Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-02-2026 | CORRIGENDUM NO-03 | BOQ | 27-02-2026 |
| 2 | 14-02-2026 | RE REVISED CRITICAL DATES | Date | 27-02-2026 |
| 3 | 09-02-2026 | REVISED CRITICAL DATES | Date | 20-02-2026 |
| Sl. No. | Item Description |
| 1 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 3 | Taking down shutter and refixing in same opening after easying exc 1 sqm and n. exc 2 sqm each, complete in all respect as specified and directed. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed. |
| 5 | Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbingdown with water etc, complete in all respect as specified and directed. |
| 6 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (1:4), finished even & smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 7 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of of wall in cement mortar (1:6), finished even and smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 8 | M&L 10 mm thick plastering on brick/ stone/ concrete surfaces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 9 | M&L for brick work with sub-class \"B\" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar (CM) 1:6, including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 10 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 11 | S&F pressed steel door frame for doors with one or more rebates incl necessary fixing lugs , hinges ,lock strike plate , etc size 125x60 mm incl PCC filling all as specified and directed. |
| 12 | Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20 mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary formwork including dismantling of existing surface complete all as specified and directed. |
| 13 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 14 | Supply and fixed for glazed ceramic tiles 7 to 8 mm thick (square/rectangular) in vertical surface, area of each tile exceeding 0.06 sqm but not exc 0.16 sqm, set, jointed and pointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 15mm thick rendering in cement sand mortar 1:4 including dismantalling of existing tiles with screed bed/plastering complete in all respect as specified and directed. |
| 15 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, including dismantling of existing surface complete all as specified and directed. |
| 16 | M&L for 18-20 mm thick machine cut kota stone slab flooring of size not less than 500 x 500 mm over 20 mm thick cement mortar (CM) 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including dismantling of existing surface complete all as specified and directed. |
| 17 | Material and labour for Cleaning and preparation of roof/wall (RCC/BRICK/tiles/Cement cuncrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface ceused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane including taking of existing roof treatment and apply with following specifications:(a) Elongation of range 400% 600%(b) Tensile strength of 8-12 N/mm2.(c) Crack bridging ability of 3.00-4.00mm(d) Hardness (Shore \"A\" ASTM D2240) of range 50-70The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer Make- SIKA/FOSROC/AsianPaints/Berger.Note: The defect liability period of water proofing treatment shall be 10 years and the contractor shall beespor building(s) free From leakage/seepage for a period of completion. The contractor may obtain a similar guarantee by him for the purpose. 10 years after certified date of completion. the contractor may obtain a similar guarantee from the specialist firm engaged by him for purpose. |
| 18 | Taking down existing damaged IWC alongwith complete PCC and cement concrete from sunken floor and providing new IWC and seat cover and water proofing treatment to sunken floor as per following stages:-(a) 15 mm thick plastering in CM (1:3) with WPC at all around wall and base of sunken floor with proper slope.(b) Applying a coat of 85/25 gde hot bitumen @ 1.2Kg/ Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 50 micron, natural colour with cold cut back adhessive. (c) Fixing of 25mm dia GI pipe (mediumgrade) spout of length 45 cm. (d) Supply & fixing of vitreous china wash down water closet pan (pedestal pattern), white, seat cover and P or S type bend etc complete includingproviding cement concrete and cement filling (1:5:10) and 25 mm thick PCC 1:2:4 at top surface.. |
| 19 | S&F in repairs vitrious china squatting pan orissa pattern , size580x440 mm white , with integral foot rest ( Excluding flushing cistern and flushing pipe all as specified and directed by Engr - IN - Charge |
| 20 | S&F in repair PVC valveless, syphonic action type, low level dual flush cistern 10 ltr capacity, white, wtih inlet, ball valve, float and handle including brackets & flush pipe of polyethylene for low or high level cistern of required height of high density PVC, 32 mm dia pipe, complete in all respect as specified and directed. |
| 21 | Supply only water proofing compound complete, in all respect as specified and directed. |
| 22 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 23 | S&F 20 mm bore of tubes, \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 24 | S&F in repair 20 mm bore of Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete in all respect as specified and directed. |
| 25 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium \"U\" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 26 | S & F powder coated aluminium window and ventilator shutters, side hung type with/without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No) grade), powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 27 | S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mmincluding necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 28 | S&F mild steel work such as in guard bars, grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; and of similar type of work conforming to Fe 290, Gde-E-165complete allas specified and directed. |
| 29 | S&F 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 30 | S&F 100 mm size of mild steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 31 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed. |
| 32 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel haivng a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the M.S. frame weloded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete in all respcet as specified and directed. |
| 33 | S&F 35mm thick second class HW glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shuttrs as specified in SSR Part-I, section 8, clause 8.24 (a), complete in all respect as specified and directed. |
| 34 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete in all respect as specified and directed. |
| 35 | S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 36 | S&F 25 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers withlipping on both sides, complete in all respect as specified and directed. |
| 37 | S&F 35mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed. |
| 38 | S & F 18-19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including necessary leaping/edge margin of 3mm thick complete in all respect as specified and directed. |
| 39 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 40 | S&F Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 41 | S&F aluminium anodised sliding door bolts with hasp and staple (boilt type) 16 mm dia bolt, 250 mm long, with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate, complete in all respect as specified and directed |
| 42 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 43 | S&F PVC coloured insulated over MS pipe 20 mm dia curtain rod with fixing bracket, stops, rollers etc. complete all as specified and directed. |
| 44 | S&F 4 mm thick of size 600 mm x 450 mm bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete in all respect as specified and directed. |
| 45 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 46 | S & F mild steel sections (Beam, tee, angle, channel or flat sections) in rooftrusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc.including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality Acomplete in all respect as specifified and directed. |
| 47 | S&F PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed. |
| 48 | S & F in repair 15mm bore concealed long neck , CP finished stop valves, cast copper alloy, screwed down, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete in all respect as specified and directed. |
| 49 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm, complete in all respect as specified and directed. |
| 50 | S&F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete in all respect as specified and directed. |
| 51 | S&F in repairs long body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete in all respect as specified and directed. |
| 52 | S&F in repair for 15 mm bore pipe brass chromium plated (CP) shower rose 125 mm size, fixed to iron pipe, complete all as specified and directed. |
| 53 | S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 54 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 55 | S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed. |
| 56 | S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed. |
| 57 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints fixed to walls or laying in trenches 110 mm bore, complete in all respect as specified and directed. |
| 58 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints fixed to walls or laying in trenches 75 mm bore, complete in all respect as specified and directed. |
| 59 | S&F PVC (SWR) single (single \"T\") equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 60 | S&F PVC (SWR)single (single \"T\") equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 61 | S&F PVC (SWR) bends any radius 110 mm bore, complete in all respect as specified and directed. |
| 62 | S&F PVC (SWR) bends any radius 75 mm bore, complete in all respect as specified and directed. |
| 63 | S&F PVC (SWR) vent cowl 110 mm dia bore, complete in all respect as specified and directed. |
| 64 | S&F PVC (SWR) vent cowl 75 mm dia bore, complete in all respect as specified and directed. |
| 65 | Supply and fixed unplasticised PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 160mm outside diameter as per IS:13592-1992 including dismantling and breaking up existing drain pipes and fixing necessary mild steel pipe clamps complete in all respect as specified and directed. |
| 66 | Supply and fixed unplasticised PVC (SWR) bends any radius for160mm outside diameter of pipeas per IS:14735-1999 complete in all respect as specified and directed. |
| 67 | Supply and fixed unplasticised PVC (SWR) junction single, (single Tee) equal or unequalfor160mm outside diameter of pipe as per IS:14735-1999 complete in all respect as specified and directed. |
| 68 | Supply and fixed unplasticised PVC (SWR) Gully trap125/110 mm, setting and jointing with solvent cement complete in all respect as specified and directed. |
| 69 | M&L for precast RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respcet as specified and directed. |
| 70 | Providing and laying reinforced concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 1:2:4type B-1, (using 20 mm crushed and graded stone aggregate) complete in all respcet as specified and directed. |
| 71 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete in all respcet as specified and directed. |
| 72 | S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 73 | M&L for plinth protection or in foot path of 75 mm thick of cement concrete using type C-1, 1:3:6 (using 20 mm nominal size crushed and graded stone aggregate) in alternate penals and finished fair and even complete in all respect as specified and directed. |
| 74 | M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed. |
| 75 | M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers) wall care putty, complete in all respect as specified and directed. |
| 76 | M&L for preparation of old decorated plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface including complete removal of existig treatment, complete in all respect as specified and directed. |
| 77 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed. |
| 78 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed. |
| 79 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface, complete in all respect as specified and directed. |
| 80 | M&L for preparing of new undecorated wooden surface, of any description, not otherwise described, overe 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer, complete in all respect as specified and directed. |
| 81 | M&L for preparation of new undecorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 82 | M&L for preparing of old decorated wooden surface, of any description, not otherwise described, over 10 cm width or girth, and applying two coats of synthetic enamel paint, complete in all respect as specified and directed. |
| 83 | M&L for preparation of old decorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete in all respect as specified and directed. |
| 84 | Excavation in post holes each n.exc 0.50 cum, getting out, in soft/loose soil and removing surplus soil to a distance n.exc 50m and making good surfaces. |
| 85 | M&L for PCC type B-2, 1:2:4 (using 40 mm nominal size crushed and graded stone aggregate) in foundations, filling and mass concrete for post holes, complete in all respect as specified and directed. |
| 86 | S&F mild steel sections joist, channel, angle, ortee section, fixed independent, without connecting pates, etc (cut to lienghs i.e. within 20 mm of the lenght indicated) etc. using FE-410W (Grade E-250 quality \"A\") complete in all respect as specified and directed. |
| 87 | S&F mild steel sections, framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fidxing of steel sheeting or other covering. doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittngs (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc. using FE-410W (Grade E-250 quality \"A\") complete in all respect as specified and directed. |
| 88 | M&L for 20mm thick Granite(of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 89 | S&F for chain link fencing MS galvanizedany size or typemesh fixed to RCC post including securing or tying with GI MS wire staples, ms section, bars etc, complete in all respect as specified and directed. |
| 90 | S&F mild steel screws bolts 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or scrwed both ends, each screwed end to be fitted with washers and hexagonal or square exc 5 cm and not exc 10 cm long compelte in all respect as specified and directed. |
| 91 | M&L for formwork to sides of pillars, posts, columns, and similar works of rough finished surfaces complete all as specified and directed |
| 92 | S & F coloured 0.50mm thick pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheethaving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material complete in all respect as specifified and directed. |
| 93 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete all as specified and directed. |
| 94 | Providing and laying M-25 design mix (using 20mm nominal size crushed and graded stone aggregate)for reinforced cement concreteFoundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc.; complete in all respect as specifified and directed. |
| 95 | Providing and laying M-25 design mix (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed. |
| 96 | M & L brick work with sub-class \"B\" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radiusbuilt in CM (1:6) complete in all respect as specified and directed |
| 97 | M & L for Broken stone orboulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed |
| 98 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed. |
| 99 | M & L for filling with approved earth obtained from out side of MoD land including raising (or lowering) earth, spreading in layers n. exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc. n. exc. 2.0m high from base complete in all respect as specified and directed. |
| 100 | Preparaing new un decorated plastered or unplastered surface of wall and apply three coats of white wash complete in all respect as specified and directed. |
| 101 | S&F in repair galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to fencing post including securing or tying at crossings with provn of steel pins etc as directed (Each line wire shall be measured) complete all as specified and directed. |
| 102 | S & F for coloured rubber moulded, glazed pre coated chequered cement concrete tiles of any shape and size 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over 15mm thick screed bed in CM 1:4 complete in all respect as specified and directed. Sample as approved by GE. |
| 103 | M&L for mild steel TMT bars 5mm dia and over upto and including 10 mm dia cut to length, bent to shape and binding with MS wire (annealed) not less than 0.90 mm dia as in stirrups, nibs etc complete as directed. |
| 104 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 105 | M&L for 25 mm thick of cement concreteflooring using type B 0, 1:2:4 (using 12.5 mm nominal size crushed and graded stone aggregate) and finished fair and even without using extra cement, complete in all respect as specified and directed. |
| 106 | Providing & laying heavy duty non skid coloured digital printed floor tiles of size 300mmX300mm ,8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. make-somany(heavy duty),johnson (Endura), Orient Bell(Pavers) |
| 107 | S &F second class hardwood plain,solid ,straight,chowkats and frames,wrought, framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, complete in all respect as specified and directed. |
| 108 | M & L for anodised aluminium grill for doors, windows, ventilators including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 109 | S&F Mortice lock,vertical type, size 100 mm made of Aluminium with 2 levers complete all as specified and directed. |
| 110 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. |
| 111 | M & L for coloured ceramic tiles 8 to 10 mm thick (square/ rectangular) area of eachtile exceeding 0.18 Sqm but not exceeding 0.72 Sqm, in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 112 | S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 113 | S & F of powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in ewach door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 114 | S&F aluminiu door floor spring,Suitable for left-right opening & single-door,double door two direction opening, 90° hold open, Suitable for the size of door 950 x 2100mm complete all as specified and directed. |
| 115 | S & F 12 mm thick plywood boards, grade BWP, type BB fixed with screws to timber frame work for wall Panelling framing complete in all respect as specified and directed |
| 116 | S&F solid PVC wall lining cosisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, complete in all respect as specified and directed. |
| 117 | S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing., complete in all respect as specified and directed. |
| 118 | S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 119 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete in all respect as specified and directed. |
| 120 | S&F in repair Counter Top Basin, Size: 600x400x185 mm including Waste coupling 32 mm SS and Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange ,complete in all respect as specified and directed. |
| 121 | S&F in repair Single unit (single piece) wash down water closet panwhite including plastic water closet seat cover white, Single unit with flat bottom, new CI/UPVC \"P\" or \"S\" type trap and mild steel chromium plated hinging devicecomplete in all respect as specified and directed |
| 122 | M&L for coloured vitrified ceramic tiles, light shade 10 mm thick in floor, area of tile Exc 0.42Sqm but not exc 1.0 sqm each set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15 mm in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 123 | S&F in repair Two way bib cock with Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 124 | S&F in repair Exposed Part Kit of Single Lever Hi Flow In-wall Diverter (Compatible In-wall part ALD-079N is sold separately) complete in all respect as specified and directed. |
| 125 | S&F in repair Alive Maze Hand Shower 68x100mm Round Edge & Rectangular Head Single Flow(Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System complete in all respect as specified and directed. |
| 126 | S&F in repairPremium Wall Bracket For Hand Shower, ø35mm & 100mm Long Round Shape complete in all respect as specified and directed. |
| 127 | S&F in Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Compatible with ALD-233N & ALD-235N) complete in all respect as specified and directed. |
| 128 | S&F in Concealed Body for Single Lever Basin Mixer Wall Mounted, But without Exposed Parts complete in all respect as specified and directed. |
| 129 | S&F in repair Bathtub Spout with Button Attachment For Hand Shower With Wall Flange complete in all respect as specified and directed. |
| 130 | S & F 5.50 mm thick ofbevelled edge mirror of selected quality decorative type designer mirror with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 131 | S&F in repair Flexible Tube 8mm dia & 1.5M Long with Nuts complete in all respect as specified and directed. Make:- Jaquar complete all as specified and directed. |
| 132 | M/L Plain Cement Concrete Type B-2 1:2:4 (using 40 mm gradedstone aggregate) 100mm thick making finish even and fair without using extra cement.complete in all respect as specified and directed. |
| 133 | Supply, laying, jointing and testing in replacementLT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core complete in all respect as specified and directed. |
| 134 | Supply, laying, jointing and testing in replacement LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm, 3.5 core complete all as specified and directed. |
| 135 | Supply, install, testing & commissioning of LTbusbar chamber of size (0.60x0.60x1.0)m CPRI approved, outdoor type, factory made fabircated to CRCA sheet of 3.15mm thickness, angle iron of size 50X50X6mm thick of length 0.6 m from pcc, frame work and tee section (frame) of suitable sizedouble door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, Al bus bar chamber (enclosed) incl rust free spray painting with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold, nuts and washer and makingcomplete including PCC foundationcomprising of followingaccessories:- BUS-BAR & INTERNAL CONNECTIONS:The bus-bars shall be made up of 04 Nos Aluminium 400 A rated not less than 40mmx10 mm, duly insulated with 1100 V grade standard colour coded PVC sleeves INSTRUMENTATION SYSTEM :(a)Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 01 Set.(b)3 Ph Digital Voltmeter CI 1.0 - 01 No(c ) MCCB 160Amp 4P -01Nos(d) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 01 Nos.NOTE : 1) Design / Drawing / BOM of the LT Busbar panel board showing the dimensions incl accessories is to be obtained from panel board manufacturer / supplier & is to be got approved from GE before placing final order to the manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. |
| 136 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soilcomplete all as specified and directed. |
| 137 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 138 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 139 | Supply and laying in trenches brick common burnt clay building brick, subclass \"B\" designated- 75 with width equal to length of brick for cable protection complete in all respect as specified and directed. |
| 140 | Supplying & fixing to walls and ceilings or laid in floors 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 141 | S & F 25 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete all as specified and directed. |
| 142 | M&L for Cutting galvanised mild steel pipe of nominal bore 50 mm or 80 mm for alterations or additions (each cut measured) complete all as specified and as directed. |
| 143 | M & Lfor point wiring with 1.5 sqmmFRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade (MMS ISI) of size not less than 20 mm dia(or as site requirement) concealed in wall/over ceiling, pressed steel concealed terminal boxes of required sizecomplete with all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor light / fan/ bell point controlled by one switch including taking down existing point wirin complete all as specified and directed.Note:- (i) Cost of PVC conduit, steel terminal boxes,modular fixtures for mounting modular switches, cover plates etc, are deemed to be included in the quoted rate.(ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc, are deemed to be included in the quoted rate. |
| 144 | All as per item 142 above but for One 3 pin socket outlet 5 Amps on same board complete all as specified and directed. |
| 145 | All as per item 142 above but for One 3 pin switch socket combination 5 Amps on indpendent board complete all as specified and directed. |
| 146 | All as per item No.142 above but with 2.5 sqmm single core multistranded copper conductor FRLSH cable for 3/5 pin 15 Amp socket outlet on independent board complete all as specified and directed. |
| 147 | S & F in replacement Modular switch 1 way 10 A 1 module module complete all as specified and directed. |
| 148 | S & F in replacement Modular switch 1 way 16 Amp SP,1 module complete all as specified and directed. |
| 149 | S & F in replacement Modular Fan step regulator, 120W - 2 module complete all as directed. |
| 150 | S & F in replacement Modular Socket 6 A 2/3 pin combined 2 module complete all as directed. |
| 151 | S & F in replacement Modular Socket 6 A /16 A-2/3 pincombined 2 modulecomplete all as directed. |
| 152 | S & F in replacement of modular bell push switch 5 Amps complete all as specified and directed. |
| 153 | S & F in replacement of call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed. |
| 154 | S & F in replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 155 | S & Fin replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed |
| 156 | M & L in repair/replacements path light LED bollard 10w in cylindrical shape with opal acrylic diffuser and IP 65 & IK-10 protection with silent observer and giving light diffuser at the upper portion acts a beacon of path guidance in a landscape environment fixed on PCC block 1:4:8 type D2 40mm grade all as specified and directed. |
| 157 | S & F in replacement LED bulb of 10W with Lumen output 950 lm and Colour Temp 6500K B22 type fitted suitable for PVC /Poly Carbonate type complete all as specfied and directed. |
| 158 | M&L for replacement of main circuit ofBLDC ceilingfan 1200/1400 mm sweep make as per site after taking down unserviceable coils and refixing the same after repair and testing complete all as specified and directed. |
| 159 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) In Replacement Of Old Fans.Old Fans Will be Credited to AGE E/M complete all as directed. |
| 160 | Supply & Laying in replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sq. mm,2 core complete all as specified and directed. |
| 161 | M&L for rewinding of exhaustfan 280 to 450 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying ,painting etc complete and refixing the same after rewinding and testing complete all as specified and directed. |
| 162 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 163 | S&F in replacement LED Tube light luminaires, 20-22 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable offrom connector and ceiling rose, complete all as specified and directed. |
| 164 | M&L for submain wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduitincluding 6 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 165 | M&L for submain wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduitincluding 4 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 166 | S & F sheet metal enclosure double doorfor MCB DBs TPN 4 way 415 V, complete flush mounted /concealed in wall all as specified and as directed. |
| 167 | S & F sheet metal enclosure double doorfor MCB DBs SPN 12 way 240 V, complete flush mounted all as specified and as directed. |
| 168 | S & F sheet metal enclosure double doorfor MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed. |
| 169 | S & F in replacement new generation energy saving and environmental friendly long life 35W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07including necessary brackets (made out of suitable bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed.. |
| 170 | S & Fsingle pole and neutral enclouser with atwo pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 171 | Supply and fixing 16 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole(SP) in the MCB DB complete with connection testing and commissioning complete in all respect as specified and directed. |
| 172 | S & F MCB Single pole & neutral (SPN)32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 173 | S & F MCB Tringle pole & neutral (TPN)63 Amps, 415 volts , C Curve, AC , 16 kA complete all as specified and directed. |
| 174 | M&L for earthing complete with GI pipe 40mm dia as earth electrode buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the pipe not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
