|
| 1 | Cleaning of grass, vegetation growth/saplings growth after uprooting from roof top completely incl making good disturbed sutrcafe in CM 1:4 complete to match the existing all as specified and directed. |
| 2 | Taking down existing roof treatment of any description incl mud phuksha or PCC pedding if any (any no of layers) incl brick tiles , terracing tiles if any including removal to dabries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as directed. |
| 3 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mub stop/leveling course on existingroof or sunken floor of toilet portion, rounded and chamfered on edges, complete all as spd and directed |
| 4 | M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth with WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in per bag of cement. |
| 5 | Liquid water proofing compound |
| 6 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water complete.(b) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 150 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. |
| 7 | (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane.(f)APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0complete. |
| 8 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete in all respect as specified and directed. |
| 9 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified. |
| 10 | M&L for hardcore of broken bricks of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rolled/rammed to a true surface complete all as specified and directed. |
| 11 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone agg) as in Sub-base to floor finishes. |
| 12 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick,with grey cement and no pigments set, jointed and pointed in neat cement slurry in floors incl 20 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 13 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GEcomplete all as specified and directed. |
| 14 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching,floor by maintaing required gradient/undulation etc slightly rounded or chamferred angles and throating, complte all as specified and directed. |
| 15 | Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering. |
| 16 | Dismantling timber scantlings 40 sq. cm and over in section, in framed work and in any position |
| 17 | S&F tubular framed steel trusses made out of MS medium grade tube (ERW or induction butt welded) conforming to I. S.1161-1979 grade St.-240 quality \"A\", including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpaas in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 19 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpaas in Ridge/roof covering , fixed with self tapping screws as specified. |
| 20 | Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises |
| 21 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, including cement mortar bedding complete allas spd & directed. |
| 22 | M&L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 23 | Roughening surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust etc.and applyingbrushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified and as directed. |
| 24 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified. |
| 25 | M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, incl taking down existing finished complete all as specified. |
| 26 | S&FRotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 27 | S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling including taking up or down steel tubing and connections incl cleaning for refixing and removal to stores etc complete all all as specified. |
| 28 | S&F in repair Bib tap 15 mm bore long body, Brass CP, fancy type (long shank) with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified. |
| 29 | S&F in reapir Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cupscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore andcomplete all as specified. |
| 30 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete. |
| 31 | S&F in repair, Vitreous china squatting pan of pattern, long pan, \"Orissa pattern\", size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complee |
| 32 | S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m longLongFlexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 33 | S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 34 | S&Fin repairsVitreous china wash basin, flate back white of,size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand including 32 mm bore CP waste pipe long screw thread and 32 mm diaflexible waste pipe incl fixing of pillars tapsall as spd and directed. |
| 35 | S&F,PVC connection 15 mm bore with PTMT nuts of length 450 mm long. |
| 36 | Taking down door chowkats or frames not exc. 1.5 sqm each without taking off shutters from the frame Complete all as spd & directed. |
| 37 | Taking down door chowkats or frames exc. 1.5 sqmbut not exc. 4 sqm each without taking off shutters from the frame complete all as spd & directed. |
| 38 | S&F Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate.incl tarring/black bituminous paint to unexposed surface, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately. |
| 39 | M&L for PCC (1:3:6) type C-0 using 12.50mm graded crushed stone aggregate as in back filling of chowkhat |
| 40 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 41 | M&L for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed. |
| 42 | M&L for 35mm thick 2ndclass hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed. |
| 43 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at sitecomplete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow\" section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill10 mm sq bar includingtwo coat of synthetic enamel paint overonecoat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, includingplain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as specified and directed. |
| 45 | S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 46 | S&F aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed. |
| 47 | S&F anodised aluminium handle cast type 125 mm size complete all as specified & directed. |
| 48 | S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame. |
| 49 | M&L for preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer. |
| 50 | M&L for Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shadeover one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfacesComplete all as specified and as directed by the Engineer-in-charge. |
| 51 | S&F Stainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples. |
| 52 | Hacking out old broken glass (any thickness, size, quality or description) from matel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onces exc 1.5 Sqm |
| 53 | S&F, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqmin each pane, complete all as specified and directed. |
| 54 | Taking down existing Rolling shutter and refixing to same opening after repairing,easing and adjusting incl replacement of ball bearings,anchoring rod, gear box and crank handle, safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 55 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion(Posts embedded in Concrete, brick work,masonry, etc).and making good disturbed groundof any description complete all as specified and as directed by the Engineer-in-charge. |
| 56 | Dismantling existing barbed wire fencing of any description, shape etc complete all as specified and directed. |
| 57 | Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil all as specified & directed. |
| 58 | M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stoneaggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 59 | M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape, drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -165 incl two coat of synthetic enamel paint over a coat of red oxide primerall as directed |
| 60 | S&F chain link fencing incl line wires, any mesh size 75mm x 75mm mesh & 4.00 mm dia of wire and any type of standards, rails, straining bolts etc including provn of binding wire, chain link MS galvanised medium coated as per IS 4826 fencingcomplete all as specified. |
| 61 | S&F galvanised medium coated as per IS -4826, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel complete all as specified and directed. |
| 62 | S&F as in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. Complete all as specified and as directed by the Engineer-in-charge.(each line of wire to be measured. |
| 63 | Fixing only as in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line ofwire to be measured. |
| 64 | S&Fin repair Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, confirming to Fe-290 Gde E-165, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 65 | S&F Mild steel, plain, black sheet of 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. |
| 66 | Demolition of brick or stone / concrete block/ stone boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as spd. |
| 67 | M&Lburnt clay brick work with sub-class \"B\" bricks,(old size) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 68 | All as per srl item No. 66 here-in-before but except brick, complete all as specifed |
| 69 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 70 | M&L for 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:6) brick or concrete surfaces and finished even and smooth without using extra cement all as specified. |
| 71 | M&L for10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement all as specified. |
| 72 | M&L for5 mm thick rendering in cement mortar (1:3) on ceilingsurfaces and finished even and smooth without using extra cement all as specified. |
| 73 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging/chajjas/ /roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement. |
| 74 | M&L for preparation of new plastered surfaces of Walls by applying 1mm thick wall care putty to make the surface even and smooth and applying two coat of cement based paint complete all as specified & directed. |
| 75 | M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty any nos of coats to receive true smooth and applying two coat of oil emulsiondistemper complete all as specified & directed. |
| 76 | M&L for three coat of white wash on newly plaster surface of ceiling including preparation of surface all as specified and directed. |
| 77 | M&L for Preparation of old plastered surfacesby scrapping down smoke roots, moulds salts and treading oil and greasy spotswith wire brush incl removing all nails & washing down and applying one coat of washable Distemper on wall , white or tinted complete all as specified & directed. |
| 78 | M&L for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl corniceswashing down with water etc and applying one coat of Cement Base Paint , white or tinted complete incl removing grass, vegetations or small trees etc and making the good disturbed surface in CM 1:3 all as specified & directed. |
| 79 | M&L for prepration of old steel surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified. |
| 80 | M&L for preparation of old wooden surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified. |
| 81 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 31,726.00 and any other reduction if any from quoted amount. |
