|
| 1 | Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete allas specified and directed. |
| 2 | Material & labour for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x 24mm x 0.35mm, \"T\" section 24mm x 25mm x 0.30mm and main runner \"T\" section 24mm x 38mm x 0.43mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50mm / 3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with and including painting two coats of plastic emulsion paint over and including one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge. |
| 3 | Supply & fix POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified. |
| 4 | Supply & fix in repair 5 mm thick coloured of any selecetd design hollow PVC wall claddingstrips interlocked to each otherfitted to wall including PVC\"U\" shapes at top/ bottom and PVC angles at windows/door openings allas per manufacturer’s fixinginstructions complete all as specified and directed. |
| 5 | Supply & fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid as per manufacturers instruction complete all as directed by the Engr-in-Charge. |
| 6 | Material and Labour for snap grid ceiling with and including 19mm thicksemi - perforated edge 60cm x 60cm in ceiling board over and including GIgrid prelude XL 24 mm gridmain runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as directed by the Engr-in-Charge. |
| 7 | Material & labour for 10mm thick PVC insulated panels 600mmx600mm with EPS stuck to 1mm printed PVC sheet suitabley placed in and including flase ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mtr length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete allas specified and directed. |
| 8 | Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar complete allas specified and directed. |
| 9 | Material and Labour for precast cement concrete 1:3:6, type C-1, (20mm graded stone aggregate) masonary with solid blocks, exc 10cm in widthand setting in cement mortar (1:6) complete all as specified and directed. |
| 10 | Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed |
| 11 | Material and Labour for preparation of new undecorated surface of wall and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete allas specified and directed |
| 13 | Supply and Fixing Joist channel, angle, MS pipe or tee sections fixed independently, without conneted plated etc Fe-410-W Gde E-250 Quality \"A\" complete allas specified and directed |
| 14 | Material & labour for PCC 1:3:6 type C2 (40mm graded stone aggregate) in foundation for fencing post etc complete allas specified and directed. |
| 15 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 16 | Material & labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W Gde E-250 Quality \"B\" complete allas specified and directed. |
| 17 | Supply and Fixing Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment Fe-410-W Gde E-250 Quality \"A\" complete allas specified and directed. |
| 18 | Supply and Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n. exc 10cm long of Diameter of shank 11mm to 15mm complete allas specified and directed |
| 19 | Dismantling of plain or corrugated steel /AC sheets in roof coverings any type complete allas specified and directed |
| 20 | Supply & fix in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws complete all as specified and directed. |
| 21 | Supply & fix in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ridge,eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws complete all as specified and directed. |
| 22 | Material & labour for preparation of untreated new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quaility) of approved colour over and including a coat of red oxide primercomplete all as specified and directed. |
| 23 | Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete allas specified and directed |
| 24 | Material & labour for cement concrete 1:4:8, type D-2, (40mm graded stone aggregate) 75 mm thick sub base or similar items complete allas specified and directed |
| 25 | Material & labour for Sand filling under floors or in foundationincluding watering and consolidation complete allas specified and directed. |
| 26 | Material & labour for60mm thick coloured rubburised, glossy finish machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and directed. |
| 27 | Material & labour for preparation of old brick/concrete/stone surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete allas specified and directed. |
| 28 | Material & labour for preparation of new brick/concrete/stone surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over priming surface complete all as specified and directed. |
| 29 | Material & labour for preparation of plasteredor unplastered olddecorated surfaces of walls including brooming down or scraping downwith steel wire brushes of smoke spots, moulds, moss efflorescent salts, treatingoil and greasy spots and applying of one coat of cement base painton walls complete all as specified and directed. |
