|
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc. complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness below or above the ground level complete all as specified and as directed. |
| 3 | Dismantling asbestos cement (corrugated or semicorrugated, etc) sheets in roof covering including L type or J type hooks or cranked bolts etc complete all as specified and as directed. |
| 4 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 Sq.cm in section complete all as specified and as directed. |
| 5 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, including necessary scaffolding etc. complete all as specified and as directed. |
| 7 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 8 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and as directed. |
| 9 | Brick work using sub class ‘B’ bricks old size, straight or curved on plan exceeding6 M mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 10 | PCC 75 mm thick (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate), plinth protection etc. complete all as specified and as directed. |
| 11 | 25 mm thick cement concrete (1:2:4) typeB-0 (using 12.5mm graded crushed stone aggregate) as in floor complete all as specified and as directed. |
| 12 | PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in bed block and coping, post hole and benching embedding of hold fast etc complete all as specified and as directed. |
| 13 | Rolled section as in main and cross beams hip and angle, jack rafters, purlins where connected to common rafters and running rails and guides for Vertical Column, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe 290 grade E-165 complete all as specified and as directed. |
| 14 | Framed work such as guard bars, grills, hold fast etc and similar work including welding/ rivetting confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 15 | Framed work as in doors and gates of angle or other section including welding/ rivetting, stringers, braces etc complete drilled for fixing of steel sheeting or other coverings to doors etc conforming FE-410-W complete all as specified and as directed. |
| 16 | Pre-painted galvalume aluminium zinc coating 275gm/sqm GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with suitable washer complete all as specified and as directed. |
| 17 | Pre-painted galvalume aluminium zinc coating 275gm/sqm GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with suitable washer complete all as specified and as directed. |
| 18 | Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 19 | 15mm thick rendering in cement mortar (1:6) on concrete, brick/ stone surfaces of wall finished even and smooth including necessary scaffolding complete all as specified and as directed. |
| 20 | Rendering 15 mm thick on concrete/ brick/ stone surface wall in cement mortar (1:4), finished fair and even, including necessary scaffolding complete all as specified and as directed. |
| 21 | Applying two coats of oil emulsion distemper over a coat of wall care putty of 1 mm thick on new plaster surface complete all as specified and as directed. |
| 22 | Applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty on old decorated surface including complete removal of existing treatment all as specified and as directed. |
| 23 | Applying three coats of white/ colour washing on new plaster surfaces including preparation, necessary scaffolding complete all as specified and as directed. |
| 24 | Applying two coats of cement based paint on new plaster surfaces including preparation, necessary scaffolding complete all as specified and as directed. |
| 25 | Applying two coats of cement based paint on old decorated surfaces including preparation and necessary scaffolding complete removal of existing treatment complete all as specified and as directed. |
| 26 | Applying two coats of white/ colour washing on old decorated surfaces including preparation and complete removal of existing treatment complete all as specified and as directed. |
| 27 | Preparation, washing, rubbing down of old decorated plastered or un-plastered surface of wall and applying one coat of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer\"s instructions complete all as specified and as directed. |
| 28 | Applying one coat of synthetic enamel paint on old steel surface over one coat of red oxide primer and complete removal of existing treatment complete all as specified and as directed. |
| 29 | Preparation and applying one coat of synthetic enamel paint on old wooden surface over one coat of pink primer and complete removal of existing treatment complete all as specified and as directed. |
| 30 | Applying two coats of synthetic enamel paint on new steel surface over one coat of red oxide primer complete all as specified and as directed. |
| 31 | Preparation and applying two coats of synthetic enamel paint on new wooden surface over one coat of pink primercomplete all as specified and as directed. |
| 32 | Machine cut kota stone 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over 20mm thick screed bed in cement mortar (1:4) as in floor complete all as specified and as directed. |
| 33 | Machine cut and polished smooth surface of kota stone slab 18-20mm thick as in skirting, including 15 mm thick cement mortar and screed bed (1:4) fixed in position etc complete all as specified and as directed. |
| 34 | Coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed. |
| 35 | Coloured Glazed ceramic tiles in vertical surface as skirtings 350 x 250 x 7 mm/ 450 X 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bed or bedding layer of mortar in cement mortar (1:4) as in vertical surface etc complete all as specified and as directed. |
| 36 | Pre-painted (factory painted) box type mild steel windows/ Ventilator (factory made) outer frame made out ERW tube \"P\" section 65 x 45 x 25 mm and shutter of ERW tube \"P\" section 50mm x 35mm x 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including necessary GI wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of \"Z\" section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler/ AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 and all as directed.Notes: - The quoted rates shall also include:-(i) Two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge.(ii) 4 nos MS steel lugs made of 20 x 5 mm Iron flat 200 mm long.(iii) 10 mm Sq Bar grill/ guard bar design as per drawing.(iv) PCC block for embedding lugs complete (v) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete.(vi) 3mm thick ordinary glass sheet quality and glazing with oil putty including glazing pins or spring clips. |
| 37 | 4mm thick of size 605 x 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 and GI section frame work (POWDER COATED) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross \"Tee\" 28.6mm (web) X 24mm flange. 33mm thick powdered coated main tee 38 (Web) X 24mm flange 0.33mm thick. Wall angle screwed fixed to brick wall/ partition wall/ concrete/ RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main \"Tee\" in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions. Suitable provisions shall be made for fixing the recessed/ surface mounting light fittings if any complete all as specified and as directed by Engineer-in-Charge. |
| 38 | 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and as directed. |
| 39 | 35 mm thick second class hard wood glazed and skeleton shutters including door spring/ stopper, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed. |
| 40 | Butt hinges, medium weight, cold rolled mild steel and fixed (Size of hinges 125 mm) complete all as specified and as directed. |
| 41 | 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc. complete all as specified and as directed. |
| 42 | 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 43 | 150 mm Aluminium anodised door handle including welding/ rivetting etc complete all as specified and as directed. |
| 44 | Mild steel 300 mm, ordinary rat tail rod pattern springs (helical door spring) including roller and roller plate complete all as specified and as directed. |
