|
| 1 | CIVIL WORKS - A |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 10 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 15 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 16 | Add Cost Index @34.58% on SR&DR |
| 17 | Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 |
| 18 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: precoated galvanised iron profile sheets |
| 19 | Refixing of existing precoated galvanised iron profile sheets. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 45 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces etc complete in all respects & as per direction of engineer in charge. |
| 20 | Refixing of existing steel tubes in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 21 | ELECTRICAL WORKS - B |
| 22 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required. Group - A |
| 23 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 24 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 25 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 26 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 27 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 28 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)06 way, Double door |
| 29 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 30 | Supplying and fixing 40 amp rating, double pole, 240 V, isolator in the existing MCB DB complete with connections , testing and commissioning etc. as required. |
| 31 | Providing and instalaltionof 20/22 Watt LED tube light, 6500K ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. (Make like: Crompton Code-TCS-104-20-65-SL-DP-NWH or other equivalent ISI marked reputed brand Havells/ Philips/ C&S/ bajaj/Surya/GM) |
| 32 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty ) armoured UG electric cable with aluminium conductor of size 3.5 x 35 sq.mm. direct in ground including excavation andrefilling the trench but excluding sand cushioning & protective covering. |
| 33 | Supplying and Laying of 1 No 3.5×35 sq mm PVC insulated /PVC sheathed /XLPE power cable of 1.1 KV Grade, in the open duct as required . (Havells/L&T make cable will be used) |
| 34 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5 x 35 sq.mm. (clamped with 1 mm thick saddle) on wall surface as required. |
| 35 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 36 | Providing and laying earth connection from earth electrode with 6 SWG gia G.I. wire in 15 mm dia G I Pipe from earth eletrode including connection with G.I. thimble excavation and filling as required |
| 37 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 38 | S/ITC of indoor type feeder piller, double door made out of 16 SWG CRCA sheet of size 1000 mm x 900 mm x 450 mm deep having 200 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back door openable and P & F of internal connection with suitable size of Al wires, following accessories & angle iron frame of size 900 mm x 450 mm with 600 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required. (i)4 pole, 100 amps, 25 kA, 415 Volts, 50 Hz MCCBMake Havells- 1 Nos..(ii)4 pole, 63 amps, 10 kA, 415 Volts, 50 Hz MCBMake Havells- 1 Nos. (iii)4 pole, 16 amps, 10 kA, 415 Volts, 50 Hz MCBMake Havells- 1 Nos(iv)2 pole, 06 amps , 10 kA, 415 Volts, 50 Hz MCBMake Havells- 1 Nos. (v)Digital multifunction meter (V,A,F,W,VA,PF,Wh Class 1.0) Make L&T-01 no(vi) Indicating lights-03 Nos (3 Nos for Incoming power supply) |
| 39 | Supplying and Laying of 4 core 16 sqmm PVC insulated and PVC round sheathed ,multicore annealed barecopper conductor(Flexible) industrial cable for voltage grade 1100 Volt including thimble ,saddle and connection etc as required |
| 40 | Supplying and Laying of 5 core 2.5 sqmm PVC insulated and PVC round sheathed ,multicore annealed barecopper conductor(Flexible) industrial cable for voltage grade 1100 Volt including thimble ,saddle and connection etc as required |
| 41 | Supplying and Laying of 3 core 2.5 sqmm PVC insulated and PVC round sheathed ,multicore annealed barecopper conductor(Flexible) industrial cable for voltage grade 1100 Volt including thimble ,saddle and connection etc as required |
| 42 | G/Total (Civil + Elect) |
