|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removingand rubbish off the premises, complete all as specified and directed. |
| 2 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis up to 5 KM etc, complete all as specified and directed. |
| 3 | Demolition stone slabs and tiles laid beded and pointed of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 4 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 5 | M&L for non skid ceramic coloured tiles of 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 6 | M&Lfor coloured glazed ceramic coloured tiles 350X250X7/ mm x 450X350X7 mm on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10 mm thick rendering on fair faces of brick /concrete surfacesin cement mortar 1:4 and fair to recive tiles as in skirting/dado etc, complete all as specified and directed. |
| 7 | M&L for vitrified light shade ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4, ccomplete all as specified and directed. |
| 8 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including grinding and polishing with rounding to edges of stone slabs one edg complete including 15mm thickbacking coat CM 1:4, complete all as specified and directed. |
| 9 | M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement, complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering into two layers consisting 10 mm thick in CM 1:4 followed by 5 mm thick in CM 1:4 on fair faces ofbrick work or concrete surface including finished even and fair, complete all as specified and directed. |
| 11 | M&L for rendering 5mm thick on ceiling surfaces in CM 1:3 including finished even and fair, complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of walland applying two coat of oil bound distemperover one coat of primer & 1mm thick wall putty, complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of walland applying two coat of cement base paint over one coat of primer, complete all as specified and directed. |
| 15 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed. |
| 16 | M&L for brick work with sub class \"B\" bricks, old size, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 17 | All as per serial item No. 16.00 here-in- above but except bricks using existing bricks including cleaning etc, complete all as specified and directed.Note :- Old bricks obtained against dismantling/demolition shall be used after properly ceaning. |
| 18 | M&L forwalling of random rubble stone masonery, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed. |
| 19 | All as per serial item No. 18.00 here-in- above but except stone, complete all as specified and directed.Note :- Old stone serviceable obtained against dismantling shall be used. |
| 20 | M&L for raised pointing to random rubble stone mosonery uncoursed on brought upto course on masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed. |
| 21 | M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,etc including necessary formwork as required, complete all as specified and directed. |
| 22 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 23 | M&L for demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 24 | M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed. |
| 25 | M&L for reinforced cement concrete 1:2:4 (nominal mix) type A-1 (using 20mm graded crushed stone aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 26 | Use and waste of formwork to rough finished concrete surfaces, soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 27 | Providing 50 mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 28 | M&Lfor water proofing treatment to the sunken portion area of each sunken portionwith removing of exiting treatment with demolition of existing floor any type up to depth nexc 0.6m including filling of floor with PCC (1:4:8) using 40mm graded aggregateWC & P/S trap and cleaning with wire brush , one coat of bitumen @ 1.7 Kg per sqm , 15mm th plaster in CM 1:4on all sides portion, one 450mm long 32 mm dia spout .water proofing powder 3% mixed by weight of cement, complete all as specified and directed. |
| 29 | S&F in replacement of WC (Squattpattern ) including cement concrete bedding , size 580 x 440mm including PVC\"P or s trap front and back inlet and with internal foot rests(excluding flushing cistern ) including flush pipeand connector pices of PVC and removed old CIPipe including demolition of PCC uptp 450mm depth, complete all as specified and directed. |
| 30 | S&F in replacement of wash down water closet (Pedestal pattern), complete with Pedestal pan and P trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including PVC Seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipe, complete all as specified and directed. |
| 31 | S&F in replacement of PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes, complete all as specified and directed. |
| 32 | S&F in replacement of wash basin, vitreous china (flat back or angle back type)size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand including CP wastecoupling 32mm and PVC waste pipe 32mm bore, complete all as specified and directed. |
| 33 | S&F in replacement ofvitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with pvc connection 15mm size with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste Ccupling, complete all as specified and directed. |
| 34 | S&F toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 35 | S&F in replacement of chromium plated, 15mm dia Swan Neckpillar cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 36 | S&F in replacement of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 37 | S&F in replacement of PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 38 | S&F in replacement of health faucet CP brass with 8mm dia ,1 mtr long flexible tube with wall hook, complete all as specified and directed. |
| 39 | S&F in replacement of jets of EWC\"s with required sizeof jet pipe (flexible) and connections etc, complete all as specified and directed. |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaningor removal to store (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed. |
| 41 | S&F PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints fixed to walls/floor with stack clapms and fixed with nut and bolts, complete all as specified and directed. |
| 42 | S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls/floor with stack clapms and fixed with nut and bolts, complete all as specified and directed. |
| 43 | S&F PVC (SWR) bends with access door any radius of bore 110mm, complete all as specified and directed. |
| 44 | S&F PVC (SWR) bends with access door any radius of bore 75mm, complete all as specified and directed. |
| 45 | S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 110mm, complete all as specified and directed. |
| 46 | S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 75mm, complete all as specified and directed. |
| 47 | Cleaning of water tank of capacity exc 250 ltrs but not exc 500 ltrs including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, complete all as specified and directed. |
| 48 | Cleaning of water tank of capacity exc 500 ltrs but not exc 1000 ltrs including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, complete all as specified and directed. |
| 49 | Cleaning of water tank of capacity exc 1000 ltrs but not exc 2000 ltrs including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, complete all as specified and directed. |
| 50 | Dismantling water tank and removing to store, capacity exc 250 litres but not exc 500 litre with all necessary fittings, complete all as specified and directed. |
| 51 | Dismantling water tank and removing to store, capacity exc 500 litres but not exc 1000 litre with all necessary fittings, complete all as specified and directed. |
| 52 | Dismantling water tank and removing to store, capacity exc 1000 litres but not exc 2000 litre with all necessary fittings, complete all as specified and directed. |
| 53 | S&F 3 layer rotational moulded polyethylene water storage tanks, 500 ltrs capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I, complete all as specified and directed. |
| 54 | S&F 3 layer rotational moulded polyethylene water storage tanks, 1000 ltrs capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I, complete all as specified and directed. |
| 55 | S&F rotational moulded (3 layered as per IS:12701) polythylene water storage tank cylindrical vertical with closed top hoisted capacity 2000 ltrs ISI marked with valid CML No and fixed in position, complete all as specified and directed. |
| 56 | Taking up or down steel tubing and connections, includingcleaning for refixing or removal from site to store bore of pipe 15mm, complete all as specified and directed. |
| 57 | Taking up or down steel tubing and connections, includingcleaning for refixing or removal from site to store bore of pipe 20mm, complete all as specified and directed. |
| 58 | Taking up or down steel tubing and connections, includingcleaning for refixing or removal from site to store bore of pipe 25mm, complete all as specified and directed. |
| 59 | M&L for GI tubes, medium grade of bore 15mm including all fixing, accerroies and laid in ceilings or laid in floors or fixed to walls, complete all as specified and directed. |
| 60 | M&L for GI tubes, medium grade of bore 20mm including all fixing, accerroies and laid in ceilings or laid in floors or fixed to walls, complete all as specified and directed. |
| 61 | M&L for GI tubes, medium grade of bore 25mm including all fixing, accerroies and laid in ceilings or laid in floors, complete all as specified and directed. |
| 62 | S&F in replacement of bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site, complete all as specified and directed. |
| 63 | S&F of CP shower with arm 15mm size 195mm long with bend of 45 degree with flange including taking down the existing UNSVshower of any type/shape, complete all as specified and directed. |
| 64 | S&F angle cock 15mm dia chromium plated fittin as required at site and taking down existing unserviceable angle cock, complete all as specified and directed. |
| 65 | S&F in replacement stop valve concealed type long shank chromiumplatedbrass fancy screwed down high pressure with crutch or butterfly handle dia 15mm screwed both ends for iron pipe or for unions and fixed including fittings as required at site, complete all as specified and directed. |
| 66 | S&F in replacement of plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 67 | S&F looking mirror of size 600mm x 450mm x 5mm thick with Plywoof commercial type fixed on back side and wooden frame, complete all as specified and directed. |
| 68 | S&F in replacement ofPVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mmwith mirror on front doorand with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc, ccomplete all as specified and directed. |
| 69 | S&F in replacement of chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 70 | S&F in replacement of waste fittingsbrass chromium plated for glazed ware sink,sink coupling, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 40/32mm dia, complete all as specified and directed. |
| 71 | S&F in replacement of CP brass grating 100mm dia, centre hole, complete all as specified and directed. |
| 72 | S&F in replacement of PTMT ball valve 20mm dia high pressure with polythene float and fly nut, complete all as specified and directed. |
| 73 | M&L for applying two coats of synthetic enamel paint on new wooden surfacesincluding preparation of newly wooden surfaces over a coat of pink primer, complete all as specified and directed. |
| 74 | M&L for cement concrete 1:2:4 type B-0 using (12.5mm graded crushed stone aggregates) as in filling in the pressed steel door frame/hold fast, complete all as specified and directed. |
| 75 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed.Notes :- (i) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (ii) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and allcomplaint will be rectified by the contractor with insame daythan the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge,If he fails to complete the work with in same day then recovery will be made @ Rs. 150.00 per complaint per day. |
| 76 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work andcarryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails and white cement to make water supply/ plumbing lines functional and leak proof, complete all as specified and directed.Notes :- (i) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (ii) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and allcomplaint will be rectified by the contractor with insame daythan the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge,If he fails to complete the work with in same day then recovery will be made @ Rs. 150.00 per complaint per day. |
| 77 | S&F in replacement of stainless steel 25mm dia (curtain rod) with fixing of domes, with stainless steel brackets etc, complete all as specified and directed. |
| 78 | S&F in replacement of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 1040mmx 510mmx 203mm bowl size 510mm x 405mm x 203mm, complete all as specified and directed. |
| 79 | S&F in replacement of sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 80 | Taking down chowkats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 81 | Taking down and refixing in same opening of wooden/PVC shutters of any description after easing/cutting as per requirement exc 1.0 Sqm but not exc 2.0 Sqm each shutter, complete all as specified and directed. |
| 82 | S&FsolidPVC door frameofsize 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per, complete all as specified and directed. |
| 83 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing. |
| 84 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 85 | S&F in repair of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 86 | S&F 4mm thick plain/pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 87 | S&F 4mm thick plain/pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 88 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete all as specified and directed. |
| 89 | S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 90 | S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed. |
| 91 | S&F 100mm longSteel Butt hinges, heavy weight, cold rolled and fixed, complete all as specified and directed. |
| 92 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 93 | S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 94 | S&F MS helical door spring 150mm size including roller and roller platefixed to wooden or steel frames with welding etc, complete all as specified and directed. |
| 95 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 96 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 97 | S&F pressed steel frames, size 125 mm x 60 mm. for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 1:2:4,type B-0 using 12.5 mm graded crushed stone aggregates filling inside hollow section etc, complete all as specified and directed. |
| 98 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides and both face is covered with decorative face sanmika (pattern and design directed by (Engr-in-Charge)with lipping/frame to match and polished onsides of shutters, complete all as specified and directed. |
| 99 | S&F 35 mm thick 2nd class hard wood glazed and skeleton factory made Panel shutters open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters, complete all as specified and directed. |
| 100 | Taking down shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed. |
| 101 | S&F in repair/ replacement of 18mm thick prelaminated medium density fibreboards, glossy finish/UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancingwhite lamination fixed with screwsas in cup board, shelves, kitchen cabinet etc, complete all as specified and directed. |
| 102 | S&F 100mm long aluminium anodised hasp and staple, complete all as specified and directed. |
| 103 | S&F in replacement of 100mm longaluminium anodised hasp and staple, complete all as specified and directed. |
| 104 | Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth,but hinges etc to make door or window fully functiona, complete all as specified and directed. |
| 105 | S&F mortice lock with two lever, mild steel body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position, complete all as specified and directed. |
| 106 | Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 107 | S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed. |
| 108 | S&F 4mm thick Non asbestos fibre cement building boards designer fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed. |
| 109 | S&F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed. |
| 110 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge. |
| 111 | S&F 150mm aluminium handles, cast type, anodised, complete all as specified and directed. |
| 112 | S&F 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in quare/rectangular exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 113 | S&F 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular not exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 114 | S&F 5mm thick printed colour PVC sheet as in aluminium doors/ partitions fixing wirh rubber neoprene packing and powder coated aluminium beading, complete all as specified and directed. |
| 115 | S&F in replacement ofdoor closers of aluminium die cast bodyhydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and directed. |
| 116 | S&F for 5mm thickinsulated PVC Wall Lining honeycombed as per sample kept in GE office consisting of PVC Insulated Panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in stripsfeathered at the edges including removing and refixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall panelling as per specifications, complete all as specified and directed. |
| 117 | S&F in replacement of floor door machine suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and directed. |
| 118 | M&L forrendering 10mm thick on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and smooth without using extra cement before application of priming coat, complete all as specified and directed. |
| 119 | M&L for preparation of surface by scrapping and properly cleaning the existing roof treatment in any number of layers up to original RCC roof top surface. Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.451tr/sqm. Apply third and final coat undiluted @0.45ltr/sqm, complete all as specified and directed. |
| 120 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. |
| 121 | S&F factory made (box type) mild steel widow/ventelators glazed and gauged combined shutter with side hung including box type hinges steel peg stay locking arrangement with glazing and gazing bar dovetailed or welded and one shop coat of red oxide primer & twocoat of synthetic enamel paint, complete all as specified and directed.NOTE (i) The window /ventelator shall be fabricated as per drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3(ii) MS fillets,glazing,wire gauges shall be measured and paid for seperately.(iii) One side out to out dimensions shall be measured for payment of combined window (glazed & gauged). |
| 122 | S&F Pre-painted coloured corrugated profiled Galvalume /Zincalume sheet with min 0.50mm TCTwith BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals),complete all as specified and directed. |
| 123 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ ridge/valley gutter/facia of bldg/ fixed with self tapping screws/J hooks/suitable arrangementsas per situation/requirement complete all as specified and directed. |
| 124 | S&F precast jallies 25mm thick in cement concrete 1:2:4 type B-0 (using 20mm graded stone aggregates), measured solid, set in cement mortar 1:4 including all moulding and necessry formwork, complete all as specified and directed. |
| 125 | S&F in replacement of sink wall mixer, brass, chromium plated,fancy type, with capstan head handles screwed down high pressure, withlettered \"hot\" and \"cold\", including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 126 | S&F in replacement of soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 127 | S&F in replacement of toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. |
| 128 | S&F in replacement of plate rack of size 750mm x 750mm x 300mm, made of selected quality 0.63mm thick stainless sheet of shape and design as approved by GE, fixed with brass screws and rawl plugs, complete all as specified and directed. |
| 129 | S&F in replacement of single lever wall mixer 3 in 1, telephonic type, brass, chromium plated,fancy type, with capstan head handles with lettered \"hot\" and \"cold\", screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, complete all as specified and directed. |
| 130 | S&F in replacement of centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered \"Hot\" & \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified and directed. |
| 131 | S&F in replacement of spindle suitable for 15mm bore CP taps/ mixers of any type, complete all as specified and directed. |
| 132 | S&F in replacement of PVC lid with locking arrangements suitable for PVC water tank of capacity upto and including 500 Ltr, complete all as specified and directed. |
| 133 | S&F in replacement of PVC lid with locking arrangements suitable for PVC water tank of capacity exceeding 500 Ltrs andupto and including 1000 Ltr, complete all as specified and directed. |
| 134 | S&F in replacement of waste pipe of dia 32mm for WHB/Sink, complete all as specified and directed. |
| 135 | S&F in replacement of waste pipe of dia 40mm for WHB/Sink, complete all as specified and directed. |
| 136 | S&F in replacement of 32mm bore CP brass waste coupling, suitable for WHB, complete all as specified and directed. |
| 137 | S&F in replacement of 40mm bore CP brass waste coupling, suitable for Kitchen sink, complete all as specified and directed. |
| 138 | S&F in replacement of drawer side channel of std size and including of roller for moving drawer, mild steel bright finish or electrogalvanised, suitable for modular kitchen, complete all as specified and directed. |
| 139 | S&F in replacement of stainless steel multipurpose bracket in wooden drawer/ partitions for storing rations of various types, made of 4mm dia stainless steel rods, fixed in side partitions etc fixed, suitable for modular kitchen, complete all as specifiedand directed. |
| 140 | S&F in replacement of continuouspiano hinges mild steel, bright finish or electro galvanised with width of flap 30mm when open, complete all as specified and directed. |
| 141 | S&F in replacement of 40mm dia cup board knobs, brass polished, fixed with nut, screws and washer of mild steel, complete all as specified and directed. |
| 142 | S&F in replacement of 22mm MS dark brown powder coated curtain rod with end brackets and side brackets with designer end pieces fixed with screw and plugs, complete all as specified and directed. |
| 143 | M&L for complete removal of existing treatment of old decorated surfaces of walls, plasteres or unplastered by washing, rubbing down and stopping of distempred and painted surfaces and applying two coats of oil bound distemper over a coat of primer on wall over and including 1-2mm thick of wall care putty, completed all as specified and directedNote :- Wall care putty shall be applyed in two coat and each coat shall be rubbed and smoothhen by suitable emery/sand paper. |
| 144 | M&L for complete removal of existing treatment on old decorated surfaces of walls, chajja, balcony, facia etc. by brooming down or steel wirebrushing, scraping down smoke soots, moulds, moss efforescent salls, treating oil and greasy spots etc. and applying two coats of cement base paint over a coat of primer on wall, completed all as specified and directed. Note :- Wall care putty shall be applyed in two coat and each coat shall be rubbed and smoothhen by suitable emery/sand paper. |
| 145 | M&L for preparation of plastered or unplastered old surfaces of walls, chajja, balcony, facia etc. by brooming down or steel wire brushing, scraping down smoke soots, moulds, moss efforescent salls, treating oil and greasy spots etc. and applying two coats over 1-2mm thick of wall care putty and applying of exterior emulsion paint white or tinted, complete all as specified and directed. |
| 146 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. in apron, complete all as specified and directed.Notes :- (i) The chemical required for Anti termite treatment shall be purchased from manufacturers/ authorized dealers only and contractor shall produce the purchase voucher etc. to prove the genuineness of the same.(ii) Anti termite treatment shall be got done through an approved specialized agency which is a member of Indian Pest Control Association holding valid license as per Clause 13 of Insecticides Act 1968.Persons employed to do the Antitermite treatment shall be qualified as per Rule 10 of the rules framed under the Insecticides Rule 1971. Agency shall be approved byGE based on request of contractor and contractor shall submit all necessary documents regarding eligibility of agency. (iii) Anti termite treatment shall be carried out with emulsion as mentioned in Particular specifications of makes attached in tender and shall be purchased directly from manufacturer or his authorized dealer. Original purchase vouchers shall be produced to the GE for verification which shall be madatory requirement. |
| 147 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
