|
| 1 | Dismantling of plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings complete all as specified and as directed. |
| 2 | Supply and fix forpre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | Supply and fix forpre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | Supply and fixrolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed. |
| 5 | Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERWor induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and directed. |
| 6 | Dismantling of old structural steel / wooden batten as inpost /rafter/purlin complete all as specified and as directed. |
| 7 | Material and labour forpreperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibedand applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 8 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime)wash on ceiling complete all as specified and directed. |
| 9 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of cement based paint (any tint) on walls complete all as specified and directed. |
| 10 | Material and labour forpreparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed. |
| 11 | Material and labour forpreparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed. |
| 12 | Material and labour for complete removal of existing treatment including scrapping levelling & prepearing the surface of wall and applying two coat of distemper oil emulsion(OBD) over a coat of primer on wall surfacescomplete all as specified and as directed. |
| 13 | Material and labour for wall care putty of 3 mm thick as in interior / exterior on wall / ceilingsurfaces of any descriptionfinished smooth and even surfces complete all as specified and as directed. |
| 14 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and as directed. |
| 15 | Dismantling ofwall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed. |
| 16 | Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm)to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. complete all as specified and as directed. |
| 17 | Material and labour for7-8 mm thick gypsum board/ tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed. |
| 18 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level complete all as specified and as directed. |
| 19 | Material and labour for 25mm thick PCC type B1 (1:2:4) 20 mm graded stone agg as in floor finished fair, even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed. |
| 21 | Demolition of stone slabs/flooringof any description laid bedded and pointed any mortar complete all as specified and as directed. |
| 22 | Material and labour for granite slabmachine cut for 20 mm thick bedded and jointed with colour cement to match,cut to shape required complete all as specified and as directed. |
| 23 | Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing includingscreed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 24 | Description all as per ser No 23 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 25 | Material and labour for kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 26 | Description allas per ser No 25 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 27 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 28 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 29 | Material and labourfor vitrified ceramic tiles 7-9 mm thick light shade, (square/rectangular) polished, area of each tiles exceeding 0.36 Sqmn.exceeding 0.42 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed. |
| 30 | Descrption allas per item no.29 above but as in skirting over,including 10mm thick plaster in CM(1:4) complete all as specified and as directed. |
| 31 | Material and labourfornon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 32 | Description allas per item no.31 above but as in skirting over,including 10mm thick plaster in CM(1:4) complete all as specified and as directed. |
| 33 | Material and labourfornon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar complete all as specified and as directed. |
| 34 | Material and labourfor glazed ceramic colouredtiles in vertical surface 450 X350X7/350X250X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coatcomplete all as specified and as directed. |
| 35 | Supply and fixin repairs aluminium body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 36 | Supply and fix for powder coated anodised aluminiumventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wallincludingdemolition of RCC jali ventilators complete all as specified and as directed. |
| 37 | Supply and fixin repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide (wall) with chromium plated bracket guard and with CP aluminium railing complete all as specified and as directed. |
| 38 | Supply and fixin repair chromium plated towel ring complete all as specified and as directed. |
| 39 | Bib taps 15mm dia, cast copper alloy chromium plated,with CP flange supply and fixedin repair complete all as specified and as directed. |
| 40 | Supply and fixin repairbib taps 15mm dia, cast copper alloy chromium plated, long body,with CP flange all as per makes specified in PScomplete all as specified and as directed. |
| 41 | Supply and fix in repair towel rail 600 mm long offixed with and including chromium plated brass screw and wooden / plastics cleats complete all as specified and as directed |
| 42 | Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and asdirected. |
| 43 | Supply and fix in repairs stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makescomplete all as specified and as directed. |
| 44 | Supply and fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) \"P\" or \"S\"trap connecting to flush pipe and to anti syphonage pipe, all as per makes specified in PS. complete including making good to floor complete all as specified and as directed. |
| 45 | Supply and fix in repairs brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as per makes specified in PS complete all as specified and as directed. |
| 46 | Supply and fix in repairs gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 47 | Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS , complete all as specified and as directed. |
| 48 | Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per makes specified in PScomplete all as specified and as directed. |
| 49 | Supply and fix in repairs vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS completeall as specified and asdirected. |
| 50 | Supply and fix in repairs PVC connections 15 mm size with PTMT nut of length 450 mmcompleteall as specified and asdirected. |
| 51 | Supply and fix in repairs 15 mm bore Pillar taps, cast copper alloy fancy type,chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PScomplete all as specified and as directed. |
| 52 | Supply and fix in repairspillar cock swan neck spout (left/right) and areratorcomplete all as specified and as directed. |
| 53 | Supply and fix in repair wall mixerwith 165mm(6.5\"\") long swivel spout,connecting legs and wall flangescomplete all as specified and as directed. |
| 54 | Supply and fixhealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respectcomplete all as specified and as directed. |
| 55 | PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed. |
| 56 | Supply and fix in repairangle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrulefor 15 mm bore of pipe complete all as specified and as directed. |
| 57 | Supply and fixfancy type (in repairs) stop cock (concealed)cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cupfor 15 mm bore of pipe complete all as specified and as directed. |
| 58 | Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrulefor 15 mm bore of pipe complete all as specified and as directed. |
| 59 | Supply and fix in repairs SS towel rack for bathroom wall mounted with towel hooks and adjustable towel bar,towel holder 24-inch all as per make specified in PS complete all as specified and as directed. |
| 60 | Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed. |
| 61 | Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each complete all as specified and as directed. |
| 62 | Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as specified and as directed. |
| 63 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed. |
| 64 | Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock25mmthick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed . |
| 65 | Supply and fixfactory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and as directed. |
| 66 | Supply and fix35mm thick 2nd class HW glazed or skeleton shutter open rebateddivided into square with plainchamfered or rounded mitred and rebatedwithout sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed. |
| 67 | Supply and fix 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 68 | Supply and fixstrucural steel framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confirming to Fe 290 gde E 165 complete all as specified and as directed. |
| 69 | Material and labourfor two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed. |
| 70 | Material and labourfor galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and as directed. |
| 71 | Material and labourfor Mild steel100 mm size butt hinges, medium weightcomplete all as specified and as directed. |
| 72 | Material and labourforaluminium handles 150 mm long,cast type anodised complete all as specified and as directed. |
| 73 | Material and labourforaluminium anodised barrel tower bolt 200mm long complete all as specified and as directed. |
| 74 | Supply and fix for mild steel sliding door bolts, plate type, withbright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed300mm long complete all as specified and as directed. |
| 75 | Supply and fix flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in holdfasts complete all as specified and as directed. |
| 76 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shuttersfor mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature1.4 mmand two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed. |
| 77 | Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 78 | Supply and fixing anodised aluminium door shutters, aluminium section weighing more than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.NOTE :- The item include Glass, particle board, SS Wire cloth 0.36 nominal dia.Chowkhat Frame : 63.50x38.00x0.80 mm Shutter verticle/stile: 47.50x44.50x1.1 mmShutter middle rail : 49.90x44.45x1.00 mm Shutter top : 47.50x44.45x1.00 mmShutter bottom rail : 114.5.50x44.45x1.10 mm |
| 79 | Supply and fix fancy type SS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracketfixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and as directed |
| 80 | Supply and fix in repairs 75mm bore PVC(SWR) pipe,type \"B\" single socketed in any length with rubber ring joints laid in trenches or floorsall as specified and as directed. |
| 81 | Supply and fix in repairs 110 mm bore PVC (SWR) pipes, type \"B\" single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittingscomplete all as specified and as directed. |
| 82 | Supply and fix PVC (SWR) bends type \"B\"of any radius, 75 mm dia complete all as specified and directed. |
| 83 | Supply and fix in repairs PVC (SWR) bends type \"B\"of any radius, 110 mm dia complete all as specified and directed. |
| 84 | Supply and fix75 mm bore PVC (SWR) branch piece (single Y), type \"B\"equal or unequal with access door complete all as specified and as directed. |
| 85 | Supply and fix110 mm bore PVC (SWR) branch piece (single Y), type \"B\"equal or unequal with access door complete all as specified and as directed. |
| 86 | Supply and fix 110mm bore PVC (SWR) WC connector type \"B\"any type fixed in repairs complete all as specified and as directed. |
| 87 | Supply and fix in repairs PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed. |
| 88 | Supply and fix in repairs 100 mm bore cast ironnahanitrap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR)complete all as specified and as directed. |
| 89 | Taking down steel tubing and connection 15mm bore complete all as specified and as directed. |
| 90 | Taking down steel tubing and connection 20mm bore complete all as specified and as directed. |
| 91 | Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. |
| 92 | Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed. |
| 93 | Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 94 | Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 95 | Material and labour for PVC interlocking wall panelling 5mm to 7mm thick of surface finish natural wooden finish shed(in minimum size 1200mm hight x 300mm wide). Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 750mm with centre & edge bracket in tongue & groove system on framework. if required the cavity of framework should be inserted with rock wool with 48 kg and 50mm density and alongwith all accessories and direction of Engineer in charge, including required flashing, U shape groove and other required accessoriescomplete all as specified and as directed. |
