|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling timber scantlings 40 sqcm and over in section, in any position (unframed work) complete all as specified and directed. |
| 3 | Dismantling timber scantlings in any position in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section (unframed work) complete all as specified and directed. |
| 4 | S&F in repair second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified and directed. |
| 5 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 6 | S&F in repair for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified and directed. |
| 7 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 8 | S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 9 | S&F PVC Coated 12mm Gypsum board/ tiles to flat surface,.suitably placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling, size of grid 605 X 605 mm &hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling old ceiling complete all as specified and directed. |
| 10 | Taking down chowkats or frames without taking down shutters, not exc. 1.5 sqm each, complete all as specified and directed. |
| 11 | Taking down chowkats or frames without taking down shuttersexc. 1.5 sqm but n.exc. 4 sqmeach complete all as specified and directed. |
| 12 | Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed. |
| 13 | Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and directed. |
| 14 | S&F in repair IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 15 | S&F in repair 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 16 | S&F in repair IInd Class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed. |
| 17 | S&F in repair 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats , windows, ventilators etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and directed. |
| 18 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. |
| 19 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as specified and directed. |
| 20 | S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 21 | M&L for sheet glass 5.50 mmthick, ordinary quality and glazing with oil putty in squareexc 0.5 sqm in each pane, complete all as specified and directed. |
| 22 | M&L for sheet glass 5.50 mmthick, ordinary quality and glazing with oil putty in squaren exc 0.5 sq m in each pane complete all as specified and directed. |
| 23 | S&F for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 24 | S&F for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 25 | Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm complete all as specified and directed. |
| 26 | Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 27 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 200 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 28 | S&F 150mm Aluminium handles, cast type, anodise complete all as specified and directed. |
| 29 | S&F 125mm Aluminium handles, cast type, anodise complete all as specified and directed. |
| 30 | S&F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 32 | S&F in repair for 75mm thick, cement concrete 1:4:8, type D-2,using 40mm graded crushed stone aggregate, as in sub base of floor complete all as specified and directed. |
| 33 | M&L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc., complete all as specified and directed. |
| 34 | M&L for rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete/ stone surface surfaces incl finishing surface even and smooth without using extra cement, complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick in cement plaster 1:4 on rough faces of brick work or concrete surfaces/ stone work incl finishing surface even and fair without using extra cement, complete all as specified and directed. |
| 36 | S&F in repair for providing cement concrete 1:3:6, Type C-1, using 20mm graded crushed stone aggregate as in, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 37 | Demolition of brick masonry/ stone masonry built in cement mortar including all quious, pillars arches etc., complete all as specified and directed. |
| 38 | M&L for brick work, with sub class\"B\" brickstraight or curved on plan exc 6m means radius built in cement mortar (1: 6)complete all as specified and directed. |
| 39 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 40 | S&F in repair glazed ceramic coloured tiles of size 300x450x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry @ 3 Kg/Sqm and pointed in coloured cement to match the tiles over 15 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 41 | M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, dark/ double charged area of each tiles n. exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 42 | M&L for non-skid coloured ceramic tiles/ Matt finish 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18sqm but n. exc. 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc., complete all as specified and directed. |
| 43 | S&F vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 44 | S&Fvitreous china wash down water closet pan (EWC) including flushing cistern, seat & cover, PVC 10 Ltrs capacity, including low level incl flush pipe etc., complete all as specified and directed. |
| 45 | Dismantling of 100mm cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/ floor/ wall if required, complete all as specified and directed. |
| 46 | Dismantling 75mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/ floor/ wall if required, complete all as specified and directed. |
| 47 | S&F 75mm bore `sand cast pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 48 | S&F 100mm bore `sand cast pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 49 | M&L for 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and directed. |
| 50 | Supply only 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 51 | S&F brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and directed. |
| 52 | M&L for vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, inclusive of fixing waste pipe, complete all as specified and directed. |
| 53 | S&F for 15mm bore ISI marked bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 54 | S&F of pillar tap of 15mm bore dia ISI marked, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 55 | S&F of 15mm bore stop valve ISI marked, fancy type, CP, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.. |
| 56 | S&F of 15mm size PVC connections with PTMP nuts of length 450mm, complete all as specified and directed. |
| 57 | M&L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up & down old complete all as specified and directed. |
| 58 | M&L for two coats of distemper oil emulsion wall incl preparation of new undecorated surfaces over 3 mm thick wall care putty complete all as specified and directed. |
| 59 | M&L for two coats of synthetic enamel paint over coat of pink primer on newlywooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surfaces, complete all as specified and directed. |
| 60 | M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 61 | M&L for preparation of plastered or unplasteredsurfaces of walls and applying two coats of cement base paint of any approved tint, complete all as specified and directed. |
| 62 | M&L for coloured chequred cement conc tiles 30cmx30cmx25mm thick in grey cement and withpigment in floors etc, set and jointedin neat cement slurry, over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 63 | M&L for green marble work 18 to 20mm thick (table rubbedand polished) in steps, jambs, pillars, windowcills, cooking platforms and like in CM 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble, complete all as specified and directed. |
| 64 | S&F stainless steel curtain rods silver finished 25 mm dia including brackets and side funnel/ wall to wall funnels as deemed necessary at site, complete all as specified and directed. |
| 65 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 66 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe290 Gde-E-165, complete all as specified and directed. |
| 67 | Dismantling water tanks and removing to store exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed. |
| 68 | S&F 500 liters rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed |
| 69 | S&F 1000 liters rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I, complete all as specified and directed. |
| 70 | S&F in repair ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20mm iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 71 | Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. |
| 72 | M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC Casing-N-Capping size of 25x32 mm wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and as directed. |
| 73 | All as per Srl item No 72.00 above but for one Bell/ Buzzer point controlled by one push switch on independent board, complete all as specified and as directed. |
| 74 | All as per Srl item No 72.00 above but one 3 pin socket outlet 5 amps, onsame board with other switches, complete all as specified and as directed. |
| 75 | All as per Srl item No 72.00 above but one 3 pin socket outlet 5 amps, onindependent board, complete all as specified and as directed. |
| 76 | All as per Srl item No 72.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm, complete all as specified and directed |
| 77 | S&F switch piano flush single pole, one way 5 Amp ( ISI marked),complete all as specified and directed. |
| 78 | S&F Bell push, flush type, 5 amp ( ISI marked)complete all as specified and directed. |
| 79 | S&F switch piano flush single pole, one way 15 Amp ( ISI marked)complete all as specified and directed. |
| 80 | S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed. |
| 81 | S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed. |
| 82 | S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked) complete all as specified and directed. |
| 83 | S&F Bell, AC, 230 volts, single pole complete all as specified and directed. |
| 84 | S&F LED tube light along with fixture, 1x20 watt, (4 Feet) wall mounted LED bittern, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements, complete all as specified and directed. |
| 85 | M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 86 | S&F LED 14 watt, complete all as specified and directed. |
| 87 | S&F LED building security light 40 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements, complete all as specified and directed. |
| 88 | S&F LED tube light along with fixture, 1x10 watt, (2 Feet) wall mounted LED bittern, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 89 | S&F LED bulkhead luminaries 20W Decorative type as per sample complete including electrical connection and including taking down existing fittings complete all as specified and directed.Make: Cat part of HPL: HLPLEDBH20W (CW)/ Bajaj/ Crompton Greaves/ Havells or in equivalent as approved. |
| 90 | S&F electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc and fixing arrangements complete all as specified and directed. |
| 91 | S&F 15/ 20 Amp socket with 16/20 Amp MCB with metal box combination s(ISI marked) flush type universal complete all as specified and directed. |
| 92 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arrangements, complete all as specified and directed. |
| 93 | S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metal body with louver including making hole and all fixing all arrangements, complete all as specified and directed. |
| 94 | S&F sheet metal enclosure MCB DB 12 way, SPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make: L&T/ Legrand/ Schneider or in equivalent as approved. |
| 95 | S&F MCB, SP (single pole) 05 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or in equivalent as approved. |
| 96 | S&F MCB, SPN (single pole and neutral) 40/63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or in equivalent as approved. |
| 97 | S&F sheet metal enclosure MCB DB 4 way,VTPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make: L&T/ Legrand/ Schneider or in equivalent as approved. |
| 98 | S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or in equivalent as approved. |
| 99 | S&F in repair Surge protection device (SPD) Voltage protection level Up up to 1.3 kV, suitable for protection of all terminal equipments Both Common & Differential Mode Protection complete all as specified and directed. Make : Havells cat part No: SKU:DHSA2NAN40320 SP+N, ABB/ L&T/ Legrand/ Schneider or in equivalent as approved. |
| 100 | M&L for sub main wiring with 2x6.0Sqmm+1x6.0Sqmm earth Wire single core PVC insulated FRLS-H, PVC sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC casing-N-capping as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length. |
| 101 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor,25 Sqmm1100 volts grade, cross sectional area complete all as specified and directed. |
| 102 | Supply and laying PVC corrugated heavy dutyblack colour suitable for under ground cable including with all fittings 40mm dia complete all as specified and directed. |
| 103 | S&F Galvanized zinc metallic zinc coated Iron Earthing Electrode speciallized developed for high sensitive equipment. Model SN001 (LXXVI MM) as per Cpri 300 Cm long. Tested on 52 kA, C% 12 max, mn 0.60%mm class type GALV. Yield strength 329, tensile Strength 426, Elongation Bend/Flattering.Thickness Internal disposes\" 2 inch x 6mm with base plate 3.15 to close the earthing rod. Terminal 2 inchx 6mm filled with highly conductive compound which increase the life of Earthing electrode. Composition of chemical filled in electrode water solubility. Grain size 100 mesh, along with SN make BFC compound non toxic, non reactive, non explosive and non corrosive, longerlife easytomaintain less space consistent results. Earthing pitand chamber cover complete all as specified as directed. Make: SN ENGINEERING or in equivalent as approved. |
