Tender For Provision Of Construction Of Four Guard Rooms Along With Toilets Cum Bathrooms , Repair Bay, 2 X Inspection Pits, Tools And Mt Stores, Paint Store And Fol Store Covered Under Various Lbw Works Under Ge ( North) Bathinda At Bathinda Mil. Stn., Bathinda-Punjab

TDR : 53658167

Tender Notice
BOQ

21 Days Left

Bathinda , Punjab

Tender Brief : Tender For Provision Of Construction Of Four Guard Rooms Along With Toilets Cum Bathrooms , Repair Bay, 2 X Inspection Pits, Tools And Mt Stores, Paint Store And Fol Store Covered Under Various Lbw Works Under Ge ( North) Bathinda At Bathinda Mil. Stn.

Document Fees
₹ 1000 /-

EMD
₹ 195000.0 /-

Tender Value
₹ 1.19 Crore /-

Submission Date
17-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Surface dressing not exceeding 15 cm deepand getting out in soft / loose soil complete all as specified and as directed by Engineer-in-Charge.
2	Removing excavated material (soil ) exc. 1.50 km but notexceeding 5 km and depositing where directed complete all as specified and as directed by Engineer -in-charge.
3	Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation etc or for shafts , wells, cesspits,manholes , septic tank, for laying of cables , laying of pipesnot exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specifiedand as directed by Engineer-in- charge.
4	Material and labour forCement Concrete 1:4:8 , Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concretecomplete all as specified and as directed by Engineer-in-charge.
5	Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-charge.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
6	Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-charge.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
7	Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed by Engineer-in-charge.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
8	Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likecomplete all as specified and as directed by Engineer-in-charge.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
9	Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in Chajjas complete all as specified and as directed by Engineer-in-charge.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
10	Material and Labour for Formworkof sides of concrete foundations, Footings, Bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finishedflatsurfaces of concretecomplete all as specified and as directed by Engineer-in-charge.
11	Material and Labour for Formwork in square,reactangularor polygonal onrough finished surface of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in-charge.
12	Material and labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
13	Material and labour for Formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding200 mm thick (horizontal or sloping) on rough finished flatsurfaces of concrete complete all as specified and as directed by Engineer-in-charge.
14	Material and Labour for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail ings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20cm wideon rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
15	Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etccomplete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
16	Material and labour for mild steel TMT bars 6mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etccomplete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
17	Material and labour for Mild steel TMTbars 5mm dia and over upto and including 10mm dia in stirrups, spacersand binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips directed by Engineer-in-charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
18	Material and labour for Brick work withfly ash old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.
19	Material and labourfor Brick work withfly ash old size bricks, straight or curved on plan to any radius in half brick walls built in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
20	Removingexcavated material as inallkind of Soilsnot exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifiedand as directed by Engineer-in- charge.
21	Returning filling in any type ofsoil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specifiedand as directed by Engineer-in- charge.
22	Material and Labour forSand filling under floor or in foundation including spreading levelling, watering and well ramming in layers not exc 25 cmetc complete allas specified andas directed by Engineer-in- charge. Note: Sand shall be approved by GE.
23	Material and Labour for Hard core using broken stone aggregate of gauge not exc. 63mm, deposited spread and leveled in layers not exc. 150 mm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in- charge.
24	Material and labour for 100 mm thickcement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
25	Material and labour for 75 mm thickcement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
26	Material and Labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.
27	Material and labourfor 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces even and smoothwithout using extra cement complete all as specified and as directed by Engineer-in-charge.
28	Material and labourfor 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing fair & even mixed with Liquid water proofing compound as per manufacturer\"s instructions but without using extra cement complete all as specified and as directed by Engineer-in-charge.Note :-Liquid water proofing compoundshall be measured and paid separately.
29	Supply only Liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.
30	Material and labour for rendering 5 mm thick in cement mortar in 1:3on ceiling/ Chajja and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
31	Material and Labour for applying acrylic wall care putty oninternal surfacesand external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etccomplete all as specified and directed by Engineer-in- Charge.Make of acrylic wall carePutty : AS descriped inLIST OF MAKES/MANUFACTURERS under Appendix \"B\" here-in-after.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
32	Material and Labour for Preparation of surfaces and applying 02 coats of Interior Acrylic Emulsion Paint (light shade as approved by GE ) @ 10.00 Sq.m/ litre / 2.00 coats by using roller/brush to wall surfaces over with and including one coat of Interior Acrylic Emulsion Primer @ 10.00 Sq.m / litre / 1.00 coat as recommended for under coat by manufacturer of Interior Acrylic Emulsion by using thebrands of Interior Acrylic Emulsion Paint and Interior Acrylic Emulsion Primer as descriped inLIST OF MAKES/MANUFACTURERS under Appendix \"B\" here-in-aftercomplete all as specified and directed by Engineer-in- Charge.
33	Material and Labour for Preparation of surfaces and applying 02 coats of Exterior AcrylicEmulsion Paint ( shade as approved by GE) with highlighter of any approved shade,@ 5.00 Sq.m / litre / 2.00 coats by using roller to External walls / RCC surfaces / Soffits of Chajjas / Roof projections / Cantilevers / Balcony etc. surfaces over with and including one coat of Exterior Acrylic Emulsion Primer @ 11.00 Sq.m / litre / 1.00 coat as recommended for under coat by manufacturer of Exterior Acrylic Emulsion by using the brands ofExterior Acrylic Emulsion Paint and Exterior Acrylic Emulsion Primer as descriped inLIST OF MAKES/MANUFACTURERS under Appendix \"B\" here-in-aftercomplete all as specified and directed by Engineer-in- Charge.
34	Material and Labour forfor preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before usecomplete all as specified and directed by Engineer-in- Charge.
35	Supply & FixingFactory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mmcomprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximumtoxcity index of 12 for 100 gms )fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmmmodulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A categorywith property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fastlugs / SS Dash Fastner of required dia and lengthwith and including Supply and Fixing(03 Nos Per Frame ) 100 mm long SS Butt Hingescomplete all as specified and asdirected by Engineer-in- charge.
36	Supply & FixingFactory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 125 mmcomprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximumtoxcity index of 12 for 100 gms )fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmmmodulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A categorywith property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fastlugs / SS Dash Fastner of required dia and lengthwith and including Supply and Fixing(03 Nos Per Frame ) 100 mm long SS Butt Hingescomplete all as specified and asdirected by Engineer-in- charge.
37	Supply & FixingFactory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and includingSupply & Fixingof 02 Nos (per Leaf) SS 150mm long Tower Bolt,Supply & Fixingof 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixingof 02 Nos (per Leaf) Stainless Steel 150mm long handlecomplete all specified and directed by Engineer -in-charge.
38	Supply & FixingFactory Made 30mm thickSolid WPC ( Wood polymer Composite ) WiremeshDoor Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspensionrade ),calcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cum, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category withProperty of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum14 microns thick of approved design pastedon both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together onpanel area of door except stiles and rails to be panelled with and includingmesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steelbutt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01 No. of helical door spring of 300 mm length complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the itemsand authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steelbutt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item..3. The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account.
39	Supply and fixing offactory made uPVC white colour Three track Slider Window including glass & mesh of area exceeding 1.00 Sqmand not exceeding 2.00 sqm each window made of extruded profiles of high impact modified grade manufactured from Tropicalized Blend with TiO2 and required additives, colorfast & being able to withsatand a weather resistance test of 16000 hrs on weathering apparatus, resistant to chemicals, and be fungal and vermin proof. The uPVC profile should be classed as self extinguishing to prevent support or enchancement of accidental fires. Extruded profile duly reiniforced with minimum 120 gsm zinc coated GI of 1.5mm to 2.5mm thickness to meet the wind load requirement on sash/mulilion and fitted in continuous length in closed chamber of required length (shape and size according to uPVC profile design). The internal drainage shall be isolated from chambers into which reinforcement can be placed or through which frame fixing passes. Drainage shall be either through the base or alternatively to the face, concealed by face drainage caps. uPVC systems must be fabricated with fusion welded corners and uPVC extruded glazing beads of appropriate dimensions with EPDM/TPE Gaskets. All hardware fitted must be of stainless steel, multipoint espag, plastic packers, plastic caps & necessary stainless steel screws, except handles to be of Zinc/Al alloy casted with powder coated, GI fasteners 100mm x 8mm size for fixing frame to wall. Outer frame of windows 118mm x 50mm , sash 45mm x 60mm consisting of multi chambered frame, sash 7 mullion/transom (wherever required), The sizes of the sections indicated are minimum and no additional cost shall be claimed for use of higher sections due to design considerations. The wall thickness of the profile shall be minimum 2.0 ± 0.2mm. The sheet glass shall be toughened of thickness 5mm. The wire mesh shall be of stainless steel stainless0.36mm nominal dia of wire and average width of aperature 1.40 mm.After fixing the frame the gap between the frame and adjacent finished wall shall apply Silicon sealant to make joint, water proof of approved quality. There would be a conditional warranty of minimum 10 years on profile & 02 years on hardware from the date of completion. The uPVC system must be installed by profile manufacturer or their authorised agents only complete all as specified and asdirected by Engineer-in- charge.(Note :- The rate of 5mm thick toughened glass forglazing and stainless steel wire mesh cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mmisincluded in this item and nothing shall be paid extra on this account. Net opening will be measured for payment purpose.)
40	Supplyand fixing offactory made uPVC white colour Louvered Casement Window of area not exceeding 1.00 Sqm each window made of extruded profiles of high impact modified grade manufactured from Tropicalized Blend with TiO2 and required additives, colorfast & being able to withsatand a weather resistance test of 16000 hrs on weathering apparatus, resistant to chemicals, and be fungal and vermin proof. The uPVC profile should be classed as self extinguishing to prevent support or enchancement of accidental fires. Extruded profile duly reiniforced with minimum 120 gsm zinc coated GI of 1.5m to 2.5mm thickness to meet the wind load requirement on sash/mulilion and fitted in continuous length in closed chamber of required length (shape and size according to uPVC profile design). The internal drainage shall be isolated from chambers into which reinforcement can be placed or through which frame fixing passes. Drainage shall be either through the base or alternatively to the face, concealed by face drainage caps. uPVC systems must be fabricated with fusion welded corners and uPVC extruded glazing beads of appropriate dimensions with EPDM/TPE Gaskets. All hardware fitted must be of stainless steel, multipoint espag, plastic packers, plastic caps & necessary stainless steel screws, except handles to be of Zinc/Al alloy casted with powder coated, GI fasteners 100mm x 8mm size for fixing frame to wall. Outer frame of windows 45mm x 50mm , with fixed frosted glass in the lower half, 4mm thk glass pinhead louvers in the upper half and Mesh consisting of multi chambered frame, sash & mullion/transom (wherever required), The sizes of the sections indicated are minimum and no additional cost shall be claimed for use of higher sections due to design considerations. The profile of the frame shall be suitable to install and fix mild steel guard bars. The wall thickness of theprofile shall be minimum 1.8 to 2.3 ± 0.2mm. The sheet glass shall be toughened of thickness 5mm. The wire mesh shall be of stainless steel stainless0.36mm nominal dia of wire and average width of aperature 1.40 mm.After fixing the frame the gap between the frame and adjacent finished wall shall apply Silicon sealant to make joint, water proof of approved quality. There would be a conditional warranty of minimum 10 years on profile & 02 years on hardware from the date of completion. The uPVC system must be installed by profile manufacturer or their authorised agents only complete all as specified and asdirected by Engineer-in- charge.(Note :- The rate of 5mm thick toughened glass forglazing, 4mm thick pinhead glass and stainless steel wire mesh cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mmisincluded in this item and nothing shall be paid extra on this account. Net opening will be measured for payment purpose.)
41	Material and Labour for 75 mm thick PCC 1:3:6 ,Type C-1 using 20 mm graded stone aggregate as in plinth protection,finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
42	Supply only chain link mild steel galvanised fencing (mesh size 100 mm x 100 mm of 10 gauge wire) complete all as specified and as directed by Engineer-in-charge. .Note : The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly. BOO duly counter signed by GE shall be enclosed with final bill.
43	Supply & Fixing sheet glass 5.00 mm thick tinted quality and glazing complete all as specified and directed by Engineer-in-Charge.
44	Supply & FixingMild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
45	Supply & Fixingstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire staple complete all as specified and as directed by Engineer-in-charge.
46	Material and Labour for anti-skid premium(1st) quality coloured ceramictiles 400 X 400 mm and 7-8 mm thick,, in floors etc with andincluding 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile includingnecessary cutting as per site requirementcomplete all as specified and as directed by Engineer-in-charge.
47	Material and Labour forproviding and layingPremium (1st quality)straight edge,Stain free, glooss finish, Square marbonite Double charged vitrified tiles sizein 600mm x 600mm x 9mm to 10mm thick asin floors etc. shade asapproved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
48	Material and Labour forproviding and layingPremium (1st quality)straight edge,Stain free, glooss finish, Square Double charge vitrified tiles sizein 600mm x 600mm x 9mm to 10mm thick asin skirting surfaces shade asapproved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
49	Material and Labour forglazed ceramic coloured tiles7.5 mm to 8.5mm thick 450mm x 300mm size in verticle surface with andincluding 10mm thick backing coat using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge.
50	Supply and Fixing 16 mm bore CPVC pipe SDR 11 with and including CPVC SDR 11 fittingsand fixed to walls & ceilings or laid in floors, complete complete all as specified and as directed by Engineer-in-charge
51	Supply and Fixing 20 mm bore CPVC pipe SDR 11 with and including CPVC SDR 11 fittingsand fixed to walls & ceilings or laid in floors, complete complete all as specified and as directed by Engineer-in-charge
52	Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specifiedand as directed by Engineer-in- charge.
53	Supply and Fixing 15mm bore, brass Chromium Plated single livercentral hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in- charge.
54	Supply and fixingBrass Chromium Plated wall mixer for mixing hot & cold water screwed down, screwed for 15mm bore pipe or for brass ferrulecomplete all as specified and as directed by Engineer-in-charge.
55	Supply and fixing15mm borebib tap, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and as directed by Engineer-in-charge.
56	Supply and fixing 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type)cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
57	Supply and fixingAngular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified & directed by Engineer-in-charge.
58	Supply and fixing32/40mm size waste fittings, brass, CP, for glazed ware sinks, basins etc. with long flange end embedded in red lead cement and other end fixedcomplete all as specified & directed by Engineer-in-charge.
59	Material and Labour for Oval type vitreous china Wash Hand Basin, white,Size of 550mm x 460mm ,with and including 32mm chromium plated waste coupling and PVC bottle trap andfixing in marble slabcomplete all as specified and approved by GE / directed by Engr-in-Charge. Note: marble slab shall be measured and paid separately.
60	Material and Labour forvitreous china wash down water closet pan wall hanging single piece (with and including flushing cistern EWC) \"P\" trap, with andincluding white coloured closed pattern plastic seat cover, hand faucet , with and including mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
61	Material and Labour for Concealed in wall PVCflushing cistern of10 Litrecapacitywith dual flushing system, valveless syphonic action type, with and includinginlet/outlet, ball valve, float and with and including brackets and connection to pipe etc., withand including all necessary accessories,installation kit and \"S\" type drain pipe connetion set for wall hung WC etc. as recommended by manufacturer for fixing, packing , with and includingactuator knobs,flush platescomplete all as per manufacturer\"s instructions in all respect complete all as specified and as directed by Engineer-in-charge.
62	Supply & fixing chromium plated square shower rose 200mm x 200mm size, with or without swivel joints, any size, including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and as directed by Engineer-in-charge.
63	Supply & fixing PVC connections 15mm size with brassnuts of length 450mm complete all as specified and as directed by Engineer-in-charge.
64	Supply & fixing PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and as directed by Engineer-in-charge.
65	Supply & fixingRotational MouldedPolyethylene water storage tankISI Marked of capacity 1000 litres (cylindrical vertical, with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule \"A\" BoQ.)
66	Supply and FixingBall valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
67	Supply & fixingGun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
68	Supply & fixing stainless steel AISI-304 cock roach trap gratingsof size 150mm x 150mm square in shape with 5mm border complete in all respect all as specified.
69	Supply and fixingbevelled edge mirror selected quality 5mm thick glass mounted and fixed to with chromium plated brass screws and cup washers, with andincluding PVC frame around made of PVC channel, complete all as specified and directed by Engineer-in-Charge.
70	Supply and fixingsheet glass shelf assembly consisting of 5.5 to 6mm thick glass shelf 12 cm wide and 450mm long with bevelled edges/hatching of edges fixed with stainless steel\"D\" bracket fixed and railing complete all as specified.
71	Supply and fixingsheet glass shelf assembly of 300mm x 300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel\"D\" bracket fixed and railing complete all as specified.
72	Supply and fixingpeg set / coat hooks (set of six hooks) made ofstainless steel complete all as specified and as directed by Engineer-in- charge. .
73	Supply and fixing chromium plated brass towel rail, 20mm dia, D type, 60cm long fixed to wallcomplete all as specified and as directed by Engineer-in- charge.
74	Material and Labourfor Vitreous China Urinal, Half stall type, white, including connections to flushing pipe and outgoing pipes , including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating, with andincluding CP urinal spreader , with and including 32mm bore PVC waste pipe complete all as specified and directed by Engineer-in- charge.
75	Material and labour for Green Marble as approved by GE, 20mm thick machine cut,(table rubbed and polished)for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partitionand like , with andincluding screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement(1:2)using marble dust with admiture of pigmentto matchwith shade ofmarble slabd complete all as specified and as directed by Engineer-in-Charge.
76	Supply & fixing110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any lengthfixed with clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from wallscomplete all as specified and as directed by Engineer-in- charge
77	Supply & fixing 75 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length fixed with clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from wallscomplete all as specified and as directed by Engineer-in- charge
78	Material & Labour for 75 mm diaPVC (SWR) floor trap type B , plain with grating including jointing with solvent complete all as specified and directed by Engineer-in-Charge.
79	Material and Labour for Water proofing tratment to roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:(a)Preparation ofsubstrate and cleaning it off all loose and triable by mechanical means(b)Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.(e)The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f)The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Note : Complete material shall be approved by GE andprocured in bulk and kept in lock and key.Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.
80	Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule \"A\" BoQ.
81	Material and labour forcement slurry @ 1.2 kg /sqmspreading with bristle brush with and includingrendering 15 mm (average thickness)in cement mortar 1:3 finished even and fairmixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid water proofing comound shall be measured and paid seperately as supply only in appropriate item of schedule \"A\" BoQ.
82	Material and Labour for Making benching with PCC 1:2:4 type- B0,using 12.5mm graded stone aggregates using withLiquid Water Proof compoundas per manufacturer\"s instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note :Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule \"A\" BoQ.
83	Material and labour for10 users 2000 ltrs capacity PVC moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favourable conditions, process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet- outlet short circuit of waste water which is prevented to ensure long and enough retention time for effective treatment, thus the effluent dose not contain any solid or scum that could clog up the pipe line.The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludge). The liquid wastes are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment, process is known as primary treatmentcertain bacterias and viruses are adsorbed into solid particles and held in the sludge or scum layers, allowing for limited removal of disease causing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use including 150mm thick PCC 1:4:8 Type B-1, using 20mm graded stone aggregates below foundation and vent shaft connection, including excavation, returning and filling, removal of excess soil, connection to existing sewage line including site clearance etc.complete all as specified and directed by Engineer-in- charge.
84	Supply , fixing and Testing PVCManhole of Polyethylene Material(PE) ,Manhole Baseof size 800 mm diawith and including 3 Nos.inletand 3 Nos. outletof required sizecomplete all as per manufacturer\"s instructions and complete all as specified and directed by Engineer-in-charge.
85	Excavation over areas , not exceeding 1.5 mtr deepand getting out in soft/loose soil complete all as specified and directed by Engineer-in charge.
86	Exacavation of areas, exceeding 1.5 mtr and not exceeding 3.0 mtr deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in charge.
87	Exacavation of areas ,exceeding 3.0 mtr and not exceeding 4.5 mtr deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in charge.
88	Material and Labour for Hard core using broken bricks of gauge not exc. 63mm, deposited spread and leveled in layers not exc. 150 mm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in- charge.
89	Material and Labourfor loose filling with broken bricksof gauge 80 to 150mm in sokage pits, sokage wells complete all as specified and directed by Engineer-in charge.
90	Supply& FixingMild Steel Rungs of 20mm dia bar all as specified and directed by Engineer-in-charge
91	Supply and Fixing and testing 100mm bore Sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors Complete all as specified and as directed by Engr-In-Charge.Note: Excavation and earth work shall be measured and paid seperately under appropriate items of Schedule \"A\" BoQ.
92	Supply and Fixing and testing100mm bore Sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wallsComplete all as specified and as directed by Engr-In-Charge.
93	Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed for DWCPE pipes of 150 mm bore, laid to required slope including packing under and haunchingagainst the sides of pipes after they are laid and tested including form work complete all as specified and as directed by Engineer-in-charge. Note :-(i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.(iii)Excavation , earth work , returning filling shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ.
94	Supply , Fixingand testing for providing ,lowering , laying DWCPE (SN 8)pipe of150mm internal boreas per IS-16098 of 2013,laid in trenchand jointed with and including elastomeric sealing \"O\" ring and fittings complete allas per manufacturer\"s instructions ,complete all as speified and as directed by Engineer-in-charge.Note:- Excavation , earth work, returning filling , removal ,bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch \"A\"
95	Material and labourfor Damp proof course40 mm thick cement concrete (1:1.5:3) type B-0, using graded stone aggregate mixed with water proofing compound as per manufacturer’s instructions , over with and includingapplying one coat of cold applied bituminous primer @ 0.70 litre per sq. m, over with and including blown bitumen grade 85/25 @ 1.20 kg/Sq. m surfaces including necessary formwork complete all as specified and as directed by Engineer-in-charge. Note : Ther rate of blown bitumen grade 85/25 @ 1.20 kg/Sq. m ,bituminous primer @ 0.70 litre per sq. m is included in this item and nothing shall be paid extra on this account.
96	Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttressese measured and paid for separately under appropriate item of this schedule.
97	Material and labour forFormwork to faces of walls, retaining walls, abutments,parapets and staircase railingsand similar work including attached pillasters, buttresses, etc.; vertical or to batter on rough finishedflatsurfaces of concretecomplete all as specified and as directed by Engineer-in-charge.
98	Material and labourfor 15mm thick rendering in CM (1:6) (internal surface) on other thanfair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge.
99	Material and Labour rendering 10 mm thick on concrete surface in concrete surfaces in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.
100	Material and Labourfor 15 mm thick rendering in CM 1:3 mixing with WPC @ 200 ml per bag of cement on fair faces of concrete surfaces on roof slab after wire brushing and cleaning top surface complete all as specified and as directed.(WPC shall be measured separately)
101	Material and Labour for morrum/red bajri filling in floors or pavings, laid in layers not .exceeding 15cm thick, spread,levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.
102	Material and labour for cement concrete flooring 25 mm thick levelling course PCC 1:2:4 type B-1 using 20mm graded aggregate finished even and rough to receive tiles complete all as specified and directed by Engineer-in-Charge.
103	Material and labour for machine cut kota stone slab20-25mm thick as in flooring, laid over with and including 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
104	Material and labour for machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as skirting/ Dado etc. laidover with and including10mm thick cement rendering in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
105	Material and Labour for factory made,machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment,any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioningcomplete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account.
106	Material and Labour for factory made,machine pressed precast interlocking paver block 60 mm thick with grey cement andpigment,any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete cushioningcomplete all as specified and as directed by Engineer-in- charge.
107	Material and Labourfor Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and as directed by Engineer-in- charge.
108	Material and Labourfor Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and as directed by Engineer-in- charge.
109	Material and Labourfor Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and as directed by Engineer-in- charge.
110	Supply and fixingPressed steel frames for doors with one or more rebates with and includinglock strike plate, fixing lugs, etc., size of frame 105mm x 60mm,with and including one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
111	Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhatcomplete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
112	Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.Note:- Wire gauze/ glass shall be measured and paid separately.Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
113	Supply and fixing 100mm long powder coated mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge.
114	Supply and fixing anodised aluminium handle cast type 150mm long complete all as specified & directed by Engineer-in-charge.
115	Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm longcomplete all as specified & directed by Engineer-in-charge.
116	Supply & fixingaluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
117	Supply & Fixing for steel window box type double shutter( glazed with wire gauge)with side hung shutters includinghinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded and including window guard bar, tower bolt,flat iron for fixing wire netting with andincluding one shop coat of zinc chromate primer paintand making good to distrubed portion match with existing surfacescompleteall as specified and directed by Engr-in-Charge.
118	Material and labour for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or lesscomplete all as specified and direcgted by Engr -in-Charge
119	Material & Labourfor Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / Loose soil complete all as specified and directed by Engineer-in- Charge. complete all as specified and directed by Engr-in-Charge.
120	Material & Labourfor cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in post holes, foundations, filling and mass concrete, side kerb, haunching , coping , and like,in filling back ofPressed steel chowkats/frame and in bed blocks to hold fast complete all as specified and directed by Engr-in-Charge.
121	Supply & Fixing mild steel work as in tubular (round/square/ rectangular shape of pipes as approved by Engr-In-Charge) trusses, purlins, rafter, MS plates,connecting plates,up to height 7mtr including postspecial shaped washers etc complete incl necessary nut bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1979 grade St-240 complete all as specified and directed by Engr-in-Charge.
122	Supply & Fixing Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentincluding cutting to shape as directed, drilling holes, for nut & bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410 -W (Gde E- 250) quality Acomplete all as specified and as directed by the Engineer-in-Charge
123	Supply andfixing 5-10 mm dia , exceeding5cm and not exceeding 10cm long MS screw bolt machine made with hexagonal or square head at one end and screwed the other,or screwed both ends,each screwed end fixed with washer complete all as specified and as directed by Engineer-in-charge.
124	Supply andfixing forPre -Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm Thickness of any colour having aTensile strength of 550 MPA as in roof covering fixed with \"L\" type or \"J\" type or cranked hook bolts all as specified and directed by Engineer-in-Charge.
125	Supply andfixingPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
126	Material and Labour for preparation of new steelsurfacesof any description over 10cm width or girth and applying two coats of synthetic enamel paint over with and including one coat of red oxide zinc chrome primercomplete all as specified and as directed by Engineer-in-charge.
127	Material and Labour for precast cement concrete 1:1/2:3 type A1 (Using 20mm graded stone aggregate) as in cover slabs set in cement mortar (1:4) complete as specified and directed by Engineer-in charge.
128	Material and Labour forExtra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete as specified and directed by Engineer-in charge.
129	Material and Labour forConcealed point wiring formodular type fittingsusing approved colour coding as per IS (Red, Black and Green for single phase circuits), with twosingle core 2.5 SqmmPVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked, drawn through with and including new PVC rigid conduit 20mm dia( heavy duty )ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all new fittings and all accessories i.e pipe bend pipe hook, elbow,junction box,with and including one single core 2.5 SqmmPVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade(ISI Marked) (as in greencolour) as continuous earth continuity conductorincluding modular metal flush box concealed with front & modular cover plate with frame suitable matching colourof required module for mounting or housing modular switches 5Amp /6 Amp ,modular socket outlets 5Amp /6 Amp,modular fan regulators, modular two way switches 5Amp /6 Amp andmodular bell push 5Amp /6 Amp for bell/ buzzer with and including blanking plates & all other fixing accessories for one light/ fan point controlled by one way 5/6 Amps modular switch complete all as specified and as directed by Engineer-in- chargeNotes for serial item nos.129.00, 130.00 & 131.00 : (i)The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flushfixed with cement mortar 1:4 etc.However modular switches 5Amp /6 Amp, modular socket out let5Amp /6 Amp , modular fan regulators modular two way switches 5Amp /6 Ampand modular bell push 5Amp /6 Amp for bell/ buzzershall be measured and paid seperately under respective items of Schedule\"A\" BoQ.(ii) The rate of cutting chases (as required) is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clipsas directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account
130	All as per serialitem No 129.00 of BoQhere-in-beforebut for modular socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.
131	All as per serialitem No 129.00 of BoQ here-in-before but for modular socket outlet 5 pin 5/6 Amp on independent boardbut not below the switch board, complete all as specified and directed by Engineer-in-charge.
132	Material and Labour forConcealed point wiring formodular type fittingsusing approved colour coding as per IS (Red, Black and Green for single phase circuits), with 4.0 Sqmm twosingle core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked, drawn through with and including new PVC rigid conduit 25mm dia( heavy duty )ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all new fittings and all accessories i.e pipe bend pipe hook, elbow,junction box,with and including one single core4.0 SqmmPVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade (ISI Marked) (as in green colour) as continuous earth continuity conductor (green in colour) including modular metal flush box concealed with front & modular cover plate with frame suitable matching colourof required module for mounting or housing modular switches 15Amp/ 16 Amp and modular socket outlets 15Amp/16Amp, formodular socket out let point 15Amp/16Amp controlled by one way 15Amp/16 Amp modular switch with and including blanking plates & all other fixing accessoriesand including cutting chases (as required) and making good surfaces to match with adjoining surfacecomplete all as specified and as directed by Engineer-in- chargeNotes for serial item no.132.00 : (i)The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flushfixed with cement mortar 1:4 etc.However modular switches 15Amp/16Amp andmodular sockets 15Amp/16Amp shall be measured and paid seperately under respective items of Schedule\"A\" BoQ.(ii) The rate of cutting chases (as required) is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clipsas directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account
133	Supply and fixing sheet metal enclousers made out of CRCA mild steel sheet , IP-54 protection, flush mounted with metaldoor, powder coated DB SPN 12 way 230 V AC with 200 Amp rated copper bus bar, Double Door,08 modules, dust and vermin proof suitable for incorporation of MCBs/ MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs/ MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of200 Ampscopper bus bar is included in this item and nothing shall be paid extra on this account.
134	Supply and fixing sheet metal enclousers made out of CRCA mild steel sheet , IP-54 protection, flush mounted with metaldoor, powder coated DB SPN 8 way 230 V AC with 200 Amp rated copper bus bar, Double Door,08 modules, dust and vermin proof suitable for incorporation of MCBs/ MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs/ MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of200 Ampscopper bus bar is included in this item and nothing shall be paid extra on this account.
135	Supply and fixingMCB SP 6 to 32 Amps,230 volts ,AC supply, rupturing capacity not less than 10KA,\" C\"Curve ,ISI Marked,complete all as specified and directed by Engineer-in-charge.
136	Supply and fixingMCB 32 Amp SPN,240Volt , rupturing capacity 10 KA , CURVE ‘C’ ISI Marked,complete all as specified and directed by Engineer-in-charge.
137	Supply and fixing Modular Switchone way ,6Amp ,1 module, 250 volts ,AC supply,ISI marked , complete all as specified and directed by Engineer-in-charge
138	Supply and fixingModularSocket outlet , 6 Amp-2/3 pin combined 2 module, 250 volts ,AC supply, ISImarkedcomplete all as specified and directed by Engineer-in-charge.
139	Supply and fixingModular Switch one way 16 Amp,1 module250 volts ,AC supply ,ISI marked complete all as specified and directed by Engineer-in-charge.
140	Supply and fixing Modular Socket outlet 6Amp/16Amp-2/3 pin combined,2 module ,250 volts ,AC supply, ISI marked complete all as specified and directed by Engineer-in-charge.
141	Supply and fixing ceiling rose 3 terminal flush type 6 Amp 250V ,ISI marked,AC supply, topline series with polycarbonate 20mm x 50 mmtwo to three terminal, complete all as specified and directed by Engineer-in-charge.
142	Supply and fixingLamp holder ,ISI markedof PVC/Polycarbonate type with back plate suitable for batten fittingwith and including 9Watt LED retrofit Lamp (base B-22) complete all as specified and directed by Engineer-in-charge.
143	Supply and fixing New generaton energy saving, wall mounted LED Tube light batten fittings, extruded aluminium heat sink provided for efficient heat dissipation and intergrated electronic drive 20 Watt LED duly fitted on PVC Square block ,6500K, 4.00 feet long with and incuding LED Rod 20 Wat ,230 volt,50Hzs complete all as per manufacturer\"s instructions including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge. Notes: (a) Contractor has to furnish a replacement warranty of 02 years forLED Light fittings complete including lamps from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact.(iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries.(b) All LED lightmust meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13.(c) Scope of work shall include to fixLED Light fittings walls/ceiling which includes needfulT & P andrequired accessories etcif any, complete including making connection, testing etc complete. No extra payment is admissible on these account. (d) The rate of electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector is included in this item and nothing shall be paid extra on this account.
144	Supply& Fixing Building Security LED Lightof 25 watt , IP 66 , luminaire with high powerwith toughened glass complete as per manufacturer\"s instructions withand includingbracket made out with 40mm bore Galvanised Iron Light grade pipe1.20 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt ,nuts and washers complete andfixing to wall / column with and including electrical connection with 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed by Engineer-in-charge. Notes:(a)The rate ofbracket made out with 40mm bore Galvanised Iron Light grade pipe1.20 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nutsand electrical connection with 1.5 mtr long twin core round copper conductor cable of suitable size is included in this item and nothing shall be paid extra on this account.(b) Contractor has to furnish a replacement warranty of 02 years for Security LED Light fittings complete including lamps from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact.(iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries.(c) All Security LED Light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13.(d) Scope of work shall include to fix Security LED Light fittings walls/building which includes needfulT & P andrequired accessories etcif any, complete including making connection, testing etc complete. No extra payment is admissible on these account.
145	Supply and fixingEnergy saving IP-66 Flood Light luminaire with high power COB LED flood light fitting sqaure shape 70 Watt , 5000K,230V ,AC supply,with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrossion resistant complete with suitable bolt and nuts complete all as per manufacturer\"s instructions including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge. Notes: (a) Contractor has to furnish a replacement warranty of 02 years forLED floodLight fittings complete including lamps from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact.(iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries.(b) All LED flood lightmust meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13.(c) Scope of work shall includeto fix LED flood Light fittings walls/ceiling which includes needfulT & P andrequired accessories etcif any, complete including making connection, testing etc complete. No extra payment is admissible on these account. (d) The rate of electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector is included in this item and nothing shall be paid extra on this account.
146	Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-54 protection, flush mounted for metal door, powder coated DB VTPN 4 way, 415 V AC with 200 Amps rated copper bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCBs/ MCCBs/ Isolators and earth & neutral bus bar and using copper lugs pin/ Ring type for cable connection conforming to IS/IEC-61439-2:2011, BS-5484complete all as specified and as directed by Engineer-in- charge.Notes: (i)MCBs/ MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of200 Ampscopper bus bar is included in this item and nothing shall be paid extra on this account.
147	Supply and fixingMCCB 63 Amp, 4 Pole,415 volt, ISI Marked,short circuitbreaking capacity not less than 25KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc .complete all as specified and directed by Engineer-in-charge.
148	Material and Labourfor earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion.Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soili.e. excavation, returing filling and removal, form workis included in this item and nothing shall be paidextra on this account.(iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
149	Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 25 Sqmm3.5 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
150	Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 25 Sqmm4 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
151	Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 16 Sqmm2 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
152	Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 10 Sqmm2 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
153	Material and Labour for Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls complete allas specified and as directed by Engineer-in-Charge.
154	Supply and FixingExhaust fan 300mm sweep (Heavy duty) steel body, BEE, 5 star rated ,AC Supply, single phase ,230 volts, 50HZ,900RPM with and includingframe including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm longwith and including serial number of fan as issued by Engineer-in-charge and GE office namewith red colour permaent marker complete all as specified and directed by Engineer-in-charge.
155	Supply& Fixing Ceiling fan of 1200mm sweep complete with blades, down rods, with andincluding remote control, single phase, 50 Hz, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable sizefrom ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement, with and including serial number of fan as issued by Engineer-in-charge and GE office namewith red colour permaent marker complete all as specified and directed by Engineer-in-Charge.
156	Supply, install, testing and commissioning of water cooler fully stainless steel body, 5 star rating, electric driven single phase having storage capacity 40 ltrs and nominal cooling capacity 40 ltrs per hourcomplete as per manufacturer\"s instructions andas directed by Engineer - in - charge.
157	Supply , install , testing and commissioiningEvaporative air cooler in steel body(Desert cooler) with propeller cooler fan made out of hot deep galavinized steel thickness 1 mm body and 2 mm removable sides and back panels single phase 230 volts of fan size 450 mm sweep with submersible pump of suitable size (maximum power consumption 250 watts)ISI marked5 star rating , BEE approved having normal air flow capacity 6000 cum per hr , with andincluding 15mm bore Ball brass valves,high pressure, with polythene float and fly nut, with and including 15mm bore Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends ,nuts,washers, with and includingPVC connections of 15mm bore , leakage proof joints and all the necessary arrangmemnts to take water from GI Pipe medium grade 15mm bore to air cooler. Note:- (i) Sufficient length as required at siteof 3 core PVC sheathed round cooper cable of size 23/076mm to enable fixing into plug point shall be provided by the contractor at his own cost . The rate of this aspect is included in this item and nothing shall extra be paid on this account.(ii) The rates of 15mm bore Ball brass valves,high pressure, with polythene float and fly nut, 15mm bore Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, nuts,washers, PVC connection of 15mm bore, leakage proof jonts etc and making connection from GI Pipe medium grade 15mm bore to air cooler are included in this item and nothing shall extra be paid on this account. (iii) The rate of arrangement for power connection and water connection to the desert cooler is included in this item and nothing shall extra be paid on this account.
158	Supply and Fixing water heater (Geyser)Auto restrat and safety measures type electrical operated 230/240 Volts25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete complete all as specified & directed by Engineer-in- Charge.
159	Material and Labour for 4 Nos. rawl plug of suitable size (4\"-6\") with nuts & bolts andgroutinginRCC / Brick wall,cutting of exisiting GI pipe line of size 15 mm dia in position for insertion of tee , elbow, niple, union, reducer, branch connection ,etc. with necessary GI fittngs i.e. Tee, elbow, niple, union ,reducer, branch connection etc. andplumbing work and connection jointingand making good as per existing surfaces completeall as specified and directed by Engineer-in-Charge.Note : The rate of 4 Nos. rawl plug of suitable size (4\"-6\") with nuts & bolts ,Tee, elbow, niple,union, reducer, branch connection etc. of galvanised iron is included in this item and nothing shall be paid extra on this account.
160	Supply and fixingSingle Pole and Neutral enclosure with a two pin and earth plug and socket complete with and including oneMCB single pole of capacity 25 Amps,\"C\" curve,10KA ,240 voltscomplete all as specified and directed by Engineer-in-Charge.Note: The rate of oneMCB single pole of capacity 25 Amps,\"C\" curve, 10KA, 240 volts is included in this item and nothing shall be paid extra on this account.
161	Supply & fixing Steel water tubing 15 mm bore medium grade, galvanised, ISI Marked including all tube fittings with screwed and socketed joints fixed to walls, ceiling or under floors etc complete complete all as specified & directed by Engineer-in- Charge.
162	Supply and Fixing Stop valves, cast copper alloy, screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed for iron pipe of bore 15 mm ISI Markedcomplete all as specified and directed,all as specified & as directed by Engineer-in-charge.
163	Supply & fixingPVC connection 15mm size with PTMT nuts 450 mm long ,(Hot series braded, threaded and cold series)complete all as specified & directed by Engineer-in-charge.
164	Supply and fixing15mm bore Bib tap ,cast copper alloy,, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
165	Material and Labour for Cutting of exisiting GI pipe line of size 20 mm / 25mmdia in position for insertion of tee , elbow, niple, union, reducer, branch connection ,etc. with necessary GI fittngs i.e. Tee, elbow, niple, union ,reducer, branch connection etc. andplumbing workcompleteall as specified and directed by Engineer-in-Charge.Note : The rate of Tee, elbow, niple,union, reducer, branch connection etc. of galvanised iron is included in this item and nothing shall be paid extra on this account.
166	Material andLabour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified.(Note:- Punned thickness shall be considered for payment purpose)
167	Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete allas specified and as directed by Engineer-in-Charge.
168	Supply and fixing GI tubing, light grade 40 mm bore complete with all fittings for cable protection, fixed along poles or laid under floor , under road and hardstandingetc. complete with flat iron clamps of size 25mm x 4 mm , nuts, bolts and washers complete and making good after laying of cable complete all as specified and as directed by Engr - in- Charge.
169	Material and Labour for Making the hole under road and hard standing suitable for laying and inserting pipe up to 100mm dia pipe of any length by mechanical drill system or Auger system and making the surface good as per existing surface complete all as specified and all as directed by Engineer-in-charge. Note : The rate of pipe is not included in this item and Pipe of suitable size shall be measured and paid seprately under relevant item of Schedule \"A\" BoQ.
170	Supplying and laying un-reinforced precast concrete cable cover, class LV ,type 1 ,flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engineer-in-charge.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Provision Of Construction Of Four Guard Rooms Along With Toilets Cum Bathrooms , Repair Bay, 2 X Inspection Pits, Tools And Mt Stores, Paint Store And Fol Store Covered Under Various Lbw Works Under Ge ( North) Bathinda At Bathinda Mil. Stn., Bathinda-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Provision Of Construction Of Four Guard Rooms Along With Toilets Cum Bathrooms , Repair Bay, 2 X Inspection Pits, Tools And Mt Stores, Paint Store And Fol Store Covered Under Various Lbw Works Under Ge ( North) Bathinda At Bathinda Mil. Stn., Bathinda-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us