|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/loose soil. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out of Soft/loose soil complete all specified and directed. |
| 3 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Soft/loose soil |
| 4 | M&L for earth filling backside wall along with floor ingincluding spreading and levelling including watering well raming etc. in layer and exc25cm thick and rough excavated material exc.1.50km but nexc.5km and depositing where directed. |
| 5 | M & L Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) |
| 6 | M&L for Cement concrete in foundations, Type B2 1:2:4 (40 mmgraded aggregate) filling and massconcrete complete all specified and directed. |
| 7 | M&L for Brickwork with subclass ‘A’ bricks, straight or curved on plan exc 6m mean radius built in cement motar 1:6 complete all specified and directed. |
| 8 | M&L for 12mm thick cement plastring in 1:6 cement motar on fair faces of brick work or concrete surface finished even and smooth without using extra cement on surface complete allspecified and directed. |
| 9 | M&L for cement paint i.e.two coat of exterior emulson paint andpreparation of newly plastered surface outside complete all specified and directed by E/I. |
| 10 | Supply & Spreadingbroken brick of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface complete in all respect as specified |
| 11 | M&Lfor75mmthickCementconcretetypeB 0, 1:2:4(12.5mmgradedaggregate) for c.c. flooring complete all specified and directed. |
| 12 | M&L for Preparation of New steel and iron surface of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over coat of red oxide primercomplete all specified and directed. |
| 13 | Supplied and fixed with thickness of laths in 1.25mm thick of Steel rolling shutters, withoutball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:push pull or manual type complete all specified and directed. |
| 14 | S&F Ball bearing for rolling shutters |
| 15 | S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240as specified complete all. |
| 16 | S & F of Mild steel plates, plain or chequered, 5mm thickincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240as specified complete all. |
| 17 | S & F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofovering/cladding to wall, fixed with selftapping screws as specified complete all. |
| 18 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete allspecified and directed |
| 19 | S&F of precast cement concrete Type B1 1:2:4 (20mmgraded aggregate)coverslabs (formanholesetc.)jointedincementmortar 1:6 etc . complete in all respect as specified. |
