|
| 1 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed.Notes :- (i) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (ii) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and allcomplaint will be rectified by the contractor with insame daythan the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge,If he fails to complete the work with in same day then recovery will be made @ Rs. 150.00 per complaint per day. |
| 2 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work andcarryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails and white cement to make water supply/ plumbing lines functional and leak proof, complete all as specified and directed.Notes :- (i) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (ii) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and allcomplaint will be rectified by the contractor with insame daythan the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge,If he fails to complete the work with in same day then recovery will be made @ Rs. 150.00 per complaint per day. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 4 | M&L for non skid coloured ceramic tiles area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, 7mm to 8mm thick as in floor finishes, skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 5 | M&L for 10mm thick vitrified ceramic tiles, any colour (square or rectangular), polished, double charged, area of each tile exceeding 0.36 Sqm (size 600mm x 600mm) but not exe 0.42 Sqm as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 6 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor/ stair case, base of tiles/stones, complete all as specified and directed. |
| 7 | M&L for glazed ceramic tiles (coloured) on vertical surfaces of size 450x350x7mm / 350x250x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed. |
| 8 | M&L for Granite (of any type) 18-20mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even andsmooth mixed with water proofing compound, complete all as specified and directed. |
| 12 | M&L for 5mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even andsmooth mixed with water proofing compound, complete all as specified and directed. |
| 13 | M&L for prepration of new decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty including, complete all as specified and directed. |
| 14 | M&L preparation of surfaces and applying three coats of white wash on new surface of ceiling, complete all as specified and directed. |
| 15 | M&L for preparation of syrfaces and applying two coats of cement base paint over newly plastered surfaces of wall including one coat of primer, complete all as specified and directed. |
| 16 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 17 | M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth with using extra cement, complete all as specified and directed. |
| 18 | Demolation of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc, complete all as specified and directed. |
| 19 | M&L for brick work with sub class \"B\" bricks, old size, straight or curved on plan exc 6 mtr mean radius butt in CM 1.6, complete all as specified and directed. |
| 20 | M&L for half brick thick work with sub class \"B\" brick, old size, straight or curved on plan exc 6 mtr mean radius but in CM 1:4, complete all as specified and directed. |
| 21 | Taking down chowkats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 22 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 23 | M&L for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete , frame size 125mm x 60mm including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 24 | M&L for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete , frame size 105mm x 60mm including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 25 | S&F factory made 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 26 | S&F factory made flush shutters 30mm thick solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 27 | S&F 35 mm thick 2nd class hard wood glazed and skeleton factory made Panel shutters open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters, complete all as specified and directed. |
| 28 | M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame/ hold fast, complete all as specified and directed. |
| 29 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified and directed. |
| 30 | Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed withhollow profile section using 3mm thickPrelam PVCsheet using screws. Hollow PVCprofile shall belipped with 10mm (5mmx2) thickx 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc, complete as permanufacturer\"sspecification and drawing and directed by Engr-in-Charge. |
| 31 | Dismantling of steel window of any description and fixed in any position including grill etc, complete all as specified and directed. |
| 32 | S&F powder coated (of approved colour) aluminium sections as in frame & shutter of doors, windows (hung/ sliding), ventilators (louvers/ fixed type) and fixed frame etc, fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed. |
| 33 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 34 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 35 | S&F aluminum anodised bolts barrel tower bolts with bright both 150mm long, complete all as specified and directed. |
| 36 | S&F aluminium alloy anodised sliding door bolt of 300mm length with hasp & staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 37 | S&F alunminium handle cast type, 150mm long, oval type, complete all as specified and directed. |
| 38 | M&L for preparation of new wooden surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pinkprimer, complete all as specified and directed. |
| 39 | M&L for preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimered surface, complete all as specified and directed. |
| 40 | S&F in replacement of vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern ) white including fixing bolts,including connection \"P\" trap etcto drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed. |
| 41 | S&F in replacement of vitreous china squatting pan ‘Orissa’pattern size 580X440mm, white with integral foot rest (Excludingflushing system and flush pipe) with ‘P’ or ‘S’trap, complete all as specified and directed. |
| 42 | S&F in replacement of 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long, complete all as specified and directed. |
| 43 | S&F in replacement of viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 xincl6mm embedded in PCC block with PCC 1:2:4 type B-1 and Incl 450mmPVC waste pipegetting with holes, complete all as specified and directed. |
| 44 | S&F in replacement of wash basins, vitreous china flat back, size 580mm x 450mm (excludingCP pillar tap) including 32mm dia waste coupling, 15mm dia 450mm long PVC connection, 32mm dia PVC waste pipe & angle brackets of size 30x30x5mm thick & 450mm long, complete all as specified and directed. |
| 45 | S&F in replacement of vitreous china bowl urinal flat back size of 465mm x 355mm x 265mm, white (miniumum) with grating & union for discharge pipe (excluding flushing cistern) including waste fittings, complete all as specified and directed. |
| 46 | S&F in replacement of pillar tap cast copper alloy, fancy type with capstan head handles, chromium plated, screwed down high pressure with or without lettered, Hot or Cold with long screwed shanks and fly nuts, screwed of iron pipe of bore 15mm, complete all as specified and directed. |
| 47 | S&F in replacement of PVC connection of 15mm dia with PTMT nuts of length 450/600mm, complete all as specified and directed. |
| 48 | S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 49 | S&F in replacement of chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 50 | S&F in replacement of 600mm x 450mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 51 | Taking up or down 15mm dia steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 52 | Taking up or down 20mm dia steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 53 | Taking up or down 25mm dia steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 54 | M&L for GI tubes, medium grade of bore 15mm including all fixing, accerroies and laid in ceilings or laid in floors or fixed to walls, complete all as specified and directed. |
| 55 | M&L for GI tubes, medium grade of bore 20mm including all fixing, accerroies and laid in ceilings or laid in floors or fixed to walls, complete all as specified and directed. |
| 56 | M&L for GI tubes, medium grade of bore 25mm including all fixing, accerroies and laid in ceilings or laid in floors, complete all as specified and directed. |
| 57 | S&F in replacement of angle valve / stop valve, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore, complete all as specified and directed. |
| 58 | S&F in replacement of 15mm dia bib tap, cast copper alloy, fancy type chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 59 | S&F in replacement of bib tap standard of PTMT of any colour of high pressure, screwed for 15/20mm iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), complete all as specified and directed. |
| 60 | S&F in replacement of concussive push button taps of 15mm bore dia of cast iron, screwed for iron pipe and fixed, complete all as specified and directed. |
| 61 | S&F self-closing tap of 15mm bore, cast copper alloy, chromium plated, screwedfor iron pipe and fixed, complete all as specified and directed. |
| 62 | S&F in replacement of 32/40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms / 40mm-60 gms), complete all as specified and directed. |
| 63 | S&F moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 1000 Ltrs including dismantling & remove old tank from site, complete all as specified and directed. |
| 64 | S&F moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 2000 Ltrs including dismantling & remove old tank from site, complete all as specified and directed. |
| 65 | S&F rotational moulded polyethylene water storage tank of capacity 5000 litres, triple layered, UV stabilised, ISI marked, complete with threaded inlet, outlet, overflow and washout connections, fixed on roof slab including making suitable holes, providing necessary fittings, testing for leakage and commissioning, complete all as specified and directed. |
| 66 | S&F in replacement of 25mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipes including fittings as required at site, complete all as specified and directed. |
| 67 | S&F in replacement of ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 15mm bore iron pipe or brass ferrule, complete all as specified and directed. |
| 68 | S&F in replacement of ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 20mm bore iron pipe or brass ferrule, complete all as specified and directed. |
| 69 | S&F in replacement of ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 25mm bore iron pipe or brass ferrule, complete all as specified and directed. |
| 70 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors, finished the surface even and smooth using extra cement, complete all as specified and directed. |
| 71 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floors, finished the surface even and smooth using extra cement, complete all as specified and directed. |
| 72 | M&L for machine pressed concrete interlocking paver block, glossy finish, any shape and size, confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, complete all as specified and directed. |
| 73 | M&L for 25mm thick sand cusioning under paver blocks or filling under floors,complete all as specified and directed. |
| 74 | M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick each,machine pressed, set & jointed in neat cement slurry as in floors, joint fiil up with white grey cement & pigments all including 15mm thick screed bed with CM 1:4, complete all as specified and directed. |
| 75 | S&F in replacement of CP towel ring, fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and directed. |
| 76 | S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm, complete all as specified and directed. |
| 77 | S&F aluminium (extruded section body) door closer, hydraulically regulated, designation No.1, universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 Kg, complete all as specified and directed. |
| 78 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets, complete all as specified and directed. |
| 79 | S&F 4mm thick non asbestos fibre cement ceiling board, panel size 605mm x 605mm each, designed ceiling, conforming to IS-14862, type \"B\" category threeinclusind snapgrid frame work, hold fast, suspenders, complete all as specified and directed. |
| 80 | Dismantling of CGI/ AC or any otherssheet of any description incl ridges etc, complete all as specified and directed. |
| 81 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 82 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 83 | S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls at any height with MS clamps of suitable size including taking down old existing pipes, complete all as specified and directed. |
| 84 | S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls at any height with MS clamps of suitable size including taking down old existing pipes, complete all as specified and directed. |
| 85 | Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed. |
| 86 | S&F solid PVC wall lining (Wall Panelling), consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame, complete all as specified and directed. |
| 87 | S&F in replacement of jet spray, brass, chromium plated, heavy duty, including flexible pipe of 15mm bore with suitable length for EWC, complete all as specified and directed. |
| 88 | S&F in replacement of health faucet including flexible hose of 15mm bore water connection and wall hook, chrome plated, length 1000mm, fixed to existing CP fitting, complete all as specified and directed. |
| 89 | S&F in replacement of soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 90 | S&F in replacement of shower rose, brass, chromium plated, 125mm dia with or without swivel joint with & including CP brass arm and wall flange, fixing to steel pipe or union, complete all as specified and directed. |
| 91 | S&F in replacement of glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed. |
| 92 | S&F in replacement of centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered \"Hot\" & \"Cold\" with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe connection, complete all as specified and directed. |
| 93 | S&F in replacement of bathroom mixer, brass, chromium plated, fancy type with capstan head handles, screwed down high pressure with lettered \"hot\" and \"cold\", including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 94 | Cleaning of PVC/ RCC water tanks of any type and size and washed with clean water, complete all as specified and directed. |
| 95 | S&F 75mm bore PVC (SWR) floor trap with stainless steel grating including jointing to waste pipe, fixed in cement with solvent cement including taking down old PVC or CI floor trap of any type, complete all as specified and directed. |
| 96 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 97 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) cover slabs (for manholes/ drain etc) and similar articles with plain faces as requied for drain cover, set in cement mortar 1:6, complete all as specified and directed. |
| 98 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 99 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, shafts, wells, cesspits, manholes, pier holes etc. and getting out in any type of soil, complete all as specified and directed. |
| 100 | Removing excavated material (soils) to a distance not exceeding 50 mtr and depositing where directed at level not exc. 1.5 mtr above the starting point, complete all as specified and directed. |
| 101 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 102 | Cutting into existing manholes for connecting new drains of 150mm dia (internal bore), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), smooth finished and reforming benching as required, complete all as specified and directed. |
| 103 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, bed for laying sewage lines or mass concrete, complete all as specified and directed. |
| 104 | Demolition and breaking up of drain pipe of 150mm to 300mm bore (salt glazed stoneware, AC or reinforced concrete), set in cement mortar, complete all as specified and directed. |
| 105 | M&L for HDPE DWC (double wall corrugated) pipes, confirming to IS-16098 of DN/ID 180mm dia, pressure rating SN-08, fixed with rubber seal and coupler required with and including suitable bends 90/60/45 degree etc. Single Y Jn complete as required fixed as per manufacturer\"s instructions, laid in trenches for sewage lines, complete all as specified and directed.Note :- Rates shall be deemed to include for pipes, bends any size, any type \"Y\" Jn, coupler/adapter etc. as required and net total length of pipes with fittings shall be measured as one unit/ RM. |
| 106 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
