|
| 1 | S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge. |
| 2 | Supply and fix in repairs ofPVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessoriesto wall complete all as specified and directed. (Make : CERA/Hindware/Prayag) |
| 3 | S & F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. (Make : CERA/Hindware/Prayag) |
| 4 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed. |
| 6 | M & L for rendering 10mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed. |
| 7 | M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed. |
| 8 | M & L forrendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primercomplete all as specified and directed. |
| 10 | M & Lpreparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 11 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primercomplete all as specified and directed. |
| 12 | M&L for cleaning of overhead tank of any description and in position, removing all scale and dirt by detergent/detergent powder and finally disinfected with bleach wash etc from tanks and mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning, capacity of tanks exc. 250 litres and not exc. 500 litres complete all as specified and as directed. |
| 13 | All as per item No 12 above but exc 500 & n.exc. 1000 ltrs capacity,complete all as specified and as directed. |
| 14 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 15 | Ditto all as per item No 14 above but 20mm bore. |
| 16 | Supply and fix Unplasticized PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm fixed complete to walls, ceilimngs in floors etc any type of pipes all as specified and as directed |
| 17 | Supply and fix Unplasticized PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm fixed complete to walls, ceilimngs in floors etc any type of pipes all as specified and as directed |
| 18 | Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 19 | S&F, rotational moulded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and as directed. |
| 20 | S&F, rotational moulded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and as directed. |
| 21 | S&F in repair tank cover black of size /shape for water tanks of storage capacity of 500ltr/1000ltr each (with necessary fixing/ lockingarrangement) to suit the existing provision complete all as specified & directed. |
| 22 | S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed. |
| 23 | Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed. |
| 24 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and \"S\" or \"P\" traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified and directed. (Make: CERA/Hindware/Prayag) |
| 25 | S&F in repairs vitreous China WC pan pedestal pattern white (excludingflushing cistern and flush pipe) but incl connecting to trap making good to floor complete all as spd and directed.(Make: CERA/Hindware/Prayag) |
| 26 | S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for /IWC suitable for 15mm bore pipe complete as directed(Make: CERA/Hindware/Prayag) |
| 27 | S&F in repairs PTMT waste coupling 32x100mm sink, complete all as specified and directed. |
| 28 | S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 29 | S&F in repair single lever Basin mixer without popup waste system with 450 mm long braided holes etc all as specified and directed. |
| 30 | S&F in repair 15 mm bore CP wall mixer (2-in-1) with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed. |
| 31 | S&F in repair stop valve cast copper alloy fency type with long shank and cup (concealed type) with crutch or butterfly handle screwed downboth ends for high pressure as per ISI suitable for 15mm dia iron pipe. ` |
| 32 | S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 33 | S & F in repair Long body Bib taps, 15 mm dia, cast copper alloy, quarter turn, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 34 | S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink, complete all as specified and directed. |
| 35 | S&F in repair forbrass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified. |
| 36 | S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed. |
| 37 | Taking down and re-fixing of old aluminum window of size n.exc 2.00 sqm each in same opening with necessary required repairs and fittings including glass rubber bedding and glazing clips completed all as specified by EIC. (Glass pan andwire gauge will be measured and paid separately as supply & fixing. |
| 38 | S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads incl hacking out old broken glass pane of any thickness and size complete all as specified and directed. |
| 39 | S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed. |
| 40 | S & F in repairs soft closing hinges 0 Degree high grade mild steel, bright finish or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed. |
| 41 | S&F in repairs 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 42 | S & F in repair 100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified by Engineer- in-charge. |
| 43 | S&F in repairs mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate fixed/ welded complete all as specified and directed. |
| 44 | Supply and fixing of rubber beading 40mm stripin bottom of door complete all as specified and directed. |
| 45 | S&F in repairs stainless steel handles of 100mm size for kitchen cabinate shutter complete all as specified. |
| 46 | S&F in repairs of fancy type overhead shower of 150x150mm square shape with arm swivel of 150mm long joint chromium plated screwed down 15mm bore Make- Jaguar/Cera/Hindware as approved by GE. |
| 47 | S&F in petty repairs for flush cistern of Concealed/Wall mounted/Single Piece with necessary flush fittings Kit completeas required at site, complete all as specified and directed |
| 48 | S & F in repair 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed. |
| 49 | M&L for 3mm thick figured or pin headglass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed byEngineer-in-Charge |
| 50 | S&F in repairs kitchen plate rack of stainless steel of size 900 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed |
| 51 | S&F in repairs Looking Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repairs stainless steel (SS-204) Plate/cutlery/Large Utensil/Cup &Saucer/Tali basket of size as per site requirement of approved sample complete all as specified and as directed. |
| 53 | S&F in repairs mild stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) |
| 54 | S&F in repairs sheet glass Shelf assembly 5.5mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed |
| 55 | S&F in repairs corner galss shelf 8mm thick of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed |
| 56 | S&F in repairs toilet paper holder as approved by GE complete all as specified and directed. |
| 57 | M&L in repair PVC (SWR) floor trap, 75mm dia plain with gratingincl jointing with solvent cement cement etc all as specified and directed. |
| 58 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 59 | M&L 25 mm thickPCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooringfinished even and fair without using extra cement complete all as specified & directed. |
| 60 | M&L for coloured glazed ceramic tilesin vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 61 | M&L for double charged vitrified ceramic tiles any shade 10 mmthick (square/rectangular) area of each tile exceeding exc. 0.42Sqm but not exc 1.00Sqm as in floors etc set and jointed in neat cement slurry fixed by using spacers of 5 to 8mm gap and joints filled with epoxy complete as per manufacturer instructions laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4)complete all as specified and directed. |
| 62 | M&L for double charged vitrified ceramic tiles any shade 10 mmthick (square/rectangular) area of each tile exceeding exc. 0.42Sqm but not exc 1.00Sqmas in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4)complete all as specified and directed. |
| 63 | M&L non skid-ceramic tiles joint free coloured tiles 7 to 8 mmthick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6)complete all as specified and directed. |
| 64 | S & F in repair 18mm thick PVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawerincluding dismantling of existing board any type or specification complete all as specified and directed. |
| 65 | Ditto all as per ser Item No 64 above but one side prelaminated type |
| 66 | Ditto all as per ser Item No 64 above but 12mm thick both side plain type |
| 67 | S & F continuous (Piono) hinges ,stainless steel bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 68 | S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 69 | S&F stainless steel handles of 100 mm size for Cup board complete all as specified. |
| 70 | S&F stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) |
| 71 | S & Fixing in repair 3 In 1 Color Led Mirror For Wall, of size 18 x 24 Inch Lighted Mirror (Rectangle) with necessary fittings complete all as specified and directed. Make : Sunsyze/ Mallik Design |
| 72 | S&F in repair Kitchen Sink with ANTI SCRATCH HONEYCOMB DESIGN Integrated Waterfall and Pull-down Faucet Set with Cup washer and Drain Baskets of Nano Coating. (Overall Size : 30\"x18\"x9\"/ Bowl Size :27.5\" x 14\" / Color : Nano Black Anti-scratch Finish, Sink Collar Panel Thickenss: 3 mm and Sink Thickness: 1 mm with plugs, washers including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe and Including Two Stainless Steel Baskets, One Wooden Chopping Board, One Attached Waterfall And Pull Out Faucet, One Abs Soap Dispenser, RO TAP, One Cup Washer, Drain Coupling, Drain Waste Pipe and Faucet Connection Pipe Complete all as specified and as directed. Note : Sink is made with premium 304 Grade Stainless steel, with excellent strength and durability, rust and dent resistance Make : Happy Homes /Plantex |
| 73 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery each complete all as specified and directed. |
| 74 | Refixing of shuttersof any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s)after resecuring or easing & adjusting, including taking down shutter from chowkat or framecomplete all as specified and directed. |
| 75 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile ditnensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 76 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 77 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 78 | S&F Butt hinges, medium weight Stainless steel 100 mm size complete all as specified and as directed |
| 79 | S&F Stainless steel handles 150 mm long fancy type (Min weight of 150gm) complete all as specified and directed. |
| 80 | S&F Stainless steel tower bolts 150mm long (Min weight of 150gm) complete all as specified and directed. |
| 81 | S&Fin repair Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed by Engr in charge. |
| 82 | S&F in repair Harrison rails (Heavy duty) mild steel chromium plated (Curtain Hanging Rods) 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed. |
| 83 | M&L Complete removal of existing treatment and applying two coat of oil bound distemper over a coat of primer over one coat of wall care putty of 1mm thick as per site requirement complete all as specified and directed |
| 84 | M&L Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying two coat of oil bound distemper, complete all as specified and directed.. Note : - The paint/Primer shall be applied with Hand Roller only. |
| 85 | M&L Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of oil bound distemper, complete all as specified and directed.. Note : - The paint/Primer shall be applied with Hand Roller only. |
| 86 | M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 87 | Description all as per item No- 83 here in before but one coat of synthetic enamel paint on steel surface. |
| 88 | M&L Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed. |
| 89 | M&L Preparation of olddecorated surfaces of Ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of oil bound distemper, complete all as specified and directed. |
| 90 | M&L Preparation of olddecorated surfaces of Ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed. |
