|
| 1 | Sch \"A\" Part-I (B/R works)Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L for Rendering 15 mm thick on fair faces of brick/stone work or concrete surface in CM (1:4), finished even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M & L for Rendering 10 mm thick on fair faces of brick/stone work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M & L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of colour (multi colour pattern as approved by GE) over and including a coat of primer all as directed and as approved.. |
| 5 | M & L for preparation of new plastered wall surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of primer including 1mm thick wall care putty, complete all as speicied and directed. |
| 6 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frame), complete all as specified and directed. |
| 7 | All as per Item No 6.00 here-in-before but not exceeding 1.5 Sqm each. |
| 8 | S & F Pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock & strike plate etc, complete all as specified and directed. |
| 9 | M&L for 30mm thick 2nd class hard wood plain framed panelled shutter (any No.of panels), with panels of timber flat on both sides (feather edged)or of veneered particles board medium density, wood particle board with commercial face veneers, supplied and fixed to chowkat, complete all as specified and directed. |
| 10 | M&L for 35mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain any numbers, complete all as specified and directed. |
| 11 | M & L for powder coating of any colour (Thickness or powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc, complete all as specified and directed. |
| 12 | S & F 150mm size aluminium handles,cast type, anodised, complete all as specified and directed. |
| 13 | S & F 150 mm long, aluminium,anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 14 | S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 15 | S & F 300mm, mild steel rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 16 | S & F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 17 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed. |
| 18 | M & L for preparation of new or previously untreated steel surfaces over 10cm in width or grith andapplying Two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 19 | S & F for power coated of any colour (Thickness or powder coating not less than 50 micron) aluminium anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock, etc including 65 x 39.5x 1.5 mm section for complete frame and rubber beading and glazing clips etc., complete as specified and directed.Note: Unit rate quoted shall be deemed to include for cost of glass/wiremesh rubber beading, glazing clips, neoprene packing, fittings such as handles, butt hinges, tower bolts etc. |
| 20 | S & F aluminium anodized grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed. |
| 21 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 22 | S & F 30mm width of flaps continuous (Piano) hinges, mid steel, bright finish or electro galvanished, complete all as specified and directed. |
| 23 | S & F 100mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 24 | S & F 75mm long, aluminium,anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 25 | S & F 100mm hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 26 | S & Fstainless steel curtain rod of 20mm dia including taking down existing rods, complete all as specified and directed. |
| 27 | S & F stainless steel\"T\" and \"L\" type brackets withfinials, complete all as specified and directed. |
| 28 | M&L for post ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 29 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 31 | M & L for 25mm thick cement concrete type B1 1:2:4 (using 20 mm graded stone graded) as in sub base for tiling, complete all as specified and directed. |
| 32 | M & L FOR light shade Vitrifiedcoloured with border type tiles 10 mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 15mm thick screed bed in CM(1:4) in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed. |
| 33 | All as per Item No 32.00 here-in-before but in skirting over and including 15mm thick rendering in CM (1:4). |
| 34 | M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed in Cement mortar 1:6 as in floor, complete all as specified and directed. |
| 35 | M & L for glazed ceramic coloured tiles 350 x 250 x 7mm/450 x 350 x 7mm thick with highlighter basisas on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 36 | M & L for granite work 16-18mm thick(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick screed in Cement mortar 1:4, complete all as specified and directed. |
| 37 | M & L for providing mirror polished kota stone slab flooring 18 - 20 mm thck over and including 20mm thick screed in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old tile in any type, complete all as specified and directed. |
| 38 | Providing and fixing 4mm thick designer cement fibre ceiling board in ceiling fixed with screws as per manufactures instructions (Make : Everest or equivalent) laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mm thick galvanized steel sheet & size of 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200 mm maximum centres. hangers of GI wire 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with(double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300 mm long of white colour all as per instructions including dismantling of old ceiling of any type, complete all as specified and directed. |
| 39 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 40 | Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed. |
| 41 | M&L for mild steel structural steel work conforming to Fe 410 - S incl tubular members as in main and cross beams, hip and jack rafter; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and painted with a shop coat of zinc chromate primer before hoisting and fixing in position, complete all as specified and directed. |
| 42 | S & F Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 43 | S & F Pre - painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 44 | Demolition of Brickwork or stone/bou-lder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 45 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built inCM 1:6, complete all as speified and as directed |
| 46 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing, complete all as specified and directed. |
| 47 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing, complete all as specified and directed. |
| 48 | S & F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing, complete all as specified and directed. |
| 49 | S & F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing, complete all as specified and directed. |
| 50 | Dismantling waterstorage tank of capacity exc 500ltr but not exceeding 1000 ltr and removing to store, complete all as spcified and directed. |
| 51 | S & F rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position incl all necessary accessories as per the site requirement, complete all as specified and directed. |
| 52 | S & F in repairs for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed, complete all as specified and directed. |
| 53 | S & F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed. |
| 54 | S & F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed. |
| 55 | S & F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 56 | S & F in repairs Vitreous China Wash hand basin white, flat back, size 630x450mm sizeincluding cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed. |
| 57 | S & F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed. |
| 58 | S & F inrepairs 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 59 | S&F in repair PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting, complete all as specified and directed. |
| 60 | S & F in repairs 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 61 | S&F in repair 600 x 450 mm bevelled edge mirrior of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 62 | S & F PVC connection pipe 15mm dia with PTMT nuts of length 600mm long, complete all as specified and directed. |
| 63 | S&F in repairs 15mm dia CP angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, complete all as specified and directed. |
| 64 | S & F in repair CP brass Towel Ring, complete all as specified and directed. |
| 65 | S & F soap dish, chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws, complete all as specified and directed. |
| 66 | S & FCI floor trap of 75mm and CP grating suitable for 75 mm bore floor trap and fixed with white cement, complete all as specified and directed. |
| 67 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall, complete all as specified and directed. |
| 68 | S & F in repair 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed. |
| 69 | M & L for 75mm thick cement concrete 1:3:6 type C2, (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight), complete all as specified and directed. |
| 70 | M & L for extra for forming fair finshed drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends, complete all as specified and as directed. |
| 71 | Demolition of Concrete in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed |
| 72 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and mass concrete, complete all as specified and directed. |
| 73 | M & L for 100mm thick PCC type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub bases for floor, complete all as specified and directed. |
| 74 | M & L for 40mm thick PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in floors in alternate panels using 3mm thick and 38mm wide glass strip, finished the surface even and smooth with using extra cement, complete all as specified and directed. |
| 75 | M & L for colored chequered cement concrete tiles of size 300x300x25 mm thick with grey cement and pigment laid over and including 20mm thick cement screed bed in cemen t mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor including dismantling of old tiles incl cement mortar beddingand removing rubbish off the premises, complete all as specified and directed. |
| 76 | M & L for providing plain cementconcrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required, complete all as specified and directed. |
| 77 | M & L for 75mm thick cement concrete Type C2 1:3:6 (using 40 mm graded stone graded stone aggregate) as in sub base for tilingincluding demolition of old cement concrete, complete all as specified and directed. |
| 78 | Demolition of reinforcement cement concrete in roofs, beams, staircase, chajjas and similar suspended work, complete all as specified and directed. |
| 79 | M & L for reinforcement cement concrete type B11:2:4(nominal mix) 20 mm graded stone aggregate in slab for cooking platform, supported on wall, beam and column in floors, roofs, landing, balconies, canopies, Chajjas etc, complete all as specified and directed. |
| 80 | S & FTMT bars above 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip, complete all as specified and directed. |
| 81 | M & L for form work to soffits of suspended slabs such as roof slab, floor slab, landing and similar work: not exceeding 200 mm thick (Horizontial or sloping), complete all as specified and directed. |
| 82 | M & L for walling of random rubble stone masonry uncoursed, well bonded built in cement mortar 1:6 including demolition of stone masonry, complete all as specified and directed. |
| 83 | M & L for rendering 15 mm thick in CM (1:4) with water proofing compound @ 3% by weight of cement, on brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note: Cost of WPC shall be included in above rate. |
| 84 | S & F for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as specified and directed. |
| 85 | S & F for aluminium powder coated of any colour door with one or more shuttersaluminium section weighing 0.55 kg/mincluding 5 mm thick plain/coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, alum tower bolt including mortice lock and brass door stopper, complete all as specified and directed. |
| 86 | S & F for aluminium powder coated of any colour window and ventilator withone or more shutters fixed/side hung type without sash bar, aluminium section weighing 0.55 kg/m including 5mm thick plain/coloured/frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21 100mm long, suitable handle, alum tower bolt, complete all as specified and directed. |
| 87 | S & F in repair 140mm long floor door stopper of alu alloy body and tongue with hard drawn steel spring, complete all as specified and directed. |
| 88 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, ends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 89 | S & F for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints in eaves gutters,with all fittings such as elbow, Equal Tee, coupling, \"Y\" Tee etc,.. Including MS clamp and holding arragment for MS steel, complete all as specified and directed. |
| 90 | Sch \"A\" Part-II (E/M works)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed surface of walls, floor or ceiling etc to match the existing specification, complete all as specified and directed. |
| 91 | M&L for Point wiring for one light point/fan point / One bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth leadand including PVC casing and caping medium grade with all fitting (ISI Marked) along withalong with modular sunken boxes of reqd size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified. |
| 92 | All as per item No.91 here-in-before but for socket out 5 Amps on same board. |
| 93 | All as per item No.91.00 here-in-before but for socket outlet 5 Amps on independent board. |
| 94 | All as per item No.91.00 here-in-before but for one 3 pin 15 Amp socket outlet independent with2.5 sqmm PVC insulated FRLS multistrandedcopper cable with 2.5 sqmm single core multistrandedFRLS copper cable as earthling lead. |
| 95 | S & F modular switch piano, 1 module, single pole one way 6Amp, complete all as specified and directed. |
| 96 | S & F modular switch piano, 1 module, single pole one way 16Amp, complete all as specified and directed. |
| 97 | S & F modular socket 2/3 pin, 2 module, 6A, ISI marked, 230 volts, complete all as specified and directed. |
| 98 | S & F modular socket6/16A, 6 pin, 2 module, ISI marked, 230 Volts, complete all as specified and directed. |
| 99 | S&F modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed. |
| 100 | S & F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm, complete all as specified and directed. |
| 101 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 102 | M&L for in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, all as required at site or directed. |
| 103 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 104 | Supply and fixing lamp holder insulated body, PVC/ Polycarbonate type with back plate including 15watt LED bulb, complete all as sepecified and directed. |
| 105 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as sepecified and directed. |
| 106 | Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable, complete all as sepecified and directed. |
| 107 | M&L for exhaust fan, steel body 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 450mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable, complete all as sepecified and directed. |
| 108 | M&L for exhaust fan, sturdy Engineering plastic complete with 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 109 | M&L in repair for submain wiring alongwith earth wire with 2x6.0 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 6.0 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth leadand including PVC conduit along withincluding cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified. |
| 110 | M&L in replacement for sheet metal enclosure MCB distribution board, double door TPN with IP-66 protection single phase 415 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified directed.Note:-MCBs shall be measured separately. |
| 111 | M&L in replacement for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv MCB DB, complete all as specified and directed.Note:-MCBs shall be measured separately. |
| 112 | M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv MCB DB, complete all as specified and directed.Note:-MCBs shall be measured separately. |
| 113 | M&L for MCB TPN 415 volts any rating upto 100 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed. |
| 114 | M&L for MCB single pole and neutral 240 volts any rating upto 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed. |
| 115 | S & F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA \"B\" curvein the DB complete with connection testing and commissioning, complete all as specified and directed. |
| 116 | Supply and fixing service cable 1100 volts grade 10 x 2 sqmm heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 117 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed. |
| 118 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed. |
| 119 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/loose soil, complete all as specified and directed. |
| 120 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25cm, complete all as specified and directed. |
| 121 | Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 122 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I, complete all as specified and directed.Note: Punned thickess i.e 18 cm shall be measured for payment purpose. |
| 123 | M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick, complete all as specified and as directed. |
| 124 | Supply and lay GI pipe 50mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item, complete all as specified and directed. |
| 125 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 126 | M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete includingPCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete. |
