|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L coloured light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid overincluding screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and as directed. |
| 3 | M&L coloured light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm in vertical surface in skirting etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed. |
| 4 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor, etc and jointed in neat cement slurry over and including cement screed 20 mm thick 1:6. and pointed in white or coloured cement to match complete all as specified and as directed. |
| 5 | M&L Coloured glazed ceramic tiles 450X 300X 7mm thick as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick backing with cm 1:3 complete all as specified and as directed. |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointedin anymortar |
| 7 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 8 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 9 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 10 | Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L Brickwork with sub class B bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 |
| 12 | Material and labour for burnt brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed. |
| 13 | Demolition of reinforced cement conc of any description and in any position complete all as specified and as directed. |
| 14 | M&L RCC Nominal Mix using 20 mm graded stone aggregate type A1 1:1.5:3 as inbeam, cantilevers, lintels over 1.5 m span,Shelves and like similar places complete all as specified and as directed. |
| 15 | Use & Waste of form work to sides and sofits of roof beam ,lintel beam for rough finished surface of concrete complete all as specified and as directed. |
| 16 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 17 | Ditto as above Item No 16 but , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 18 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed. |
| 19 | S&F 4-6 mm thick solid PVC insulation panels placed in false ceiling , fixed with screws in ceiling over and incluiding GI grid frame work for seamless ceiling & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete fixing arrangment as per specification all as directed by Engineer-in-Charge. |
| 20 | S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement incluiding GI grid frame work for seamless ceiling and fixing at site complete as all specified and as directed. |
| 21 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification. |
| 22 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed. |
| 23 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed. |
| 24 | M & L for providing plain cementconcrete type C-1, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 25 | S&F Mild steel flat iron as in hold fast and similar articles conforming to Fe-290 Gde -E-165complete all as specified and as directed. |
| 26 | S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and as directed. |
| 27 | S&F 30 mm thick flush shutter solid core construction, with MDF and ply wood faces paneles , commercial typeon both side . |
| 28 | S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised complete all as specified and as directed. |
| 29 | S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long complete all as specified and as directed. |
| 30 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. |
| 31 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws. |
| 32 | S&F floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed |
| 33 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 34 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 35 | S&F in repairs Mortice lock, vertical type, size 100 mm 4 levers complete all as specified and as directed. |
| 36 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 37 | S&F 4.00 mm thickglass incl tinted/dark film/ heatabsorbing glassof any size each pane complete fixed to UPVC / aluminium frame work incl rubber beading complete all as specified and directed by the Eng-in-charge |
| 38 | S&F 5.00 mm thickglass incl tinted/dark film/ heatabsorbing glassof any size each pane complete fixed to UPVC / aluminium frame work incl rubber beading complete all as specified and directed by the Eng-in-charge |
| 39 | S&F in repairsDoor closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body all as directed by Engr-in-Charge. |
| 40 | Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc. |
| 41 | M&L for rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound as per manufacturer instruction for finished even and smooth (without using extra cement) (WPC will be measured and paid separately). |
| 42 | M&L for rendering 15 mm thick on Surface other then fair faces of brick work or concrete surfaces even and smooth withoutusing extra cement in CM 1:6 . |
| 43 | M&L Rendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) . |
| 44 | Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. |
| 45 | M&L preparation of new plastered wall surfaces and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and providing and applying putty of 1 mm thickness to prepare the surface even and smoothcomplete all as specified and directed. |
| 46 | M&LApplying two coats of Oil bound distemper to newly plastered wall over a coat of primer over putty of 1 mm thicknessincluding preparation of newly platsered wallall as specefied and directed. |
| 47 | M&L complete removal of existing treatment of old decorated wall surfaces and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and providing and applying putty of 1 mm thickness to prepare the surface even and smooth completeall as specified and directed. |
| 48 | M&LApplying two coats of Oil bound distemper to wall over a coat of primer over putty of 1 mm thickness including complete removal of existing treatment all as specified and directed. |
| 49 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 50 | M&L for applying for preparation of old painted surfaces of wood and woodbasesurfaces of any description , not otherwise described over 10 cm width or girth and applying one coat ofsynthetic enamel paint all as specefied and directed. |
| 51 | M&L preparation of old painted steel surfaces over 10cm width or girthand applying one coatof synthetic enamel paint complete all as specified and as directed. |
| 52 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 53 | S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor inbore of pipe 15 mmincl taking down of extg pipecomplete all as specified and as directed. |
| 54 | S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor inbore of pipe 20 mmincl taking down of extg pipe . |
| 55 | M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 56 | Supply and fix,as in repair,15 mm bore pillar tap,fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 57 | Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 58 | S&F in repairs 15 mm bore bib taps, two way, chromium plated, fancy type, cast copper alloy with single handle and wall flange,screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 59 | Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed |
| 60 | S&F in repair 15 mm dia stop cock/angle stop cock fancy type chromium plated incl CP nipple and socket complete all as specified and as directed. |
| 61 | Supply and fix, as in repair,vitreous china wash basin, white,flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste pipe brackets,waste pipe & coupling, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 62 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 63 | Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 64 | Supply and fix as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 65 | Supply and fix,as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 66 | Supply and fix in repair bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws, CP spreader and pointing around urinals back in cement all as specified |
| 67 | Supply & fixing 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with top) hoisted and fixed in position including float valve all as specified after dismantling of existing. |
| 68 | S&F in repairs 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed. |
| 69 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 70 | Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. |
| 71 | S&F in repairs PVC (SWR) 110mm dia bends any radius all as specified and directed. |
| 72 | Supply and fix, PVC cowls 110 mm bore all as specified and directed. |
| 73 | Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. |
| 74 | S&F in repairs PVC (SWR) 75 mm dia bends any radius all as specified and directed. |
| 75 | Supply and fix, PVC cowls75 mm bore all as specified and directed. |
| 76 | S & F for 100 mm bore of pipe stack clamp out of 50mm x 5 mmflat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 77 | Ditto All asabove Item No 76 but 75 mm bore pipe complete all as specified and as directed. |
| 78 | M&L in repair 75 mm dia of outlet PVC(SWR)floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 79 | S&F peel and stick wall moulding,chair rail wainscoting panel , finish trim for decoration of wallfixed complete all as specified and directed. |
| 80 | S&F in repair single lever basin mixer tall height, chromium plated, for mixing hot and cold water complete all as specified and directed. |
| 81 | S&F in repair Toilet paper holder with flap guard chromium plated with bracket guard complete all as specified and directed. |
| 82 | S&F in repair Rimless Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 380x670x765 mm, S Trap- 300 mm complete all as specified and directed. |
| 83 | S&F in repair Table Top Basin, Fixing Accessories And Accessories Set, Size:700 x 435 x 135mm complete all as specified and directed. |
| 84 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. |
| 85 | Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC rigid conduit (medium grade) including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including connected modular items/fixture like modular metal flush box,base/cover plate for switch/sockets etc including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- |
| 86 | One light/fan point controlled by one,one way switch. |
| 87 | One 3 Pin 5 Amps socket out let point onindependentboard. |
| 88 | One 3 Pin 5 Amps socket outlet point on same board alongwith other suitable switchs. |
| 89 | All as per item above here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed. |
| 90 | Supply and fixing in repair of modular switch one way 6 amps 1 module 240 Volts incl taking down old unsv one complete all as specifed/directed. |
| 91 | Supply & fixing in repair of modular type,1 module 16 Amps one way switch 240 Volt AC including taking down old unsv complete all as specified directed. |
| 92 | Supply & fixing in repair of modular socket out let 2/3 pin 6 Amps combined 2 module 240 Volts incl taking down old unsv one complete all as specified / directed. |
| 93 | Supply & fixing in repair of modular type, 2 module,6/16 Amps combined socket 240 Volt AC including taking down old unsv complete all as specified / directed. |
| 94 | Supply and fixing in repair of modular fan regulator for BLDC fans, 2 module 240 Volts complete all as specifed. |
| 95 | Supply and fixing in repair ofceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed. |
| 96 | S&F in repair of Lamp holder, PVC/ polycarbonate type with cord grip cap suitable for pendate fittingsincluding taking down old unsv ones complete all as specified and as directed. |
| 97 | S & F in repair Surface and wall mounted LED batten 20 watt 4ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050 Lumens, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. |
| 98 | Supply and fixing round shape 15 watt warm white in color 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 99 | Supply and fixing in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 100 | Supply and fixing round shape 6 watt warm in color 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 101 | S & F in repair of wall mounted decorative type warm white in colour LED mirror light 6 watt, 2ft long in white aluminium finish complete all as specified and as directed. |
| 102 | S&F of Modern LED Decorative wall light,premium metal quality brass finishes with 02 Head, rust free fixture with white glass diffuser warm white in color suitable for 9/12 W LED lamp/bulb E27 base,incl LED lamp complete all as specified & as directed. |
| 103 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 104 | Supply and fixing of single Pole & Neutralenclosure with 2 pinand earthplug & socket for incorporating with double pole 20 Amp MCB complete all as specified as directed by the Engineer-in-charge. |
| 105 | S&F of AC short circuit protection motor starter with 25 Amps MCB protected power unit 230 Volt complete all as specified and directed. |
| 106 | S&F MCCB 4P 200 Amps 415V ,50 Hz ,breaking capacity 36 KA . Including dismantling taking down unsv one.Make Legrend /L&T or equivalent. |
| 107 | Supply and fixing in repair of MCB TPN DB 4 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 108 | Supply & fixing in repair of MCB TPN 63 Amps \"C\" Series 10 KA 415 volts complete all as specified /directed. |
| 109 | Supply and fixing in repair of MCB SPN DB 12 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 110 | Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 111 | Supply and fixing in repair of MCB SPN 32/40 Amps \"C\" series 10kA 240 volts complete all as specified and diretced. |
| 112 | Supply and fixing in repair of MCB SP 6-32 Amps \"C\" series 10kA 240 volts complete all as specified and diretced. |
| 113 | S&F internet socket RJ-45, suitable for CAT 6 cable, sheilded, folded metal 1 moduleall as directed. Make : Crabtree, Cat No : ACVKJWW451 or techno-commercially equiv in Anchor Roma/Legrand. |
| 114 | S&F TV coaxial socket,1 moduleall as directed. Make : Crabtree, Cat No : ACVKT0W001 or techno-commercially equiv in Anchor Roma/Legrand. |
| 115 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete all as specified and diretced. |
| 116 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and diretced. |
| 117 | Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 118 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 119 | Material & labour for Sub main wiring with four runs of single core 10 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 10 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 120 | Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron GI wire of size 4 mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantaling old unsv onescomplete all as specified and as directed by the Engineer-in-Charge. |
| 121 | Supply and fixing in repair of busbar chamber 4 way of current rating 200 Amps, wall mounted made of ETP grade copper incl cable connection with suitable aluminum lugs & glands complete all as specified & as directed.Make :- Havells Cat No IHBC020004/Legrand/ABB |
| 122 | S&F VTPN DB,MCCB incomer,6 ways double door,Metal door ,IP-43 IK 09 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+24complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and as direct. Make: ABB cat part No IP-VTPN04WAY MCB/IC MD DB or equivalent in Legrand/Havells |
| 123 | Excavation intrenches in soft/loose soil not exceeding 1.5 mtrdeep and not exceeding 1.5 mtrwide for laying of cable and erection of poles all as specified and directed at site. |
| 124 | Removing excavated material n.exceeding50 m and depositing at a level n.exc 1.5 mabove the starting point all as specified & directed by Engineer-in - Charge. |
| 125 | Returning, filling in including spreading, leveling, watering and well ramming excavated soft/loose soilin layers , all as specified and directed at site |
| 126 | M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge.Note : For the purpose of payment only punned thickness will be measured. |
| 127 | M&L for brick protection cover of size 230x115x75 mm to LT underground cables with sub class \"B\" over burnt brick, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. |
| 128 | Supply and fixing of GI tubing light grade 80mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wallcomplete all as specified and directed . |
| 129 | Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wallcomplete all as specified and directed . |
| 130 | Boring/Drilling (horizontally) manually under min 0.5 to 2 m deep in soilbelow existing road suitable for passing GI tubing of 40 to 80 mm bore complete all as specified. |
| 131 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core incl taking down old unsv complete all as specified & as directed. . |
| 132 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core incl taking down old unsv complete all as specified & as directed. . |
| 133 | Supply, installation, testing and commissioningof Panel board not less than 1.0m x 0.8 m x0.50 m , outdoor cubical type factory made (CPRI approved) ,double door , front& back both side openable type fixed with Butt Hinges and locking arrangement with Aldrop latches , fabricated of CRCA sheet , inner sheet 2.0 mm thick hinged type door for individual MCCBs and outer door 3.15 mm thick,rubberised gasket, supported on 50x 50 x 6 mm angle iron and Tee section frame dust and vermin proof complete with aluminium bus bar 4 Nos, 400 Amps rated capacitymounted on porcelain insulators totally enclosed chamber for protection 3 phase 415 volt with suitable capacity aluminium bus bar /PVC insulated copper cable control wiring duly mounted on PCC foundation with suitable size of bolts, nuts & wahsers and connecting all I/C & O/G existing cables. Panel boardshall be powder coated and angle iron frame painted with black synthetic enamel paint over a coat of red oxide primer complete, connecting existing cables with suitable size glands and lugs to accommodate and includingthe following :- |
| 134 | Aluminium busbar 400 Amps rated capacity-04 Nos. |
| 135 | MCCB250 Amps, 4 pole, 415 volt, 25 KA thermal &magnetic release adjestable type - 01 No (for Incoming) |
| 136 | Spreader Link for MCCB - 02 Sets |
| 137 | Indication lamp Neon/ LED type (set of three) - 01 Set |
| 138 | Danger Notice plate - 01 No. |
| 139 | Panel control wiring with 10 sqmm s/c copper wire complete- 01 Job. |
| 140 | Dismantling and taking down old unserviceable LT panel board and Supply, installation, testing and commissioningof Panel board not less than 1.5m x 1.2 m x0.60 m , outdoor cubical type factory made (CPRI approved) ,double door , front& back both side openable type fixed with Butt Hinges and locking arrangement with Aldrop latches , fabricated of CRCA sheet , inner sheet 2.0 mm thick hinged type door for individual MCCBs and outer door 3.15 mm thick,rubberised gasket, supported on 50x 50 x 6 mm angle iron and Tee section frame dust and vermin proof complete with aluminium bus bar 4 Nos, 600 Amps rated capacitymounted on porcelain insulators totally enclosed chamber for protection 3 phase 415 volt with suitable capacity aluminium bus bar /PVC insulated copper cable control wiring duly mounted on PCC foundation with suitable size of bolts, nuts & wahsers and connecting all I/C & O/G existing cables. Panel boardshall be powder coated and angle iron frame painted with black synthetic enamel paint over a coat of red oxide primer complete, connecting existing cables with suitable size glands and lugs to accommodate and includingthe following :- |
| 141 | INCOMING :- (a)Aluminium busbar 600 Amps rated capacity-04 Nos.(b) MCCB400 Amps, 4 pole, 415 volt, 36 KA thermal &magnetic release adjestable type - 01 No (c) Changeover switch 400 Amps -01 No(d) Spreader Link -02 Sets |
| 142 | OUTGOING :-(a) MCCB 250 Amps,4 pole,415 volt 25 kA thermal &magnetic release adjestable type - 02 Nos (b) MCCB 200 Amps, 4 pole,415 volt 25 kA thermal &magnetic release adjestable type - 01 No(c) MCCB 160 Amps, 4 pole,415 volt 16 kA thermal &magnetic release adjestable type - 01 No(d) Spreader Link -06 Sets(e) MCB TPN 63 Amps,415 Volt \"B\" curve -02 Nos(f) MCB 6 Amps, 415 Volt, \"B\" curve -03 Nos(g) Indication lamp Neon/ LED type (set of three) - 01 Set(h) Danger Notice plate - 01 No.(j) Panel control wiring with 16 sqmm s/c copper wire complete- 01 Job. |
| 143 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. |
