Tender For Construction Of Vatsalya Sadan At Budgam, Budgam-Jammu And Kashmir

TDR : 53678093

Tender Notice
BOQ

15 Days Left

Budgam , Jammu And Kashmir

Tender Brief : Tender For Construction Of Vatsalya Sadan At Budgam

Document Fees
₹ 5500 /-

EMD
₹ 643760.0 /-

Tender Value
₹ 3.21 Crore /-

Submission Date
12-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Work (PART \"A\") Construction of Proposed Observation Home at Vatsalya Sadan Budgam
2	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils
3	P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job.
4	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage.
5	Providing and laying in position specified grade of reinforced cement concrete, including curing but excluding the cost of centering, shuttering, finishing and reinforcement.- All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level, upto floor five level including curing but excluding cost of centering, shuttering, finishing and reinforcement.
7	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
8	Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
9	Centring and shuttering including strutting, propping etc and removal of form work:
10	foundation,footings etc
11	Suspended floors, roofs, landings, balconies and access platform.
12	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
13	Stairs (excluding landings) except spiral staircases.
14	Edges of slabs and breaks in floors and walls
15	Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.
16	Supplying filling of watering compacting and dressing nallah muck under floors including all carriage lead lifts complete.
17	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
18	Brick work with FPS bricks of class designation 75 in upto floor V-level in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job.
19	Half brickworkwith common burnt clay in superstructure, above floor V level for every four floors or part thereof by mechanical means in Cement mortar 1:3 ( 1 cement : 3 coarse sand)
20	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln seasoned and chemically treated hollock wood incl. all carriages leads and lift complete job
21	Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, kiln dried imported/seasoned timber.35mm incl. all carriages leads and lift complete job
22	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln seasoned & chemically treated imported wood incl. all carriages leads and lift complete job
23	Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws 35 mm Kiln seasoned and chemically treated imported wood incl. all carriages leads and lift complete job
24	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge of 35 mm kiln dried timber incl. all carriages leads and lift complete job
25	Providing and fixing with 3.5mm float glass including beading incl. all carriages leads and lift complete job
26	12 mm cement plaster on rough side of brick wall in1:4(1 cement : 4 fine sand mortar)
27	6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
28	12 mm EXTERNAL cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar) of required design as per specifications provided by the consultant including necessary scaffolding arrangements
29	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick incl. all carriages leads and lift complete job
30	Distempering with oil bound distemper of app brand and manufacture incl. all carriages leads and lift complete job
31	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)etc incl. all carriages leads and lift complete job
32	Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete job (two coats) incl. all carriages leads and lift complete job
33	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.
34	Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm)
35	Cement concrete Flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) with 20mm nominal size stone aggregate etc.complete job
36	Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade incl. all carriages leads and lift complete job
37	VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incl. all carriages leads and lift complete job
38	Providing and laying Marble stone flooring laid in required pattern in linear portion of the building all complete with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge incl. all carriages leads and lift of marbles complete job
39	Providing edge Double moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble Work
40	Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.including carriage
41	Providing / Fixing pre coated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer incharge)0.50mm (+0.05%) total coated thickness with zinc coating 120 garms per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet etc. incl ridges and valleys
42	Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :in Budloo incl. all carriages leads and lift complete job
43	Providing and fixing 12 mm thick plywood board in partitions and ceilings excluding frame work but including all necessary hardware and fittings incl. all carriages leads and lift complete job
44	Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size ) incl. all carriages leads and lift complete job
45	Providing and fixing M.S. railing of required pattern with M.S. square or round tubes,flats, built up or single sections as per the specifications provided by the consultantetc including priming coat with approved steel primer all complete including all carriage leads and lifts.
46	Making plinth protection 50mm thick of cement concrete 1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, leveling and dressing and finishing the top smooth and curing complete
47	Providing dash fasteners/ iron hold fast 40x5mm flat 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocl 30x10x15cm in 1:3:6 mix. incl. all carriages leads and lift complete job
48	Providing and fixing of Hardware fittings (Alloy) as per approved samples incl. all carriages leads and lift complete job
49	100mm Handle
50	150 mm Handle
51	100mm Tower bolt
52	150mm Tower bolts
53	Stay hooks
54	L drop 10\"
55	Sanitary
56	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils
57	P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job.
58	Providing and laying in position specified grades of reinforced cement concrete 1:1.5:3 in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All works upto the plinth level
59	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage.
60	Centring and shuttering including strutting, propping etc and removal of form work:
61	Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.incl carriage
62	P/L of dry rubble masonry with hard stone in foundation and plinth incl. all carriages involved
63	15 mm cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar)
64	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete 25 mm thick with 20mm nominal size stone aggregate etc.complete job
65	Brick with FPS bricks of class designation 75 in in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job.
66	Providing and fixing 3 layer PP-R (Poly propylene Random co polymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.
67	25 mm OD Pn20
68	40 mm OD Pn20
69	50 mm OD Pn20
70	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes Pn20, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc
71	pipe 25mm
72	PPR Union 25mm
73	PPR Union 40mm
74	PPR Union 50mm
75	PPR Adapter 25mm
76	PPR Adapter 40mm
77	PPR Adapter 50mm
78	a) 25mm dia OD
79	BALL VALVE TANK 25MM
80	b) 40 mm dia OD
81	BALL VALVE TANK 40MM
82	b) 50 mm dia OD
83	BALL VALVE TANK 50MM
84	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
85	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
86	Providing and fixing 15 mm nominal bore C.P. brass angle valve approved quality conforming to IS : 8931
87	P/F CP long brass wall mixer of approved quality and make as approved by engineeh-in-charge 15mm dia
88	P/F CP brass Double lever wall mixer with concealed shower of approved quality and make as approved by engineeh-in-charge 15mm dia
89	Providing and fixing CP Brass shower rose including arm and Flange with 15 or 20 mm inlet 100mm Shower
90	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
91	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern.
92	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
93	P/F white vitreous china pedestal for wash basin complete rested at back for the reception of pipe and fittings
94	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm
95	P/F Cp waste 32mm including waste pipe and all fixtures.
96	P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make.
97	P/F of bevelled edge mirror of superior glass of approved quality complete fixed to PVC rawl plug with C P Brass screws complete job
98	P/F of 600 x 120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C P Brass bracket and guard rail fixed with 40 mm long screws complete job
99	P/F in position PVC floor traps
100	100mm
101	P/F soil, waste and vent pipes of medium Class
102	a)PVC S&S pipe (150mm dia)
103	a)PVC S&S pipe (100mm dia)
104	c)PVC S&S pipe (75mm dia)
105	d)PVC S&S pipe (50mm dia)
106	PVC Cowell 50/75 mm dia
107	P/F PVC stay and clamps for PVC pipes
108	a) 100mm
109	b) 75mm
110	P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes appropriate class
111	a) 100mm
112	b) 75mm
113	P/F plain bend of standard make
114	a) 100mm
115	b) 75mm
116	c)50mm
117	P/F T Junction of standard make
118	a) 100mm
119	b) 75mm
120	P/F Door T junction of standard make
121	a)100mm
122	a)75mm
123	P/F PVC Reducer 100-50mm dia
124	P/F PVC Reducer 100-75mm dia
125	PVC Collar 100mm
126	PVC Collar 75mm
127	Providing and fixing CP soap case of approved quality
128	Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floortraps and floor drains with cement mortar, complete in all respects.
129	Providing & fixing of 15mm dia PVC connection 600mm long including endunion and washers complete.
130	Constructing brick masonry chamber for underground PIPES inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :.Inside dimensions as per requirement mm for singlepipe line with one or two inlets
131	P/F master trap
132	2 HP Motor of standard make including fixing
133	Hot water geyser of standard make 50 Liter
134	Carriage of Stone Soling For an average lead of 35kms
135	Carriage of Bricks For an average lead of 7kms
136	Carriage of Sand For an average lead of 40kms
137	Carriage of Aggregate for an average lead of 7km
138	Carriage of Stones for an average lead of 10km
139	Electrification
140	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab /Finolex /RR Kabels /Anchor /Salzer make to be approved by EIC before installation. in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and allied accessories like bends .lighting conceal deeps and fan deeps etc ) , with 6Amps modular switch, modular plate of Anti backteria series of Schneider /ABB /L&T /Legrand /Simens make , suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( P+N+E for Normal and invertor points per room is to be provided seperately).The Job further includes providing and fixing of heavy duty Metallic conceled deeps and Fan junction deeps of standard make dully isi marked (to be approved by EIC before installation) actual numbers to be provided as per site requirement and as per instructions of EIC complete job
141	Point wiring for 10 Amp Socket out lets with 3x2.5 sq mm (P+N+E) FRLs PVC insulated 660/1100 volt grade flexible stranded (50 strands of 0.25 mm dia.) copper conductor wires of Polycab/Finolex /Anchor/ RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ).The Job further Includes supply and fixing modular grid plate mounted flush mounted 2 no 240 volts 6-16 Amp 5 pin socket out let along with 2 No\"s of 6-16 Amp control Switch to be housed in 6-Way heavy duty GI Modular Box with modular cover plate of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make , complete as per specification and as required . The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires
142	Point wiring for 16 Amp Socket out lets with 3x4 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires of Polycab/Finolex/Anchor/RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ) .The job further includes the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make to be housed in heavy duty 4-Modular GI Box of same make as of switches /sockets with p/f of modular cover plate , complete as per specification and as required with inter connection complete as per specifications and as required. The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires
143	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits for housing of upto 4 Sq.mm wires and 32 mm dia for housing of above 4 Sq.mm wires including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job ) as required. of Polycab / Finolex /Anchor / RR Kabels /Salzer make to be approved by EIC before installation. .
144	2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire
145	2 X4 sq. mm + 1 X4 sq. mm earth wire
146	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
147	2 X 10 sq. mm +1 X 6 sq. mm earth wire
148	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
149	Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.
150	Supply and fixing of Indicators (Modular type) fitted on modular grid plate and GI Boxes complete job
151	Supply and laying of 19-25 mm dia medium class PVC medium grade Conduit to be laid on surface with screws fixed in rowel plugs complete with all allied accrues like bends, tees etc. for paving way of laying of wires of haeting points /circuits ,machine points /circuits and sub mains .The Job includes cutting of walls with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P.O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to effected area\"s.Anchor/Polycab/Finolex/TMT Plus make.
152	Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/\N) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (ma><.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation.
153	Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation. incl making of necessary connections and making of necessary space in walls / Windows as per site.
154	Supply, Installation, Testing and commissioning of 12 watt LED surface/recessed Down lighters having CRCA /Aluminium Body ,minimum lumens 100 lm/w (commercial type) ,the luminaries housing should be crca /aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of make incl making of necessary Connections. ). The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. of Wipro/ Helonix /Jaguar /Trulux / Crompton make to be approved by EIC before installation.
155	Supply ,installation ,Testing and Commissioning of 10-12 Watts ,2 ft long LED tube light fitting having PVC Body (Commercial type) of Wipro/ Helonix /Jaguar /Trulux / Crompton make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.
156	Supply, Installation, Testing and commissioning of 50 Watts LED flood lighting luminaries having CRCA /Aluminium Body ,minimum lumens 100 lm/w ,the luminaries housing should be crca /aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of Wipro/ Helonix /Jaguar /Trulux / Crompton make make incl making of necessary Connections. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of one years reckoned from date of successful commissioning /handing over of site to intending department.
157	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
158	6 way (4 + 18), Double door
159	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required of legrand / ABB /Schneider /L&T /Simens make
160	Supplying and fixing of 32 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
161	Supplying and fixing of 40 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.of Legrand / ABB /Schneider /L&T /Simens make
162	Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections
163	Supply/ installation/testing and commissioning of Wall / floor mounted compartmentalized , 415 volts TPN MCCB Main Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, duly painted with powder coating ( not less than 80 microns ) incl earth terminal with all necessary accessories as required for panel (IP 54) with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming (1A) 250 Amp TPN MCCB with breaking capacity of 50 KA thermo magnetic adjustable based of Legrend /Schinder /Simens / ABB make with extended rotory handle and phase spreaders on i/p and o/p side = 1 no (1B) 400 Amp TPN Aluminium Bus bar = 1 Set ( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 40 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 400 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (2) Generator Incomer 100 Amp F.P Change over switch of Havels./HPL /Standard make = 1 no200 Amp TPN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (3) Generator Incommer 125 Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 1 No 200 Amp PN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (4) Outgoing .100 Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No 63 Amps Double Pole MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No40 Amps Double Pole MCB (10 KA)of Legrend /Schinder /Simens / ABB make = 4 No The Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS 61439 and the Contractor has to submit the test certificate of main switch gear\"s and Drawing\"s of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards ) & is to approved by Department not less than the rank of SDO before manufacturing of panel.
164	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
165	3 1/2 X 185 sq.mm(57 mm) for Normal Supply Cable
166	3 1/2 X 70 sq.mm(38 mm) for Generator Supply Cable
167	Supply,Laying,Testing & Commissioning of 95 sq.mm 3.5- core armored Al Cable XLPE/ PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections
168	Supply,Laying,Testing & Commissioning of 70 sq.mm 3.5- core armored Al Cable XLPE/ PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections
169	Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoall coke and salt as required.The job includes providing and fixing of main hole PVC Chamber with its cover complete job
170	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
171	PART \"B\" (Civil Work) Construction of Proposed Special Home at Vatsalya Sadan Budgam
172	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils
173	P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job.
174	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage.
175	Providing and laying in position specified grade of reinforced cement concrete, including curing but excluding the cost of centering, shuttering, finishing and reinforcement.- All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
176	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level, upto floor five level including curing but excluding cost of centering, shuttering, finishing and reinforcement.
177	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
178	Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
179	Centring and shuttering including strutting, propping etc and removal of form work:
180	Footings foundations, bases of column
181	Suspended floors, roofs, landings, balconies and access platform.
182	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
183	Stairs (excluding landings) except spiral staircases.
184	Edges of slabs and breaks in floors and walls
185	Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.
186	Supplying filling of watering compacting and dressing nallah muck under floors including all carriage lead lifts complete.
187	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
188	Brick work with FPS bricks of class designation 75 in upto floor V-level in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job.
189	Half brickworkwith common burnt clay in superstructure, above floor V level for every four floors or part thereof by mechanical means in Cement mortar 1:3 ( 1 cement : 3 coarse sand)
190	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln seasoned and chemically treated hollock wood incl. all carriages leads and lift complete job
191	Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, kiln dried imported/seasoned timber.35mm incl. all carriages leads and lift complete job
192	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln seasoned & chemically treated imported wood incl. all carriages leads and lift complete job
193	Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws 35 mm Kiln seasoned and chemically treated imported wood incl. all carriages leads and lift complete job
194	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge of 35 mm kiln dried timber incl. all carriages leads and lift complete job
195	Providing and fixing with 3.5mm float glass including beading incl. all carriages leads and lift complete job
196	12 mm cement plaster on rough side of brick wall in1:4(1 cement : 4 fine sand mortar)
197	6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
198	12 mm EXTERNAL cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar) of required design as per specifications provided by the consultant including necessary scaffolding arrangements
199	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick incl. all carriages leads and lift complete job
200	Distempering with oil bound distemper of app brand and manufacture incl. all carriages leads and lift complete job
201	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)etc incl. all carriages leads and lift complete job
202	Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete job (two coats) incl. all carriages leads and lift complete job
203	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.
204	Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm)
205	Cement concrete Flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) with 20mm nominal size stone aggregate etc.complete job
206	Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade incl. all carriages leads and lift complete job
207	VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incl. all carriages leads and lift complete job
208	Providing and laying Marble stone flooring laid in required pattern in linear portion of the building all complete with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge incl. all carriages leads and lift of marbles complete job
209	Providing edge Double moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble Work
210	Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.including carriage
211	Providing / Fixing pre coated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer incharge)0.50mm (+0.05%) total coated thickness with zinc coating 120 garms per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet etc. incl ridges and valleys
212	Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :in Budloo incl. all carriages leads and lift complete job
213	Providing and fixing 12 mm thick plywood board in partitions and ceilings excluding frame work but including all necessary hardware and fittings incl. all carriages leads and lift complete job
214	Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size ) incl. all carriages leads and lift complete job
215	Providing and fixing M.S. railing of required pattern with M.S. square or round tubes,flats, built up or single sections as per the specifications provided by the consultantetc including priming coat with approved steel primer all complete including all carriage leads and lifts.
216	Making plinth protection 50mm thick of cement concrete 1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, leveling and dressing and finishing the top smooth and curing complete
217	Providing dash fasteners/ iron hold fast 40x5mm flat 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocl 30x10x15cm in 1:3:6 mix. incl. all carriages leads and lift complete job
218	Providing and fixing of Hardware fittings (Alloy) as per approved samples incl. all carriages leads and lift complete job
219	100mm Handle
220	150 mm Handle
221	100mm Tower bolt
222	150mm Tower bolts
223	Stay hooks
224	L drop 10\"
225	Sanitary
226	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils
227	P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job.
228	Providing and laying in position specified grades of reinforced cement concrete 1:1.5:3 in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All works upto the plinth level
229	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage.
230	Centring and shuttering including strutting, propping etc and removal of form work:
231	Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.incl carriage
232	P/L of dry rubble masonry with hard stone in foundation and plinth incl. all carriages involved
233	15 mm cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar)
234	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete 25 mm thick with 20mm nominal size stone aggregate etc.complete job
235	Brick with FPS bricks of class designation 75 in in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job.
236	Providing and fixing 3 layer PP-R (Poly propylene Random co polymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.
237	25 mm OD Pn20
238	40 mm OD Pn20
239	50 mm OD Pn20
240	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes Pn20, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc
241	pipe 25mm
242	PPR Union 25mm
243	PPR Union 40mm
244	PPR Union 50mm
245	PPR Adapter 25mm
246	PPR Adapter 40mm
247	PPR Adapter 50mm
248	a) 25mm dia OD
249	BALL VALVE TANK 25MM
250	b) 40 mm dia OD
251	BALL VALVE TANK 40MM
252	b) 50 mm dia OD
253	BALL VALVE TANK 50MM
254	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
255	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
256	Providing and fixing 15 mm nominal bore C.P. brass angle valve approved quality conforming to IS : 8931
257	P/F CP long brass wall mixer of approved quality and make as approved by engineeh-in-charge 15mm dia
258	P/F CP brass Double lever wall mixer with concealed shower of approved quality and make as approved by engineeh-in-charge 15mm dia
259	Providing and fixing CP Brass shower rose including arm and Flange with 15 or 20 mm inlet 100mm Shower
260	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
261	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern.
262	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
263	P/F white vitreous china pedestal for wash basin complete rested at back for the reception of pipe and fittings
264	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm
265	P/F Cp waste 32mm including waste pipe and all fixtures.
266	P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make.
267	P/F of bevelled edge mirror of superior glass of approved quality complete fixed to PVC rawl plug with C P Brass screws complete job
268	P/F of 600 x 120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C P Brass bracket and guard rail fixed with 40 mm long screws complete job
269	P/F in position PVC floor traps
270	100mm
271	P/F soil, waste and vent pipes of medium Class
272	a)PVC S&S pipe (150mm dia)
273	a)PVC S&S pipe (100mm dia)
274	c)PVC S&S pipe (75mm dia)
275	d)PVC S&S pipe (50mm dia)
276	PVC Cowell 50/75 mm dia
277	P/F PVC stay and clamps for PVC pipes
278	a) 100mm
279	b) 75mm
280	P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes appropriate class
281	a) 100mm
282	b) 75mm
283	P/F plain bend of standard make
284	a) 100mm
285	b) 75mm
286	c)50mm
287	P/F T Junction of standard make
288	a) 100mm
289	b) 75mm
290	P/F Door T junction of standard make
291	a)100mm
292	a)75mm
293	P/F PVC Reducer 100-50mm dia
294	P/F PVC Reducer 100-75mm dia
295	PVC Collar 100mm
296	PVC Collar 75mm
297	Providing and fixing CP soap case of approved quality
298	Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floortraps and floor drains with cement mortar, complete in all respects.
299	Providing & fixing of 15mm dia PVC connection 600mm long including endunion and washers complete.
300	Constructing brick masonry chamber for underground PIPES inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :.Inside dimensions as per requirement mm for single pipe line with one or two inlets
301	P/F master trap
302	2 HP Motor of standard make including fixing
303	Hot water geyser of standard make 50 liters
304	Carriage of soling For an average lead of 35 kms
305	Carriage of Bricks For an average lead of 7kms
306	Carriage of Sand For an average lead of 40kms
307	Carriage of 40mm Aggregate for an average lead of 7km
308	Carriage of Stones for an average lead of 10km
309	Electrification
310	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab /Finolex /RR Kabels /Anchor /Salzer make to be approved by EIC before installation. in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and allied accessories like bends .lighting conceal deeps and fan deeps etc ) , with 6Amps modular switch, modular plate of Anti backteria series of Schneider /ABB /L&T /Legrand /Simens make , suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( P+N+E for Normal and invertor points per room is to be provided seperately).The Job further includes providing and fixing of heavy duty Metallic conceled deeps and Fan junction deeps of standard make dully isi marked (to be approved by EIC before installation) actual numbers to be provided as per site requirement and as per instructions of EIC complete job
311	Point wiring for 10 Amp Socket out lets with 3x2.5 sq mm (P+N+E) FRLs PVC insulated 660/1100 volt grade flexible stranded (50 strands of 0.25 mm dia.) copper conductor wires of Polycab/Finolex /Anchor/ RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ).The Job further Includes supply and fixing modular grid plate mounted flush mounted 2 no 240 volts 6-16 Amp 5 pin socket out let along with 2 No\"s of 6-16 Amp control Switch to be housed in 6-Way heavy duty GI Modular Box with modular cover plate of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make , complete as per specification and as required . The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires
312	Point wiring for 16 Amp Socket out lets with 3x4 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires of Polycab/Finolex/Anchor/RR Cabels /Salzer make to be approved by EIC before installation. , to be laid in recessed or surface conducting system (25 mm dia medium class PVC Conduits including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job including cost of conduits and its allied accessories ) .The job further includes the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of Anti fungal & Anti Bacterial of ABB /L&T / legrend /Simens make to be housed in heavy duty 4-Modular GI Box of same make as of switches /sockets with p/f of modular cover plate , complete as per specification and as required with inter connection complete as per specifications and as required. The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit Complete as required Complete Job including conduits ,Switches ,Sockets and wires
313	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits for housing of upto 4 Sq.mm wires and 32 mm dia for housing of above 4 Sq.mm wires including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering /pop / paiting etc complete job ) as required. of Polycab / Finolex /Anchor / RR Kabels /Salzer make to be approved by EIC before installation. .
314	2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire
315	2 X4 sq. mm + 1 X4 sq. mm earth wire
316	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
317	2 X 10 sq. mm +1 X 6 sq. mm earth wire
318	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
319	Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.
320	Supply and fixing of Indicators (Modular type) fitted on modular grid plate and GI Boxes complete job
321	Supply and laying of 19-25 mm dia medium class PVC medium grade Conduit to be laid on surface with screws fixed in rowel plugs complete with all allied accrues like bends, tees etc. for paving way of laying of wires of haeting points /circuits ,machine points /circuits and sub mains .The Job includes cutting of walls with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P.O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to effected area\"s.Anchor/Polycab/Finolex/TMT Plus make.
322	Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/\N) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (ma><.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation.
323	Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha / Crompton Greaves / Orient /Helonix to be approved by EIC before installation. incl making of necessary connections and making of necessary space in walls / Windows as per site.
324	Supply, Installation, Testing and commissioning of 12 watt LED surface/recessed Down lighters having CRCA /Aluminium Body ,minimum lumens 100 lm/w (commercial type) ,the luminaries housing should be crca /aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of make incl making of necessary Connections. ). The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. of Wipro/ Helonix /Jaguar /Trulux / Crompton make to be approved by EIC before installation.
325	Supply ,installation ,Testing and Commissioning of 10-12 Watts ,2 ft long LED tube light fitting having PVC Body (Commercial type) of Wipro/ Helonix /Jaguar /Trulux / Crompton make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.
326	Supply, Installation, Testing and commissioning of 50 Watts LED flood lighting luminaries having CRCA /Aluminium Body ,minimum lumens 100 lm/w ,the luminaries housing should be crca /aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of Wipro/ Helonix /Jaguar /Trulux / Crompton make make incl making of necessary Connections. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of one years reckoned from date of successful commissioning /handing over of site to intending department.
327	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
328	6 way (4 + 18), Double door
329	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required of legrand / ABB /Schneider /L&T /Simens make
330	Supplying and fixing of 32 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
331	Supplying and fixing of 40 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.of Legrand / ABB /Schneider /L&T /Simens make
332	Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections
333	Supply/ installation/testing and commissioning of Wall / floor mounted compartmentalized , 415 volts TPN MCCB Main Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, duly painted with powder coating ( not less than 80 microns ) incl earth terminal with all necessary accessories as required for panel (IP 54) with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming (1A) 250 Amp TPN MCCB with breaking capacity of 50 KA thermo magnetic adjustable based of Legrend /Schinder /Simens / ABB make with extended rotory handle and phase spreaders on i/p and o/p side = 1 no (1B) 400 Amp TPN Aluminium Bus bar = 1 Set ( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 40 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 400 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (2) Generator Incomer 100 Amp F.P Change over switch of Havels./HPL /Standard make = 1 no200 Amp TPN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (3) Generator Incommer 125 Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 1 No 200 Amp PN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (4) Outgoing .100 Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No 63 Amps Double Pole MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No40 Amps Double Pole MCB (10 KA)of Legrend /Schinder /Simens / ABB make = 4 No The Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS 61439 and the Contractor has to submit the test certificate of main switch gear\"s and Drawing\"s of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards ) & is to approved by Department not less than the rank of SDO before manufacturing of panel.
334	Supply/ installation/testing and commissioning of Wall / floor mounted compartmentalized , 415 volts TPN MCCB Main Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, duly painted with powder coating ( not less than 80 microns ) incl earth terminal with all necessary accessories as required for panel (IP 54) with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming (1A) 160 Amp TPN MCCB with breaking capacity of 50 KA thermo magnetic adjustable based of Legrend /Schinder /Simens / ABB make with extended rotory handle and phase spreaders on i/p and o/p side = 1 no (1B) 200 Amp TPN Aluminium Bus bar = 1 Set ( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 400 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (2) Generator Incomer 63 Amp F.P Change over switch of Havels./HPL /Standard make = 1 no200 Amp TPN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (3) Generator Incommer 100 Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 1 No 200 Amp PN Bus bar Al Strips = 1 Set( Bus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimum size 20 mm x 10 mm with spacing as per latest IE Standards) (1C) One No. (1 No.) digital multifunctional meter for measurement of voltage ,current and power etc with Selector switch ,push battons and one set of CT\"s of ratio 100 A/5A ,CL 1.0 ,15VA .(1D) 3 No\"s (3 No\"s) phase indication lamps and 3 No.\"s status indication lamp for ON / OFF /TRIP with Control SP MCB (4) Outgoing .63Amps DP MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No 40 Amps Double Pole MCB (10 KA) of Legrend /Schinder /Simens / ABB make = 4 No32 Amps Double Pole MCB (10 KA)of Legrend /Schinder /Simens / ABB make = 4 No The Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS 61439 and the Contractor has to submit the test certificate of main switch gear\"s and Drawing\"s of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards ) & is to approved by Department not less than the rank of SDO before manufacturing of panel. for Special Home
335	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
336	3 1/2 X 185 sq.mm(57 mm) for Normal Supply Cable
337	3 1/2 X 70 sq.mm(38 mm) for Generator Supply Cable
338	Supply,Laying,Testing & Commissioning of 95 sq.mm 3.5- core armored Al Cable XLPE/ PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections
339	Supply,Laying,Testing & Commissioning of 70 sq.mm 3.5- core armored Al Cable XLPE/ PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections
340	Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoall coke and salt as required.The job includes providing and fixing of main hole PVC Chamber with its cover complete job
341	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Vatsalya Sadan At Budgam, Budgam-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Vatsalya Sadan At Budgam, Budgam-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us