|
| 1 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery each complete all as specified and directed. |
| 2 | S & F in repair 18mm thick PVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. |
| 3 | S & F in repair 18mm thick PVC boardof grade 1 quality ofone side prelaminated type fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. |
| 4 | S & F in repair 12mm thick PVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. |
| 5 | S & F continuous (Piono) hinges ,stainless steel bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 6 | S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 7 | S&F stainless steel handles of 100 mm size for Cup board complete all as specified. |
| 8 | S&F stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) complete all as specified and directed. |
| 9 | M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/Wiremesh, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Chief. |
| 10 | M&L for 3mm thick figured or pin headglass ordinary quality and glazing with oil putty/beadings for aluminium frame in square n exc 0.5 sqm in each pane complete all as directed byEngineer-in-Charge |
| 11 | S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed in aluminium ventilator frame with all necessary fittings completed all as specified and directed. |
| 12 | M&L for 15mm thick renderingin cement mortar (1:4)on brick work or concrete surfaces, finished even and smooth without using extra cement including taking down complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash,complete,all as specified and directed by Enginner - in -Charge |
| 14 | M&L Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil all as specified and as directed |
| 15 | M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 16 | M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) sub base as in floors and pavings of 100 thick all as specified and as directed |
| 17 | Supply and laying fine aggregate (sand) 25mm thick spreading and levelling in layers n exc 25cm thick incl consolidation complete all as specified and directed. |
| 18 | M&L Machine presses precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment |
| 19 | M&L Cement concrete (1:2:4) type B1 using 12.5mm graded stone aggregate as in coping and bed block including necessary form work and finishing surfaces fair and even with using extra cement complete all as specified and directed |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) complete all as specified and directed. |
| 21 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius builtin cement mortar 1:6 etc,complete all as specified and as directed. |
| 22 | M&L Sand filling under floors or in foundations including watering and consolidationspreading and levelling in layers n exc 25cm thick incl consolidation complete all as specified and directed |
| 23 | M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) 25 mm thick finished ever and rought to receive the top layer complete all as specified and as directed |
| 24 | M&L for non skid ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 25 | M&L for coloured glazed ceramic tilesin vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 26 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface in soft/loose soil complete all as specified and directed. |
| 27 | M&L Cement concrete type B1 1:2:4 (20mm graded aggregate ) as in foundation for Posts and Struts all as specified and as directed |
| 28 | S&F Steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 29 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 30 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 31 | M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed |
| 32 | Removing excavated materials to a distance exc 250m and not exc 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
