|
| 1 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . |
| 2 | The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS:6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS:11551 complete with protective Gel coat U/V coating on Top for complete resistance from theextreme of temperature, weather & sunlight. Note - Only plan area of chajjas shall be measured for making payment |
| 3 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). |
| 4 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 6 | 10 x 120 mm |
| 7 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 8 | 40 mm thick with 20 mm nominal size stone aggregate |
| 9 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. |
| 10 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design |
| 11 | In 75x75 mm deep chase |
| 12 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 13 | 75 mm diameter |
| 14 | 110 mm diameter |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 16 | Single tee with door |
| 17 | 75x75x75 mm |
| 18 | 110x110x110 mm |
| 19 | Bend 87.5° |
| 20 | 75 mm bend |
| 21 | 110 mm bend |
| 22 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 23 | 75 mm |
| 24 | 110 mm |
| 25 | 12 mm cement plaster of mix : |
| 26 | 1:6 (1 cement: 6 coarse sand) |
| 27 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 28 | 1:6 (1 cement: 6 coarse sand) |
| 29 | 20 mm cement plaster 1:2 (1 cement: 2 stone dust) |
| 30 | Finishing walls with water proofing cement paint of required shade : |
| 31 | New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 33 | Two or more coats on new work. |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 35 | One or more coats on old work. |
| 36 | Finishing walls with water proofing cement paint of required shade : |
| 37 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 38 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 39 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 40 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 41 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 42 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 43 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 44 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 45 | Of area 3 sq. metres and below |
| 46 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 47 | 75 to 80 mm dia pipe. |
| 48 | 100 mm dia pipe |
| 49 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 50 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 51 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: |
| 52 | Old Unserviceable C.I./G.I./M.S. Items |
| 53 | PVC Items |
| 54 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 55 | 25 mm average thickness |
