|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified & directed. |
| 2 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for walling of random rubble,bedded and solidely hearted Uncoursedbuilt in CM (1:6) complete all as specified and directed |
| 4 | Extra over stone walling for hammer dressed to face stores and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course with maximum deprssion on face from straight adge held against the depressed surface on lime or sand stone not exc 20mm for rock faced complete all as specified & directed. |
| 5 | Demolition of cement concrete (un-renforced) in ground floor and paving not exc. 15 cm thickness(below or above ground level.) & removal of rubbish material complete all as specified & directed. |
| 6 | Taking down cement plaster any description on brick or stone walls etc complete all as specified & directed. |
| 7 | M&L for rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (water proof compound paid seperatly) complete all as specified & directed. |
| 8 | M&L 75 mm thick PCC(1:3:6) type C2 (using 20mm graded crushed stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed. |
| 9 | Demolition Mud in roofs, any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed. |
| 10 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified & directed. |
| 11 | M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified & directed. |
| 12 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed. |
| 13 | M&L rendering 15mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed. |
| 14 | Supply only Integral liquid waterproofing compound complete all as specified & directed. |
| 15 | M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. mincluding cleaning surfacesover bituminious primer complete all as specified & directed. |
| 16 | M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified & directed. |
| 17 | M&L for applying bitumious aluminium paint @ 0.15 kg per Sqm over bituminous layer in two coats complete all as specified and as directed. |
| 18 | S&F Rotational moulded polyethylene triple layer water storage tanksof 500 Ltrs capacity (cylindrical vertical with closed top) hoisted in complete necessary fittings i.e. nipple, union, socket, reducer, tank nipple etc and fixed in position all as specified in SSR Part I includingdismantling water tanks complete all as specified & directed |
| 19 | S&F in repair ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed. |
| 20 | Taking up or down 15mm steel tubing and connections, complete all as specified& directed. |
| 21 | Taking up or down 20mm steel tubing and connections, complete all as specified& directed. |
| 22 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floorcomplete all as specified & directed. |
| 23 | S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floorcomplete all as specified & directed. |
| 24 | S&F in repair brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed |
| 26 | S&F for Expanded metal weight n. exc 4.0 kg per sqm, cut to length, bent to shape required or mesh and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified & directed. |
| 27 | S&F M.S. frame work such as grills, gratings, angle frame etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work conforming to Fe.290.Gde-E-165 aoat of red oxide primerafter preparation of steel surfaces complete all as specified & directed. |
| 28 | M&L forpreparation ofnew plastered surfaces of wall and applyingtwo coats of weather proof exterior emulsion paint (Apex Ultima or equivalent) overone coat of primer over 1 mm thick wall care puttycomplete approved shade/tint complete all as specified & as directed. |
| 29 | M&L complete removal of existing treatment of wall surface and two coat of weather existerior paintfor over a coat of primer on to wall including one coats of wall care putty of 1 mm thick to obtained smooth surfaces complete all as specified and directed. |
| 30 | M&L writing letters or figures (Block, roman, Italic or Indian letter n.exc 30cm high) complete as specified and directed |
| 31 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified & directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified & directed. |
| 33 | S&F MS steel work in framed wk angle/tubulartrusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded.RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed |
| 34 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 35 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 36 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed. |
| 37 | M&L for PCC Type D2 1:4:8 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed. |
