Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-02-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-02-2026 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings of any thickness below or above ground level complete all as specified and directed. |
| 3 | Material and labourfor 25mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate)complete all as specified and directed. |
| 4 | Material and labour for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 5 | Material and labour forjoint free Non-skid Coloured ceramic tiles7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 6 | Material and labour for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | Material and labour for glazed ceramic coloured tiles in vertical surface 300*450*7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchin backing of skirting and dado complete all as specified and directed. |
| 8 | Material and labour for rendering 10 mm thick as in backing coats of wall in CM 1:4 on fair face of brick walls/ concrete surfaces complete all as specified and directed. |
| 9 | Taking down cement plaster on brick or stone wall/ceiling/chajjas etc including raking out joints hacking for key ,scrubbing down with water etc complete all as specified and as directed. |
| 10 | Demolition or brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins,arches,pillars, etc but excluding ashlar facings,dressed stonework and precast concrete articles in cement mortor in 1:4 complete all as specified and directed. |
| 11 | Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 12 | Material and labour for brick work with fly ash bricks, straight or corved on plan to any radius in half brick thick walls,built in CM 1:4complete all as specified and directed. |
| 13 | Material and labour for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces finished even and smooth without using extra cement and water proofing compound @ 3% by weight of cement Norte: WPC shall be measured and paid separately. |
| 14 | Material and labour for rendering 15 mm thick in CM 1:6 over brick or concrete surfaces, finished fair and evenall as specified and as directed. |
| 15 | Material and labour for rendering 10 mm thick in CM 1:3 over brick or concrete surfaces on ceillingsurfaces, finished even and smooth without using extra cementall as specified and as directed. |
| 16 | Supply only approved intergral water proofing compound |
| 17 | Material and labourfor for preparing newly plastered surfaces and applying two coats of acrylic distemper over one coat of primer over two coats of wall care putty complete all as specified and as directed. |
| 18 | Material and labourfor for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 19 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint for newsurface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding complete all as specified and as directed. |
| 20 | Material and labourfor for preparing of old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed. |
| 21 | Material and labour for applying two coats of acrylic distemper over acoat of primer, over a coat of wall care putty on old decorated wall surfaces after complete removal of existing treatment all as specified and directed |
| 22 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint forold surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding incl preparation of existing surface |
| 23 | Taking down of chowkat with shutters without taking off shutters from the frame ,exceeding 1.5sqmbut not exeeding 2 sqm each all as specified and as directed. |
| 24 | All as per item No 23 above but not exceeding 1.5 sqmeach |
| 25 | Supply and fixing 18mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations., fixed with screws to timber frame work all as specified and as directed. |
| 26 | Supply and fixingcontinuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30mm width all as specified and as directed. |
| 27 | Supply and fixing IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at hoints all as specified and as directed. |
| 28 | Supply and fixing pressed steel frames for doors with one or more rebates of size 125 x 60mmincluding necessary fixing lugs, hinges, lock strike plate, etc., complete, aspecified, supplied and fixed all as specified and as directed. |
| 29 | Supply and fixing 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides all as specified and as directed. |
| 30 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed. |
| 31 | Supply and fixingfactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete all as specified and directed. |
| 32 | Supply and fixing second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats complete all as specified and directed. |
| 33 | Supply and fixing mild steel flat iron hold fast including bolts conforming to Fe 410-0of E-250 complete all as specified and directed. |
| 34 | Material and labour for providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces with creosotecomplete all as specified and directed. |
| 35 | Supply and fixing solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S squrare tube supppling in opening as per specification . |
| 36 | Supply and fixingfactory made solid panel PVC doors shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top &bottom rails M.S frame shall be coveed with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitanle PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specified . |
| 37 | Supply and fixing 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one all as specified and as directed. |
| 38 | Supply and fixing butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed. |
| 39 | All as per item No 38 above but 75mm long |
| 40 | Supply and fixing aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 41 | Supply and fixing floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed. |
| 42 | Supply and fixing aluminium anodised barred tower bolt of extruded section 150 mm long and fixed all as specified and as directed. |
| 43 | All as per item No 42 above but 100mm long |
| 44 | Supply and fixing extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified and as directed. |
| 45 | All as per item No 44 but 100mm long |
| 46 | Supply and fixing hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed. |
| 47 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 48 | Supply and fixing framed work such as grills, gratings,gates etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings, framework of water tanks and similar work con |
| 49 | Supply and fixing aluminium framed windows any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specifiedNote-: (glazing shall be measured and paid separatly) |
| 50 | Supply and fixing aluminium louvered type ventilator weighing 0.55kg/M with4mm thick frosted glass and all fittings, closing and opening type all as specified and directed. |
| 51 | Supply and fixing 4mm thick figured glass pin head type andglazing with in squares exc 0.5 sqm in each pane all as specifed. |
| 52 | Supply and fixing 4mm thick sheet plain galss ordinary quality and glazing with in squares exc 0.5 sqm in each pane all as specifed. |
| 53 | Supply and fixingstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed. |
| 54 | Supply and fixingof high strength fancy type ornamental curtainrod of outer dia 19mm & inner dia of 16mm including matching colour galvanised steel brackets of thickness 1.6mm all as specified and as directed. |
| 55 | Material and labourfor preparintg of new painted surface of steel and iron work of any description not specifically mented otherwise mentioned otherwise over10cm width or girth and applying twocoat of synthetic enamel paint over a coat of red oxide primer all as specified all as specified and as directed. |
| 56 | Material and labour for preparing of old painted surface of steel and iron work of any description not specifically mented otherwise mentioned otherwise over10cm width or girth and applyingtwocoat of synthetic enamel paint over a coat of red oxide all as specified and as directed. |
| 57 | Material and labourfor for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint all as specified and as directed. |
| 58 | Material and labour for preparing of old painted surface of wood work of any description not specificallymentioned otherwise over10cm width or girth and applying twocoat of synthetic enamel paintall as specified all as specified and as directed. |
| 59 | Dismantling of stone slabs and tiles of any description or thickness in floors ,aprons etc all as specified all as specified and as directed. |
| 60 | Material and labour for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of graniteall as specified all as specified and as directed. |
| 61 | Material and labourfor for rendering 15mm thick in CM 1:6 over brick or concrete wall surfaces finished even and smooth without using extra cementall as specified all as specified and as directed. |
| 62 | Material and labour for machine cut kota stoneflooring20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and making2 nos of 3mm thick grooves on edge of treads of staircase etcall as specified all as specified and as directed. |
| 63 | Material and labourfor machine cut kota stone slab 20-25 mm thick in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab overand including 10mm thick backing coat in cementall as specified all as specified and as directed. |
| 64 | Material and labour for machine cut cudappahstone 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingall as specified all as specified and as directed. |
| 65 | Material and labour for rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations |
| 66 | Material and labour for providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) 75mm thick finishing cement concrete surfaces even and fair without using extra cement as in plinth protection , path etc including necessary form work and provision of joints filled with bitumenall as specified all as specified and as directed. |
| 67 | Supply and fixing grating doom 100mm dia of(Minium weight 25gms) complete all as specified and as directed. |
| 68 | Supply and fixing 32mm dia ,polythelene pipe (LDPE) of low density of pressure rating 6kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed. |
| 69 | Supply and fixing PVC connection 15mm size wutg PTMT nuts if length 450 mm including taking down old one all as specified and directed. |
| 70 | Supply and fixing100mm bore Slotted vent cowl complete all as specified and as directed. |
| 71 | Supply and fixing100mm dia Cast iron floor trap,with grating including jointing t waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 72 | Supply and fixing 75mm dia Nahani trap all as specified and directed. |
| 73 | Supply and fixing in 75mm bore pipe traps \"P\" or \"S\" all as specified. |
| 74 | All as per item No 73 above but100mm bore |
| 75 | Supply and fixing 100mm cast iron sanitary connection \"P\" branch with branch 375 to 450 mm long excluding joint all as specified and as directed. |
| 76 | Material and labourfor PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement all as specified. |
| 77 | Supply and fixing 75mm PVC (SWR) bend any radius all as spcified all as specified and as directed. |
| 78 | Supply and fixing 75mm PVC (SWR) pipes single socketed in any length with rubber fing joints fixed to walls all as specified and as directed. |
| 79 | Supply and fixing PVC SWR 75 mm bore pipe single socketed in any length with rubber ring joints fixed to walls / trenches or in floors all as specified and as directed. |
| 80 | All as per item No 79 above but110 mm bore |
| 81 | Supply and fixing in repair stainless steel wall mounted rack of size 630 x700 x220 mm and thickness of sheet not less than 0.05 mm with porvh of keeping plates and other crockery fixed with screw and rawal plug etc on wall complete all as specified. |
| 82 | Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the rooftill RCC slab and roughining the surface , and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed . |
| 83 | Material and labourfor PCC 1:2:4type B-0 using 12.5 mm graded stone aggregate filleting and benching slightly rounded/ roof slabs to fill undulations to achieve uniform slope complete all as specified and as directedby EIC |
| 84 | Material and labourfor for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even all as specified and as directed by EIC(WPC shall be measured and paid separately) |
| 85 | Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cmC/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and includingcement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal.After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed.Note:- After ascertaining the location of leakage/ seepage/dampness under item No.2 here-in-before, this item shall be operated at the required location. |
| 86 | Material and labour for roof treatment on RCCnon acceible roof slab completeas mentioned below, all as specified and as directed:-(i)Cleaning the concrete surfaces of RCC roof slabthoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampnessall as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness,pressuregrouting shall be operated at the required locations.(iii)Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm.(iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface.(v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame \"torch\", application method |
| 87 | Material and labour for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and finishing the surface apply epoxy base resin of manufacturer pidicrete and choksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site all as specified and as directed |
| 88 | Material and labour for cutting groove exc 200mm but n exc 250 mm gifth in brick or stone walls and making good the surfaces using PCC 1:2:4 type B0 in CM 1:3 after inserting water proof bituminus membrane complete all as specified and directed. |
| 89 | Supply and fixingin repair sinks made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 90 | Supply and fixing in repair waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed. |
| 91 | Taking up/down steel tubing 15 mm bore and connection including cleaning/removal to store Complete all as specified and directed. |
| 92 | All as per item No but 20 mm bore |
| 93 | Supply and fixing GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specified and directed. |
| 94 | All as per item No 93 above but20 mm dia |
| 95 | Supply and fixing 20 mm dia stop valves, cast cpper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for unions and fixed all as specified and directed. |
| 96 | Supply and fixing for 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed. |
| 97 | All as per item No 96 above but 25 mm bore |
| 98 | Repairs to RCC exposed surfaces byremoving the loose material, cleaning the reinforcmentwith rust remover & applying fosroc\"sconstruction solution (renderoc HS XTRA )bonding agent and finishing the same 20 mm thick CM (1:3) with mixing adhesive as direction of manufacturers. Note: Reinforcement to be welded to exposed reinforced if necessery. it measured& paid seperately. |
| 99 | Supply and fixingprecast oramental type POP cornices of width not exceeding 250mm on both side at the junction of wall and ceiling wall all necessary fixtures complete all as specified and directed |
| 100 | Supply and fixing in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes,channels assembly ,locking system to hide rope knot .rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. Make:- Easy dry or other equivalent make as approved by GE. |
| 101 | Supply and fixing 15mm dia fancy type chromium plated conciled angular stop valves screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or union and fixed taking down old oneall as specified and as directed by EIC |
| 102 | Material and labour for P.C.C. (1:2:4) type B-0 using 12.5 mm size graded stone aggregate with usingWPCas in sunken portion all as specified and as directed. |
| 103 | Material and labour for water proofing treatment of sunken portion of toilet,cement mix with cementitious-brushbond/RFX (or equivalent product of other company ) in the ratio of 2:1 two parts of cements and one part of mastercrete M-81 and applied in two coats @0.75 kg/sqm per coat all as per direction of manufacturer. |
| 104 | Material and labour for providing cement concrete type E2 1:5:10 (40 mm graded aggregate) as in sunken floor all as specified and directed . |
| 105 | Dismantling existing PVC water tanks exc 250 litres & n. exc 500 litres and removing in store as specified and directed |
| 106 | Supply and fixing 500 Ltr rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 107 | Supply and fixing waste coupling of PTMT suitable for 32mm bore discharge pipe (half or full threaded with minimum weight of 45gms complete as specified . |
| 108 | Supply and fixing PVC waste pipe 32mm dia fixed to waste coupling complete all as directed . |
| 109 | Supply and fixing pillar taps 15mm bore dia of pipe cast copper alloy with capstanheads; chromium plated screwed down high pressure with or without lettered HOT or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as directed. |
| 110 | Supply and fixing in repairvitreous china squatting pan of odissa pattern, long pan, size 580mmX440mm white with \"P\" or \"S\" trap, front or back inlet and integral foot rests, any pattern including removal of old one making good to floor all as specified and as directed. |
| 111 | Supply and fixing vitreous china wash basin, white, flat back, size550x400mm , white, flat back,excluding taps, waste, chain and plug andporcelainstopper but including brackets all as specified and directed . |
| 112 | Supply and fixing 15mm dia chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified and directed . |
| 113 | Supply & fixing 10 litre capacity PVC low level flushing cistern (ISI marked), white syphonic action type valve less with inlet ball valve, float and handle complete including 32mm dia PVC flush pipe and 15mm bore PVC connection 30cm long with brass nuts and washer both side and connected complete all as specified. |
| 114 | Supply and fixing 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as directed. |
| 115 | Supply and fixing CP soap dish including fixed to plugs with chromium plated brass screws all as specified and as directed |
| 116 | Supply and fixing Chromium plated shower roses with or without swevel joints andy size including fixing to steel pipe or union over head shower 120mm dia all as specified and as directed |
| 117 | Supply and fixing glass shelf22\" with brass chromium plated railling all as specified and as directed |
| 118 | Supply and fixing glazed/corner shelf with brass chromium plated railling of all as specified and as directed |
| 119 | Supply and fixing towel rail of stainless steelincluding screws and wooden /plastic cleats all as specified and as directed |
| 120 | Excavating in post holes (or similar holes) each in loose/softn exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and as directed |
| 121 | Material and labourfor for plain cement concrete(1:4:8) type D-2, using 40 mm stone aggregatein foundations,filling and mass-concrete all as specified and as directed |
| 122 | Supply and fixingPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws upto 10 to 15m height all as specified and as directed |
| 123 | Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter of roofcovering fixed with self tapping screws etc complete all as specified and directed. |
| 124 | Supply and fixingofsteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 125 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed. |
| 126 | Material and labour for broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc complete all as specified and directed. |
| 127 | Material and labour for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 100 mm thick as sub base in foundation etc all as specified and directed. |
| 128 | Material and labour for providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces even and smooth using extra cement all as specified and as directed |
| 129 | Material and labourfor for 40mm thick sand cushioning over sub base for receiving inter locking Tiles including compaction all as specified and as directed |
| 130 | Material and labourfor Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade interlocking paver block any shape and size confirming to IS 15658-2006 with grey cementand pigments over sand coushingand pointed in coloured cement to matchthe surfaces all as specified and as directed |
| 131 | Material and labourfor for providing and injecting chemical emulsion for Postconstructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed |
| 132 | Material and labour for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed |
| 133 | E/M Portion |
| 134 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and directed. |
| 135 | Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing complete all as specified and directed. |
| 136 | Material and labourforfor sub main wiring (concealed) complete with two single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 3 run of 10 sqmm & one run of PVC conduit shall be measuredas single unit |
| 137 | Material and labourforfor sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Note: 3 run of 4 sqmm & one run of PVC conduit shall be measuredas single unit |
| 138 | Material and labourforfor sub main wiring (concealed) complete with two single core 1.5 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 1.5 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.Note: 3 run of1.5 sqmm & one run of PVC conduit shall be measuredas single unit |
| 139 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed. |
| 140 | Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in wallsby cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer coverof suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.(a) One light point controlled by one switch |
| 141 | (b) One fan point controlled by one switch |
| 142 | (c) One exhaust fan point controlled by one switch. |
| 143 | (d) One bell/ buzzer point controlled by one push switch. |
| 144 | (e) One switch socket outlet modular type 3 pin 6 amp on same board. |
| 145 | (f) One light point controlled by two, two way switches, |
| 146 | All as per item No 139 above but 1.5 sq mm cable sizeand 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board. |
| 147 | All as per item No 139 above but 2.5 sq mm cable sizewith 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board. |
| 148 | Note for Item No. 139 to 146 :-(i) The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces.(ii) The quoted rate for point wiring shall deemed to be included the cost for making good. |
| 149 | Supply and fixingLED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed. |
| 150 | Supply, Installation, Testing and Commissioning of 10 WattLED Bulkhead with a nominal system lumen output of 1000 lumens and a minimum system efficiency of 100 lm/W. Make : Crompton cat no. LBHE-10-CDL or equivalent in Bajaj/ Wipro. |
| 151 | Taking down old Old u/s and Supply & Fix new master led tube 4ft20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structurehaving nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed.Make :CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro. |
| 152 | Supply and fixingSurface mounting LED Luminaries and1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmmsize complete all as specified and as directed . |
| 153 | Supply and fixingSurface mounting LED Luminariesmirror light 9 Watt, 3 in 1 color LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmmsize complete all as specified and as directed .Make: Luker Cat No : LM3Cor equivalent in CG/Phillips/ Wipro/ Bajaj |
| 154 | Supply and fixing0-4 step, one module,modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.Make : Legrand Cat No. 675531or equivalent in Havells/ Anchor |
| 155 | Supply and fixingcalling bell ding dong type , AC,single pole one way 230 volts all as specified and as directed. |
| 156 | Supply and fixing bell push switch, modular type, 6 Amps, 1 module, 230 volts all as specified and as directed .Make : legrand Cat No. 675504 or equivalent in Havells/ Anchor |
| 157 | Supply and fixing switch modular type single pole two way 6 amps 230 volts, all as specified and as directed.Make : Legrand Cat No 675502 or equivalent in Havells/ Anchor |
| 158 | Supply and fixing Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Havells/ Anchor |
| 159 | Supply and fixingsocket modular type6 Amps 3 pin 2 module230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Havells/ Anchor |
| 160 | Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. |
| 161 | Supply and fixingsocket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Havells/ Anchor |
| 162 | Supply and fixingswitch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Havells/ Anchor |
| 163 | Supply and fix power unit with 25A SP MCB alongwith 16 A Plugfor AC upto 2 ton, 3 module, 240 volts all as specified and directed. Make: Legrand cat No 6811 28 or equivalent in Havells/ Anchor |
| 164 | Supply and fixing sheet metal enclosures for DB\"s for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old Old u/s TPN DB,all as specified and as directed.Make : Legrand Cat No 507670 or equivalent in Havells/ Anchor |
| 165 | Supply and fixingMCB TPN, 40-63 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. Make : Legrand Cat No. 408683 or equivalent in Havells/ Anchor |
| 166 | Supply and fixing sheet metal enclosures for SPN DB\"s with metal double door for incorporating MCBs,IP-43 , 12 way, 240 volts, as per IS-8623 all as specified and as directed.Make : Legrand Cat No 507612 or equivalent in Havells/ Anchor |
| 167 | Supply and fixing sheet metal enclosures for SPN DB\"s 2 way, 240 volts, as per IS-8623 all as specified and as directed. |
| 168 | Supply and fixing MCB SPN, 6-32 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.all as specified and as directed.Make : Legrand Cat No. 408617 or equivalent in Havells/ Anchor |
| 169 | Supply and fixingMCB SP 6-32Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. |
| 170 | Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store all as specified and as directed. |
| 171 | Supply and fixingEnergy saving ceiling fan 1200 mm sweep min air delivery 210 CFMwith double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire ofsize 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. |
| 172 | Taking down Exhaust fan of any size and any make,cable end, dismantling the fan blade and deposit the same to store all as apecified and as directed. |
| 173 | Supply & Fixing New Exhaust fan PVC body 10\" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. |
| 174 | Taking down old unsv geyser and depositing it to E/M storecomplete all as specefied and directed. |
| 175 | Supply & Fixing, testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflectoralongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed . |
| 176 | Supply and fix gun metal gobe or gate valve with iron wheel head screwed both ends for iron pipe of size 40 mm dia and fixed on pipecomplete all as specified and directed. |
| 177 | All as per item No 175 above but 20 mm dia. |
| 178 | Supply andlayingnew GI tube, 40 mm dia, medium grade with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection. |
| 179 | Cutting & screwingexisting steel/ PPRtubing of size 20 to 100 mm dia for alterations or additions or lengthening screw on pipe to form connector and done in position without taking down all as specified and directed. |
| 180 | Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of pipe line , poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed. |
| 181 | Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed. |
| 182 | Material and labourfor for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade withstranded aluminum conductor of size 50 sqmm3.5 Core all as per IS , specified & directed. |
| 183 | Excavationin trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation,laying of cable or pipe ( where provided for protection of cable or fixing with poles and stays) and getting out in any type of soilincluding trimming the sides and forming bottom surfaces to required levelscomplete all as specified and directed. |
| 184 | Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exec. 1.5 mtr above the starting point of any type of soil completed all as specified and directed. |
| 185 | Material and labour for boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends all specified and directed |
| 186 | Material and labourforfor high density polyethylene pipes (HDPE) DWC duct pipe of size 90 mm dia laid in trenches for passing of LT cable complete all as specified and directed. |
| 187 | Material and labourforfor earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point all as specified and as directed.Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
