|
| 1 | Surface excavation n. exc(not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard dense soil etc, complete all as specified and as directed. |
| 2 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm onplan and getting out etc, complete all as specified and as directed. |
| 3 | Excavation in trenches not exc 1.5M deep and 1.5M width and getting out in soft or loose soil for foundation of poles (or) cable lyingetc, complete all as specified and as directed. |
| 4 | M&L for returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick etc, complete all as specified and as directed. |
| 5 | Excavation in post hole in hard/dense soil (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface etc, complete all as specified and as directed. |
| 6 | Removing excavated spoil to a distance not exc 50 mtr and deposited where directed at a level n.exc 1.5 mtr from the starting pointetc, complete all as specified and as directed. |
| 7 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or bouldersetc, complete all as specified and as directed. |
| 8 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concreteetc, complete all as specified and as directed. |
| 9 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as surface channels and drainsetc, complete all as specified and as directed. |
| 10 | M&L for cement concrete 1:3:6 type C2 (Using 40mm graded stone agrregate) as in foundation of posts, railing and similar worketc, complete all as specified and as directed. |
| 11 | M&L precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6)etc, complete all as specified and as directed. |
| 12 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and settingin cement mortar 1:4etc, complete all as specified and as directed. |
| 13 | M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m spanetc, complete all as specified and as directed. |
| 14 | M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, drain cover, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4etc, complete all as specified and as directed. (Note : Reinforcement shall be measured and paid for separately) |
| 15 | M&L for providing precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in wallsetc, complete all as specified and as directed. |
| 16 | M&L Reinforced cement concrete (nominal mix) Type B1 1:1.5:3 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concreteetc, complete all as specified and as directed. |
| 17 | M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) inslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the likeetc, complete all as specified and as directed. |
| 18 | Cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface for embedding the APP membrane/Galvalume sheet into the wall /column surfaceetc, complete all as specified and as directed. |
| 19 | Supply only liquid water proofing compoundetc, complete all as specified and as directed. |
| 20 | Cutting chases in stone, concrete block or slab walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girthetc, complete all as specified and as directed. |
| 21 | Cutting holes into or through brick walls built in cement mortar superficial area exc 150 Sqcm but n. exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as requiredetc, complete all as specified and as directed. |
| 22 | M&L formwork for rough finished flat surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batteretc, complete all as specified and as directed. |
| 23 | M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)etc, complete all as specified and as directed. |
| 24 | M & L for form work to sides and soffits of floor or roof beam and lintels as in flat rough finished surfaces of concreteetc, complete all as specified and as directed. |
| 25 | M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wideetc, complete all as specified and as directed. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of750 kg / cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2modulesof elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 28 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded sectionetc, complete all as specified and as directed. |
| 29 | S&F300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded sectionetc, complete all as specified and as directed. |
| 30 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 31 | S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, over all length 140mm complete all as specified and directed. |
| 32 | S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kgetc, complete all as specified and as directed. |
| 33 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staplesetc, complete all as specified and as directed. |
| 34 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsetc, complete all as specified and as directed. |
| 35 | M & L forMild steel TMT bars 5mm dia over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsetc, complete all as specified and as directed. |
| 36 | S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-Aetc, complete all as specified and as directed. |
| 37 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and their shutterswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 38 | S&F Anodised aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilatorsetc, complete all as specified and as directed. |
| 39 | M&L anodized aluminium snap grid framework incl 4 mm thick non asbestos fibre cement building boards 600x600mm incl two coats OBD and preparation of surfaces over boardinserted to framework with screws with hangers 3.15 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm longetc, complete all as specified and as directed. |
| 40 | S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia/2-3mm GI wire suspenders (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm longetc, complete all as specified and as directed. |
| 41 | S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of locationetc, complete all as specified and as directed. |
| 42 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsetc, complete all as specified and as directed. |
| 43 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screwsetc, complete all as specified and as directed. |
| 44 | M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primeretc, complete all as specified and as directed. |
| 45 | M&L for 16-18mm thick granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screed bed in CM 1:4 including grinding/chamfering and polishing the edgesetc, complete all as specified and as directedby Engr-in-Charge |
| 46 | M&L for PCC (1:3:6) type C-2 (40 mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement complete Including filling the joints with mastic compoundetc, complete all as specified and as directed. |
| 47 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base, finish the top surfaces even and fairetc, complete all as specified and as directed. |
| 48 | M & L for providing 40 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finishing the surface of concrete topping even and fair without using extra cement etc, complete all as specified and as directed. |
| 49 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3)etc, complete all as specified and as directed. |
| 50 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) beddingetc, complete all as specified and as directed. |
| 51 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4etc, complete all as specified and as directed. |
| 52 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3etc, complete all as specified and as directed. |
| 53 | M&L chequered Cement concretetiles30 cmx30cmx 25 mm thick set, jointedand pointed neat cement slurry in floorwith grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed etc, complete all as specified and as directed by Engr-in-Charge. |
| 54 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cementetc, complete all as specified and as directed.(Note: Water proofing compound shall be measured and paid separately) |
| 55 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cementetc, complete all as specified and as directed. |
| 56 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with wateretc, complete all as specified and as directed. |
| 57 | M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatmentetc, complete all as specified and as directed. |
| 58 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smoothetc, complete all as specified and as directed. |
| 59 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqmetc, complete all as specified and as directed. |
| 60 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqmetc, complete all as specified and as directed. |
| 61 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each paneetc, complete all as specified and as directed. |
| 62 | S&F figured glass, pin head type sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each paneetc, complete all as specified and as directed. |
| 63 | M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer includingpreparation of new steel surfaces of any description over 10cm width or girth not otherwise describedetc, complete all as specified and as directed. |
| 64 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as requiredetc, complete all as specified and as directed. |
| 65 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as requiredetc, complete all as specified and as directed. |
| 66 | S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet etc, complete all as specified and as directed. |
| 67 | S&F 15mm dia bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc, complete all as specified and as directed. |
| 68 | S&F 25mm boregun matel globe or gate valve with iron wheel, screwed both ends for iron pipesetc, complete all as specified and as directed. |
| 69 | S&F PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washeretc, complete all as specified and as directed. |
| 70 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floorsetc, complete all as specified and as directed. |
| 71 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floorsetc, complete all as specified and as directed. |
| 72 | S&Ffor 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to walls or in floors etc using synthetic rubber adhesive cement solvent etc, complete all as specified and as directed. |
| 73 | S&Ffor 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to wall etc using synthetic rubber adhesive cement solvent etc, complete all as specified and as directed. |
| 74 | S&FPVC (SWR) bend 75mm dia with access door, any radius as required and jointed with approved adhesiveetc, complete all as specified and as directed. |
| 75 | S&F in PVC (SWR) 110mm dia bend of any radius with access door and jointed with approved adhesiveetc, complete all as specified and as directed. |
| 76 | S&F for 110mm dia PVC (SWR) bends any radius etc, complete all as specified and as directed. |
| 77 | S&F inPVC (SWR) vent cowl 110mm dia jointed with approved adhesiveetc, complete all as specified and as directed. |
| 78 | M&L PVC (SWR) floor trap 100mm with grating including jointing with solvent cementetc, complete all as specified and as directed. |
| 79 | S&F75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipeetc, complete all as specified and as directed. |
| 80 | M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mmand width of bed as 450mm to sewage pipes of 100mm internal dia including packing under, and haunching against the sides of pipes after they are laid and testedetc, complete all as specified and as directed. |
| 81 | S&F wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm diapillar cock , CI bracket 15mm dia polythene connection 450mm long , 32mm dia waste coupling and32mm dia PVC waste pipe 450mm long etc. complete all as specified, includingtaking down the existing wash hand basin etc, complete all as specified and as directed. |
| 82 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mmetc, complete all as specified and as directed. |
| 83 | S&Fvitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe)etc, complete all as specified and as directed. |
| 84 | S&FPVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracketetc, complete all as specified and as directed. |
| 85 | S&F 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinaletc, complete all as specified and as directed. |
| 86 | S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging deviceetc, complete all as specified and as directed. |
| 87 | S&Fhealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positionetc, complete all as specified and as directed. |
| 88 | Dismantling wrought iron or mild steel work of any description not otherwise provided foretc, complete all as specified and as directed. |
| 89 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coveringsetc, complete all as specified and as directed. |
| 90 | Dismantling of ceiling boarding including grid of any description fixed in any position with nailsetc, complete all as specified and as directed. |
| 91 | M&L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof coveringetc, complete all as specified and as directed. |
| 92 | M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron fixed over framemade up of aluminium hollow section of 25x50mm, 2mm thick, duly fixed to wall/ceiling with expansion fastener having panels n. exc 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc complete all as specified and as directed.Note : (i)Necessary scaffolding required for the work upto three storeyed bldg shall be deemed to include in the unit rate quoted. |
| 93 | Cutting down vegetation growths like plants/trees of girth n.exc. 60 cm from roof tops/ parapet walls, external walls of buildings, chajjas, wall junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:11/5:3) type B-1 or in cement mortar (1:2) upto 12 metre height complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of scaffolding/staging etc. as necessary to execute the work. |
| 94 | M&L for aluminium composite panel sheet of 4mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron fixed over frame duly fixed to door shutter with expansion fastener having panels n. exc 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc complete all as specified and as directed. |
| 95 | S&F 100mm size stainless steel butt hinges medium weightetc, complete all as specified and as directed. |
| 96 | S&F WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed.Make : Jaquar Cat part No CON-167KNB or equivalent in Parryware/Prayag/Gem |
| 97 | S&F Toilet paper holder .Make : Jaquar Code (ACN-1153N) or equivalent in Parryware/Prayag/Gemcomplete all as specified and directed. |
| 98 | S&F towel ring round.Make :Jaquar AQN -7721 or equivalent in Parryware/Prayag/Gem |
| 99 | S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed.Make : Jaquar Cat part No AQN-7711 or equivalent in Parryware/Prayag/Gem |
| 100 | S&F CP corner glass shelf with bracket complete all as specified. Make : Jaguar Cat Part No -CAN-1173 or equivalent in Parryware/Prayag/Gem |
| 101 | S&F chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified |
| 102 | S&F bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.Make : Jaquar Cat part No CON-107KN or equivalent in Parryware/Prayag/Gem |
| 103 | S&F CP angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type complete all as specified and as directedMake : Jaquar Cat part No CON-053KN or equivalent in Parryware/Prayag/Gem |
| 104 | Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed.(Make -Jaquar Cat. Con-281KN or equivalent in Parryware/Prayag/Gem |
| 105 | S&F mirror cabinet PVC/fiber of size 550x520x100mm with sliding mirror 4mm thick 2 Nos of size 240x290mm with built in rack of size 230x150x90mm with PVC plug etc with CP towel rail of length 270mm and 100 mm dia complete all as specified and as directed.(Make:Supreme/Prayag/Jaquar) |
| 106 | S&F in repairs CP overhead shower rose dia 105 mm round with revolving joints (with body rotation) & 115mm long arm shower with rapid cleaning system and all fittings complete all as specified and as directed.Make - Jaquar Cat part No - OHS-1709 or equivalent in Parryware/Prayag/Gem |
| 107 | Supply,laying,testing and commissioning ofLT XLPE insulated armoured heavy duty electric aluminium conductor cable 1100 Volts, grade of cross section 2 x 16 sqmm (laid in terenches,ducts,pole,wall etc.) complete all as specified and as directed .Make : Polycab/Gloster/Anchor/Havells/Finolex |
| 108 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVCinsulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed conduit of size not less than 20mm dia, with all necessary fittings, concealedin walls /roof/ floor duly earthed with one run of single core cable of same size but green incolour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricatedMS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Make : Polycab/Havells /Finolex/ Gloster /Anchor |
| 109 | All as per item No 108 above, but,One light/fan point controlled by one modular switch 6 Amps one wayetc, complete all as specified and as directed. |
| 110 | All as per item No 108 above, but,for one modular 3 pin 6 Amp socketon same boardetc, complete all as specified and as directed. |
| 111 | All as per item No 108 above, but , for one modular 3 pin 6 Amp socket outlet on indepent boardetc, complete all as specified and as directed. |
| 112 | All as per item No.108 above, but , point wiring with4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 16 amps socket outlet and geyser and one run of 4.0sqmm cable for earth in green colour on independent boardetc, complete all as specified and as directed. |
| 113 | S & F for switchmodulartype, 6 Amps1 module, 230 volts AC circuitetc, complete all as specified and as directed. |
| 114 | S & F Socketoutlet modular type, single pole one way 16 Ampsetc, complete all as specified and as directed. |
| 115 | S & F Socket outlet modular type , 3 pin,6 Amp 230 volts AC circuitetc, complete all as specified and as directed. |
| 116 | S & F for socket outlet 2 in 1 modular type 3 pin, 6 and 16, universal all as directed. |
| 117 | S & F stepped type electronic fan regulator modular type completeetc, complete all as specified and as directed. |
| 118 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated busbar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply doubledoor SP&N DB system8 ways and making good to the distrubed surface /wallsetc, complete all as specified and as directed. |
| 119 | S & F Ceiling rose PVC polycarbonate, isolated body 3 terminals 230 Vetc, complete all as specified and as directed. |
| 120 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC)etc, complete all as specified and as directed. |
| 121 | S&F exhuast fan, steel body AC single phase 230V of size 380mm sweep with, blades, and frame and louversetc, complete all as specified and as directedby Engr in charge |
| 122 | S&F sub main wiring with With PVC insulated FRLS cable 2 single core 4 sqmm 1100V grade with stranded copper conductor cable using proper colour coding phase Red /yellow/Blue, Beutral-Black and earth-green in and incl rigid PVC concealed conduct (ISI marked) incl all specials/ accessotirs etc and provision of PVC insulated FRLS copper conductor single core 4.0 sqmm for earth continuity all as directed. Make: 3 length of cable and one length PVC conduit shall be measured and paid for one lengthetc, complete all as specified and as directed. |
| 123 | Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KAetc, complete all as specified and as directed. |
| 124 | Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Note for item No 14.0 & 16.0:- Termination of all wiring in to MCBs/MCCBs/DBs shall be through copper lugs/thrimbles of adequate capacityetc, complete all as specified and as directed. |
| 125 | S&F and testing tube light fittings aluminium housing, diffuser slim integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fittingetc, complete all as specified and as directed.Make:Philips Cat Part No. BN021C LED22S or equivalent to CG/Havells/ Luker |
| 126 | S & F 25 watts LED building security light fittings ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP-66 protection. Effciency _> 110LPW including necessary fixing arrangement as per site requirement all as specified and directed by Engr in charge. Make: CG cart part No. LSTS-25-CDL-M or equivalent to philips / Havells |
| 127 | S&F new GI brackets of GI pipe light grade of size of 25mm dia including nuts, bolts and washers for building security lightetc, complete all as specified and as directed. |
| 128 | Earthing complete with galvanisedearth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means boltsand nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,.CI cover with frame etc including necessary excavation in any type of strata , returning, fillingremoval of soil outside MD land ,filling ofcharcoal andsalt complete all as shown in electrical plate No.3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completionetc, complete all as specified and as directed. |
| 129 | M&L for cutting the road/ footpath/ hard standing etc for laying of pipeetc, complete all as specified and as directed by Engr in charge |
| 130 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40mm(OD) x 32mm (ID) along with connected accessories like couplers, bends, end caps etc for LT cable protectionetc, complete all as specified and as directed. |
