|
| 1 | Servicing Commissioning & Testing of existing 500 KVA Transformer |
| 2 | Servicing Commissioning & Testing of existing 500 KVA Transformer |
| 3 | Filtration & Dehydration of existing 500 KVA Transformer Oil |
| 4 | Supply Of TRF OIL of existing 500 KVA Transformer Oil |
| 5 | Supply of Silica gel with Britcher including hiring of Filtration Machine |
| 6 | Service & repairing of following diesel generator through OEM authorised agencies with all requisite materials like engine oil,coolant,oil filter,fuel filter,fuel pipe,hose pipe, relay-contactor etc all complete with freight & labour charge as per direction of EIC. |
| 7 | 125 KVA DG-Make Kirloskar |
| 8 | Repairing of existing street lights with OEM parts & accessories of following watt including renewing of frame,glass, drivers,clamps accessories whatever necessery all complete as per instruction of EIC |
| 9 | 90 watt |
| 10 | 35 watt |
| 11 | 60 watt |
| 12 | SITC of LED street light 60W(make: surya)(without pole) |
| 13 | SITC of LT panel contactor including accessories & labour charges all complete as per direction of EIC. |
| 14 | SITC submeter 50Amp single phase all complete as per direction of EIC. |
| 15 | SITC of contactor in existing LT panel including accessories & labour charges all complete as per direction of EIC. |
| 16 | Repairing of existing flood lights OEM parts & accessories ranging from 250V,200V,150V including renewing of frame,glass, accessories whatever necessery all complete as per instruction of EIC |
| 17 | 250Watt |
| 18 | 200Watt |
| 19 | 150Watt |
| 20 | 120Watt |
| 21 | 100Watt |
| 22 | Servicing & testing through OEM agency of following HT & LT systemwith all requisite materials all complete with freight & labour charge as per direction of EIC.RMU(make- L&T), VCB-I & II(make ABB, 800 Amp) 02 Nos CSS(make L&T) 02 nos LT Panel(make L&T) 01 Nos OLTC TFR (make CG)01 Nos AMF panel( make-NA)03 Nos Capacitor bank panal (01 Nos 150 KVAR & 2 Nos 300 KVAR)Earthing- 35 Nos |
| 23 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. |
| 25 | Providing and fixing precoated galvanised steel sheet roofingaccessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester topcoat 15-18 microns using self drilling/ self tapping screws complete :Flashings/ Aprons.( Upto 600 mm) |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 27 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal sizederived from natural sources) |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 29 | 12 mm cement plaster finished with a floating coat of neat cement ofmix : 1:3 (1 cement: 3 fine sand) sqm |
