|
| 1 | Schedule \"A\" B/R |
| 2 | Excavation post holes (or similar holes) each not exceeding 0.5 cum getting out in soft/loose soil returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavating in trenches, not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and depth not exceeding 1.5 Metre, and getting out in soft/loose soil, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Returning and filling in soil including levelling, watering and well ramming in layers not exceeding 25cm in foundation trenches, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Removing excavated soil not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and fixing rolled mild steel for roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces etc., confirming to Fe-410-W (Gde-E-250) quality B, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply and fixing Mild steel hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and fixing mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 10 cm long, not exceeding 15 cm long dia metre of neck and not exceeding 5 cm long, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall, as in ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed with self-tapping screws, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fixing 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling etc., complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for preparation new steel surfaces of any description not exceeding 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour for round bars 10mm dia as in line wire for fixing in chain link fencing, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for Moorum/red bajri filling in floors or paving’s, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & Labour for Hard-core of gauge exceeding 63mm but not exceeding 100mm deposited spread and levelled in layers not exceeding 15cm thick watered an reamed to a true surface with broken stone or boulders, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for 100mm thick Plain Cement concrete 1:4:8, type D-2 (using 40mm graded aggregate) as in sub base of floors, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for 100mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in flooring with alternate panel including necessary formwork, Finishing cement concrete surface even and smooth without using extra cement in alternate pannels, adding with fibre reinforcement, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & Labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, type C-1 1:3:6, 20mm graded aggregate in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material & Labour for rendering 10mm thick in Cement Mortar 1:4 for finishing the surface even and smooth w/o using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for PCC 1:2:4 type B-1 (20mm graded aggregate) as in fillets at junctions between roof and parapet walls, copings rounded or chamfered angles, bed plates,plinth courses, filling in pressed steel frame and the like finished fair and even incl necessary form work, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for 450mm bore RCC pipes class NP3 laid and jointed complete with collars, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Removal of excavated soil to a distance exceeding 500 Metre but not exceeding 1000 mtr and depositing where directed at level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material & Labour for walling of Porbandar stone masonry well bonded and solidly hearted built in Cement Mortar 1:6 as in compound wall, etc., complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material & Labour for rendering 10mm thick on fair face of brick work or concrete surfaces in Cement Mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material & Labour for 7mm thick Glazed coloured ceramic tiles in vertical surfaces, area of each tile not exceeding 0.36sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10mm thick rendering on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for 10mm thick outside wall tiles in vertical surfaces, area of each tile not exceeding 0.36 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10mm thick rendering on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material & Labour for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturer’s instructions, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing precast cement concrete louvers and jallies, 35mm thick (measured solid), including all mouldings but excluding frame/ Baluster (Precast frame/Baluster shall be measured and paid separately), complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & Fixing for precast cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) interlocking designer pillars/ Balusters (Size- 100mm x 100mm) set in Cement Mortar 1:4for fixing louvres and jallies including necessary mouldings, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & Fixing Dotted one way vision decorative vinyl stickers, partially or fully concealed and integrated with district patterns, gradients, and custom 3D designs for interior or exterior applications on door, windows and other glazing partition works including fixing and necessary cutting and pattern formation, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply & Fixing 12mm thick Toughened Glass Door with patch fittings with cover plate of SS-304 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, designer glass handles 2 Nos of 450mm suitable size as directed, Fin Connect Patch Lock etcin each door, including cutting holes in any size in floor and wall, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & Fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing, complete all as specified and directed by Engineer-in-Charge. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 36 | Supply & Fixing 10mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required,complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & Fixing 10mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing Solid PVC Wall lining consisting of 10mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & Fixing 12mm thick Toughened Glass as in Partition with patch fittings with cover plate of SS-304 Grade, necessary accessories etc., including cutting holes in any size in floor and wall, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Fixing 5mm thick glass with film fixed in aluminium frame work with necessary arrangement in squares exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55kg/m including 5.5mm thick tinted glass necessary joining cleats, glazing clips, rubber neoprene packing, fancy handles 2 Nos, Mortice lock 4 lever in each door, snap beading, screws, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of heavy duty and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Material and labour for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & Fixing powder coated aluminium anodised three track sliding window shutter and frame including jointing cleat for fixing frame/chowkhat of window as per JINDAL section code (frame 20831), shutter (20846) including glazing with 4mm thick tinted glass (02 shutters) & SS wire mesh (01 Shutter) necessary fittings, rubber packing, suitable handles, rollers for shutters and locking arrangement etc., complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing Heavy Duty garden and outdoor FRP sitting bench (3 seater) size 160x83x60 cm (approx weighing 48 Kgs), complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to Curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with GI wire mess (Fillets, Metal frame work and GI wire mesh paid separately) but to curved surface, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing GI frame work (size of grid 605mm x 605mm) for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material & Labour for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Material & Labour for applying two coat of oil bound distemper over one coat of primer on surfaces of ceiling, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Material & Labour for applying two coat of oil Bound Distemper over one coat of primer on surfaces of wall, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Material & Labour for providing decorative cornices not exceeding 75mm in width at ceiling & wall or of suitable size made out of Plaster of Paris, complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mmwood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing 150mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing 125mm size Extruded aluminium alloy handles, fabricated type, anodised aluminium handles, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Material & Labour for 100mm long stainless steel Butt hinges, best quality, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Schedule \"A\" E/M |
| 60 | Material & Labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed Multi-stranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non-metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc., fixed concealed/recessed in wall or ceiling etc., including 1.5 Sqmm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire for modular wiring, complete all as specified and directed by Engineer-in-Charge. for the following:-NOTE:1: Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule \"A\". 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed. |
| 61 | One light point /fan point controlled by one switch with cable 1.5 Sqmm |
| 62 | one 3 pin socket outlet 5 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area |
| 63 | one 3 pin socket outlet 5 Amps independent board with cable 1.5 Sqmm nominal area |
| 64 | Material & Labour for Point wiring complete with 2.5 sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy dutyconduit (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc., fixed concealed/ recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multi-stranded copper conductor FRLS cable as earth continuity wire, complete all as specified and directed by Engineer-in-Charge. for the following:-(a) one 3/5 pin 15/16 Amps socket |
| 65 | Supply & Fixing Modular switch 1 way, 10 Amps, 1 module, complete all as specified and directed by Engineer-in-Charge. Make: Legrand (Arteour) / Schneider (zencelo) / hager (berker) |
| 66 | Supply & Fixing Modular switch 1 way, 16 Amps, 1 module, complete all as specified and directed by Engineer-in-Charge. Make: Legrand (Arteour) / Schneider (zencelo) / hager (berker) |
| 67 | Supply & Fixing Modular socket, 6 Amps, 2/3 pin combined 2 module, complete all as specified and directed by Engineer-in-Charge. Make: Legrand (Arteour) / Schneider (zencelo) / hager (berker) |
| 68 | Supply & Fixing Modular socket, 6/16 Amps, 2/3 pin combined 2 module, complete all as specified and directed by Engineer-in-Charge. Make: Legrand (Arteour) / Schneider (zencelo) / hager (berker) |
| 69 | Supply & Fixing Modular fan regulator, 120 watt, 2 modular (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make:Legrand (Arteour) / Schneider (zencelo) / hager (berker) |
| 70 | Supply & fixing modular metal flush box 3 module ISI marked), complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager |
| 71 | Supply & fixing modular metal flush box 6 module ISI marked), complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager |
| 72 | Supply & fixing modular metal flush box 18 module ISI marked), complete all as specified and directed by Engineer-in-Charge.Make: Legrand/Schneider/Hager |
| 73 | Supply & Fixing modular cover plate with frame, 3 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make:Legrand / Schneider / Hager |
| 74 | Supply & Fixing modular cover plate with frame, 6 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make:Legrand / Schneider / Hager |
| 75 | Supply & Fixing modular cover plate with frame, 18 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make:Legrand / Schneider / Hager |
| 76 | Material & Labour for Sub main wiring with two runs of 4.0 sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I including conduit accessories like bends, tees, junction boxes etc including 4.0 sqmm PVC insulated but unsheathed multi-stranded copper conductor FRLS cable as earth continuity wire fixed, complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply & Fixing motion sensor LED Luminaires recessed mounted down lighter 15 watt 5700K system efficiency not less than 100lm/watt, thd<10% single phase including connecting cable from ceiling rose to terminal block of luminaires, complete all as specified and directed by Engineer-in-Charge. Make :Wipro/ Philips/Crompton Greaves |
| 78 | Supply & Fixing 9 W LED spot light with multiple beam tilting angles, no UV radiation and dimmable ballast, complete all as specified and directed by Engineer-in-Charge. Make : Philips/ Wipro/ Havells |
| 79 | Supply & Fixing LED picture light fitting Bronze body finish with flexible neck for adjustment beam, 12 Wattand including connected with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting in position at site, complete all as specified and directed by Engineer-in-Charge. Make: Philips Model No: 30973 /Wipro/ Havells /CG |
| 80 | Supply & Fixing ceiling fans AC single phase 230/240 V of size 1200mm sweep 5 star rating complete with electrical connection providing three core round flexible copper conductor cable of suitable size, complete all as specified and directed by Engineer-in-Charge. |
| 81 | Material & Labour for Modular ceiling rose, 3-Phase / PVC / polycarbonate, isolated body, complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR, complete all as specified and directed by Engineer-in-Charge. Make: Hitachi/Blue star or equivalent make mentioned in Appendix \"B\". |
| 83 | Supply & Fixing metal clad plug & socket board Single pole and neutral enclosure with two pin and earth metal plug & socket complete with 20 Amp MCB SP, C curve, complete all as specified and directed by Engineer-in-Charge. Make- Anchor/Legrand/L&T |
| 84 | Supply & Fixing RJ11 telephone jacks 1 module with pressed steel sunken box with modular jack connector with 1/4 turn terminal for fast connection, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager |
| 85 | Supply & Fixing TV Co-Axial socket -1 module, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager |
| 86 | Supply & Fixing TV modular switch blanking plate, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager |
| 87 | Supply & Fixing MCB (DB) SPN 8 way double door 415 V made of sheet metal enclosure for MCB\"s as incoming and SPN/SP MCB as outgoing, complete all as specified and directed by Engineer-in-Charge. Make: Hager / Legrand/ Schneider |
| 88 | Material & Labour for MCB SPN pole 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002of 32 Amps Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge. |
| 89 | Material & Labour for MCB SP 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 6-32 Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge. |
