|
| 1 | Dismantling of existing roof treatment of any description/thickness including dismantling of water proofing plaster etc all as specified and as directed by Engr-in charge. |
| 2 | M&L for PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate coping, benching, roof padding as levelling course complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for 15 mm thick cement plasteringin CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (work is to be done on 4 Story building) complete all as specified and as directed by Engineer-in-Charge.Note :- Water proofing compound shall be measured & paid separately. |
| 4 | Supply only liquidwater proofing compound |
| 5 | Cleaningtop surfaces by brooming, wire brushing, removing grass, raking out joints to receiveplaster and removing debris, grass etc outside the defence landcompleteall as specified and directed by Engineer-in-Charge.Note :-1. Plaster shall be measuredandseparately under appropriate item of Sch ‘A’.2.Rate of this item is inclusive of diconnectfitment at water tank orsolar heater etc and refixing in the same position after compeleting of roof treatment. |
| 6 | M&L for applying 3.00mm thick APP based polymer membrane over 85/25 industrial bituminous coat @ 3 Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqmon newly plastered clean and dry roof surface. Top surface shall be finished with bituminous base Aluminium paint,all joint shall be Sealed by torch application complete all as specified & as directed by Engr-in-charge. |
| 7 | Demolition of brick masonry, built in cement mortar of any description all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for one brick thick brick work with sub class \"B\" old size bricks straight or curved on plan any radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge |
| 9 | Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to the stores and rubbish off the premises. |
| 10 | M&L for Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 11 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed. |
| 12 | M&L Machine pressed precast concrete inter locking paver block any shape and size with Grey cement and no pigment conforming to IS 15658-2006 of 60mm thickness , M-35 Grade complete all as specified and as directed. |
| 13 | M&L for refixing old interlocking paver block over 25mm thick Sand Cushioning complete all as specified and as directed by the Engr-in-charge. |
| 14 | M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cementincl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster.Note: The work to be executed at the hieght of 12 to 15 mtr the rate for necessary scaffolding deemed to be included in the qouted rate. |
| 15 | M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster. complete all as specified and directed by Engr-in-charge |
| 16 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed. |
| 17 | S&F MS work as in post and struts and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conformingto Fe - 290 Gde E - 165 as specified and directed. |
| 18 | S&F 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug ;and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings and including dismantling of old u/s tank complete all as specified and as directed. |
| 19 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high densityplastec ball screwed for iron pipe and fixed. |
| 20 | Taking up or down existing steel tubing/PPR pipe and connections including cleaning for refixing or removal to store complete all as specified and as directed for the following sizes:- |
| 21 | 15mm dia bore |
| 22 | 20 mm dia bore |
| 23 | Supply & fixing, jointing and testing galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors for the following sizes:- |
| 24 | 15mm dia bore |
| 25 | 20mm dia bore |
| 26 | M & L in repair viterous china squating pan of (Orissa Pattern) size 580x440 mm white with \"P\" or \"S\" trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including cement concrete bedding as required set, complete all as specified and directed. |
| 27 | S&F in repair PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. |
| 28 | S&F in repair Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 29 | S&F in repair looking mirror 750x600x6mm thick selected quality glass mounted on 25mm size SS Stud fixed with CP brass screws complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F in repair High pressure PVC connections pipe 600mm long suitable for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repair SS Chromium Plated Towel Rail 600mm Long, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed. |
| 32 | S&Fin repair in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge. |
| 33 | Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortarup to 100 mm dia and removing to store complete all as specified and as directed by the Engineer in Charge. |
| 34 | S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by the Engineer in Charge. |
| 35 | S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed. |
| 36 | S&F in repair 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and as directed by the Engineer in Charge. |
| 37 | S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and as directed by the Engineer in Charge. |
| 38 | S&F in repair 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed by the Engineer in Charge. |
| 39 | S&F in repair100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed by the Engineer in Charge. |
| 40 | M&L for replacement of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge |
| 41 | S&F in repair 75mm dia CI Vent Cowl and fixed with cement morter complete all as specified and as directed. |
| 42 | S&Fin repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 75 mm dia pipe and fixed to wall complete all as specified and as directed. |
| 43 | S&Fin repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 100/110 mm dia pipe and fixed to wall complete all as specified and as directed. |
| 44 | S&F in repair for PVC (SWR) Pipes 150mmBore (dia), Single Socketed, in any length with Solvant Joints fixed to walls or laid in floors, etc complete all as specified and as directed. |
| 45 | S&Fin repair for PVC (SWR) Bend suitable for PVC (SWR) Pipes 150mm in Bore (dia), jointing with Solvent Cement and fixed complete all as specified and as directed. |
| 46 | S&Fin repair Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cat No PSP-504 of Prima/ARG-404 of Coronet or of approved makes mentioned in list of makes here-in-after. |
| 47 | S&F in repair Bib Cock 15mm Bore (dia), Chromium Plated Long Body Bib Cock, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. |
| 48 | S&Fin repair brass CP fency Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. Make :- Cat No PSP-510 of Prima/ARG-104 of Coronet or of approved makes mentioned in list of makes here-in-after. |
| 49 | M&L for stainless steel welded wire mesh for plaster surface, apereture size 10 to 25 mm square, thickness of wire 0.8 to 1.2 mm complete all as specified and as directed by the Engineer in Charge. . |
| 50 | S&Fin repair Liquid Soap Dispensor with holder,fix in wall with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish/Dispensor of any description, complete all as specified and as directed by the Engineer in Charge. |
| 51 | M&Lin repair for 18-20mm thick pre polished granite (Zed Black/Red/Green) slab laid with 15 mm thick CM 1:4 bedding in door Chowkhat/Frame, Window Cill, plateform etc in floor and skirting/dado surfaceand jointed with grey cement slurry and pointed in white cement with pigment to match the shade of granite stone including Moulding/rounding and polishing all as specified and directed by Engr-in-charge |
| 52 | Taking down door/window frame with shutter of area n exc 1.50 sqm each and removing to store complete all as specified and as directed by the Engineer in Charge. |
| 53 | Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqmcomplete all as specified and as directed. |
| 54 | M&L for 35mm thick block board flush shutter with 0.90mm thick Sun Mica/lamination on both sides and 2nd class hard wood lipping alround including mortice Lock with Round Knob fixed in position and fixed to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 55 | S/F 150mm long Aluminium anodised handles, cast type complete all as specified and as directed by the Engineer in Charge. |
| 56 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed by the Engineer in Charge. |
| 57 | S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed. |
| 58 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for guniting RCC works in coloum, beams, slabs, ceiling, Chajjas, Facia, landing, balconies etc by removing loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 50 mm x 25 mm with 3 mm dia steel wire as facias/drops and similar works etc and applying one coat epoxy resin concrete bonding agent over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacurers instruction) to bond old and new concrete, gunniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total avg thickness shall be40 mm thick with cement mortor (1:2) using OPC cement of 43 grade mixing with water proofing admixture polycrete @ 2% by weight of cement complete all as specified and directed by Engr-in-Charge.Note :The following items shall be deemed to be included in quoted rate(i) Reinforcement bars and plastering to guniting surface (ii)After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for plastering(iii) Work is to carried out in patches(v) Rate for scaffolding etc shall be deemed to be included in quoted rate for up to four Storey.(iv) Guniting at Ground floor to 4 th story(v) Anti-corrosive protective coating for reinforced bars (vi) Two coat oil bound/Apex over a coat of primer over guniting including putty(vii)15 mm plaster in CM 1:4shall be done on Guniting area |
| 60 | M&L for preparing old distempered surfaces of wall by complete removal of the existing treatment and applying two coats of oil bound distemper over1 mm thick uniform wall putty by using roller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 61 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon wall over one coat of primer incl one layer of 1mm thick white wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper roller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 62 | M & L for preparation of old plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 1mm thick wall care compound putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper,roller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 63 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 1mm thick wall care compound putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper completeroller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 64 | M&L for preparing the old decorated surfaces of wall, pillasters, cornices etc by complete removal of the existing treatment and applying one coat of apex exterior paint duly adding pigments to required colourfilling all the holesand making uniform, smooth surfaceby using roller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 65 | M&L for preparing the New plaster surfaces of wall, pillasters, cornices etc by complete treatment and applyingtwo coat of apex exterior paint duly adding pigments to required colourfilling all the holesand making uniform, smooth surfaceby using roller/usingsmart periodical methodologycomplete all as specified and directed by Engr-in-charge. |
| 66 | M&Lfor one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 67 | M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed. |
| 68 | M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. |
| 69 | M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces n.exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. |
| 70 | S&F in repair kitchen plate rack of size 600mm x 900 mm made of stainless steel 1 mm thick fixed on the wall with plugs, nuts & washers complete all as directed by Engr-in-charge. |
| 71 | M&L for Mild SteelStructural Work as in Stanchion and Column including covering plate from Steel Sections conforming to Fe-410-0 of quality A including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed. |
| 72 | M&L for Mild SteelStructural Work as in Rafter and Purlins including covering plate from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed. |
| 73 | Taking down Plain/ Corrugated steel/ PVC sheeting from roof of any description from up to 4 Storey building including removing to store complete all as specified and as directed by the Engineer in Charge. |
| 74 | S&F for 6 mm thick Twin wall Thermoclear poly carbonate sheet of any colour as in roof covering/cladding to wall fixed with coach screws and washers over Aluminium cover Strip 40x3mm and rubber washer in each joint complete up to 4 Storey Building all as specified and as directed by Engr-in-Charge. |
| 75 | Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc complete all as specified and as directed by the Engineer in Charge. |
| 76 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge. |
| 77 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 78 | S&F for factory made 30mm ThickMOLDED WPC with decorative surface 2m thk Moulded wood grain printed Prelam PVC sheet on front face and 2mm thk PVC sheet on back side, 100 % Solid door ( Conforming As Per IS : 4020 ) made from 100% LEAD FREEsingle extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capasity.Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screwsi ncl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as sprceified and directed by Engr-in-Charge. |
| 79 | S&F PVC Solid moulded Architrave DoorFrame of Size 50X47mm & more made out ofmin 5.0mmColoured with Plastic Trim decoratedPVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructionscomplete all as specified and as directed. |
| 80 | S&F Factory Made PVC Solid moulded Architrave DoorShutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall becovered with heat moulded Plain Colour PVC \"C\" Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawings, complete all as specified and as directed. |
| 81 | S&Ffor 30mm thickflush shutters, solid core construction, with particleboard core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 82 | S&F for factory made 2nd class H.W.glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads etc complete all as specified. |
| 83 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L for anodised aluminium framed workfor door, window / vent (powder coated)aluminiumwith one or more rebated incl jointed cleat for fixing etc complete all as specied and directed |
| 85 | M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as spd and directed. |
| 86 | S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and as directed by the Engineer in Charge. |
| 87 | M&L for 4.8 mm thick float glass ordinary quality\" frosted glass and glazing with aluminum beeding and gasket to aluminum frameworkin squareexc 0.50 sqm ineach pane in repair complete all as specified and as directed by the Engineer in Charge. |
| 88 | S & F for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 89 | Providing and injecting for RCC member of approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc.complete as per directions of Engineer-in- Charge.Note : The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make. |
| 90 | Chipping of unsound/weak concrete material of 75mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In- Charge |
| 91 | Cleaning of reinforcement from rust from the reinforcing bars upto 12mm dia to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Add new bar of same diameter is the existing bar rusting is more than 40% 989.00 RM 7.31 7,229.59 4202 Providing mixing. complete as per direction of Engineer-In- Charge |
| 92 | Providing mixing and applying over reinforcement bars zinc antirust agent as per specification of approved Make Epoxy Zincrich Primer complete all as specified. |
| 93 | Providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make or Equivalent of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 94 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge |
| 95 | M&L Shotcreting R.C.C. columns, beams and slabs etc. in layers 25-50mm thick (Total Thickness) in Grade M 25 with cement content not less than 330 kg per cum with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- ChargeNote: Rates shall include the providing necessary ground wires etc. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. |
| 96 | Supply and Fixing Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 97 | Supply and Fixing Mild steel TMT bars 10mm or above dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 98 | M&L Design mix for M25 concrete of 20mm graded aggregate for column, beam, roof slab, chajja incl necessary formwork and scaffolding upto fourth floor complete all as specified and directed by Eng-in-charge. |
| 99 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engr-in-charge. |
| 100 | S&F40mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and as directed by the Engr-in-charge. |
| 101 | S&F32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and as directed by the Engr-in-charge. |
| 102 | M&L for Cement concrete type D- 2,1:4:8 (40mm graded aggregate) and 100mm thick complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F in repair Stainless Steel railing with standard Design for railing made out of section 304 with 40mm dia Hand rail and Post with 25mm dia SS Square Tube Horizontal and vertical member with designed toughned glass panel fixed with railing complete and fixed to steps by drilling and embedding all as specified and as directed. |
| 104 | M & L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and as directed by the Engineer in Charge. |
| 105 | S&F in repair stainless steel zinc coated curtain rod of 25mm dia fancy type including MS bracket, side knob, corner bracket etc complete all as specified and directed by Engr-in-charge. |
| 106 | M&L for 18mm thick boiling water proof solid HDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves,etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed. |
| 107 | S&F 125 mm size Hasp and staple, safety type mild steel,wire type,stove enamelled black,including bolt to hinge plate with screwscomplete all as specified & directed by Engineer-in-charge. |
| 108 | S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finishedcomplete all as specified & directed by Engineer-in-charge. |
| 109 | M&L for extruded brass handle, fancy typeas approved by the GE, polished, 100mm long (ISI marked), complete all as specified and as directed by the Engineer in Charge. |
| 110 | M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified and as directed by the Engineer in Charge. |
| 111 | Removing daberies/excavated material to a distance exceeding 1.5KM butnot exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and as directed by the Engineer in Charge. |
| 112 | Cutting the existing CI/GI pipe of size 80mm bore such as Bend,tee, reducer ,coller etc and inserting new tees, branches etc for taking out connectionup to 40mm complete all as directed by engr-in-charge. |
| 113 | Supply and lay pipe galvanised GI Tubing medium grade 40 mm in wall/floor/Pillar and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc incl taking down existing u/s pipe complete all as directed |
| 114 | S&F in replacement Gate/Stop valve 40 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complte all as specified and as directed |
| 115 | S&F in replacement Gate/Stop valve 20 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complte all as specified and as directed |
| 116 | S&F in replacement Gate/Stop valve 15 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complte all as specified and as directed |
| 117 | Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete, including fixture and fittingssuch as switches, ceiling roses, pendents, regulators sockets etc, removing materials to store for keeping in safe custody or for taking credit as per condititions seperately and making good disturbed surfaces of walls, floors etc complete all as specified and as directed by the Engineer in Charge. |
| 118 | M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn throughand includingrigid non metallic PVC heavy duty concealed conduit (min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories likebends.tees, juction boxes etc fixed concealed in wall/ ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminalboxes covered with 3 mm thick plastic laminatedwhite /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one, one way switch complete all as specified and directed by Engr-in-charge |
| 119 | Complete allas per ItemNo. 114 mentionedhere-in- before but on the same boardwith other switches with 1.5 sq mmPVC insulated copper conductor for continuous earthing complete all as specified and as directed by the Engineer in Charge. |
| 120 | Complete allas per itemNo. 114mentionedhere-in- before but one three pin 5 Amps socket out let on independant board with1.5 sq mmPVC insulated copper conductor for continuous earthing complete all as specified and as directed by the Engineer in Charge. |
| 121 | Complete allas per item No. 114 mentionedhere-in- before but 15 Amps3 pinsocket outleton independent board with 2.5 sq mmPVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single corefor continuous earthing complete all as specified and as directed by the Engineer in Charge. |
| 122 | Complete all as per item No. 114 mentionedhere-in- before but one bell/buzzer point controlled by one push button on independent with cables of size 1.5sqmm complete all as specified and as directed by the Engineer in Charge. |
| 123 | Complete all as per item No. 114 mentionedhere-in- before but for Single pole and neutral enclosure with 4.0 sq mmPVC insulated and sheathed copper conductor with 4.00 sq mm PVC insulated copper conductor single corefor continuous earthing complete all as specified and as directed by the Engineer in Charge. |
| 124 | Complete all as per item No. 114 above but one light pointcontrolled by two2 way 5 Amps switch. |
| 125 | Taking down carefullyaluminum two core sub main wiring of sizes 6 Sqmm /4 Sqmm cable any type and removing old material from site and making good disurbed surface all as specified |
| 126 | M&L two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge.(Flexible Copper Wire Used In FRLS) Note : 2 run copper conductor and one run earth wire and one run of PVC conduit shall be measured as one unit |
| 127 | M&L two single core PVC insulated cable with copper conductor multi stranded 4 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 4 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge.(Flexible Copper Wire Used In FRLS) Note : 2 run copper conductor and one run earth wire and one run of PVC conduit shall be measured as one unit |
| 128 | S&F Piano switch flush button single pole one way 6 Amp. |
| 129 | Supply and fix switch flush type 5 Amps single pole two way. |
| 130 | S&F socket outlet flush type 2 in 1, 3 pin 6 Amp |
| 131 | S&F socket outlet flush type 2 in 1, 3 pin and 6/16 Amp |
| 132 | S&F Piano switch flush button single pole one way 16 Amp. |
| 133 | S&Fstepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc. |
| 134 | S & F in replacement Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed byEngr in charge. |
| 135 | Supply and fix in replacement sheet metal enclosures forMCB distribution board 230 VoltsSinglepole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed byEngr in charge. |
| 136 | S&F MCB SP 6-32 Amps,\"B\" series 240 Volts. |
| 137 | S&FMCB SPN 32 Amps,\"B\" series 240 Volts |
| 138 | S&F Bell Multi Music type, 240 Volts. |
| 139 | S&F bell push flush type 5 Amps. |
| 140 | S & FLamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 141 | S&F ceiling rose surface backlight, 65 x 50 mm three terminals |
| 142 | Supply and fixing in replacement LED, Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. |
| 143 | Supply and fixing in replacement LED , Tube light fitting 12 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. |
| 144 | S&F in replacement energy efficient LED building secruity lights 1x30W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building all as specified and directed. |
| 145 | S&F PVC body Fresh Air fan 250 mm sweep, 240 Volt AC single phase completed all as specified and directed. |
| 146 | S&F exhaust fan heavy duty metal body with louvers of size 300mm sweep, 1400 RPM and fixing arrangements complete all as specified and directed. |
| 147 | Supply and fix BLDC fan energy efficient ceiling fan sweep size 1200mm,3 aerodynamically designed blades with speed 350rpm motor air delivery 220cmm input power 28W-32W and having remote control complete all as specifed andand directed by Engineer -in-Charge |
| 148 | Supply and fixing Storage water heater(Geyser) 25 lts cap 5 star rating complete with water pipe line connection incl cutting the existing pipe complete all as specified and directed by Engineer-in-Charge.Note: PVC connection 02 Nos (for hot& cold water inlet and outlet) upto 1 mtr length of each included in the unit quoted rate. |
| 149 | M&L earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm diasize means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of6 mm dia MS bar water pipe with wire mesh and connecting testing etc incl taking out old u/s earthing material complete all as specified and directed. |
| 150 | Net Contract Sum will be after deducting Sch of Credit of Rs 2,19,205.00 |
