|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor, etc and jointed in neat cement slurry over and including cement screed 20 mm thick 1:6. and pointed in white or coloured cement to match complete all as specified and as directed. |
| 3 | All as per item above here but in vertical surfaces such as skirting/dado laid over and including a backing coat of 10 mm thick Cement mortar (1:3) complete all as specified and as directed. |
| 4 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tiles exceeding 0.11 Sqm but n.exc 0.18 Sqm as in floor, etc and jointed in neat cement slurry over and including cement screed 20 mm thick 1:6. and pointed in white or coloured cement to match complete all as specified and as directed. |
| 5 | M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:3) finished even and rough, complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc. 15 cm thickness complete all as specified and as directed. |
| 7 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections and laid fair in alternate bays & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic or equivalent filler complete all as specifed and as directed. |
| 8 | M&L 75 mm thick,Cement concrete, type D2, (1:4:8), 40 mm graded aggregate as in path/paving complete all as specified and as directed. |
| 9 | M&L for Chequered cement concrete tiles of size 300 x 300 x 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed. |
| 10 | M&L extra for forming fair finished drain or channel 30 cm and over inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 11 | M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. |
| 12 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointedin anymortar |
| 13 | M&L Machine cut kota stone 18-20 mm thick as in single piece as flooring , treads over &including 25 mm thick rendering in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing/grinding andpolishing & two nos groove cutting line complete all as specified and directed. |
| 14 | M&L Machine cut kota stone 15-18 mm thick as in riser of steps, skirting, dado etc laid over and including 20 mm thick rendering in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing/grinding andpolishingcomplete.h pigment to match the shade of the stone including rubbing/grinding and mirror polishingcomplete all as specified and directed. |
| 15 | Labour only for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 16 | Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L Brickwork with sub class B bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 complete all as specified and as directed. |
| 18 | Material and labour for burnt brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed. |
| 19 | Demolition of reinforced cement conc of any description and in any position complete all as specified and as directed. |
| 20 | M&L for providing precast cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar (1:4), complete with joints to match the surface, complete all as specified and directed. |
| 21 | M&L for reinforced cement concrete (nominal mix)(1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 22 | M&L Cement concrete type D2 1:4:8 (40mm graded aggregate)in foundations, filling and mass concrete complete all as specified and as directed. |
| 23 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securingcomplete all as specified and as directed. |
| 24 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concrete on flat surface, complete all as specified and directed. |
| 25 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 26 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 27 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 28 | M & L for providing plain cementconcrete type C-1, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 29 | M & L for 25 mm thick Cement Concrete 1:2:4 (20 mm Graded Stone Aggregate) type B1as in Flooring, etc. complete all as specified and as directed. |
| 30 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed. |
| 31 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed. |
| 32 | Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates includingfilling of cement mortar or cement concrete necessary fixing lugs, hinges, lock strike plates, and two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 33 | Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates includingfilling of cement mortar or cement concrete necessary fixing lugs, hinges, lock strike plates, and two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 34 | S&F30 mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. |
| 35 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 36 | S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified |
| 37 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting offrame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheetbeading & jointed together with solvent cement all as specified and shown on drawing complete all as specified and as directed. |
| 38 | Supply and fix 30mm thicksecond class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately). |
| 39 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 40 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 41 | S&F 4 mm thick tinted glass of any size with aluminium bedding and complete all as specified and directed. |
| 42 | S&F 4 mm thick frosted/ pin headedglassin ventilatorshuttersall as specified and directed by Engr-in-Charge |
| 43 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 44 | S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised. |
| 45 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws. |
| 46 | S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long. |
| 47 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. |
| 48 | S&F (in repair) MS helical door spring 150 mm size incl roller and roller platefixed to wooden or steel frames with welding etc complete all as specified and directed. |
| 49 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length cover plate 150mm complete all as specified and directed |
| 50 | Supply & fix as in repair 28mm dia curtain harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. with two Nos of socket ,end caps and brakets (decorative type) complete for doors/window opening all as specified and directed. |
| 51 | S&F Mild steel flat iron as in hold fast and similar articles conforming to Fe-290 Gde -E-165 complete. |
| 52 | Dismantling wrought iron or mild steel work of anydescription, in any position complete all as specified and as directed |
| 53 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 54 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 55 | S&F Hard drawn steel wire fabric n. exc 4 kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt. |
| 56 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed. |
| 57 | S & F for Anodised aliminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 ; all as specified and as directed. |
| 58 | S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted. |
| 59 | Dismantling Asbestos Cement with ridge (Corrugated, Semi corrugated etc.) sheets in roof coverings. |
| 60 | S&F Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified. |
| 61 | S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding / eves fixed with self tapping screws to frameas specified. |
| 62 | M&L PCC 1:2:4 type B-I (Using 20 mm graded crushed stone aggregate) as in gap between roof sheets and brick walls, thickness of concrete bed exc 5 cm and not exe 10 cm thickness and notexe. width of onebrick wall thickness including necessary scaffolding and formworkht up to 7 m complete all as specified and directed |
| 63 | S & F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and as directed. |
| 64 | S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor inbore of pipe 15 mmincl taking down of extg pipe . |
| 65 | S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor inbore of pipe 20 mmincl taking down of extg pipe complete all as specified and as directed. |
| 66 | M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 67 | S&F in repairsfancy type bib tap chromium plated 15 mm bore cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 68 | Supply and fix,as in repair,15 mm bore pillar tap,fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 69 | Supply and fix, as in repair, stop valve,cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed. |
| 70 | S&F in repair 15mm dia stop cock/angle stop cock fancy type chromium plated incl CP nipple and socket. |
| 71 | Supply and fix, as in repair,vitreous china wash basin, white,flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste pipe brackets,waste pipe & coupling, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 72 | S&F of PVClow level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed. |
| 73 | Supply and fix,as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 74 | S&F in repairs vitreous China bowl type (back or corner wall type), urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including waste pipe and urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms). (Exclusive of fixing supply pipe to flushing cistern and trap) all as specified |
| 75 | S&F vitreous china urinal partition white of size 310x700 mm |
| 76 | Supply & fixing 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with top) hoisted and fixed in position including float valve all as specified after dismantling of existing. |
| 77 | S&F in repairs 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed. |
| 78 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 79 | S&F in repairTowel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 80 | S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc |
| 81 | S&F in repairbrass choromium platedtowel rail 600 mm long complete all as specified and directed. |
| 82 | S&F in repair swivel shower of brass chromium plated with long head for fixing with 15 mm pipe. |
| 83 | Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed. |
| 84 | S&F in repairs 15 mm bore bib taps, two way, chromium plated, fancy type, cast copper alloy with single handle and wall flange,screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 85 | Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) P Trap white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed |
| 86 | Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed. |
| 87 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 88 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 89 | Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. |
| 90 | S&F PVC (SWR) 110mm dia bends any radius with access door all as specified and directed. |
| 91 | S&F PVC (SWR) junction110mm bore single ( single t) equal or unequal with access door all as specified and directed. |
| 92 | Supply and fix, PVC cowls 110 mm bore all as specified and directed. |
| 93 | Supply and fix, in repairs 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls with access door all as specified and directed. |
| 94 | S&F PVC (SWR) 75 mm dia bends any radius with access door all as specified and directed. |
| 95 | S&F PVC (SWR) junction 75 mm bore single ( single t) equal or unequal with access door all as specified and directed. |
| 96 | M&L for 75 mm dia of outlet PVC(SWR)floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 97 | Supply and fix, PVC cowls75 mm bore all as specified and directed. |
| 98 | S & F for 100 mm bore of pipe stack clamp out of 50mm x 5 mmflat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof. |
| 99 | All asabove but 75 mm bore pipe. |
| 100 | Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft and loose type of soilcomplete all as directed. |
| 101 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed. |
| 102 | M&L 150 mm dia Salt-glazed stoneware drain pipes laid in trenches and jointedcomplete all as directed. |
| 103 | M&L 150 mm dia Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as directed. |
| 104 | Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as directed. |
| 105 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 106 | Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc. |
| 107 | M&L for rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound as per manufacturer instruction for finished even and smooth (without using extra cement) (WPC will be measured and paid separately). |
| 108 | M&L for rendering 15mm thick on Surface other then fair faces of brick work or concrete surfaces even and smooth withoutusing extra cement in CM 1:6 |
| 109 | M&L for two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation surfaceall as directed. |
| 110 | M&L for complete removal of old existing tretment including , washing, rubbing down and stopping of existing painting surfaces and appling two coats of cement base paint over one coat of primer complete all as specified & directed |
| 111 | M&L preparation of old decorated wall surfaces and including applying onecoat of weather coat acrylic exterior emulsion paint complete all as specified and directed. |
| 112 | M/L for rendering 15mm thick neeru finish on Surface other then fair faces of bk work or concrete surfaces even and smooth using extra cement in CM 1:6. |
| 113 | M&LApplying two coats of Oil bound distemper to newly plastered wall over a coat of primer over a thick layer of wall care puttyincluding preparation of newly platsered wallall as specefied and directed. |
| 114 | M&LApplying two coats of Oil bound distemper to wall over a coat of primer over a thick layer of wall care puttyincluding complete removal of existing treatment all as specified and directed. |
| 115 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash as in wall complete all as specified and directed. |
| 116 | M&L preparation of old painted steel surfaces over 10cm width or girthand applying one coatof synthetic enamel paint. |
| 117 | M&L for applying for preparation of old painted surfaces of wood and woodbasesurfaces of any description , not otherwise described over 10 cm width or girth and applying one coat ofsynthetic enamel paint all as specefied and directed. |
| 118 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. |
| 119 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 120 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. |
| 121 | Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC rigid conduit (medium grade) including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including connected modular items/fixture like modular metal flush box,base/cover plate for switch/sockets etc including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- |
| 122 | One light/fan point controlled by one,one way switch. |
| 123 | One 3 Pin 5 Amps socket out let point onindependentboard. |
| 124 | One 3 Pin 5 Amps socket outlet point on same board alongwith other suitable switchs. |
| 125 | One bell point controlled by one push button switch. |
| 126 | All as per item above here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed. |
| 127 | Supply and fixing in repair of modular switch one way 6 amps 1 module 240 Volts incl taking down old unsv one complete all as specifed/directed. |
| 128 | Supply & fixing in repair of modular type,1 module 16 Amps one way switch 240 Volt AC including taking down old unsv complete all as specified directed. |
| 129 | Supply & fixing in repair of modular socket out let 2/3 pin 6 Amps combined 2 module 240 Volts incl taking down old unsv one complete all as specified / directed. |
| 130 | Supply & fixing in repair of modular type, 2 module,6/16 Amps combined socket 240 Volt AC including taking down old unsv complete all as specified / directed. |
| 131 | Supply and fixing in repair of modular bell push 6 amps 1 module 240 Volts incl taking down old unsv one complete all as specifed/directed. |
| 132 | Supply and fixing in repair of modular fan regulator for BLDC fans, 2 module 240 Volts complete all as specifed. |
| 133 | Supply and fixing in repair ofceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed. |
| 134 | S&F in repair of Lamp holder, PVC/ polycarbonate type with cord grip cap suitable for pendate fittingsincluding taking down old unsv ones complete all as specified and as directed. |
| 135 | S &F in repair of Bell buzzer, Ding Dong AC. 230 volts, single pole incluing taking down old unsv ones completed as directed. |
| 136 | S & F in repair Surface and wall mounted LED batten 20 watt 4ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050 Lumens, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. |
| 137 | S & F in repair Surface and wall mounted LED batten 10 watt 2ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 2200 Lumens, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. |
| 138 | Supply and fixing in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 139 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 140 | S&F of AC short circuit protection motor starter with 25 Amps MCB protected power unit 230 Volt complete all as specified and directed. |
| 141 | S&F VTPN DB,MCCB incomer,4 ways double door,Metal door ,IP-43 IK 09 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+24complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and as direct. Make: ABB cat part No IP-VTPN04WAY MCB/IC MD DB or equivalent in Legrand/Havells |
| 142 | S&F MCCB 4P 125 Amps 415V ,50 Hz ,breaking capacity 16 KA . Including dismantling taking down unsvericeable one. |
| 143 | Supply and fixing in repair of MCB TPN DB 4 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 144 | Supply & fixing in repair of MCB TPN 63 Amps \"C\" Series 10 KA 415 volts complete all as specified /directed. |
| 145 | Supply and fixing in repair of MCB SPN DB 12 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 146 | Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. |
| 147 | Supply and fixing in repair of MCB SPN 32/40 Amps \"C\" series 10kA 240 volts complete all as specified and diretced. |
| 148 | Supply and fixing in repair of MCB SP 6-32 Amps \"C\" series 10kA 240 volts complete all as specified and diretced. |
| 149 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete all as specified and diretced. |
| 150 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers complete all as specified and diretced. |
| 151 | M&L for painting of ceiling fans,any type/size after taking down complete,in situ with synthetic enamel paint by spraying, incl filling cavities with filler,one coat after cleaning all dust etc and refixing the fan to its original positioing incl providing suitable size clamps & down rods for hanging and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified& as directed. |
| 152 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and diretced. |
| 153 | Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 154 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiringfor connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 155 | M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge. Note : For the purpose of payment only punned thickness will be measured. |
| 156 | M&L for brick protection cover of size 230x115x75 mm to LT underground cables with sub class \"B\" over burnt brick, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. |
| 157 | Boring/Drilling (horizontally) manually under min 0.5 to 2 m deep in soilbelow existing road suitable for passing GI tubing of 40 to 80 mm bore complete all as specified. |
| 158 | Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete as specified and directed . |
| 159 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core incl taking down old unsv complete all as specified & as directed. . |
| 160 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core incl taking down old unsv complete all as specified & as directed. . . |
| 161 | Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron GI strip of size 25x4 mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantaling old unsv onescomplete all as specified and as directed by the Engineer-in-Charge. |
| 162 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. |
