|
| 1 | Disconnecting of existing water tanks exc. 500 Ltrs but not exc 1000 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc |
| 2 | Disconnecting of existing water tanks exc. 250 Ltrs but not exc 500 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc |
| 3 | Dismantling ofBricks (laid flat or on edge) or brick tiles/cemented tiles in floors,roof,terrace, channels,kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as specifred and as directed. |
| 4 | Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster/demolition of cement concrete any thickness and removal of debris off the premisesincluding grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust. |
| 5 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)complete all as specifred and as directed. |
| 6 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof including mixing of water proofing compound as per manuacture instructionfinished and laid to required slope complete all as specified and as directed.(WPC shall be measured and paid separately) |
| 7 | M&L Rendering 5mm thck in CM 1:4 on Concrete surfaces of rooffinished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately) |
| 8 | M&LAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application incl Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified anddirected . |
| 9 | S&FRotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified |
| 10 | S&FRotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified |
| 11 | S&F in repair 25 mmTank Adaptor for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms25mm- 65gms, complete all as specified and directed. |
| 12 | Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store ,complete all asspecified and directed byby Engr-in-charge. |
| 13 | Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed |
| 14 | S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors ,complele all asspecified and directed byby Engr-in-charge. |
| 15 | S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors,complete all asspecified and directed byby Engr-in-charge. |
| 16 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed. |
| 17 | M&L for Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all asspecified and directed byby Engr-in-charge. |
| 18 | M&L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 ,complete all asspecified and directed byby Engr-in-charge. |
| 19 | All as per srl item No18 above but except bricks ,complete all asspecified and directed byby Engr-in-charge. |
| 20 | M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,complete all asspecified and directed byby Engr-in-charge. |
| 21 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces rendering to be finishedeven and smooth without using extra cement ,complete all asspecified and directed byby Engr-in-charge. |
| 22 | Preparation of new plastered or unplastered surfaces of Walls and applying three coats of white washingcomplete all as specified and as directed by Engineer-in-charge. |
| 23 | Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of Walls, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on Walls, complete all as specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces ofwalls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work ,complete all asspecified and directed byby Engr-in-charge. |
| 25 | M&L for Complete removal of existing treatment of oldplastered surfaces ofwalls and applyingDistempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"svspecificationcomplete all asspecified and directed byby Engr-in-charge. |
| 26 | M&L forProviding and applying plaster of paris puttyof 2 mm thickness over plastered surface toprepare the surface even and smooth complete all asspecified and directed byby Engr-in-charge. |
| 27 | M&L for Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) including water proofing compound i 2nd layer (supply of WPC paid seprately) complete all as specified and as directed by Engineer-in-charge. |
| 28 | supply only Liquid water proofing ,complete all asspecified and directed byby Engr-in-charge. |
| 29 | M&L for ApplyingFinishing walls with Acrylic Smooth exteriorpaint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/10 sqm) including prepration of new plastered surfaces of wallcomplete all ,complete all asspecified and directed byby Engr-in-charge.(Surface will be finished with appropriate rollar) |
| 30 | M&L for ApplyingFinishing walls with Acrylic Smooth exteriorpaint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/10 sqm) including prepration of Oldplastered surfaces of wallcomplete all ,complete all asspecified and directed byby Engr-in-charge. (Surface will be finished with appropriate rollar) |
| 31 | M&L forRendering 5 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed by Engineer-in-charge. |
| 32 | Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washingcomplete all as specified and as directed by Engineer-in-charge. |
| 33 | Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed. |
| 34 | Dismantlingfloor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all asspecified and directed byby Engr-in-charge. |
| 35 | M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed. |
| 36 | M&L forGlazed coloured ceramic tiles joint freein vertical surfaces of size 300 x 450 mm x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm thick rendering in CM 1:3on brick /concrete surfaces ,complete all asspecified and directed byby Engr-in-charge. |
| 37 | M&L forVirified Ceramic tiles 10 mmthick (square/ rectangular)polished, area of each tilesnot exceeding 0.36 sqm, infloors etc. set and jointed inneat cement slurry andpointed in white or colouredcement to matchr and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, ,complete all asspecified and directed byby Engr-in-charge. |
| 38 | Description all as item No 35 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete. |
| 39 | M& L for green Marble work 18 to 20mm thick (table rubbedand polished)insteps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marbles complete all as specified & directed by Engr-in-charge. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), all as specified and directed by Engineer-in-charge. |
| 41 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt). |
| 42 | S& F Anodised aluminium framePowder Coating (minimum thickness of powder coating 50 micron) for doors,windows, ventilators incl grillwith one or more rebates including joining cleat for fixing etc. complete all as specified& Directed by Engr-in-Charge |
| 43 | Anodised aluminium window and ventilator shutters,powder coating of any colour(Thickness or powder coating not less than 50 micron) side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified& Directed by Engr-in-Charge |
| 44 | M& L Powder coatingaluminium grill (Powder coating transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Powder coating aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge |
| 45 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 46 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,complete all asspecified and directed byby Engr-in-charge. |
| 47 | M&L for preparation of new or previouslyuntreatedsurface of steelor ironsurfaces of any descriptionover 10cm width or grithand applyingtwo coatsof synthetic enamel paintover a coat of red oxideprimer ,complete all asspecified and directed byby Engr-in-charge. |
| 48 | M&L for preparation of old painted steelor ironsurfaces of any descriptionover 10cm width or grithand applyingone coatsof synthetic enamel paintall as specified. |
| 49 | S&F Factory made 35mm thick, IInd class H.W rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all asspecified and directed byby Engr-in-charge. |
| 50 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all asspecified and directed byby Engr-in-charge. |
| 51 | S&F 35 mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters ,complete all asspecified and directed byby Engr-in-charge. |
| 52 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all asspecified and as directed by Engr-in-Charge. |
| 53 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplyingand fixing in the frame at site as per specification & drawing complete all asspecified and as directed by Engr-in-Charge |
| 54 | S&F butt hinges of mild steel cold rolled medium weight of size 100mm ,complete all asspecified and directed byby Engr-in-charge. |
| 55 | S&F in repair mild steelhelical ordinaryrat tail rod patternsprings300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work ,complete all asspecified and directed byby Engr-in-charge. |
| 56 | Pressed steel cup board frameof MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats includingbutt hinges 100 mm long. Piano hinges measured separately. |
| 57 | M&L for Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all asspecified and as directed by Engr-in-Charge. |
| 58 | S&F for Harrison rails, mild steel,anodised aluminium alloy with fixing brackets, stops,rollers etc. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),complete all asspecified and directed byby Engr-in-charge. |
| 59 | S&Fstainlesssteel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all asspecified and directed byby Engr-in-charge. |
| 60 | S&F Sheet glass, ordinary quality 2.5 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane ,complete all asspecified and directed byby Engr-in-charge. |
| 61 | S&F figured sheet glass , ordinary quality 4.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pain complete all as specified and directed. |
| 62 | S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all asspecified and directed byby Engr-in-charge. |
| 63 | S&F Aluminium handle 150 mm long cast type anodised, ,complete all asspecified and directed byby Engr-in-charge. |
| 64 | S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section ,complete all asspecified and directed byby Engr-in-charge. |
| 65 | S&F M.S. rat tail helical door spring (150 mm long) including roller and roller plate ,complete all asspecified and directed byby Engr-in-charge. |
| 66 | Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing ,complete all asspecified and directed byby Engr-in-charge. |
| 67 | S&F in RepairVitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting stands incl 32mm diawaste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 68 | S&F in RepairVitreous china WHB size 550x400mmPedestal type including incl 32mm diawaste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 69 | S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. |
| 70 | S&F in repair 15 mm Bib taps,chromium plated fancy typecast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified. |
| 71 | S&Fin repair15mm bore fancy type Brass CP wall mounted bath shower for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 72 | S&Fin repair15mm bore fancy type Brass Cp sink mixer deck mountedfor mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 73 | S&F in repair C.P. Angle valve/stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions ,complete all asspecified and directed byby Engr-in-charge. |
| 74 | S&F in repair C.P. pillar tap( fancy type 15mm bore)cast copper alloy with capsten head screwed down high pressure with or without letter \"Hot\" or \"Cold\" with long screw shank and flt nuts screwed for iron pipe ,complete all asspecified and directed byby Engr-in-charge. |
| 75 | S&F in repair Bevelled edge looking mirror 600x450mm selected quality glass mounted on 6mm thick AC building board or commercial ply with PVC frame ,complete all asspecified and directed byby Engr-in-charge. |
| 76 | S&F inBathroom wall mirror cabinet with soap /tooth brush holder/rack/ organizer/ storage plasticwall mount cabinet ( finishColour - white , door type levered , diy ( do -it-yourself))complete all asspecified and directed byby Engr-in-charge. |
| 77 | S&F in repairs tubular towel rail,brass chromium plated, 60cm long between flanges complete all as specified and directed |
| 78 | S&F in repair PVC connection 15mm size, 450mm long with PTMT nut ,complete all asspecified and directed byby Engr-in-charge. |
| 79 | S&Fin repair10 litres CapacityPVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs ofHigh or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any ,complete all asspecified and directed byby Engr-in-charge. |
| 80 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantileverbrackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm ,complete all asspecified and directed byby Engr-in-charge. |
| 81 | M& L cement concrete as in sunken floor ,mass concrete type C-2 1:3:6 40 mgraded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified and directed byby Engr-in-charge. |
| 82 | M&L cement concrete type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course (50 mm )including demolition of existing PCC of any description complete all as specified and directed byby Engr-in-charge. |
| 83 | M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 84 | M&L Providing, cement concrete1:2:4 Type B-1(using (20 mm graded ggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ,complete all asspecified and directed byby Engr-in-charge. |
| 85 | S&F in repairBrasschromiumplatedshower rosewith or without swivel joints, 125mm size, including fixing to steel pipe or union,complete all asspecified and directed byby Engr-in-charge. |
| 86 | S&Fin repair 15mm bore stop valve fancy type chromium plated withlong shank and cup (concealed type)screwed down, high pressurewith crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,,complete all asspecified and directed byby Engr-in-charge. |
| 87 | S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white,with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 88 | S & F Vitreous China wash down water closet pan (pedestal pattern), white includingfixing bolts, connection to drain/ trap (out going pipes ) and to flushing pipecomplete all as specified and directed. |
| 89 | S & Fplastic water closet seat cover (closed pattern)with PVC Hinging device for pedastal pans complete all as specified and directed. |
| 90 | S&F UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge. |
| 91 | S&F UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. |
| 92 | S&F UPVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge. |
| 93 | S&F UPVC(SWR)type B pipes 75 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. |
| 94 | S&F, UPVC (SWR) , bends for75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 95 | S&F, UPVC (SWR) , bends with access doorfor75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 96 | S&F, UPVC(SWR) , bendsfor110 mm borecomplete all as specified and as directed by Engineer-in-charge. |
| 97 | S&F, UPVC(SWR) , bends with access door, for110 mm borecomplete all as specified and as directed by Engineer-in-charge. |
| 98 | S&F, UPVC(SWR), junction single,(single \"T\") with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F UPVC (SWR) , reducers 110 mm dia complete all as specified. |
| 100 | S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified. |
| 101 | S&F in repair UPVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 102 | S&F in repair,UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. |
| 103 | M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,Including Demolition ofreinforced cement concrete of any discription ground to 2nd floors and removingthe rubbish from the work site out side defence premises complete all as specified. |
| 104 | M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips, ,complete all asspecified and directed byby Engr-in-charge. |
| 105 | M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete,complete all asspecified and directed byby Engr-in-charge. |
| 106 | S&F framed work such as grills, grating, etc. with ends of bars shoulders and /or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work confirming to Fe-290 including Dismantling wrought iron or mild steel work of any description not otherwise provided for. Gde-E-165 all as specified and asdirected. |
| 107 | M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workn exc. 10cm wide for fair finished surfaces of concrete,,complete all asspecified and directed byby Engr-in-charge. |
| 108 | M & L for 25 mm thickGranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of graniteIncluding Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. |
| 109 | Machine cutkota stone slab flooring 20-25mm thick including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishesand jointed with grey cement slurry mixed with pigment to match theshade of the slab including rubbing and polishing completecomplete all as specified & directed |
| 110 | Kota stone slab 20-25mm thickin riser of steps, skirting, dadoand pillar laid over cement screed and jointed with ditto as per item No.86 ,complete all asspecified and directed byby Engr-in-charge. |
| 111 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantileverbrackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified. |
| 112 | S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30\"x36\"x10\") fixed with steel fastners or steel screw complete. |
| 113 | M&L for 50 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), ,complete all asspecified and directed byby Engr-in-charge. |
| 114 | Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and also making good distrubed surfaces of wall,floors etc all as specified and directed by Engr In Charge |
| 115 | M&L for modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor cable (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm thick (ISI Marked) with all accessories including suitable modular plate (inner and outer) and modular metallic boxes of suitable sizes (for mounting switches/sockets/regulators etc)including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to common earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/ colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half-Yellgulators/ ceiling roses etc.)ow, Earth-Green) |
| 116 | All as per srl item No 115.00 above but for call bell point complete all as specified and directed. |
| 117 | All as per srl item No 115.00 above but for One 5 Amp modular socket outlet on independent board. |
| 118 | All as per srl item No 115.00 above but for One 5 Amp modular socket outlet on same board. |
| 119 | All as per Item Srl No 114.00 above but for one modular socket outlet 15/16 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing). |
| 120 | S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar complete. |
| 121 | S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete. |
| 122 | S&Fin replacementSPN 40 to 63 Amp, type \"C\"10KA, 240 Volts. |
| 123 | S&Fin replacement MCB SP 5 to 32 Amp, \"C\"10KA, 240 Volts. |
| 124 | M&L for replacement of existing un-serviceable switch piano with modular switch 1 way 6A, 1 module ISI marked complete all as specified and directed. |
| 125 | M&L for replacement of existing un-serviceable switch piano with modular switch 1 way 16A, 1 module ISI marked complete all as specified and directed. |
| 126 | M&L for replacement of existing un-serviceable socket with modular socket 6 amp AC 230 volts, 2 module ISI marked complete all as specified and directed. |
| 127 | M&L for replacement of existing un-serviceable socket with modular socket 16 amp AC 230 volts, 2 module ISI marked complete all as specified and directed. |
| 128 | M&L for replacement of existing un-serviceable bell push piano type with modular bell push 1 way 6A, 1 module ISI marked complete all as specified and directed. |
| 129 | Supply and fixing modular fan regulator step type 120W-2module |
| 130 | Supply and fixing electronic bell ding-dong AC 230 Volts single pole complete all as specified and directed. |
| 131 | S&F ceiling rose 3 terminal size 50*65 mm surface type. |
| 132 | S&F LEDLights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 133 | S & Replacement for angular typeLamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified \" |
| 134 | Supply and fix exhaust fan made of plastic body complete with lovers shutter, voltage 230v, 50 Hz, RPM 1200, copper winding of sweep 300 mm. Havells/Philips/Bajaj/USHA/KHATAN |
| 135 | Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion. |
| 136 | S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC415 VOLTS16 KA=01 NO(for incoming )(b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)TheDB shall be VTPN series. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iv)All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost . |
| 137 | S&F LED Street light fitting 35 watt 230 v AC out door type with high pressure die complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. |
| 138 | M&L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 10 sqmm alongwith earth wire of size 1 x 10 sqmm on wall surface with and including PVC casing caping of suitable size complete all as specified and as directed by Engr in charge. |
| 139 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. |
