|
| 1 | Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed. |
| 2 | Excavation in trenches exc 1.5 M n. exc 3 M depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 3 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Material and labour for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding25 cm complete all as specified and as directed. |
| 5 | Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed. |
| 6 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed. |
| 7 | Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregateas in sub base of floors including necessary form work all as specified and as directed. |
| 8 | Material and labour for precastPCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonryexceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed. |
| 9 | Material and labour for precastPCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonrynot exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 10 | Material and Labourfor RCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation footing, raft, plinth beam, brass beam, columnetc complete all as specified and as directed. |
| 11 | Materialand Labourfor RCC 1:2:4 type B1 nominal mix concrete using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed. |
| 12 | Material and labour for providing reinforced cement concrete 1:2:4 type B1 nominal mix using 20mm graded stone aggregate as inslabs supported on beams/columns etcall as specified anddirected. |
| 13 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and as directed. |
| 14 | Use and waste for form work to sides and soffits of floor or roof beams, beam haunch-ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc,fair finished flat surfaces of concrete all as specified and as directed. |
| 15 | Use and waste of formwork to sides ofpillars, post, struts, piers, coloumn and stanchions, square, rectangular or polygonal, fair finished surfaces of concrete all as specified and as directed. |
| 16 | Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 17 | Material and Labour for TMT(CRS/HCR) bars8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed. |
| 18 | Material and labour for Plain cement concrete 1:3:6, type C1, using 20mmgraded stone aggregate as in for fixing posts, bed plates, anchor blocks, corbels, brackets including necessary form work all as specified and as directed. |
| 19 | Supply and fixroof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe-410W(Gde E-250) quality Acomplete all as specified and as directed. |
| 20 | Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted or bolted or welded attachment all as specified and as directed. |
| 21 | Supply and fixing Pre- painted galvalume aluminum zinc coated corrugated sheetof 0.50mm thickness having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley guttersfixed to frame work all as per manufacturers instructions all as specified and as directed. |
| 22 | Supply and fixing Pre- painted galvalume aluminum zinc coated 0.5mm thick having tensile strength of 550 Mpa with coating thickness prepainted plain galvalume sheeting as in ridge and cladding, fixed with GI self tapping screw complete all as specified and as directed. |
| 23 | Material and labour for applying two coats of synthetic enamel paint over one coat ofred oxide/zinc primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge. |
| 25 | Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 26 | Supply and fix False ceiling with 12mm thick size 1.2m x 1.80m gypsum board sheets fixed with machine screws as per manufacture instructions and including G I channel 22 guage thick grid work main joints placed at 1.20m centre to centre cross joints placed at 450mm centre to centre, hanging with 22 gauge GI strip suspenders fromroof \"J\" hooks bolts and nuts etc and treating the Gypsum board with thin layer of Gypsumwith gypsum and hydrous binder and prepare the surface till smooth surface is achieved and applying two coat ofoil boud distemper of any patterrn and design over a coat of texture primer on ceilings sheets all complete as required as per manufacture\"s instructions and directed by the EIC1. The pattern and design shall be as directed by Engineer in charge during the execution of work.2. The exposed surface of the false ceiling shall be joint less even and smooth to receive two coats of oil bound distemper 3. The Gypsum board /sheets shall be fixed with suitable screws below the grid and shall not be placed over the grid |
| 27 | Material and Labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not excceding 0.38 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 28 | Ditto as per item No 27 abovein skirting including 10mm thick back coat in cement mortar 1:4 laid and Jointed in Neat Cement Slurry and Pointed in White cement with pigment to match the shade of the Tiles, complete all as specified and as directed.complete all as specified and directed |
| 29 | Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/rectangular)area of each tiles exceeding 0.11 Sqm but not exceeding 0.18sqm as on floors and jointed in neat cement slurry and in coloured cement to match, fixed over and including provision of screed bed/ bedding layer/backing coat of 15mm thick in CM 1:6 complete all as specified and directed. |
| 30 | Material and labour for7 to 8mm thick Glazed Ceramic Coloured Digital Tiles of Size, 300X450mm set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in CM 1:3Set and Jointed in Neat Cement Slurry and Pointed in White cement with pigment to match the shade of the Tiles, complete all as specified and as directed. |
| 31 | Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using40 mm graded stoneaggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork, complete all as specified and as directed. |
| 32 | M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing bySanding Machine and Auto Roller new plaster surface complete all as specified or as directed by Engineer-in-charge.Make: Asian Paint (Tractor)/Berger paints (Bison super) |
| 33 | Material and labour for applying two coats of cement base paint over a coat of alkali resistent primer on wall including preparation of new surface of wall complete all as specified. |
| 34 | Material and labour forsecond class hard wood plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed. |
| 35 | Supply and fixing 35mm thick block board flush shutter with 0.90mm thick lamination on both sides complete, fixed to chowkatsall as specified and directed by Engineer-in-Charge. |
| 36 | Material and Labour for 35mm thick 2nd class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebatedsash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause8.20 (b) complete all as specified and directed. |
| 37 | Supply and fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old un servicable one. |
| 38 | Supply and Fix PVC door frame size 50mm x 47mm made out of 5mm single sideprelam PVC sheet and edges will be painted to match with prelaminated sheetreinforced with MS square tube supplying& fixing in opening as per specification complete all as specified and directed. |
| 39 | Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frameat site as per specification and drawing given in SSR Part-II complete all as specified and as directed. |
| 40 | Supply and fix aluminium handles fabricated type anodised of size 100mm complete all as specified and as directed. |
| 41 | Supply and Fix 200mm long aluminium barrel tower bolt complete all as specified and as directed. |
| 42 | Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 43 | Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed. |
| 44 | Supply and fix for 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 45 | Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over red oixde primerincludingpreparation of new wooden surface all as directed and as specified |
| 46 | Supply and fixing galvanised steel tubing medium grade 15 mm borewith all fittings and fixed complete to walls/ceiling/floors all as specified and as directed. |
| 47 | Supply and fixing galvanised steel tubing medium grade 20 mm borewith all fittings and fixed complete to walls/ceiling/floors all as specified and as directed. |
| 48 | Supply and fixin repairs Chromium plated fancy type stop cock (Angular) with wall flange, cast copper alloy with capstan handle, screwed down, high pressure screwed both ends for 15mmbore iron pipe or for unions complete all as specified and as directed. |
| 49 | Supply and fix Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screwscomplete as all specified and directed. |
| 50 | Supply and fixBrass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 51 | S&F inBrass CP fancy Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. |
| 52 | Supply & Fixing Vitreous china wash down water closet semi pedestal pattern (anglo Indian type EWC )twin flush fitting 710x370x745mm (P or S trap) with soft close seat cover with flat bootom and MS chromium plated or aluminised hinging devise and including all fittings complete all as specifiedMake : Cera, or equivalent |
| 53 | Supply and fix10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 54 | Supply and fixVitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed. |
| 55 | Supply and fixing for high pressure PVC connection pipe 15mm dia with Brass CP Check nut and rubber washer complete with 600 mm length complete all as specified and as directed by Engr-in-Charge. |
| 56 | Supply and fixtoilet paper holder, vitreous Chine, box type & fixing toilet paper holder of vitreous China fixed to walls with chromium plated (CP) brass screws completely all as specified and as directed. |
| 57 | Supply & Fixing CP pillar taps 15mm bore long bodycast copper alloy fancy type chromium plated crutch and butter fly handle screwed down including fixedall as specified. Make : prayag/ Cera/Marc |
| 58 | Supply and fix PTMT grating 100mm dia with or without waste hole complete all as specified and as directed. |
| 59 | Supply and fix in repairs Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 60 | Supply and fix PVC (SWR) Pipes 110mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc,complete all as specified and as directed. |
| 61 | Supply and fix 110mm dia PVC (SWR) Tee and bend with access door suitable for PVC (SWR) Pipes 110m in Bore (dia), jointing with Solvent Cement and fixed, complete all as specified and as directed. |
| 62 | Supply & Fix PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc,complete all as specified and as directed. |
| 63 | Supply and Fix PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in Bore (dia) with access door, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 64 | Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100mm dia pipe complete all as specified and as directed. |
| 65 | Supply and fix Rotational moulded polyethylene three layered water storage tanks having capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including taking down unserviceable tank all as specified and directed. |
| 66 | Supply and fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 25 mmISI marked and taking down unserviceable ball valves all as specified and as directed. |
| 67 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed. |
| 68 | Supply and fixing in repairs6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing andfixed to wooden plugs with CP Screws and cup washersall as specified and as directed. |
| 69 | Supply and fix aluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Glass panel/particle board panel filling shall be measured and paid separately. |
| 70 | Supply and fix for powder coated,Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified. |
| 71 | Supply and fix Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 72 | Supply and Fixing 4.8 mm thick sheet glass ordinary quality in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery with rubber gasket as specified and as directed. |
| 73 | Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregateas in cover slabs of man holes including necessary form work, placed in position, set in CM 1:4 complete all specified and as directed. |
| 74 | M & L for point wiring using 1.5 Sqmm lSI marked 1.1 KV grade single core FR LS flexible cable, conforming to IS: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to IS: 8130-1984 and insulation conforming to IS:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in and including not less than 20 mm NB PVC medium grade conduits (concealed), conforming to IS: 9537 (Part 3)- 1983, colour coded as specified in IS: 11353-1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to IS: 14772- 2000 and suitable for modular cover-plates complete all as specified in IS: 732-1989 and directedfor the following:-. Note: Circuit wire from DB to switch boards shall be included in the quoted rate. No additional payment will be paid to the contractor for the circuit submain. (a) onefan point/lightpoint controlled by one switch 5 Amps |
| 75 | (b ) onefan pointpoint controlled by one switch 5 Amps |
| 76 | (c) One 3pin socket outlet 5 Ampson Independent board |
| 77 | (d ) One 3pin socket outlet 5 Ampsonsame board |
| 78 | All as per Item No. 75 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mmPVC copper conductor used as earth wirefor power point on independent board for One 3 pin socket outlet, 15 Amps. |
| 79 | Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed. |
| 80 | Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed. |
| 81 | Supply only Modular switch socket combination 16 A 6 pin 3 Module complete all as specified and directed. |
| 82 | Supply and fixCeiling rose in poly carbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed. |
| 83 | Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make: Havells /Philips/Bajaj. |
| 84 | Supply and fix LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells/ Philips/Bajaj. |
| 85 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC) complete all as specified and as directed. |
| 86 | Supply and fix Exhaust Fan of size 300 mm sweep with louvers, with plastic body AC 230 V, 50 Hz,1200 RPM and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. |
| 87 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. |
| 88 | Supply and fix MCB SPN 40 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 89 | Supply and fix MCCB, 4 pole,415 volts thermal magnetic release, confirm to IEC 60947-II, F1 frame of rating 63 A, C curve 16 KA breaking capacity complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 90 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer flush to wall complete all as specified and as directed. |
| 91 | Supply and fixing of Triple pole & neutral, double door, 6 way metallic modular distribution board confrming to IEC 61439-3, suitable for flush/surface mounting with provision for FP RCCB /RCBO /Isolator /MCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 Amps rated copper bus bar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet etc. having IK 09 & IP 43 protection complete all as specified and directed . |
| 92 | Material and labour Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi standard copper conductor drawn through and including PVC casing and caping includingall accessories fixed in walls/roof including one run of 4 sqmm earth continuity PVC insulated copperwire complete all as specified and as directed. Note : 2 runs of cable , 1 run of earth wire and one run of casting and caping shall be measured as one length all as specified and directed. |
| 93 | Material and labour for Sub main wiring using two runs of single corePVC insulated cable6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable using as earth wire drawn through and including suitable size PVC casing and caping including taking down old aluminium/CopperSub main wirng complete all as specified and directed. Note-2 runs of cable, 1 run of earth wire and one run of casing and caping shall be measured as one length all as specified and directed. |
| 94 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of 4 core 25 Sqmm sizes fixed in wall/ roof or laying in trenches etc.,complete all as specified and as directed.NOTE: Excavation, earth work shall be measured and paid for separately.Make:- havells/polycab/Asian/Nicco/Incab |
| 95 | Supply,spreading and levelling clean dry sand in trenches all as specified for cable protection complete all as specified and as directed.Note: Punnned thickness shall be measured and paid. |
| 96 | Supply and lay unreinforced precast cable cover size 250X150X40 mm LV1 complete all as specified and as directed. |
| 97 | Supply & Fix 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed. |
| 98 | Supply and fix MCCB 4 pole, 63 A, 16KA in sheet metal enclosures complete all as specified and directed (for incoming at take over point ) |
| 99 | Supplying and laying of GI steel tubes, medium grade of size 40 mm including all atandard fittings laid in trenches, floors etc all as specified and directed by Engr-in-charge. |
| 100 | Supplying and laying of GI steel tubes, medium grade of size 25 mm including all atandard fittings laid in trenches, floors etc all as specified and directed by Engr-in-charge. |
| 101 | Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 40 mm bore complete all as specified and directed. |
| 102 | Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore complete all as specified and directed. |
| 103 | Material and Labour for valve chamber of internal size 900mm x900mmx900mm using 23 cm thick brick masnory wall in CM 1:4 including excavation, earth work in any strata & PCC 1:4:8 foundation type D-2, 100 mm thick including 20 mm thick PCC 1:2:4 type B1 coping & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 2mm MS sheet chamber cover with \"FH\" embossed with opening arrangementlock system with 50x50x6mm angle iron frame duly painted with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
