|
| 1 | Taking down chowkhats or framen.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 2 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed. |
| 4 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge |
| 6 | Solid PVC board 20-22mm thick, with 2mm thick moulded prelam PVC sheet on the front face & 2mm relam PVC sheet on back with particle board core fixing in frame at site to cup board sutter, sheleves and kitchen cabinet complete all as specified and directed. |
| 7 | 18/19 thick Plywood, grade BWP, type BB fixed with screws to timber frame work, for shelf in cupboard & kitchen cabinet including wooden clit all necessary fitting complete all specified and directed. |
| 8 | Continuous (piano) hinges, mild steel bright finish, width of flap when open30mm, as in repair complete all as specified and directed. |
| 9 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 10 | PVC body magnetic shutter catcher for cup boards, fixed with standard steel screws,complete all as specified and directed. |
| 11 | 100 mm size butt hinges medium weight cold rolled stainless steel complete, all as specified and directed. |
| 12 | D\" type, 100mmExtruded aluminium alloy handle fabricated typecomplete all as specified and directed. |
| 13 | 100 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 14 | Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 15 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 16 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples/ aluminum beading,complete all as specified & directed. |
| 17 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples/ FI beading including all necessary nut bolt,fixed as in repair complete all as specified & directed. |
| 18 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 19 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes,including hacking out old broken glass complete all as specified and directed. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 21 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; manhole cover; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0,complete all as specified and directed. |
| 22 | Mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required,complete all as specified and directed. |
| 23 | Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 24 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and directed. |
| 25 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and directed. |
| 26 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 27 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 28 | 30mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and directed. |
| 29 | Glazed and gauged skeleton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause8.20 (a) including Kiln seasoned and chemically pressure treated,complete all as specified & directed. |
| 30 | preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | 200 mm size aluminium , barrel tower bolt of extruded section and complete all as specified and directed. |
| 32 | D\" type, 150mmExtruded aluminium alloy handle fabricated type,complete all as specified and directed. |
| 33 | Aluminum alloy, anodized, sliding door bolt 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 34 | 300mm mild steelordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 35 | 25mm dia stainless steelcurtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 36 | Dismantling floor hearth or wall tiling including cementmortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 37 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbishall as specified & directed by Engineer-in-charge. |
| 38 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 39 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and even without using extra cement, complete all as specified and directed. |
| 40 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 41 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 42 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 43 | All as per serial item No 42 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4 |
| 44 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 45 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 46 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 47 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 48 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. |
| 49 | Removal of excavated material to distanceexceeding 250 metre but n.exc 500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 50 | HDPE double wall corrugated (DWC) pipes (ISI Marked) 150mm SN-8 class as per IS 16098 Part -II for non pressure underground drainage and sewage applications with speials including cost of special O rubber rings couplers etc, laid in trenches on concred bed to level / gradient, jointing with appropriate class fittings as per manufacturer\"s instructios including jointing accessories and fittings complete all as specified and directed. |
| 51 | Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - NOTE : (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 52 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed. |
| 53 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 54 | Plain cement concrete, type C-2, 1:3:6, using 40mm graded crushed stone aggregate as in bed to drainpipe including packing under pipes and haunchng against the side of pipe and testedafter the pipe are laid, complete all as specified and directed. |
| 55 | Demolition of reinforced cement concrete of any descriptionof any description and in any position not otherwise specifically provided for, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed. |
| 56 | pre-cast reinforced cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in cover slabs (for man holes etc), shafr cover at roof level, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesetc set in cement mortar 1:6,complete all as specified and directed. |
| 57 | Demolition of 25mm thick RCC louvers / jalli in shaft & other similar placeand removal of debris, including all necessary scaffolding and safety arrangementcomplete all as specified and directed. |
| 58 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 59 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 60 | Dubbing out average 20mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:4 complete all as specified and directed |
| 61 | Rendering 5mm thick in cement mortar 1:3on fair faces of concrete surfaces as in ceilings , finished fair and smooth, complete all as specified and directed. |
| 62 | Rendering 15mm thick in Cement and Sand mortar 1:4 overfair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified.Note : WPC shall be measured and paid separately. |
| 63 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 64 | Rendering 15mm thick in Cement and Sand mortar 1:6 over fair faces of brick/concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 65 | Complete removal of existing wall treatement (internal / external surface)upto & including 4 storey building complete all as specified and directed. |
| 66 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 67 | Preparing surface of wall and applying 15mm thick cement plaster in 1:4 cement sand mortar mixed with integral water proofing compound in wall surface including applying two coats of Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Asian paint, Pidilite and Bostic as per manufacturers inductionson wall surface (shaft area), upto 4 storey building including all necessary scaffolding and safety arrangement complete all as specified and directed. Note : Above coated rates are inclusive of liquid water proofing compound and epoxy rasin |
| 68 | Preparation of wall or similar surface by removing all loose material, clean by wire brush and water, applying two coats of damp proof component, sure seal (Dr Fixit) or equivalent as per manufacturer instruction and applying the component by brush 1.10kg/sqm for each coat, second coat transverse direction to first coat and after 4-6 hour drying of first coat, complete all as specified and directed. |
| 69 | Preparation of wall surfaces and applying two coats of distempering (smart periodical) with I st quality nano technology based nano water based premium acrylic interior emulsion paint with unique chemical composition of finest quality, as mentioned in manufacturer manual over a coat and including of a nano priming coat on prepared old surface of wall & ceiling with using roller complete all as specified and dircted by Engr-in-Charge. |
| 70 | Finishing walls with acrylic smooth exterior paint of required shade:Nanotechnology based Nano water based elastomeric finish Two Coats over one coat of water based elastomeric primer with super hydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of more than 300%, with VOC level less than 1%. 40 micron DFT of top coat cover & including 1mm thick acrylic wall care putty as mentioned in manufacturer manual over a coat ofexterior nano primerby using roller including preparation / levelling of old surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge.NOTE : Cost of necessary scaffolding, safety equipment and all other tool & material deemed to be included in quoted rate |
| 71 | Two coats of oil bound distemper on ceiling surfaces over a caot of primer including preparation of new plastered surfaces complete all as specified and directed |
| 72 | Complete removal of existing treatment on ceiling and preparation of old plastered or un-plastered surfaces of walls and applying two coats of oil bound, complete all as specified and directed. |
| 73 | Two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 74 | PVC (SWR) floor trap 100mm bore, plain with grating includingjointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed. |
| 75 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 76 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 77 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 78 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 79 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 80 | Towel rail 600mm long ofCP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 81 | Towel ring ofstainless steelfixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 82 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 83 | Taking up ordown steel tubingand connections 15mm bore, complete all as specified and directed. |
| 84 | Taking up ordown steel tubingand connections 20mm bore ,complete all as specified and directed. |
| 85 | Taking up ordown steel tubingand connections 25mm bore ,complete all as specified and directed. |
| 86 | Taking up ordown steel tubingand connections 50mm bore ,complete all as specified and directed. |
| 87 | Refixing of old steel tubing and connnections in new or old position (walls, ceiling floors etc) 25mm bore complete all as specified and directed. |
| 88 | 20 mm (outer dia) CPVC pipes,SDR 11 (surface / concealed) and Plain CPVC SDR 11fittings on walls / ceilingor laying in floors including brass elbow, \"T\" and all other necessary brass fittings like \"T\" bend & socket for fixing with GI tube/ tap/ stop cock/ mixer,including Cuttingchases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girth, in brick walls complete all as specified. |
| 89 | 25 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 90 | 50mm bore Galvanized Steel tubes, medium grade including all fittings forspout pipe over flow & waste pipe etc., complete all as specified and directed. |
| 91 | Bib tap brass, fancy type, long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 92 | Two way Bib tap brass, fancy type, (incl fixing arrangement of health faucet) long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 93 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 94 | Wall mixer system with L bend incl provn of over head shower, cast copper alloy , chromium plated screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 95 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 96 | Corner glass shelf 300mm of 3.5mm thick sheet glass chromium plated with brass brackets, guard and railing fixed as in repair complete all as specified and directed. |
| 97 | Cast copper alloy, chromium plated, fancy type shower rose with swivel joints 125mm dia including fixing to CPVC pipe 15mm bore, fixed as in repaircomplete all as specified and directed. |
| 98 | 25mm bore Union, brass to connect iron to polyethylene and fixed, fixed as in repairs complete all as specified and directed. |
| 99 | Taking down CI/PVC eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 100 | PVC(SWR)pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 fixed to wall, suspended to ceilingwith MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc,complete all as specified and directed. |
| 101 | PVC(SWR) rain water pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 laid in trenches or in floors etc, fixed as in repair complete all as specified and directed. |
| 102 | 110 mm bore PVC (SWR) of pressure 6 Kg/cm2, bends with acceess doorcomplete, fixed as in repair all as specified and directed. |
| 103 | 110mm borePVC (SWR) of pressure 6 Kg/cm2 junction single, (Single T) equal or unequal, with access door fixed as in repair complete all as specified and directed. |
| 104 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed as in repair complet all as specified and dircted. |
| 105 | PVC (SWR) \"P\" trap 110 mm, setting and jointing with solvent cement, fixed as in repair complet all as specified and dircted. |
| 106 | PVC (SWR) vent cowl 110 mm, setting and jointing with solvent cement, fixed as in repair complet all as specified and dircted. |
| 107 | Grinding, rubbing and polishing on existing marbled mosaic floor / kota stone floorcomplete all as specified and directed. |
| 108 | Plain cement mortar 1:3:6 (type C-2 using 20mm graded aggregate), 75mm thick as in Plinth protection , finishing cement concrete even and smooth without using extra cement,all as specified.Note: 10mm construction joint will be provided and panel should not be more than 3metre in length and joint filled with filler bitumen and sand in ratio (1:3) |
| 109 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
| 110 | Disconnecting existing tanks exc 500 and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified & directed by Engineer-in-charge. |
| 111 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 25mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 112 | Providing & fixing hangers of 6 mm dia. aluminium (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat of 40 x 3 mm size, 60mm long and expansion hold fasteners of 12.5mm dia, 40mm long with and including anodised aluminium snapgrid of size 605mm x 605mm, framed work for false ceiling with and including 4mm thick nonasbestos fibre cement building boardsfixed in aluminium framework with screws, including dismantling of ceiling complete all as specified and directed |
| 113 | Demolition of stone slabs and tiles of any description or thicknessin floors laid, bedded and pointed in any mortarincluding disposal of demolished materialcomplete all as specified and directed. |
| 114 | Kota Stone Slab flooring, 20-25mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 115 | All as per serial item No 114 hereinbefore but on steps/ tread/ riser/ skirting / vertical surfaces over and including 10mm screed layer in cement mortar 1:3, including cutting, rubbing, grinding and polishing complete, all as specified and directed. |
| 116 | 18-20mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte all as specified and directed. |
| 117 | Plate rack of stainless steel of size 610mmx 914mm x 254mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed. |
| 118 | 15mm thick rendering in Cement and Sand mortar 1:4 over roof slab finished even and fair mixed with water proofing compound @ 3% by weight of cementcomplete all as specified.Note : WPC shall be measured and paid separately. |
| 119 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface on roof slab / complete parapet height / top /15cm down on external wallas per standard practice and as per manufacturer instructionsincluding dismantling of existing felt /treatment, complete all as specified & directed. |
| 120 | Preparation of surfaces of any description over 10cm width or girth, not otherise described and applying two coats of bituminous aluminum paint @ 100gm/sqm on top of APP membrane complete all as specified and directed. |
