|
| 1 | (B/R PORTION)Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed. |
| 3 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 4 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | Supply and fixing factory made uPVC white colour Sliding window Three track,made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 6 | M&L for 1st class hard wood ,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints specified and directed. |
| 7 | M&L for 1st class hard woodPlain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density , wood particle board with commercial face veneers laminates both faces : supplied and fitted to chowkats and rebated bolection moul ded bead is pro vided and planted round the panels (Each side of panel) |
| 8 | M&L for applying two or more coat of french polish including preparing, claening the old surface and applying wood filler on old wooden surfaces of any description over 10cm width or girthcomplete all as directed by Engineer-in-Charge. |
| 9 | S&F hold fastfor window &doors, madeto shapeas requiredcomplete all as specifed and directed. |
| 10 | S & F 200 mm long Brass Finish anodised barrel tower bolt of extrued sectioncomplete all as specifed and directed |
| 11 | S&F 300 mm long Brass Finish anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specifed and directed |
| 12 | S&F 100 mm long butt hinges MS medium weight cold rolled complete all as specifed and directed. |
| 13 | S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed . |
| 14 | Demolition of stone slabs , floor andwall tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed. |
| 15 | M&L 18-20mm thick granite ( Z- black)slab in window cills, cooking platform , steps of stair case etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laidover screed bed 20mm thick in CM 1:4 all as specified and as directed. |
| 16 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregatein floors Slabs, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifed and directed. |
| 17 | M&L Mild steel TMT bars 10mmdiaand over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specifed and directed |
| 18 | M&L Mild steel TMT bars 6mm and 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specifed and directed |
| 19 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified and as directed by the Engineer-in-Charge. |
| 20 | M & L for colour Glazed ceramic tiles in vertical surface 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as spd and as directed. |
| 21 | M&L anti- skid digital , full body, homogeneousVitrified tiles Matte finish (in any shade ) 8 to 10mm thick Size of tiles shall not be less than 1200mmx 600mm , in floor / skirting / dado etc jointed and pointed in neat cement slurry with white or coloured to match including over 15 mm thick screed bed CM 1:6 completed all as directed. |
| 22 | M & L for Virified digital Ceramic tiles light / Dark shedDouble charged / ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, (1200 x 600 mm ) / (1200 x 800 mm ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed by Engineer-in-charge. |
| 23 | Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. |
| 24 | M & L 25 mm thick cement concrete as in foor padingtype B-0,1:2:4 (12.5mm graded aggregate finished cement concrete surface even and smooth without using extra cement complete all as specifed and directed |
| 25 | M&L complete Removal of existing treatment and applying twocoat of plastic emulsion paint over a coat of primer to old decorated surfaces of wall over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge. |
| 26 | M&L complete Removal of existing treatment and applying twocoat of plastic emulsionpaint over a coat of primer to old decorated surfaces of ceiling over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(upto 4 th storey). |
| 28 | Material and labour of CI (spun) Bends (any radious) complete all as specified and directed |
| 29 | Material and labour of CI spun Cowl for 100 mm bore pipe complete all as specifed and directed |
| 30 | Material and labour of CI (spun) Branch pieces, singel (any radiousequal or unequal) for 100 mm bore pipe complete all as specifed and directed |
| 31 | Supply and fixing of unplasticized (uPVC) of type-A for use in ventilation pipe work and rain water and rain water harvesting, single socket, 110 mm bore in any length including rubber ring joints and fixed to wall with clips, otherstandered material and including taking down old 110 mm dia CI rain water pipe & removed from site all as specified in IS 13592 (upto 4 storey) |
| 32 | Material and labour in repairs of unplasticized (uPVC) bends for 110 dia pipe complete all as specified and directed. |
| 33 | Material and labour in repairs of unplasticized (uPVC) Junctio single T for 110 dia pipe complete all as specified and directed. |
| 34 | Taking up GI water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed. |
| 35 | Taking up GI water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed. |
| 36 | S&F 15mm bore galvanised iron pipe with all fittings after cleaning fixed to wall/ceiling or laid in floors all as directed by Engineer-in-Charge. |
| 37 | S&F 20mm bore galvanised iron pipe with all fittings after cleaning fixed to wall/ceiling or lain in floors all as directed by Engineer-in-Charge. |
| 38 | S&F in repairaluminium door closer hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000mm in width and of weight of 61 to 80 kg(Aluminium (extruded section) body ) complete all as specified and directed. |
| 39 | S&F 1000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 40 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 20gms-210gms) complete all as specified and directed. |
| 41 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixedwith stainless steel wire staples complete all as specified and directed. |
| 42 | S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board)INCL taking down old one. |
| 43 | S&F Decorative laminate type ( 0.9mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as peranufacturer\"s instructions complete all as specified and directed. |
| 44 | Demolition of RCC of any description and in any position not otherwise specifically provided for .(upto 04 storey High of building) complete all as specified and directed. |
| 45 | S & F in repaircast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed. |
| 46 | M & L Salt-gauged stoneware gully traps, square or round mouthed, type \"P\", size 150x150 mm complete all as specified and directed. |
| 47 | S&F in repair CI Nahani trap of 100mm dia, includingjointing to waste pipe fixed in cement concrete,(1:2:4) type B1 ( using 20 mm graded crushed stone aggregate). Complete all as specified and as directed . (upto 04 storey High of building). |
| 48 | S&F CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed . (upto 04 storey High of building). |
| 49 | S&Fin repairclassicCylindrical lockmade of brass complete all as specified and directed.Make godrejcat no:3791 or equivalent make as specified in tender. |
| 50 | S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) oras in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed. |
| 51 | S&F for 12 mm thick toughned frosted glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 52 | Supply and fixing in repair 35mm dia gold line curtain rod alongwith decorative brackets and supporting and rings at a gap of 4\" (Make : Vista sher wood) glass fixed with necessary beading complete all as specified. |
| 53 | S & F Continuous (piano)brass hinges ,SS, bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed. |
| 54 | S&F 150 mm Extruded brass handles, fabricated type polished decorative type complete all as specified and directed. |
| 55 | S&F brass multi purpose cupboard lock , size 75 mm , 4 lever complete all as specified and directed. |
| 56 | S&F stain less brasshandel 100 mm long decorative type complete all as specified and directed. |
| 57 | S&F brass finish tower bolt 75 mm long, hevy duty complete all as specified and directed. |
| 58 | S&F in repair Any Size 6 mm thick bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 59 | S&F cupboard magnets heavey duty in cupboard etc all as spd and as directed. |
| 60 | S&F in repair PVC wall paper of approved design with CMC powder and a base of 6 mm ply (over 3mm thick wall care putty) on the background fixed with adhesive and a design bit of 38 mm on the ply complete all as specified and as directed. |
| 61 | S&F in repair15 mm angular stop cock chromium plated with wall flange complete all as specified and as directed .(Make : Jaqur cat no- KUP-35053PM or equivalent make specified in tender. |
| 62 | S&F in repair Concealed Stop Cock Regular Body Suitable for 15mm Pipe Line with Spindle Extension & Plastic Protection Cap (without Exposed Parts) and Exposed Part Kit of ConcealedStop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 or ALD-081)(Make : Jaqur cat no- ALD-83 and KUP-35083KPM or equivalent make specified in tender. |
| 63 | S&F In repairCP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and as directed . (Make : Jaqur cat no- ALD-769L300x190 or equivalent make specified in tender. |
| 64 | S&F in repair CP waste coupling 32mm bore full threaded complete all as specified and as directed . ( Make : JAQUAR cat No. ALD-705L130 or equivalent make specified in tender. |
| 65 | S&F in repair chromium plated Toilet Roll Holder with Stainless Steel Flap complete all as specified and as directed . ( Make :Jaquar Cat No:ACN-1153S or equivalent make specified in tender. |
| 66 | S&F in repair Towel Ring Round with Round Flange complete all as specified and as directed . (Make : Jaqur cat no- ACN-1121BN )(Chrome) or equivalent make specified in tender. |
| 67 | S&F Chromium plated Single Lever Basin Mixer with Popup Waste with 450mm Long Braided Hoses fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed.( Make- Jaquar Cat no-KUP-35051BPM or equivalent make specified in tender. |
| 68 | S&F in repair 15mm bore two way bib cock with wall flange chromium plated complete all as specified and as directed(Make : Jaqur cat no- KUP-35041PM ) or equivalent make specified in tender. |
| 69 | S&F in repair 15mm bore bib cock with wall flange for 15mm bore pipe chromium platedcomplete as specified and as directed.(Make :KUP-35037PM) (Chrome)or equivalent make specified in tender. |
| 70 | S&F in repair 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete as specified and as directed. (Make :JAQUAR Cat No.ALD-579 . (chrome) or equivalent make specified in tender. |
| 71 | S&Fin repair Soap Dish (Polycarbonate) complete as specified and as directed ( Make : jaquar) Cat No. AQN-7733or equivalent make specified in tender. |
| 72 | S&Fin repair Soap Dispenser with Glass Bottle complete as specified and as directed ( Make : jaquar) Cat No. ACN-1135N (chrome)or equivalent make specified in tender. |
| 73 | S&Fin repairtumbler holder complete as specified and as directed.Make :Cat No. ACN-1141N(chrome) ofJaquar or equivalent make specified in tender. |
| 74 | S&F in repair towel rack with lower hanger and hook 600mm long chromium plated complete as specified and as directed.(Make : Jaquar cat no- AQN-7781 ) (Chrome)or equivalent make specified in tender. |
| 75 | S&F in repair Special designed glass shelf of size 600mm with CP wall flange complete as specified and as directed.(Make :Jaquar cat no- AKP-35771Por equivalent make specified in tender. |
| 76 | S&F in repair corner glass shelfincl takingdown old one. complete as specified and as directed. ( Make : Jaquar cat No CPA-1173) or equivalent make specified in tender. |
| 77 | S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge.(Make: Jaquar -ALD-803AB,ALD 805 AB) or equivalent make specified in tender. |
| 78 | S&F in repair vitreous chine wash hand basin Table Topof size 565mm x 420mmx140mm (any selected colour) Product Range - (KUBIX) complete as specified and as directed. Make : Jaquar Productcode no- KUS-WHT-35935 or equivalent make specified in tender. |
| 79 | S&F in repair vitreous china floormounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed.(Make : JAQUAR, Cat No: OPS-WHT-15853S300UF) or equivalent make specified in tender. |
| 80 | M&L 12 MM thick seamless waterproof and and termite proof WPC louvers wall panels any colour any design 5.5mm thick WPC white board fixed with prebond adhesive and screwed to wall/ ceiling with corner beading etc, complete all as per manufactures instructions all as specified and as directed. |
| 81 | M&L for 2nd class hardwood plain fillets , bullnosed , splayed chamfered or rounded on one edge or face , square , rectangular or triangular in section , clean swan secured with nails or brads of sectional area exc 13 and nexc 25 sqcm with french polishing with wood filler , complete all as specified and directed. |
| 82 | S&F 100 mm wide decorative corner bead (of approved design ) made of plaster of paris , fixed with screw on wall / ceiling , joints finished with plaster of paris for neat and joint free look complete all as specified and as directed. |
| 83 | S&F in repair vitreous urinal (top inlet) with fixing accessories incl spreader,size of urinal345x320x610 mm,complete all as specified and directed.(Make : JAQUAR, Cat No:URS-WHT-13257) or equivalent make specified in tender. |
| 84 | S&F in repair chrome wall mounted pressmatic taps urinal valve auto closing system for urinal ,complete all as specified and directed.(Make : JAQUAR, Cat No: PRS- CHR-077) or equivalent make specified in tender. |
| 85 | Excavating in post holes hard / dense soil (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in any type of soil. |
| 86 | Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting pointin any type of soil all as specified and directed. |
| 87 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 88 | M&L for brickwork with fly-ash bricks (with old size bricks), straight or curved on plan exc 6m meanradius built in CM 1:6 complete all as specified and directed |
| 89 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finishedrendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 90 | M&L for rendering 10mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finishedrendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 91 | S&F for liquid water proofing compound complete all as specified and directed |
| 92 | M& L for providing on new plastersurfaces of wallsapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed. |
| 93 | M&L for providing on new plaster surfaces of walls applying two coats ofdistemper oilemulsion over one coat of primer all as specified and directed. |
| 94 | Dismantling of floor hearth, wall tiling incl cement mortar bedding( but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified. |
| 95 | M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 96 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick backing coat in CM 1:4 etc complete all as spd and as directed. |
| 97 | S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 98 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 99 | M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed. |
| 100 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 101 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 102 | S&F inFalse ceiling with \"E\" board \" Classic\"\" Re inforced, designer series, board with HPSC of size 600x600mmx4mm thick fixed on Powder coated aluminimum snap grid to support the boards/files with powder coated aluminimuum anodised ain \"T section 36mmx25mmx1.40mm ,cross tee 23.50mmx23.50mmx1.40mm thick and aluminium angle 25mm x 25mm x1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabsby means of ceiling cleats made out of GI flat 40x3mm size60mm long and expansion hold fasteners 12.5mm dia, 40mm long compelete all as specified and directed |
| 103 | S&Fpowder coated 50 micronaluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 104 | S&F aluminium anodised powder coated for doors,windows,ventilators and partition with one or more rebate (Minimum thickness of powder coating 50 micron) and Three track with 1.80 mm thick channel section and shutter frame thickness 1.65 mm without sash bars,Aluminium section weighing 0.55 kg/mtr including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc.Complete all as specified and directed. Note:- 1.Size of window shall be as per site requirement. 2. Glass & wire cloth shall be measured separately. |
| 105 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 106 | S&F 4mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed. |
| 107 | M&L for RCC nominal mix 1:2:4 type B1 using 20mm grade aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 108 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed |
| 109 | E/M Portion M & L for point wiring surface type with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) of MMS typewith accessories such as bends, cross, elbow, tees etc. of suitable sizeincluding MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated sheet top cover(ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan/ceiling fan/ call bell point pointcontrolled by one switch. Note : Wiring Color code i.e. Red/Yellow/Bluefor Phase, Black for neutral and Green for earth shall be maintained.( for concealed wiring chase cutting will be measured and paid seperately.) |
| 110 | All as per item No 109.00 above but for one three pin socket outlet on same board |
| 111 | All as per item No 109.00 above but for one three pin socket out let 5 amps on independent board. |
| 112 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed |
| 113 | S&FCeiling rose surface type 3 terminals 65x20mm compelete all as specified |
| 114 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed |
| 115 | S&F Switch socket outlet 3 pin 6 amp\" flush type complete all as specified and directed. |
| 116 | S&F Fan step regulator, 120W - 2 module complete all as specified and directed |
| 117 | S&F White cover plate with frame, 1 module complete all as specified and directed |
| 118 | S&F White cover plate with frame, 2 module complete all as specified and directed |
| 119 | S&F White cover plate with frame, 3 module complete all as specified and directed. |
| 120 | S&F White cover plate with frame, 6 module complete all as specified and directed. |
| 121 | S&F White cover plate with frame, 8/12 module complete all as specified and directed. |
| 122 | S&F White cover plate with frame, 1/12 module complete all as specified and directed. |
| 123 | S&F Metal flush box 3 module complete all as specified and directed. |
| 124 | S&F Metal flush box 6 module complete all as specified and directed. |
| 125 | S&F Metal flush box 8/12 module complete all as specified and directed. |
| 126 | M & L for point wiring with 4.00 sqmm (Nominal Area) FRLSPVC insulated un sheathed multi stranded copper conductor, 1100 Volts gradefor 3 Pin socket outlet 15Amps on independent board with PVC conduit (ISI Marked) medium duty not less than 20mm diawith accessories such as elbow, tees,internal & external bend etc. of suitable size including continuous earth wire FRLSPVC insulated 4.00 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified. Note : 1) Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained. 2) Necessary chase cutting for conduits if requires, shall be measured & paid separately under respective items in this schedule. |
| 127 | S&F modular Switch Socket combination outlet 6 pin 16 Amps flush type all as specified and directed |
| 128 | M & L for sub main wiring withsingle core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade,cable 6 sqmm copperconductor and connected to common earth dolly complete as directedincluding taking down old submain wiring.Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule. |
| 129 | Supply and fix MCB SP 240V, 6-32 Amps capacity complete all as specified and directed. |
| 130 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity40 to 63 AMPin the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 131 | S&F sheet metal enclosure of Bus bar of SPN 8 way complete all as specified and directed. |
| 132 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable sizecomplete all as specified and directed. |
| 133 | Supply & fixexhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed. |
| 134 | Supply and fixing of air circulator wall fans, 400 sweep complete with accessories 230V copper winding rotational type complete all as specified and as directed. |
| 135 | Supply and fixing LED lights fitting 1x 20W 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose ccomplete all as specified and directed. |
| 136 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 137 | Excavation in trenches not exc 1.5 mtr width and not exce 1.5 mtr in depth in soft/loose soil and getting complete all as specified and as directed. |
| 138 | M&L for sand cushioning /sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. |
| 139 | Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed. |
| 140 | Removal of excavated material to a disance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 141 | Supply & laying in Trenches Sub-class ‘B’ Bricks, kiln burnt, for Cable Protection, complete all as specified and as directed. |
| 142 | Supply, laying and testing cable XLPEInsulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100Volts grade with stranded aluminiumconductor of size 10 sq mm 4 core complete all as specified and directed. |
| 143 | Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
