Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | B&R PORTION:Taking down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal from site complete all as specified and directed. |
| 2 | Taking down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal from site complete all as specified and directed. |
| 3 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed. |
| 4 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed. |
| 5 | S&F 20 mm dia Brass Elbow complete all as specified and directed. |
| 6 | S&F Union 16 / 20 mm complete all as specified and directed. |
| 7 | S&F 20 mm dia Brass Tee complete all as specified and directed. |
| 8 | Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fitings by burning out lead joints etc complete all as specified and directed. |
| 9 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in soil/waste pipes complete all as specified and directed. |
| 10 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in soil/waste pipes complete all as specified and directed. |
| 11 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in soil/waste pipes complete all as specified and directed. |
| 12 | S&F PVC (SWR) bends of any radius for 110mm bore complete all as specified and directed. |
| 13 | S&F PVC (SWR) bends of any radius for 75mm bore complete all as specified and directed. |
| 14 | S&F PVC (SWR) junction single, (Single T) equal or unequal provided with access door for 110mm bore complete all as specified and directed. |
| 15 | S&F PVC (SWR) junction single, (Single T) equal or unequal provided with access door for 75 mm bore complete all as specified and directed. |
| 16 | S&F PVC (SWR) vent cowl 110mm complete all as specified and directed. |
| 17 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr in charge. |
| 18 | S&F 110 mm dia PVC (SWR) pipes 5 mm thick single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as specified and directed. |
| 19 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles where straps, etc.have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to FE-290 Gde-E-165 complete all as specified and directed. |
| 20 | S&F in repairs 20mm bore gun matel globe or with iron wheel, screwed both ends for iron pipes complete all as specified and directed. |
| 21 | S&F 40mm dia high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 22 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) complete all as specified and directed. |
| 23 | Taking down chowkatsor frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) complete all as specified and directed. |
| 24 | S&F Three Track Sliding powder coated Jointless aluminium Window/ ventilator of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.60mm thick and Shutter section of sizes 39.40 mm x 17.70mmx 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thicktinted glass & Including stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm with suitable handle, tower bolt/locking arrangment and fixed with aluminium wire staples Including aluminium powder coated jointless decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqmand anodized aluminium \"U\" shape channelframe work alround the grill (if required opening for handle or AC as per dirction of Engr in Charge) complete all as specified and directed by Engr in charge. |
| 25 | S&F powder coated Jointless aluminium Window (minimum thickness of powder coating 50 micron)window and ventilator shutters,side hung type without sash bars,aluminium sections weighing not less than 0.55kg/sqm incl necessary joining cleats,glazing clips,rubber packing,powder coated aluminum snap beading ,screws ,powder coated aluminium fittings such as peg stays150mm long-01no,hinges type B21 100mm long -02 no,suitable handles -01 nos etc in each shutters , rubber gasket for fixing etc complete with 5.5 mm thicktinted glass &including stailness steel wire cloth, 0.36 mm nominal dia of wire and fixed with aluminium wire staples incl provision for exhaust fan installation as required complete all as specified and directed by Engr in charge. |
| 26 | S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 125mmx65 mm(double rebate) comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete all as specified and directed by Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 100mmx50 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete all as specified and directed by Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with and incl SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19mmx6mm size steel screws etc as per manufacturer\"s specification & drawings complete all as specified and directed.Note: fixture /fittings shall be measured and paid under relevant items. |
| 29 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws and also incl magic eye lens provision for main entrance door in 1 no, complete all as specified and directed by Engineer In- Charge. Note: stainless steel butt hinges shall be paid separately |
| 30 | S&F 200 mm stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | S&F 150 mm stainless steel handles, fabricated type complete all as specified and directed. |
| 32 | S&F stainless steel Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed incl necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 33 | S&F stainless steel Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engr in charge. |
| 34 | S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 35 | S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate by Engr-in-Charge.Make: Jaquar cat part no FLR-CHR-5053N or quivalent ofparryware/ hindware. |
| 36 | S&F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock/Angle valve quarter turn including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaguar cat part no LYR-CHR-38041or quivalent of parryware/ Hindware. |
| 37 | S&F in repair 15mm bore dia CP sink mixer With 115mm long pipe connecting legs and flanges complete all as specified and directed by Engr-in-Charge. Make: jaquar/parryware/hindware. |
| 38 | S&F in repairs 15 mm dia brass chromium plated pillar tap swan neck with fly nut capstan head screwed for 15 mm bore dia of pipe complete all as specified and directed. |
| 39 | S&F in repair 32mm bore dia CP finish copper alloy bottle trap heavy complete all as specified and directed by Engr-in-Charge. Make: jaquar cat part no ALD-WHM-769L250X190 or quivalent ofparryware/ hindware. |
| 40 | S&F in repairs chromium plated AVS health faucet Jet sparyfor water closet including 15mm bore PVC connecting pipe 1.2m longwith check nut and washers complete all as specified and directed.Make: Jaguar cat part no ALD-CHR-587 or quivalent ofparryware/ hindware. |
| 41 | S&F in repairs 600 mm long C P finish CP Towel Rail D type complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair vitreous china wash hand basin white/colouredflat back or angleback typeof size 550mm x 400 mm ISI marked Ist quality in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32mm dia and PVC connection 450mm longwith PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.Make:parryware/hindware/Cera |
| 43 | S&F in repair sinks with drainage board made of SS-304 stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size( 950mmx510mm) and bowl size( 460mmx410mmx250mm).Make- Nirali cat part no-SKS054 Or equivalent in other ISI Marked complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F in repairs PVC connections 15mm size with PTMT steelnuts of length 450mm complete all as specified and directed.Make: jaquar/parryware/hindware |
| 45 | S&F in repair CP Wall mixer (wall mounted model ) 2-1 system with provisionfor overhead shower complete with 115mm long pipe connecting legs and flanges. Over headshower 105mm dia round shape singleflow (ABS bodychrome plated with gray face plate) with rubbit cleaning system complete all as specified and directed.Make: jaquar/parryware/hindware. |
| 46 | S&F in repairs 600x 450 x 6 mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastener complete all as specified and directed. |
| 47 | S&F in repairs PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed.MAKE : COMMANDER/PRAYAG/JINDAL |
| 48 | S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed. |
| 49 | S&F peg setof 6 fixedwith rawal plug complete all as specified and directed by Engr in charge.Make: Prayag Cat no BEA-30 or equivalent of make as specified in PS. |
| 50 | S&F Stainless steel Double Soap Dish with tumber holder complete all as specified and directed.Make: Cera, Parryware, Hindware |
| 51 | S&F glass made wall mounted (removable bottle) liquid Soap Dispenser complete all as specified and directed.Make: Cera, Parryware, Hindware |
| 52 | S&F in repairs stainless steel 20 mm dia 18 gauge pipe of required length for curtain rods including side brackets and bulbs complete all as specified and directed. |
| 53 | S&F Glass Shelf assembly Sheet consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 54 | S&F corner shelf (set of 03) 200mm to 300mm size5mm thick toughened glass complete all as specified and directed.Make: Paryag Cat Part no BEA 48 or equivalent of make as specified in PS. |
| 55 | S&F in repair Stainless steel plate rack made of stainless steel 1mm thick 900mmx 600mmx250mm complete all as specified and directed. |
| 56 | Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 57 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 58 | Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 59 | M&L for Granite (of any type) work, 18-20 mm thick Machine cut,(table rubbed and polished) in bases for cooking platforms, steps, jambs, pillars, window-cills incl Vertical surfaces and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite where ever required and including rounded edges with shade of granite, incl drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite, complete all as specified and directed by EIC.Notes: Minimum rate of granite should not be less than Rs. 1500/- per Sqm including GST. Work shall be got executed only after submission of original purchase vouchers |
| 60 | M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps (treads), and including 20mm thick screed bed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shades complete all as specified and directed by Engr in charge. |
| 61 | M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in riser of steps and skirting and the like and including rendering in cement mortar (1:4), 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shades complete all as specified and directed by Engr in charge. |
| 62 | Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 63 | M&L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc pointed in white or coloured type 2T adhesiveto match over incl Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing floor tiles Havingclassification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive complete all as specified and directed by Engr in charge.Note: Size,Colour and pattern of tile as approved by EICMake :- Somany or equivalent in Kajaria/Johnson etc.Note: rates includes preparation of surface for tile and chemical application. |
| 64 | M&L for Double Charged vitrified any shade and finish tiles 9-10 mm thick (rectangular) tile of size 1200mmx600mm in floors etc pointed in white or coloured type 2T adhesiveto match over incl Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing floor tiles Havingclassification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive complete all as specified and directed by Engr in charge.Note: Size,Colour and pattern of tile as approved by EIC and work to be execute through skilled labourMake: Somany or equivalent in Kajaria/Johnson etc.Note: rates includes preparation of surface for tile and chemical application complete all as specified and directed. |
| 65 | M&L for joint free super gloss/high gloss coloured tiles in vertical surface of size 600mmx300mm, 8-10mm thickpointed in white or coloured type 2T adhesiveto match over incl Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing wall tiles Havingclassification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive complete all as specified and directed. Note: Size,Colour and pattern of tile as approved by EICMake :- Somany or equivalent in Kajaria/Johnson etc.Note- rates includes preparation of surface for tile and chemical application complete all as specified and directed. |
| 66 | All as per item No 65.00 above item but in skirting only complete all as specified and directed. |
| 67 | Demolition of cement concrete (reinforced) in ground floors and upto 4 storey of any description as in kitchen slabs/shelves/old chimney etc. and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all other saftey precautions as in Chajjas RCC water tanks kitchen slabs etc complete all as specified and directed. |
| 68 | M&L for Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in slab supported on walls, beams & columns in floors, roofs complete all as specified and directed. |
| 69 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 70 | Form work to edges of concrete flats RCC/PCC and exc 5 cm but not exc 15cm complete all as specified and directed. |
| 71 | S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed. |
| 72 | All as per item No 71.00 above but 6mm to 8mm dia complete all as specified and directed. |
| 73 | S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet as complete all as specified and directed. |
| 74 | S&F in repairs ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia complete all as specified and directed. |
| 75 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 76 | M&L for Providing cement concrete type B-I,1:2:4 (20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr in charge. |
| 77 | Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed. |
| 78 | M&L for 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed.Note: SBR latex shall be measured and paid separately |
| 79 | Supply only Styrene Butadiene Rubberlatex emulsion complete all as specified and directed. |
| 80 | M&L for 15 mm thick rendering plaster on fair or other than faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 81 | M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint using roller brush (make: APEX ULTIMA oe equivalent in berger, acro ) over one coat of primer and over incl one coat of Birla putty complete all as specified and directed. |
| 82 | M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed. |
| 83 | S&F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as specified and directed. |
| 84 | M&L for 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed.Note: SBR latex shall be measured and paid separately |
| 85 | M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00mm thick Birla putty complete all as specified and directed by Engr in charge. |
| 86 | M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of Birla putty complete all as specified and directed. |
| 87 | M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed. |
| 88 | M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of Exterior Emulsion paint(APEX ULTIMA) using roller brush over one coat of primer and over incl one coat of Birla putty complete all as specified and directed. |
| 89 | M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed. |
| 90 | Dismantling loose concrete cover by chiselling from RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and steel scaffolding is provided and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat.Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site (Welded mesh & addl reinforcement if required measured and paid separetly) complete all as specified and directed.Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosingaffected area by green cloth) up to Four storey building.WPC shall be measured and paid seperately. |
| 91 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 92 | S&F in repair Vitreous China wash down water closet pan with seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified and directed.Make: Cera/ Hindware/ Parryware |
| 93 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CPFlush pipe of Low level cistern complete all as specified and directed by Engr in charge.Make: Cera/ Hindware/ Parryware |
| 94 | S&F WPC Cup Board made of 18 mm thick for hold of shelf / partition/back /kitchen top shelf and shall provide 3 edges in sizes as per required length.theedgesof shelf / partition / wall side to be lipped with 18 mm with upto 14micron thick Prelam and WPC sheet of density Upto 750 Kg /cbm manfactured by as per ISO -9000 certified company (incl prelmake - Greenlam,Merino or equivalent of approved brand) , using solvent cement fixed with screws to timber frame work etc.( including all necessary Aluminium hardware fitting i.e fixing with soft closing hydraulic hinges, 4 handles, ball catchers including locking arrangement in Cup board including dismantling of old sheet complete all as specified and directed.Note: measurement should be taken external face only i.e. length and breadth Make- Rajshree,Century,Giza or equivalent of approved make |
| 95 | S&F stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make - Hettich/Haffele or equivalent in others to cupboard shutters of kitchen cabinets with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 96 | S&F Kitchen cabinets made out of WPC sheet board 18mm thick including making drawers, partitions, shelves and WPC board on all sides with following specifications complete all as specified and directed by Engineer-in-charge as following:-(a) 18 mm thick WPC solid flush board with 14 micron thick pre-laminated sheet fixed on one side, as front face/shutter of kitchen cabinet. (b) Frame of size 50mmx47mm. (c) Shutters having soft closing hydraulic hingesmake - Hettich/Haffele and ss304 handle 75mm long 01 No for each shutter. (Note- only payment of hydraulic hinges shall be paid seperately in each nos)(d) Bottom, back and sides of cabinet covered with 18 mm thick WPC board 14 micron thick pre-laminated sheet fixed on one side. (e) Drawers having ss304 handle 75mm long and two long sliding rails for each drawers with magnetic catcher as required. (f) Each Cabinet must have one drawers supported of sliding rails and having locking arrangement in one.(g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and0.60 M depth.(h) Measurement will be considered only for front face i.e. length & height & depth 0.60m.(j) SS304 jali baskets mounted on each drawer channel incl all baskets i.e. pullout,wire,corner,plate,plain,bottle,cutlery basket of approved make(minimum 6 no of basket in one kitchen)Note: Measurement for purpose of payment shall be made on external visible face for width x height (considering frame). |
| 97 | Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyondout side MOD land complete all as specified and directed. |
| 98 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 99 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including cleaning the surface thoroughly and removing the demolition material out side the MOD land beyond 1.5km away complete all as specified and directed. |
| 100 | M&L for cement concrete of 25mm thick 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to five stories of Bldg, using water proofing compound as per manufacturer instruction complete all as specified and directed.Note:- Water proofing compound shall be measured and paid separately. |
| 101 | M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 102 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen [email protected] kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints over 10mm thick plaster in cement mortar 1:4 complete all as specified and directed by Engineer in charge.Make: Ms Asian Paints Ltd/ Ms STP Ltd/ Ms Torch Tar and Bitumen Products Pvt Ltd/ Ms IWL India Ltd |
| 103 | M&L for non skid roof tiles with cooling properties of size 300x300 mm and 8-10mm thick with solar reflective index (SRI) value upto 98% .Make- Orientbell/Somany/Kajaria Cat part no. Orient cool tiles (EC) Bianco or equivalent including Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing exterior roof tiles Havingclassification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive complete all as specified and directed by engineer in charge.Note- rates includes preparation of surface for tile and chemical application. |
| 104 | S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door for 110 mm bore complete all as specified and directed. |
| 105 | S&F in repairs 15 mm dia brass chromium plated Bib tap fency type chromium plated complete all as specified and directed. |
| 106 | M&L for 75mm thick PCC 1:3:6, type C-2 (40 mm agg) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel workofanydescriptionnot otherwise provided for complete all as specified and directed. |
| 108 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walkways; railings for balcony and parapet; Framed work rolled section as in framing compound girder staging for water tank,cooler stand as and the like built up from two or more beam or channel section or angles with plates stiffeners etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 109 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 110 | M&L for cement concrete in filling mass for sunken concrete type B1,1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 111 | E&M PORTION:Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed by Engr in charge. |
| 112 | M&L for point wiringwith PVC insulated unsheathedmulti strandedFRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed.Note: (i)Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii)No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion. |
| 113 | All as per item No 112.00 above but for One light point controlled by two way 5 Amp switches complete all as specified and directed. |
| 114 | All as per item No 112.00 above but for One bell/buzzer point controlled by one bell push complete all as specified and directed. |
| 115 | All as per item No 112.00 above but for One three pin 5 Amp socket outlet point controlled by one no, oneway switch on same board complete all as specified and directed. |
| 116 | All as per item No 112.00 above but for One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board complete all as specified and directed. |
| 117 | S&F in replacement of modular Switch 6 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and directedMake: Legrand CAT Part No.573400, Havells (Murano) CAT Part No. ACUSXXW101, Schneider cat part No -X1101WH |
| 118 | S&F in replacement of modular switch single pole, two way6 amps, 230 Volts (ISI marked) complete all as specified and directed.Make :Legrand CAT Part No.573402, Havells (Murano) CAT Part No. ACMSXXW062, Schneider cat part No- X1002WH |
| 119 | S&F in replacement of modular bell push 6 amps complete all as specified and directed.Make : Havells (Murano) Cat part No-ACUSBXW101, Legrand Cat Part No-673404, Indoasian Cat part No-810615 |
| 120 | S&F in replacement of 16 Amp rating modular switch one way one module complete all as specified and directed.Make: Legrand CAT Part No. 573410, Havells CAT Part No. ACUSXXW161, Schneider Cat Part No -X1101WH |
| 121 | S&F in replacement of modular socket out let 230 volts grade (as catered in point wiring above) 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.Make: Legrand CAT Part No. 573470, Havells CAT Part No. ACUKXXW063, Schneider Cat Part No -X2005WH |
| 122 | S&F in replacement of modular socket out let230 volts grade (as catered in point wiring above) 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.Make: Legrand CAT Part No.573471, Havells CAT Part No. ACUKCXW163, Schneider Cat Part No -X2106WH |
| 123 | S&F in replacement of electric bellAC 230 Volt complete all as specified and directed.Make : Indoasian Cat part No 810643 or equivalent in Havells/Legrand |
| 124 | S&F in replacement of ceiling rose 3 terminal / PVC insulated body ISI Marked complete all as specified and directed. |
| 125 | S&F in replacement of Modular MCB SP 16 Amps 240V 3 KA, C Curve, fitted in main switch board, including 2.5 sqmm wire connecting socket & modular MCB complete complete all as specified and directed.Make: Havells Cat No. DCRNCSPA016, LK (L&T) Cat part No CB93101KW16, Schneider Cat part No P8016-N. |
| 126 | S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly including PVC concealed conduit 20 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets complete all as specified and directed.Make : RR KABEL/Polycab/Havells |
| 127 | S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 6 sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make : RR KABEL/Polycab/Havells |
| 128 | S&F in replacement of factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.Make:- L&T (LK) Cat part No L&T BH112DDB, Legrand Cat part No EKINOX 507612, Schneider Cat part No A9HSND12. |
| 129 | S&F in replacement of MCB, SP 6 to 32 Amps, 240V 10KA \"B\"/\"C\" curve as per direction of Engr-In-Charge in the MCB DB complete with connection testing complete all as specified and directed.Make : Make is same as the make of Distribution board. |
| 130 | All as per item No 129.00 above but for MCB SP 40 Amps complete all as specified and directed. |
| 131 | All as per item No 129.00 above but for MCB DP 32 Amps complete all as specified and directed. |
| 132 | M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25x4 mm up to 7.50 RM bolted (with GI nuts, bolts & check nuts) and rivetedto earth (Plate) electrode at one end and connected to main switch board / test point (including test point) at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0using 12 mmgraded crushed stone aggregate, RCC cover, funnel, wire mesh etc including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified and directed. |
| 133 | S&F in replacment earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or burid in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing as required 25x4 mm galvanised iron strip complete all as specified and directed by Engr in charge. |
| 134 | S&F in replacement ofLED Tube Light of 20 Watt230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat Part No CCS-100-20-65-HL2-OP-NWH, Phillips Cat Part No BN308C LED20S-6500 L120 PSU WH. |
| 135 | S&F in replacement ofLED Tube light fitting10 watt ( 2 ft ) white230 Volt AC completeincluding connecting up with three core twisted flexible copper conductorr cable complete all as specified and directed.Make:-Philips/Havells/Orient |
| 136 | S&F in replacement of aesthetically designed muziris decorative warm white LED pictur light of07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and directed.Make : Philips cat part No/Model-31402 or equivalent model in CG/Bajaj. |
| 137 | S&F in replacement of aesthetically designed Wall mounteddecorativeLED light of9 Wfixture with spun aluminium base, stainless steel arm, spun aluminium holder cap, CRCA sheet back plate, frosted glass diffusercomplete all as specified and directed.Make : Philips Cat part No Muziris 31434, Lustre Cat Part No Li-3636/1W, Wipro Cat Part No. BW06. |
| 138 | S&F in replacement of LED Bulkhead fitting of 10 Watt230 Volt ,complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed.Make : Philips Cat Part No 929003670701CERCO, Crompton Cat Part No LCDSPLN-R-12-CDL, Panasonic Cat Part No PPAM16127 |
| 139 | S&F in replacement of remote controlledBLDC Ceiling fan having minimum CMM 220, complete with blades, down rods and all connected accessories operating at 230 V with 1200 mmsweep, rated 5 star with brushless direct curent (BLDC) motor, color as per site requirement. Making arrangement for hanging fans to ceiling with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-In-Charge.Make: Havells Cat Part No Ambrose Slim star 1200, Orient Cat Part No ECHOTECH Prime, Bajaj Cat Part No Bajaj Ethora Plus.Note:-The old U/S1200/1400mm sweep ceiling fan to be deposited to MES store yard in safe custody. |
| 140 | S&F in replacement Exhaust Fan, AC Single phase, 230/240 Volt of size 300 mm, Minimum CMH-1600, metal body, high efficiency motor, dynamically balanced blade for better performancxe and corrosion resistant powder coated metallic finish including hole making (if necessary), complete with louvers frame and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed.Make:- Havells VENTILAIR DB, Bajaj - Max Air, Crompton-TRANS AIR.Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody. |
| 141 | S&F in replacement of of plastic body fresh air fan of size 250 mm sweep with new plastic body fresh air fan 250mm AC single phase 230 V 50 HZ with blades,frame ,louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the fresh air fan with proper nut bolt complete all as specified and directed.Make: Crompton Brisk Air Neo, Bajaj - Maxima DXL, Havells-Ventilair DX.Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody. |
| 142 | S&F in replacement hot water storage electric water heater, steel body with stainless steel inner tank and heating element upto 2.0 KW capacity 25 litre, BEE 5 Star rated Mg anode rode, IPX4 high strength polymer body complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.Note : The contractor needs to submit manufacturing warranty of geyser of minimum two years to Engineer-in-Charge. Old unsv geyser to be deposited to MES store yard in safe custody.Make : Bajaj Armour series pentacle, Havells Adonia Spin, Crompton Solarium CARE. |
| 143 | S&F in replacement of factory made load line DB\"s double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody.Make : Legrand Cat part No 507725, L&T (LK) Cat part No PHV304DDB, Schneider A9HVM04L. |
| 144 | S&Fin replacement ofMCCB 4 pole 100 Amp, 415 Volts ,16kA adjustable type including thimbles, nuts, bolts ,washers etc. and connections Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody.Make : Legrand / L&T (LK)/ Schneider. |
| 145 | S&F in replacement of Building security/ street light fitting 25 wattincluding GI bracket of suitable size,fixing with clamp and other connected accessories Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody.Make: Crompton/Philips/Havells.Note: (a) Srl Item No 03.00, 04.00, 24.00 to 29.00, 35.00 to 43.00, 45.00, 52.00, 55.00, 59.00 to 61.00, 63.00 to 66.00, 73.00, 78.00 to 82.00, 87.00, 88.00, 94.00 to 96.00, 102.00, 103.00, 112.00, 117.00, 126.00 to 128.00, 134.00, 137.00, 139.00 to 142.00 of BOQ and all bathroom fittings and sanitary items are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
