mm dia nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.7.3 |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..Internal work - Exposed on wall .32 mm dia nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.7.4 |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.8.1 |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia pipes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.8.2 |
| 85 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)25mm dia, nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.17.1 |
| 86 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)32 mm dia, nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.17.2 |
| 87 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore . Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.21.2.1 |
| 88 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.22.1 |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.48 |
| 90 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:893115mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.49.1 |
| 91 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.51.1 |
| 92 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.15 mm nominal bore. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.53.1 |
| 93 | Providing and fixing PTMT grating of approved quality and colourCircular type100 mm nominal dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 18.58.1.1 |
| 94 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soilPipes, cables etc, not exceeding 80 mm dia. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 2.10.1.1 |
| 95 | Providing and fixing square-mouth S.W. gully trap grade \"A\"’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than100x100 mm size P typeWith F.P.S. Bricks class designation . Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 19.4.1.1. |
| 96 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia rcc pipe. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 19.6.2 |
| 97 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm dia rcc pipe Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 19.6.3 |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 gradeInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With F.P.S. bricks with class designation 150. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 19.7.1.1 |
| 99 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With F.P.S. bricks class designation 150. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR NO. 19.7.2.1 |
| 100 | Sub-Head : WIRINGWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.10.3 |
| 101 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X2.5 sq. mm + 1X2.5 sq. mm earth wire. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.14.2 |
| 102 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.14.3 |
| 103 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.14.4 |
| 104 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.14.9 |
| 105 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2X6 sq. mm earth wire Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.14.10 |
| 106 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.18.2 |
| 107 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.19 |
| 108 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.21.1 |
| 109 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.21.2 |
| 110 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.21.3 |
| 111 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. A switch Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.21.1 |
| 112 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.3 |
| 113 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.4 |
| 114 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 A socket outlet Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.5 |
| 115 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.6 |
| 116 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.7 |
| 117 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.24.8 |
| 118 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.26 |
| 119 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.27.1 |
| 120 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.27.2 |
| 121 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.27.4 |
| 122 | Supplying and fixing call bell/ buzzer suitable for single phase, V, complete as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.38 |
| 123 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Up to 450 mm sweep Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.50.1 |
| 124 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.1.51 |
| 125 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.53.1 |
| 126 | Supplying & fixing suitable size Gl box with modular plate and cover in fronton surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.57 |
| 127 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 1.58 |
| 128 | Sub-Head : MCCB, MCB & OB\"SProviding and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A.30KA.FPMCCB Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.2.2.13 |
| 129 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 4 way (4 + 12), Double door Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 2.4.1 |
| 130 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 6 way (4 + 18), Double door Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.2.4.2 |
| 131 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 2.5.1 |
| 132 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 2.10.1 |
| 133 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.2.11 |
| 134 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.2.13.1 |
| 135 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.2.15.3 |
| 136 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 2.21 |
| 137 | Sub-Head : EARTHINGEarthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 5.40 |
| 138 | Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 5.7 |
| 139 | Supplying and laying 25 mm X 5 mm G.l. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm) Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 5.9 |
| 140 | Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 5.15 |
| 141 | Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 5.16 |
| 142 | Sub-Head : MV CABLE JOINTING & END TERMINATIONSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3-1/2 X 35 sq.mm.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM9.1.21 Code No. 9.1 |
| 143 | Sub-Head : MISC. CIVIL ITEMSProviding and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.(DSR Civil Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 Item no. 10.18.)CIVIL DSR- Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. 2023 (14.15) |
| 144 | Sub-Head : Ceiling Fan with BLDC MotorSupply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 19.1 |
| 145 | Sub-Head : Schedule Items as per UPPWD (DOWNLIGHTER)Supply and fixing of IP 20,Mid power SMD type LED Light,2\"x2\" 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated CRCA housing body Hiigh purity/transmisivity UV Stabilized Non yellowish diffuser/reflector for uniform light distribution detachable drive set,open and short circuit protection suitable for 24 Hrs. continuous operation.complete in all respect. CAT. - AAA 4320-5520 system lumens,with fully covered diffuser type>120 lm/w, PF>.95, THD<10%, CRI>80, >300V over voltage protection,4KV internal Surge protection, with 5 years Warrantee.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 23.05 |
| 146 | Supply and fixing of LED Tube Light with heavy Duty Metal Box type Tube Light Fitting 1x22 watt suitable for upto 1x22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. CAT. - AAA 2620 system lumens,>120 lm/w PF>.95,THD<10%,CRI>80, sheet thickness min 0.8 mm, Tube with aluminum heat sink, >300V over voltage protection,2.5 KV internal Surge protection, with 5 years Warrantee. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 23.07 |
| 147 | FLOOD LIGHT LUMINAIRESupply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass UV stabilized PC Cover and lenses built with mandatory driver set suitable for 100 to 120 Watt Confirming to lP 66, IK 07 and above protection complete in all respect. 12000-14400 system lumens, High power LED with lenses,>120 lm/w, PF>.95,THD<10% at full load,CRI>70,Potted driver set in metal housing ( not circuitory), phase to phase protection at 440 v, >300V over voltage auto cut and restart feature , 4 KV internal Surge protection, with 5 years Warrantee.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 23.24 |
| 148 | CABLE WORKSSupplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top as directed by Engineer-Incharge ,complete in all respect including excavation and refilling.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. 20a.135 sq mm 3-1/2 core Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.11.0 |
| 149 | Sub-Head : Non-Schedule ItemsSupply of AC 300mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Heavy Duty) with blades,cover etc. complete as required.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. A.R.-1.5 |
| 150 | Supply of AC 200mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Light Duty) with blades,cover etc. complete as required Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No. A.R.-1.6 |
| 151 | Supply of Factory made 12 to 20 Watt LED Bulb fitting,cool day light,(65000 K temp.) suitable for Batton/Angle holder including making connection.Complete in all respect.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.A.R.-2.1 |
| 152 | Supply of LED Tube Light with batten suitable for up to 1 X 10 watt LED tube light fitting including tube on Surface complete in all respect.(2ft)(MIRROR LIGHT)CAT- AAAIncluding cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.A.R.-2.2 |
| 153 | Supply & Fixing of LAN socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Including cost of, all material, labour, T&P, Labour cess, all taxes complete. But excluding GST. DSR-22EM Code No.A.R.-3 Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
