Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolation of cement concrete of anydescription and in any position not otherwise specifically provided for as specified and directed. |
| 3 | Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as directed. |
| 4 | Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings complete all as specified and as directed. |
| 5 | Dismantlingmild steel work of any description not otherwise provided for as specified and directed. |
| 6 | Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover filletscomplete all as directed. |
| 7 | Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position all as specified and directed. |
| 8 | M&L 2nd class hard wood in scantling clean sawn and unframed timber complete all as specified and as directed. |
| 9 | Dismantling of brick work or stone/boulder masonary built in cement mortar includingashlar facing dressed stone and pre-cast concrete articlescomplete all as specified and directed |
| 10 | Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed. |
| 11 | Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed. |
| 12 | Taking downshutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm complete all as specified and directed. |
| 13 | Dismantling of PVC pipes(110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, trapsetc complete all as specified and directed. |
| 14 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed. |
| 15 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed. |
| 16 | S&F PVC (SWR) junction double, (double T), equal or unequalof 110mm bore complete all as specified and as directed. |
| 17 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 18 | S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 19 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed. |
| 20 | Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and as directed. |
| 21 | M & L for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm etc complete all as specified and as directed. |
| 22 | M & L for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders complete all as specified and as directed. |
| 23 | M&L for cement concrete1:2:4 type B-Iusing 20 mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbsand the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork complete all as specified. |
| 24 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 25 | M&L for Brickwork with flyash bricks, straight or curvedon plan to any radius in half brick thick walls,built in, built in cement mortar (1:6) complete all as specified and directed. |
| 26 | M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specifiedand directed. |
| 27 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation,beams, plinth beams, base for columns and mass concreteetc complete all as specifiedand directed. |
| 28 | M&L Form work to side of columns and simillar work complete all as specifiedcomplete all as specified and as directed. |
| 29 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specifiedand directed. |
| 30 | M&l for rendering 10mm thick in cement plaster in cement mortar 1:6 , finished even and smoothwithout using extra cement complete all as specified and as directed. |
| 31 | M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and as directed. |
| 32 | Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and as directed. |
| 33 | M & L for providing 25 mm thick PCC 1:2:4 Type B-2 (using 12.5 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as directed. |
| 34 | M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. |
| 35 | M&L vitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as complete all as specified and as directed. |
| 36 | M&L vitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. |
| 37 | M&L joint free colored non skid ceramic tiles 6 to 7 mm thick(square or rectangular) area of each tilenot exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed |
| 38 | M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. |
| 39 | M&L for RCC 1:2:4 Type B1 ( 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as directed and specified. |
| 40 | M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded aggregate) ,finished fair and even without using extra cement for plinth protection and similar work complete all as specified and as directed. |
| 41 | M&L for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit complete all as specified and as directed. |
| 42 | M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) all as specified and directed |
| 43 | S&F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and as directed. |
| 44 | S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and as directed. |
| 45 | S/F Factory made solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVC\"C\" channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS framewelded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and as directed. |
| 46 | S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard woodrail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed. |
| 47 | S&F 30 mm thick second class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-I complete all as specified and as directed. |
| 48 | M&L for preparation of old /new wooden surface by rubbing surface/burning old paint and wooden polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed. |
| 49 | S&F for 150 mm aluminium handles casttype anodised complete all as specified and directed. |
| 50 | S&F for 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 51 | S&F for 300 mm brass sliding door bolts, with hasp, clips of nsheet, cast or extruded section and fixing bolts and sections and fixed complete all as specified and directed. |
| 52 | S&F for 150mm floor door stopper brass body of anodised brass body fixed complete all as specified and directed. |
| 53 | S & F 150mm longBrass, barrel tower bolt of extruded section complete all as specified and directed |
| 54 | S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified and directed |
| 55 | S&F Curtain rod with a telescopingbrackets to fit bothrod and mounting hardware modular type complete all as specified and directed. |
| 56 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 57 | S&F powder coatedaluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos ofeach door, 3 Nos of 100 mm hinges ,02 Nos of 250 mm aldorp bolt,200 mm tower bolt in each door and fitting colour match with door & aluminium snap beading screws etc complete all as specified and as directed. |
| 58 | S&F 4.8 mm thicktinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed. |
| 59 | M&L 12 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified and as directed. |
| 60 | S&F in repair Aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 61 | S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified and as directed. |
| 62 | Providing and fixing factory made uPVC white colourSliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Windowprofile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (Onevertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drillingof holes for fixing hardware and drainage of wateretc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile tobe inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)Area not exceeding 2.00 sqm each copmleted all as specified and directed. |
| 63 | Hacking out old broken glass(any thickness,size quality or description) from wooden/steelframes or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and as directed. |
| 64 | S&F figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm complete all as specified and as directed. |
| 65 | S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed. |
| 66 | S& F Galvanised mildsteel wire cloth 0.56 mmnominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and as directed. |
| 67 | Material and labour 4mm thick forNon asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screwscomplete all as specified and as directed. (Noted: Grid shall be measured seprately) |
| 68 | M&L for Gl powder coated snap grid frame work for flase ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 2mm Gl supended wire of suitable length and butter fly clip of size of main Tee shall be 32mmx 15mm x 0.30mm, crossTee shall be 32mm x 15mm x 0.30mm thick and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and as directed. |
| 69 | S&F 5 to 7mm hollow, PVC false ceiling decoratie type single side prelam PVC sheet used instead of plain colour sheet fixing at site with GI grid frame work as per manufacture instruction complete all as specified and as directed. |
| 70 | M&L for 5 to 7mm hollow, PVC Wall panellingany colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 71 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified. |
| 72 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified. |
| 73 | Supply & fix 16mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing completeall as specified. |
| 74 | Supply & fix 20mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified. |
| 75 | Supply & fix 25mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittingsand fixed to wall including taking up or down existing GI tubing complete all as specified. |
| 76 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacityhoisted and fixed in position and including dismantling water tank and removing from site complete all as specified. |
| 77 | S&F in repairs20mm bore ball brass valves. high pressure with polythenefloat and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 78 | S&F in repairs Bowlwith cistern for couple WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/S Trap-180mm/ 220mm complete all as specified and as directed. |
| 79 | S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses complete all as specified and as directed. |
| 80 | S&F in repairs 2 way bib cock with wall fange complete all as specified and as directed. |
| 81 | S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook complete all as specified and as directed. |
| 82 | S&F Towel ring squarefixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 83 | S&F Towel rail 600mm longfixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 84 | S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 85 | S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 86 | S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 87 | S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed. |
| 88 | S&F in repairs 15mm dia brass C.P fancy Type stop valves Complete all as specified and directed. |
| 89 | S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 90 | S&Fin repairsfloor trap100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed. |
| 91 | Supply & fixed in repairs Wash Hand basin ( flatback or angle back )of size 550 X 400 MM whiteincluding , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets includingsupply & fixing of waste pipe complete all as specified and as directed. |
| 92 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granitecomplete all as specified and as directed. |
| 93 | M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 94 | Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations complete all as specified and as directed. |
| 95 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 96 | S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed Complete all as specified and directed. |
| 97 | Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified and as directed. |
| 98 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 99 | Returning filling in including spreading, levelling, watering and well ramming in layers n exc. 25cm in soft/loose soil complete all as specified and directed. |
| 100 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 101 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe 150mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 102 | M&L for 150mm bore SGSW drain pipe grade A laid in trenches and jointed in CM 1:1 complete all as specified and directed. |
| 103 | Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed. |
| 104 | M&L 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed. |
| 105 | M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all a specified and directed. |
| 106 | S&F in repairs 18/19mm thick block board grade-I quality exterior grade commercial type fixed with screw to timber frame work with beading as required complete all as specified and directed. |
| 107 | Supply and fixstainless steelauto closing hydraulic hinges fixed with self-tapping screw as in position required and complete all as specified and directed |
| 108 | Supply and fixstainless steel modular handle 4 inch fixed with self-tapping screw as in position required and complete all as specified and directed. |
| 109 | Supply and fix magnetic catcher of size 20mmx50mm suitable for cup board shutter complete all as specified and as directed. |
| 110 | Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 111 | M&L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel complete all as specified and directed |
| 112 | M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paintcomplete all as specified and directed. |
| 113 | M&L for preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 114 | M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat ofbirla white care puttycomplete all as specified and directed |
| 115 | M&L for complete removal of existing treatmentof walls and applying two coats of oil bound distemper over a coat ofbirla white care puttycomplete all as specified and directed |
| 116 | M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of weather shield paintover a coat of primer complete all as specified and directed. |
| 117 | M&L for Preparing new plastered surface and applying two coat weather shield paint (apex) over a coat of primer complete all as specified directed. |
| 118 | Supplying and applying Asian Paints SmartCare BarrierX 2K is a hybrid epoxy modifed two component coating over complete removal of plaster / existing suraface for negative side waterproofing application with passes more than 10Bar Negative water pressure as per ASTM D 7088 , Solid Content is more than 90% ASTM D 1644and pull of adhesion of 4 Mpa ASTM D 7234. This product offers superior mechanical properties and is designed to be applied on walls, ceilings & basements where the substrate has moisture or is in damp condition complete all asspecified and directed. |
| 119 | M&L Plain Cement concrete in sub bases/pavings Type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed |
| 120 | M&L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed. |
| 121 | M&L of Machine pressed precast conctete interlocking paver block colour glossyfinishedrubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 122 | M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified. |
| 123 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed. |
| 124 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed. |
| 125 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation complete all as specified and directed. |
| 126 | Removing building materials etc.to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 127 | M&L for hardcore of gauge not exceeding 63mm (Broken stone or boulders ) ,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed. |
| 128 | Taking down point wiring of any type (copper/aluminum), light fittings of any type and any size, switches, sockets, regulators, bell push, call bell, ceiling rose, switch boards, etc and making good to the disturbed surfaces of walls/ floor including white washing/ colour washing/ distemper to match with existing finishes, complete all as specified and directed. |
| 129 | M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc for one light / fan point controlled by one, one way switch.Note:- Cost of cable of size 2.5 sqmmprovided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. |
| 130 | All as per item No 129 above but one 3 pin 6 amp socket out point on the same board with other switches complete all as specified and directed. |
| 131 | All as per item No 129 above but with cable size 2.5 sqmm for One 3 pin 6 amps socket out let point on independent board. |
| 132 | All as per item No 129 above but one light point controlled by two, two way switches complete all as specified and directed. |
| 133 | As per item No 129 abovebut One bell/buzzer point controlled by one bell push complete all as specified and directed. |
| 134 | All as per item No 129 here in before but with cable size 4.0 Sq mm for one16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4.0 sqmm all as specified and directed |
| 135 | Supply & Fix modular20 Amp Heavy Duty MCB COMBO Box, 4 module with MCB SP of capacity 20 Amp, for AC complete all as specified and directed. |
| 136 | S&F for switch modular type single pole one way 6 amp 230 volts grade on top covers suitable for modular switch boxes complete all as specified and directed. |
| 137 | S&F for switch modular type two pole one way 6 amp 230 volts grade on top coverssuitable for modular switch boxes complete all as specified and directed. |
| 138 | S&F for switch modular type single pole one way 16 amp 230 volts grade on top covers suitable for modular switch boxes complete all as specified and directed. |
| 139 | S&F for socket outlet 3pin 6 amp flush mounting modular type, 230 volts grade on top coverscomplete all as specified and directed. |
| 140 | S&F for socket outlet 6 pin 16 amp multipurpose use, flush mounting modular type, 230/250 volts grade on top coverscomplete all as specified and directed. |
| 141 | Supply and fixing modular step typetwo module electronic fan regulator five step heavy duty 120 watts (BLDC support) 240 volts. complete all as specified and directed. |
| 142 | S&F for switch modular type bell push flush type, 6 amp 230 volts grade on top coverssuitable for modular switch boxes complete all as specified and directed. |
| 143 | S&F electric bell multi music type AC 230 volts single pole for AC 230V, 50 Hz ding dong type complete all as specified and directed. |
| 144 | Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified & directed. |
| 145 | Supplying and fixing LED tube light fitting 20 watt, 4 feet (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 1900 Lm, Colour temp 3000/6500K, luminous efficiency > 100 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 146 | S & F surfacemounted mirrorlight of capacity 5 watt, , 230 voltswith CRCA housing with and intregrated electronic driver with luminous efficacy not less than 120 lumen/watt connector block etc, complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor with flexible conduit of suitable sizecomplete all as specified and as directed. |
| 147 | Supply & fixfittings with surface mount /recessed mount LEDdown lighters 12 W (Round/Square), cool white/warm whiteincluding driver, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 1130 Lm, Colour temp 3000/5700K, luminous efficiency > 97 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 148 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt (Warm white/cool white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 3600 Lm, Colour temp 3000/4000K, luminous efficiency > 120 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 149 | Supplying, fixing in replacement Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser , CRI ≥ 80, PF ≥ 0.95, lumen output≥ 800 Lm, Colour temp 6500K, luminous efficiency > 80 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 150 | Supply & fixing LED building security light25 watt with pressure die-cast aluminium housing, IP 65 protection,, CRI ≥ 70, PF ≥ 0.95, lumen output≥ 2500 Lm, Colour temp 5700K, luminous efficiency > 90 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 151 | Supply and fixing Lamp holder/angle holder insulated body with black/white plate for batten fittings incl 7 watt LED Bulb complete all as specified and directed. |
| 152 | Supply and fixing in replacement of LED Inverter bulb of wattage 12 watt, Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours,complete all as specified and directed. |
| 153 | Supply and fixing wall mounted fan 400mm sweep, Energy saving, 230 Volts, 50 Hz, power consumption is less than 120 watt, 5 star rated noiseless motor operation, 2100 RPM, Air delivery 95 cum/min complete,double ball bearing, copper wound, including electrically connecting from ceiling rose/6 Amp Socket outlet to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit, complete all as specified and directed. |
| 154 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote, complete all as specified and directed. |
| 155 | Supply and fixingExhaust Fan high quality engineering plastic of size250 mm sweep (copper wound), power consumption 35 watt, 1200 RPM, Air delivery 860 cum/min, 230 V-240V, 50 HZ, noise level not more than 50 dB with approved colour and with louver shutter complete including aluminium wire net frame on the exhaust side (outer surface of wall)including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed. |
| 156 | Supply and fixing electric water heater of capacity 25 ltr, storage type, Feroglas coating inner container, Made of ultra thick super cold rolled steel plates, 0.8 MPa high working pressure, Incoloy glass coated heating elements,heating element heavy duty mag-nesium anode rod, adjustable knob for temperature setting, 230 V, 50 Hz, BEE 5 Star, Energy saving high density PUF insulation, complete with all accessories such as safety valve, thermostat,NRV, 02 Nos connection pipes (Hot & Cold) etc complete all as specified and directed. |
| 157 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 1x1.5 Sqmm (for inverter), complete all as specified and directed. |
| 158 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x4 Sqmm with earth wire of 1x4 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed. |
| 159 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x10 Sqmm with earth wire of 1x10 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed. |
| 160 | Disconnecting and taking down old unserviceabledistribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed. |
| 161 | Supply & fix in repair sheet metal enclosure Vertical TPN DB 4 way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB\"s, With and including DPX³ 160 MCCB as incomer and SP/TP MCB\"s as outgoing, Complete all as specified and directed. |
| 162 | Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 100 amp rated bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 12 way ISI marked completed all as specified and directed. |
| 163 | Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA \"C\" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 164 | Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA \"C\" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 165 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingGI wire 4mm by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 40mm borein wall/floor/andGI Pipe 20 mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I).Notes :(a)The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made.(b) PCCpit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.(c) If the testing result of earthingwork is not found satisfactory then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account. |
| 166 | Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding1.50 mtr deep and getting out, Complete all as specified and directed |
| 167 | Material and labour for sand cushioning with dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 168 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type- 1flat, size 250mm x 140mm x 40mm, complete all as specified and directed. |
| 169 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 25 sq mm 3.5 core and laid in trenches/ducts/pipe or on poles, complete all as specified and directed. |
| 170 | Supply and fix GI tubing light grade 80mm (Including cutting of roads or any others hard surfaces and making good disturbed surfaces), wall, poles including bends, sockets and other connected accessories complete all as specified and directed. |
| 171 | Material and labour for PCC Type D2 ,1:3:6by using ( 40 mm aggregatestone aggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed. |
| 172 | M&L for Cuttingout of hard standing,concrete blocks,slabs,brickwork or stone masonry (in alter nate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials with complete andmaking good to the disturbed surface by using PCC of C1, 20 mm Grade 1:3:6 up to the depth for laying of water pipe line in soil complete all as specified and directed. |
| 173 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-)Rs. 1,04,826.18] |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
