|
| 1 | Dismantling and removing lime concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris within 50m lead per 1 sqm etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 2 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead (AR 2006 Page No 218 item No 13) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 3 | Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 4 | Supplying, fitting and fixing vitrified coloured and printed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed in floors treads or stepps and landing on 25mm thick bed of Cement mortar 1:3 ( 1 Cement : 3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeof required thickness and filling joints with epoxy grout of approved quality including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge.(AoR 2006 Page No 89 item No 16) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 5 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams. (Sal wood chowkat refer item no.2 of A/R 2006 page- 132.) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 6 | 2.5cm thick sal wood frame and 19mm thick planked door shutters complete with iron fitting and wooden hinged cleats etc, but excluding the cost of iron fittings.(AoR 2006 Page no- 136, item no-13) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 7 | Removing old grading plaster from roof slab, cleaning the surface, lowering and removing the debris within 50m lead (AR 2006 Page No 220 item No 21) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 8 | 4 cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work. (AR 2006 page no 48 item no 18) etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge |
| 9 | Painting two coats over a coat of priming with approved paint and primer on wood and iron work including cost of paint and primer etc complete as per specification and direction of the Engineer-in-charge. |
| 10 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. including cost of materials all taxes labour t&P etc complete as per direction of EIC. |
| 11 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 12 | Finishing wall surface with Acrylic wall putty( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 13 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper etc. complete as per specification and direction of the Engineer-in-charge. |
| 14 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 15 | Finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with T&P required for the work etc. complete in all floors etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge. |
| 16 | Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc complete including 1% CESS & as per the direction & specification of the Engineer-in-Charge Please Enable Macros to View BoQ information |
