Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Disconnecting of existing water tanks exc. 250 Ltrs but not exc 500 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc |
| 2 | Dismantling ofBricks (laid flat or on edge) or brick tiles/cemented tiles in floors,roof,terrace, channels,kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as specifred and as directed. |
| 3 | Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster/demolition of cement concrete any thickness and removal of debris off the premisesincluding grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust. |
| 4 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)complete all as specifred and as directed. |
| 5 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof including mixing of water proofing compound as per manuacture instructionfinished and laid to required slope complete all as specified and as directed.(WPC shall be measured and paid separately) |
| 6 | M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of rooffinished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately) |
| 7 | M&LAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application incl Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified anddirected . |
| 8 | S&FRotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified |
| 9 | Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store ,complete all asspecified and directed byby Engr-in-charge. |
| 10 | Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed |
| 11 | S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors ,complele all asspecified and directed byby Engr-in-charge. |
| 12 | S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors,complete all asspecified and directed byby Engr-in-charge. |
| 13 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed. |
| 14 | M&L for Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all asspecified and directed byby Engr-in-charge. |
| 15 | M&L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall built in cement mortar 1:6 ,complete all asspecified and directed byby Engr-in-charge. |
| 16 | M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,complete all asspecified and directed byby Engr-in-charge. |
| 17 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces rendering to be finishedeven and smooth without using extra cement ,complete all asspecified and directed byby Engr-in-charge. |
| 18 | M&L for preparation of newly plastered surfaces ofwalls and applying two coats of oil bound distemper over a coat of primer including applying base ofputty for smoothening of surfaces etc ,complete all asspecified and directed byby Engr-in-charge. |
| 19 | M&L for Complete removal of existing treatment of oldplastered surfaces ofwalls and applying two coats of oil bound distemper over a coat of primer including applying base ofputty for smoothening of surfaces etc,complete all asspecified and directed byby Engr-in-charge. |
| 20 | M&L for Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) including water proofing compound mixed in 2nd layer (supply of WPC will bepaid seprately) complete all as specified and as directed by Engineer-in-charge. |
| 21 | supply only Liquid water proofing ,complete all asspecified and directed byby Engr-in-charge. |
| 22 | M&L for Applying two coats of cement base paint including prepration of new plastered surfaces of wallcomplete all ,complete all asspecified and directed byby Engr-in-charge. |
| 23 | M&L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding ,complete all asspecified and directed byby Engr-in-charge. |
| 24 | M&L forRendering 5 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed by Engineer-in-charge. |
| 25 | Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washingcomplete all as specified and as directed by Engineer-in-charge. |
| 26 | Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed. |
| 27 | Dismantlingfloor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all asspecified and directed byby Engr-in-charge. |
| 28 | M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed. |
| 29 | M&L forGlazed coloured ceramic tiles joint freein vertical surfaces of size 300 x 450 mm x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm thick rendering in CM 1:3on brick /concrete surfaces ,complete all asspecified and directed byby Engr-in-charge. |
| 30 | M&L for non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, ,complete all asspecified and directed byby Engr-in-charge. |
| 31 | Description all as item No 31 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete. |
| 32 | M& L for green Marble work 18 to 20mm thick (table rubbedand polished)insteps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marbles complete all as specified & directed by Engr-in-charge. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), all as specified and directed by Engineer-in-charge. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt). |
| 35 | Material & labourfactory made steel windows double shutter box type, outer frame made out of ERW TUBE \"P\" section (60x45x25mm) and shutters of ERW TUBE \"P\" section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of \"Z\" sectionwith 10mm squar guardbarsdevetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3all as specified and directed by Engr-in-Charge. |
| 36 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 37 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,complete all asspecified and directed byby Engr-in-charge. |
| 38 | M&L for preparation of new or previouslyuntreatedsurface of steelor ironsurfaces of any descriptionover 10cm width or grithand applyingtwo coatsof synthetic enamel paintover a coat of red oxideprimer ,complete all asspecified and directed byby Engr-in-charge. |
| 39 | M&L for preparation of old painted steelor ironsurfaces of any descriptionover 10cm width or grithand applyingone coatsof synthetic enamel paintall as specified. |
| 40 | S&F Factory made 35mm thick, IInd class H.W rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all asspecified and directed byby Engr-in-charge. |
| 41 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all asspecified and directed byby Engr-in-charge. |
| 42 | S&F 35 mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters ,complete all asspecified and directed byby Engr-in-charge. |
| 43 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all asspecified and as directed by Engr-in-Charge. |
| 44 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplyingand fixing in the frame at site as per specification & drawing complete all asspecified and as directed by Engr-in-Charge |
| 45 | S&F butt hinges of mild steel cold rolled medium weight of size 100mm ,complete all asspecified and directed byby Engr-in-charge. |
| 46 | S&F in repair mild steelhelical ordinaryrat tail rod patternsprings300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work ,complete all asspecified and directed byby Engr-in-charge. |
| 47 | Pressed steel cup board frameof MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats includingbutt hinges 100 mm long. Piano hinges measured separately. |
| 48 | M&L for Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all asspecified and as directed by Engr-in-Charge. |
| 49 | S&F for Harrison rails, mild steel,anodised aluminium alloy with fixing brackets, stops,rollers etc. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),complete all asspecified and directed byby Engr-in-charge. |
| 50 | M&L for preparation ofoldwooden surfaces of any description over 10 cm width or girth and applying onecoat of synthetic enamel paint ,complete all asspecified and directed byby Engr-in-charge. |
| 51 | S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all asspecified and directed byby Engr-in-charge. |
| 52 | S&F Sheet glass, ordinary quality 2.5 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane ,complete all asspecified and directed byby Engr-in-charge. |
| 53 | All as per item no52 abovebut fixing as in repair incl hacking out old glassess from metal frame ,complete all asspecified and directed byby Engr-in-charge. |
| 54 | S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all asspecified and directed byby Engr-in-charge. |
| 55 | S&F Aluminium handle 150 mm long cast type anodised, ,complete all asspecified and directed byby Engr-in-charge. |
| 56 | S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section ,complete all asspecified and directed byby Engr-in-charge. |
| 57 | Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing ,complete all asspecified and directed byby Engr-in-charge. |
| 58 | S&F in RepairVitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting stands incl 32mm diawaste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 59 | S&F in repair C.P. Bib taps(Fancy type) 15mm bore cast copper alloy with crutch or butter fly handle,screwed down,screwed for iron pipe or brass ferrule ,complete all asspecified and directed byby Engr-in-charge. |
| 60 | S&F in repair C.P. Angle valve/stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions ,complete all asspecified and directed byby Engr-in-charge. |
| 61 | S&F in repair C.P. pillar tap( fancy type 15mm bore)cast copper alloy with capsten head screwed down high pressure with or without letter \"Hot\" or \"Cold\" with long screw shank and flt nuts screwed for iron pipe ,complete all asspecified and directed byby Engr-in-charge. |
| 62 | S&F in repair Bevelled edge looking mirror 600x450mm selected quality glass mounted on 6mm thick AC building board or commercial ply with PVC frame ,complete all asspecified and directed byby Engr-in-charge. |
| 63 | S&F in repairs tubular towel rail,brass chromium plated, 60cm long between flanges complete all as specified and directed |
| 64 | S&F in repair PVC connection 15mm size, 450mm long with PTMT nut ,complete all asspecified and directed byby Engr-in-charge. |
| 65 | S&Fin repair10 litres CapacityPVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs ofHigh or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any ,complete all asspecified and directed byby Engr-in-charge. |
| 66 | S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc.,complete all asspecified and directed byby Engr-in-charge. |
| 67 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantileverbrackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm ,complete all asspecified and directed byby Engr-in-charge. |
| 68 | M& L cement concrete as in sunken floor ,mass concrete type C-2 1:3:6 40 mgraded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified and directed byby Engr-in-charge. |
| 69 | M&L cement concrete type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course including demolition of existing PCC of any description complete all as specified and directed byby Engr-in-charge. |
| 70 | M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 71 | M&L Providing, cement concrete1:2:4 Type B-1(using (20 mm graded ggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ,complete all asspecified and directed byby Engr-in-charge. |
| 72 | S&F in repairBrasschromiumplatedshower rosewith or without swivel joints, 125mm size, including fixing to steel pipe or union,complete all asspecified and directed byby Engr-in-charge. |
| 73 | S&Fin repair 15mm bore stop valve fancy type chromium plated withlong shank and cup (concealed type)screwed down, high pressurewith crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,,complete all asspecified and directed byby Engr-in-charge. |
| 74 | S&F UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge. |
| 75 | S&F UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. |
| 76 | S&F UPVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge. |
| 77 | S&F UPVC(SWR)type B pipes 75 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. |
| 78 | S&F, UPVC (SWR) , bends for75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 79 | S&F, UPVC (SWR) , bends with access doorfor75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 80 | S&F, UPVC(SWR) , bendsfor110 mm borecomplete all as specified and as directed by Engineer-in-charge. |
| 81 | S&F, UPVC(SWR) , bends with access door, for110 mm borecomplete all as specified and as directed by Engineer-in-charge. |
| 82 | S&F, UPVC(SWR), junction single,(single \"T\") with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 83 | S&F UPVC (SWR) , reducers 110 mm dia complete all as specified. |
| 84 | S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified. |
| 85 | S&F in repair UPVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 86 | S&F in repair,UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. |
| 87 | M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,Including Demolition ofreinforced cement concrete of any discription ground to 2nd floors and removingthe rubbish from the work site out side defence premises complete all as specified. |
| 88 | M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips, ,complete all asspecified and directed byby Engr-in-charge. |
| 89 | M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete,complete all asspecified and directed byby Engr-in-charge. |
| 90 | M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workn exc. 10cm wide for fair finished surfaces of concrete,,complete all asspecified and directed byby Engr-in-charge. |
| 91 | Machine cutkota stone slab flooring 20-25mm thick including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishesand jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing completecomplete all as specified & directed |
| 92 | Kota stone slab 20-25mm thickin riser of steps, skirting, dadoand pillar laid over cement screed and jointed with ditto as per item No.86 ,complete all asspecified and directed byby Engr-in-charge. |
| 93 | M&L for 50 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), ,complete all asspecified and directed byby Engr-in-charge. |
| 94 | M&L for PCC 1:3:6 type C-2(using 40 mm graded cr. stone aggr)as in surface channels and drains includingDemolition ofcement concrete of any descriptions any position specifically provided for complete all as specified . completee all as specified.complete all as specified.complete all as specified and as directed. |
| 95 | Chequered Coloured cement concrete tiles 30cm x30cm x25mm thick, , set, with grey cement and pigment , jointed and pointed in neat cement slurry in floors over and incl 15 mm thick screed bed in CM 1:4, including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc.completeall as spd & dir. |
| 96 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete as per architectural drawings and thedirections of Engineer-in-Charge. |
| 97 | S&F for 5.5mm thick selected quality tinted sheet glass,glazing,fixed with PVC/Neoprene gasket etc in aluminium partition/doors/windows/ventilators/sliding shutters etc with any type of cutting circle and semicircle for acces,complete all as specified and directed. |
| 98 | S&F ACP Sheet 3.0mm thick in aluninum section and cleat rubber packing aluminium beading including aluminium hardware fitting in aluminium partition / doors/windows/sliding shutters etc complete all as specified and directed |
| 99 | S&F Anodised aluminium door shutters, powder coated any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised hydraulic door closer,anodised aluminum snap beading screws etc. complete all as specified |
| 100 | Brick work with subclass \"B\" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge |
| 101 | Brick work with subclass \"B\" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6but except bricks complete all as specified and as directed by Engineer-in-charge |
| 102 | Dismantling water tanks and removing to store of water storage tanks (Cap. From 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge. |
| 103 | Supply and fixingRotational moulded polyethylene water storage tanks of1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. |
| 104 | Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed. |
| 105 | M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls. |
| 106 | Material and labourNon - skid DigitalCeramicjoint lesscoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in CM 1:4. |
| 107 | Material and labour glazed ceramic colouredDigital tiles in vertical surface300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.(Sample approved by GE\"s) |
| 108 | Material and labour Ceramic coloured tiles10 mm thick (square/ rectangular) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to matchover and including15 mm thick screed bed in CM 1:4. |
| 109 | Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar |
| 110 | M&L 16 to 18mm thick green udaipur marble in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge. |
| 111 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 112 | Supply and fixingin repair Galvanised mildsteelwire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specifiedfixed with stainless steel wire staples. |
| 113 | S&F Aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixed complete all as specified. (ISI Marked) |
| 114 | S&F Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified. (ISI Marked) |
| 115 | S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 116 | S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 117 | S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified. |
| 118 | Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed |
| 119 | S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finialsfor 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) |
| 120 | S&F in repairSink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. |
| 121 | S&F in repair 15 mm bore Bib Cock with wall flange cast copper alloy, chromium plated fancy type ,complete all as specified. |
| 122 | S&F in repair 2 way Angle valve with wall flange, chromium plated fancy type, sutable for 15 mm GI pipe, complete all as specified and directed |
| 123 | S&F in repair Chromium plated,towel ring, complete all as specified. |
| 124 | S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. |
| 125 | S&F in repairVitreous China, wash basin white, flat back , size 400mmx300 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and as directed by Engineer-in-charge. |
| 126 | S&F in repair full pedestal for WHBcomplete all as specified. |
| 127 | Supply and fixing in repair Vitreous china ware pedestal type water closet white, with \"P\" or \"S\" trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. . |
| 128 | S&F 15mm bore CP jet spray for Padestal pattern WC all complete and as directed. |
| 129 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 130 | S&F in repairstainless steel Shop dishholder complete all as specified. |
| 131 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.\", complete all as specified. |
| 132 | Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen orlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed. |
| 133 | S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30\"x36\"x10\") fixed with steel fastners or steel screw complete. |
| 134 | S&F in repair stainless steel lock grating plain/hole size 100 mmdiaincluding embeding in tiles with white cement. |
| 135 | Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper onwalls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed. |
| 136 | Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads. |
| 137 | S & F 3.5 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (uptofourth storey with necessary scaffolding), all as specified. |
| 138 | S&F 3.5 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (uptofourth storey with necessary scaffolding), all as specified. |
| 139 | Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and also making good distrubed surfaces of wall,floors etc all as specified and directed by Engr In Charge |
| 140 | M&L for point wiring using FRLS-H PVC insulated unsheathed/ multistranded copper conductor cable 1.5 Sq mm drawn through in and including rigid PVC conduit concealed in wall not less than 25 mm dia as specified, with mild steel modular sunker box and outer and inner modular cover plate for fixing modular switch socket fan regulator etc. incl fittings such as tees, bend and junction boxes etc complete for following:- Make of Cable :- Havells/ Polycab or equivalent Make of Conduit:- As per IS |
| 141 | One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) |
| 142 | One 5 Amp socket outlet on independent board. |
| 143 | One 5 Amp socket outlet on same board. |
| 144 | All as per Item Srl No 139.00 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing). |
| 145 | S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar complete. |
| 146 | S&Fin replacementSPN 40 to 63 Amp, type \"C\"10KA, 240 Volts. |
| 147 | S&Fin replacement MCB SP 5 to 32 Amp, \"C\"10KA, 240 Volts. |
| 148 | S&F Switch piano, flush type 5 Amp, One Way. |
| 149 | S&F socket outlet2-in-1, 3 pin 5 Amp. |
| 150 | S&F Switch piano, flush type 15 Amp, . |
| 151 | S&Fsocket out let 2 in 1, 5 & 15 Amp flush type. |
| 152 | S&F ceiling rose 3 terminal size 50*65 mm surface type. |
| 153 | S&F Electronic fan regulator flush mounting step type 300-400 wattscomplete. |
| 154 | S&F LEDLights fitting 1x10 watt, 100 lumens wall mounted high pressure die cast aluminium fully diffused polycarbonate diffuser system efficacy 125 lumens per watt complete all as specified and directed. |
| 155 | S&F LEDLights fitting 1x20 watt, 2500 lumens wall mounted high pressure die cast aluminium fully diffused polycarbonate diffuser system efficacy 125 lumens per watt complete all as specified and directed. |
| 156 | S&F Metal finish wall light with maximum bulb wattage 12W base of lamp should be E27 colour of the fixture is white and silver with chrome finish and connected the same with using PVC sheathed and insulated 3 Core 23/0.0076 copper conductor cable incl all accessories and fixing arrangement all as specified and directed. |
| 157 | S & Replacement for angular typeLamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified \" |
| 158 | Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion. |
| 159 | S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC415 VOLTS16 KA=01 NO(for incoming )(b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)TheDB shall be VTPN series. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iv)All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost . |
| 160 | S&F LED wall security light of lumens 2550 lumens single piece high pressure die cast aluminium system eficacy 110 lumens/watt epoxy powder coated incl fixing clamp for light and connected with using PVC sheathed and insulated 3 Core 23/0.0076 copper conductor cable incl all accessoried and fixing arrangement all as specified and directed. |
| 161 | M & L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 10 sqmm alongwith earth wire of size 1 x 10sqmm concealed in wall surface with and including PVC conduit not less than 25mm dia complete all as specified and as directed by Engr in Charge. |
| 162 | S&F Dbox MCB protector socket PVC plastic base model white in color with 25A controlled MCB as specified and directed. |
| 163 | M & L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 4 sqmm alongwith earth wire of size 1 x 4sqmm concealed in wall surface with and including PVC conduit not less than 25mm dia complete all as specified and as directed by Engr in Charge. |
| 164 | M&L for modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor cable (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm thick (ISI Marked) with all accessories including suitable modular plate (inner and outer) and modular metallic boxes of suitable sizes (for mounting switches/sockets/regulators etc)including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to common earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/ colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half-Yellgulators/ ceiling roses etc.)ow, Earth-Green) |
| 165 | All as per srl item No 161.00 above but for call bell point complete all as specified and directed. |
| 166 | All as per srl item No 161.00 above but for One 5 Amp modular socket outlet on independent board. |
| 167 | All as per srl item No 161.00 above but for One 5 Amp modular socket outlet on same board. |
| 168 | M&L for replacement of existing un-serviceable switch piano with modular switch 1 way 6A, 1 module ISI marked complete all as specified and directed. |
| 169 | M&L for replacement of existing un-serviceable switch piano with modular switch 1 way 16A, 1 module ISI marked complete all as specified and directed. |
| 170 | M&L for replacement of existing un-serviceable socket with modular socket 6 amp AC 230 volts, 2 module ISI marked complete all as specified and directed. |
| 171 | M&L for replacement of existing un-serviceable socket with modular socket 16 amp AC 230 volts, 2 module ISI marked complete all as specified and directed. |
| 172 | M&L for replacement of existing un-serviceable bell push piano type with modular bell push 1 way 6A, 1 module ISI marked complete all as specified and directed. |
| 173 | Supply and fixing modular fan regulator step type 120W-2module |
| 174 | Supply and fixing electronic bell ding-dong AC 230 Volts single pole complete all as specified and directed. |
| 175 | S&F LEDLights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 176 | Supply, installation, testing and commissioning split type Air conditioner of capacity 2 Ton with 5 star rating suitable for hot & cold system complete inverter base compressor with all accessories, Make-LG, Blue star, Voltas |
| 177 | Supply, installation and testing of automatic voltage stabilizer 5 KVA 220 Volts, 50Hz, single phase suitable for input voltage 90V to 240V, out put voltage 220V +-5%. Make- V.Guard, Volina, ALBA |
| 178 | Supply, installation, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB32 Amp. |
| 179 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
