|
| 1 | Material & labour for Anodised aluminium snap gridframe work for false ceiling including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm longcomplete all as specified and as directed. Note:Ceiling boards will be measured and paid separtely. |
| 2 | Supply & fix 5mm thick plain embossed PVC false ceiling boards of size 600mmx600mm of density 600kg/cum, plain colour decorative type fixed toAluminium grid frame work complete all as specified and as directed. Make : SMP MAGMA or equivalent. |
| 3 | Dismantling boarding, anydescription, fixed in any position with screws all as specified and as directed. |
| 4 | Material & labour for Providing and fixing Powdercoated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/appropriate Z sections and othersections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners ofrequired dia and size, includingnecessary filling up the gaps atjunctions, i.e. at top, bottomandsideswithrequiredEPDMrubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all asspecified and as directed. |
| 5 | Material & labour for Aluminium composite panel 4mm thick of approved colour and shade fixed with self tapping screws on aluminium frame work in suitable shape and size complete all as specified and as directed. |
| 6 | Supply & fix 19mm thick BWP grade Marine plywood (710 grade) having specific gravity more than 0.8, screw holding capacity more than 130Kg and water absorption less than 5% with two tier preservative treatment (Glue line protection and finished panels treated with ACC (Acid Copperchrome compound) as in cupboards/shutters/rifle rack etc fix to 1st class hard wood frames (Teak wood)including necessary cutting for rifle rack complete all as specified and as directed and as per manufacturer\"s instructions all as specified and as directed.Make:Bond 710 by Century Ply/Greenply Note :Necessary fittings will be measured and paid seperately under relevant items. |
| 7 | Material & labour for Plain, solid, straightwooden frame work for cupboards as mentioned in item No 06 here in before, wrought, framed rebatedon the solid, rounded or chamfered,put together with glue pinnedatjoints,suppliedandfixed with wooden plugs all as specified and as directed. |
| 8 | Preparation of new wooden surfaces of any description, over 10cm in width or girth and two coats of synthetic varnish all as specified and as directed. |
| 9 | Supply & fix stainless steel soft closing hydraullic hinges for shutter complete as specified and as directed. |
| 10 | Supply & fix for cupboards locks all as specified and as directed. |
| 11 | Supply & fix for 125mm stainless steel handles, cast type, polished for cupboard shutters, etc complete all as specified and as directed. |
| 12 | Material & labour for 1.00mm thick glossy finish Acrylic laminate of surface finish, colour and pattern as approved, fixed with approved adhesive for fixing over BWP plywood (710gde) /polymer profile foard board (Multiwood) as per manufacturer\"s instructions complete all as specified and as directed. |
| 13 | Material & labour for Wooden table of First class Hard wood with size of 2.20M x 1.00Mx20mm including cutting for & necessary cable manger with four legs & skelton as per design including polishing complete all as specified and as directed. |
| 14 | Supply & fix Wish T Module-Shared side by side 2 Person L shaped Works Station 5\"x4\"Wx2\"D SCHM-2 with additional kb tray per person and Pedestal per person as per the following specifications:-Providing and placing 52.4mm thick 1200mm high panels in wish system with combination of metal raceway at bottom, two intermediate fabric blocks, top tile-fabric tackable, white board, Fabric, Magnetic, providing powder coated legs all as specified and as directed. |
| 15 | Demolition of Concrete of any description andin anypositionnot otherwisespecifically provided for,all as specified and as directed. |
| 16 | Material & labour for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring all as specified and as directed. |
| 17 | Dismantling for plain or corrugated steel sheeting, any gauge, thickness, includingNainital orsimilarpattern roofcoverings all as specified and as directed. |
| 18 | Supply & fix 2mm thick polycarbonate sheet crystaltype and any colour fixed with coach screw and washer in roof/wall etc and jointing with suitable strip as per manufacturer\"s instructions complete all as specified and as directed. |
| 19 | Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good matching to the existing colour to the disturbed surface all as specified and as directed. |
| 20 | Material & labour colour code point wiring FRLSPVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade drawn through PVC conduit of suitable size, concealed / semi concealed/open suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches or sockets regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly complete all as specified and as directed for the following.Note i. Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate.ii.Same size wire shall be used for phase, neutral and earthconductor.iii.The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads. |
| 21 | One Light/ fan/bell point controlled by one switch |
| 22 | One 3 pin socket outlet outlet 5 Amps on the same board with other switches |
| 23 | 5 Amps socket point on independent board |
| 24 | All as per srl item no 20 here in before but 2.5 sqmm for 5/15 Amps socket on independent board all as specified and as directed |
| 25 | Supply & fix in repairs ceiling rose 3 phase/PVC/polycarbonate isolated body all as specified and as directed. |
| 26 | Supply & fix in repairs modular switch one way 6 Amps 1 module all as specified and as directed. |
| 27 | Supply & fix in repairs modular socket 6 Amps 2/3 pin 2 module all as specified and as directed. |
| 28 | Supply & fix in repairs modular socket 6 Amps/16 Amps3 pin 2 module multipurpose all as specified and as directed. |
| 29 | Supply & fix in repairs modular switch one way 16 Amps 1 way 1 module all as specified and as directed. |
| 30 | Supply & fix in repairs modular bell puslh 6 Amps 1 way 1 module all as specified and as directed. |
| 31 | Supply & fix in repairs Bell /buzzer ding dong AC 230 Volts single pole all as specified and as directed. |
| 32 | Supply & fix in repairs Fan step regulator, 120W - 2 module AC 230 Volts all as specified and as directed. |
| 33 | Supply & fix Single pole andneutral enclosure witha two pin and earthplug and socketcomplete with onesingle pole MCB 10 Amps complete all as specified and as directed. |
| 34 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed. |
| 35 | Material & labour sub main wiring using 2 runs of 4.0 Sq mmFRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed/open conduit along with 1 run of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified including taking down the unserviceable wiring all as specified and as directedNote : One run of PVC conduit, 2 runs of 4.0 sqmmPVC insulated copper conductor and 1 run of 4.0 sqmm PVC insulated copper conductor cable will be measured as one unit. |
| 36 | Supply & fix TPN 6 way MCB DB double door 415 volts complete all as specified and as directed. |
| 37 | Supply & fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB32 Amps complete all as specified and as directed. |
| 38 | Supply & fix TPN 40 Amps MCB complete all as specified and as directed. |
| 39 | Supply & fix in repairs MCB SP 6-32 A inDB all as specified and as directed. |
| 40 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and as directed. |
| 41 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as specifed and as directed. |
| 42 | Supply and fixing wall mounted fan 450 mm sweep complete all as specified and as directed. |
| 43 | Material and labour for Earthing with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, washers of GI or steel all as shown in elect plate No 3 of SSR Pt I and connected earth test point all as specified and indicated incl testing etc complete, incl taking down existing earthing all as specified and as directed. |
| 44 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specififed and as directed. |
| 45 | Taking down carefully old ceiling fan any sweep and size from the existing location and fixing that on same location after cleaningincluding greassing the bearing of fan to make well functional after rectify the all minor defects complete all as specifed and as directed. |
