Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-02-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-02-2026 |
| 2 | 24-01-2026 | BOQ and make corrigendum | BOQ | 10-02-2026 |
| Sl. No. | Item Description |
| 1 | Dismantling kota, granite, cudappah stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 2 | M&L for machine cut Kota stone flooring 18 to 22 mm thick(size of kota stone slab 18\"x22\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 3 | All as per item No 2.00 here in before but 15-18 mm thick as in risers to steps and skirtinglaid over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed.Note : Risers provided to steps shall be in one piece. |
| 4 | M&L for machine cut Kota stone slabs 18 to 22 mm thickas in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 5 | M&L for machine cut cudappah stone slab 20-25mm thick for cooking platform, verticals of wash basins and sinks etc including cutting chases in wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed. |
| 6 | M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, urinal partition, including full round moulding the outer edge, laid overand including screed bed 20mm thick in cement mortar 1:4jointing, pointingin white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed.Note : Colour and shade shall be asapproved by GE. |
| 7 | M&L for 60mm thick, factory made, chamfered edge, cement concrete interlocking paver blocks (glossy/ rubber matt finish) of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks asrequired size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.Note : Size, shape, pattern and shade shall be asapproved by Engineer-in-Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding and backing removingrubbish off the premises complete all as specified and as directed. |
| 9 | M&L for glazed white ceramic tiles in vertical surfaces as dado of size450x300x6-7mm/300mmx600mmx6-7mm, thick set and jointed in neat cementand pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & as directed.Note: Color, size and shade shall be as approved by Engineer-in-charge |
| 10 | M&L for non skid coloured ceramictiles 8-9 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm (600mmX600mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in CM 1:6 etc complete all as specified & as directed.Note: Color and shade shall be as approved by Engineer-in-charge |
| 11 | M&L for Vitrified tiles double charged (light shade) 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm (600mmX600mm), as in floors etc set and jointed in neat cement slurryand pointed inwhite cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6,complete all as specified and as directed.Note: Color and shade shall be as approved by Engineer-in-charge |
| 12 | Ditto- all as per Item No. 11.00 above but as in skirtingset and jointed in neat cementand pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4complete all as specified and directed. |
| 13 | Surface dressing not exec 15 cm deep in soft/loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, trees not exceeding 30 cm girth (measured one metre above ground level), etc complete all as specified and directed. |
| 14 | Excavation over areas n. exc 1.50m in depth in any type of soil for foundation etc complete all as specified and as directed |
| 15 | Excavation in trenches not exc 1.50m wide and not exc 1.50m deep for foundation etc . or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed |
| 16 | Returning, filling in,including spreading, leveling, watering and well ramming in layers not exc 25cm thick in soil complete all as specified and as directed. |
| 17 | Removing excavated soil to distance not exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed |
| 18 | M&L for supply, laying, jointing and testing of RCC pipes, 150 mm bore dia, class NP2, laid in trenches and jointed with collars in cement mortar 1:1, including demolition of PCC in bedding/haunching with taking down of old RCC /SGSW pipes of 150mm dia and removal of debris out from defence landcomplete all as specified and as directed. Note:-Excavation, earthwork and PCC bed concrete shall be measured and paid for seperately under respective item. |
| 19 | M&L for PCC 1:4:8, type D-2, using 40 mm graded stone aggregates as in concrete bed for 150 mm bore dia drain pipes, any type,including packing under and haunching against the sides of the pipes after they are laid & tested complete all as specified and as directed. |
| 20 | Supply and fixing pre cast manhole cover (LD) of size 12\"x36\"\" made up of steel fibre reinforcement concrete M-30 grade as per IS etc complete all as specified and directed by Engr-in- charge |
| 21 | M&L for moorum filling in floors or paving, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 22 | M&L for hard core of gauge not exc. 63 mm, deposited spread and levelled in layers n. exc. 15cmthick, including watering and rammed etc. complete all as specified and as directed. |
| 23 | Demoltion of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified & as directed. |
| 24 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 25 | M&L for 25mm thick Type B1 1:2:4 (20mm graded aggregate) in as levelling course for floor slabs,as for slope correction of roof, etc complete all as specified and as directed |
| 26 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floorall as specified and as directed. |
| 27 | M&L for brickwork with fly ash bricks, straight or curved on plan, exc 6 m mean redius,built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortarof any description complete all as specified and as directed. |
| 28 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including dismantling of existing stone masonry complete all as specified and as directed. |
| 29 | M&L for flush pointing for new or old surfacesurface to random rubble masonry, uncoursed or brought to course in cement mortar 1:4, including racking out joints etc. complete all as specified and as directed. |
| 30 | Taking downcement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 31 | S&F GI wire cloth 0.90mm dia of wire and 12mm size of mesh, fixed to wall, ceilings, beams etc including all laps and waste with nails,including making V groove in crack portion n exc 10mm deep and n exc 10mm face and rendering with 10mm thick cement mortar 1:3 etc complete all as specified and as directed. |
| 32 | M&L for 15 mm thick rendering in cement mortar 1:4 (using water proofing liquid as per manufacturers instruction) onother thanfair faces of brick/stone masonry surfaces orconcrete surfaces, finished even and fair without using extra cement completeall as specified and as directed. |
| 33 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete/stone masonry surfaces finished even & smooth without using extra cement etccompleteall as specified and as directed. |
| 34 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling finished the surface even & smooth without using extra cement including sagol finish complete all as specified & as directed. |
| 35 | M&L for preparation of new plastered internal surfaces of ceiling and applying two coat ofacrylic distemper of required shade and colour complete including one coat of acrylic primeras per manufacturer\"s specifications in any colour complete all as specified and directed. |
| 36 | M&L for preparation of new plastered internal surfaces of wall and applying two coat ofacrylic distemper of required shade and colour complete including one coat of acrylic primer as per manufacturer\"s specifications in any colour complete all as specified and directed. |
| 37 | M&L for preparation of surface old or newly plastered surfaces of walls and applying minimum 1.5 to 2 mm thick wall care putty complete all as specified and directed. |
| 38 | M&L for preparation of Newly plastered wall surfaces and applying two or more coats of 100% premium exterior acrylic emulsion paint, Alkali & fungal resistance, dirt resistance, of required shade over and including priming coat of exterior alkali resistant primer applied @ 0.90 litre/ 10 sqm on prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed by Engr-in-charge. |
| 39 | M&L forcomplete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping to make surface clean, free from dust, loose paint etc by skilled labour including filling of cracks/holes by acrylic crack filler,applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance of required shade over and including a priming coat of exterior alkali resistant primer on prepared old decorated surfacescomplete all as specified and as directed by Engr-in-charge. |
| 40 | M&L for Preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified . |
| 41 | M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying two coats of acrylic distemper in any colour complete all as specified and as directed. |
| 42 | M&L for Preparation of old decorated surfaces of ceiling and applying two coats of acrylic distemper in any colour complete all as specified and as directed. |
| 43 | Takingdown chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 sqmeach and making good the disturbed surface in CM 1:3 complete all as specified and directed. |
| 44 | Takingdown chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each and making good the disturbed surface in CM 1:3 complete all as specified and directed. |
| 45 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) 100%solid decorative type multipanel wire gauge door shutters of size24 mm thick, having integrated ventilating panels (minimum 02 No.) fitted with stainless steel wire gauge of average width of aperture 1.40mm in both directions and wire of dia 0.36 mm fixed within extruded aluminium sub-frames (20mm x 20mm x 1mm thick)recessed into the WPC frame for additional strength and safety purpose. The shutter shall have WPC top & bottom rails of width not less than 100 mm and 200 mm respectively and intermediate rails of width not less than 160 mm. Vertical stiles for shutter shall be minimum 100mm wide from the sidesThe WPC door shutter shall be made from virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge and as per manufacturer instructions. |
| 46 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 47 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 48 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 49 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 65 x 125 mm, double rebated,comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 50 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 51 | S & F powder coated aluminum windows, three track, made out of aluminium sectionsincluding all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a)Window frame:(i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m)(ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b)Shutter: (i)Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note :Shade shall be as approved by Engineer-in-Charge. |
| 52 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed.Note :Size and Shade shall be as approved by Engineer-in-Charge. |
| 53 | S&F mild steel framed work such as grill, gratings, guard barsetc with end of bars shouldered and/or riveted or forged into spikes, ladders, iron frame, balusters, railings, cooler stand, welded to steel ventilators & windowand similar works conforming to Fe.290, Gde-E-165 complete all as specified and as directed. |
| 54 | S&F collapsible steel gate, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets including taking down of exisiting collapsible steel gate complete all as specified and as directed. |
| 55 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 56 | M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 57 | S&Fin position 4.8 to 5mm thick clear float / frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 58 | S&F 100 mm longSSbutt hinges, medium weight, cold rolled and fixed with screws/welded complete all as specified and as directed. |
| 59 | S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type), bolt not less than 12mm dia and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 60 | S & F 200 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 61 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and as directed. |
| 62 | S&F stainless steel soft auto close hinges of approved design and make suitable for kitchen cabinet and wardrobe shutters, openable at 110 degrees, fixed with suitable screws and washerscomplete all as specified and as directed. |
| 63 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI markedcomplete all as specified and as directed. |
| 64 | S&F in repairs, 18 mm thick WPC Board (Wood Polymer Composite), termite proof, waterproof & screwable & nailable as in fabrication of storage System, cupboards in rooms/kitchen i/c Drawers, shelves, etc. laminated one side with decorativechoice lamination and other side balancingwhite lamination, with 1.5mm thk matching color lipping on the edges of the shutters and the box etc. including necessary fixing arrangement on walls with fasteners, complete all as specified and as directed by Engineer-in-charge. |
| 65 | S&F in repairs, 18 mm thick WPC Board (Wood Polymer Composite), termite proof, waterproof & screwable & nailable as in fabrication of storage System, cupboards in rooms/kitchen i/c Drawers, shelves, etc. laminated both side with white lamination, etc. including necessary fixing arrangement on walls with fasteners, complete all as specified and as directed by Engineer-in-charge. |
| 66 | M&L, 18 mm thick marine plywood as per IS 710, as in fabrication of storage System, cupboards in rooms/kitchen i/c Drawers, shelves, etc. laminatedof any color as approved with high glossy acrylic sheet 2mm thick on one side and other side balancingwhite lamination, with 2mm thk matching color lipping on the edges of the shutters and the box etc. including necessary fixing arrangement, complete all as specified and as directed by Engineer-in-charge. |
| 67 | S&F 100mm size stainless steel recessed handle,of approved design and make suitable for kitchen cabinet and wardrobe shutters, fixed with suitable fixing arrangement complete all as specified and as directed. |
| 68 | S&F continous (Piano) hinges, brass finish of when open 30mm width of flaps complete all as specified and as directed. |
| 69 | S&F in repair magnetic catcher, Double strip (horizontal type),in cupboard/ward robe shutters including fixing wit necessary Stainless Steel screws etc. complete all as specified and as directed. |
| 70 | S&F in repairs mild steel helical door spring 300 mm long ordinary rat tail type including roller and roller plate fixed with screws to wooden frame complete all as specified and as directed. |
| 71 | S&Fin repairs20mm dia stainless steel curtain rod with brackets and finials at both ends as per site requirement including taking down old curtain rods with accessories complete all as specified and as directed.Note: The cost of brackets & knobs shall deemed to be included in the quoted rate |
| 72 | S&F in repairstowel rail60 cm long between flangesall as specified and as directed.Make : Cat No. F5015103CH of CERA or equivalent model of makes specified. |
| 73 | S&F in repairs, corner piece of acrylic (three tier) sheet, colour and design as approved, 30 cm radius fixed with screws all as specified and as directed. |
| 74 | S&F in repairs 5 inches heavy duty Vanilla door stopper mounted with rubber tipof aluminiam alloy body fixed in floorall as specified and directed. |
| 75 | S&F in repairs, 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screws and cup washers complete all as specified and as directed. |
| 76 | Taking up or down 15 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 77 | S&F 15mmbore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 78 | S&F 20mm outer diameter CPVC pipes SDR 11 & brass CPVC SDR 11 fittings in trenches, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 79 | Taking up or down 20 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 80 | S&F 20mmbore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 81 | S&F in repairs, sinks made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 485 mm x 410 mm bowl size 400 mm x 350 mm x 200 mm including CP waste coupling complete all as specified and as directed.Make : Cat No. SBFB 01A of JAYNA or Orra Small of Nirali equivalent model of makes specified. |
| 82 | S&F in repairs, stainless steel sink with drain board made of 1mm thick sheetfor kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 350mm x 185 mm including CP waste coupling complete all as specified and as directed.Make : Cat No. SBSD 05 (RR) of JAYNA orElegance Small of Nirali or equivalent model of makes specified. |
| 83 | M&L in repairs, for water proofing treatment to RCC roof slab, including parapet, comprising with the followingtreatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish outside MoD land.(ii) Screed bed or bedding layer of 10 mm thickcement mortar 1:4 with mixing of WPC as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3kg/sqm. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall beapplied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying two coat of bituminous aluminium paint over the APP modified membrane @ 0.11Kg/sqm. |
| 84 | Supply only liquid water proofing compound complete, ISI mark all as specified and as directed. |
| 85 | S&F in repair rotational moulded polyethylene water storage tanks colour white(cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and as directed. |
| 86 | S&Fin repairs, rotational moulded polyethylene water storage tanks colour white(cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and as directed. |
| 87 | S&F in repairs, bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make : Cat No. F1015151 of CERA or equivalent model of makes specified. |
| 88 | S&F in repairs, two way bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make : Cat No. F1015161 of CERA or equivalent model of makes specified. |
| 89 | S&F in repairs 15mm bore brass chromium plated centre hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make :- Cat No QTF2006461 of Cera or equivalent model of makes specified. |
| 90 | S&F in repairswall mixer for mixing hot and cold water and bend for connecting to shower,15 mm borescrewed for iron pipe and fixed complete all as specified and as directed.Make : Cat No. F1015401 of CERA or equivalent model of makes specified. |
| 91 | S & F in repairs, angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.Cat No. F1015201 of CERA or equivalent model of makes specified. |
| 92 | S&F in repairs, 15mm bore stop valve, angle valve of cast copper alloy, fancy type, chromium plated, long body (concealed type) high pressure screwed for iron pipe complete all as specified and as directed.Make: Cera Cat Part No-F1015361 or equivalent model of makes specified. |
| 93 | S&Fin repairs 20mm dia gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union,ISI marked complete all as specified & as directed |
| 94 | S & F in repair stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as directed. |
| 95 | S&F in repair Soap dish, chromium plated, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 96 | S & F in repairs, PVC connections, 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 97 | S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floorsall as specified andas directed. |
| 98 | S&F in repairs, 110mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wallsall as specified andas directed. |
| 99 | S&F in repairs, 75mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified andas directed. |
| 100 | S&F in repairs, 75 mm dia PVC (SWR) bendsof any radiuscomplete all as specified and as directed |
| 101 | S&F in repairs, 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed |
| 102 | S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap withgrating including jointing to waste pipe with solvent cement complete all as specified and as directed. . |
| 103 | S&F in repairs,Health faucet (ABS Body)suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make : Cat No. F8030111AB of CERA or equivalent model of makes specified. |
| 104 | S&F in repair over head shower rose 125mm size with 200mm long shower arm and wall flangeall as specified & directed by Engr-in-charge.Make : Cat No. F7020111AB of CERA or equivalent model of makes specified. |
| 105 | S & F in repairs vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mmwith integral foot rests (excluding flusing cistern)includingtraps &set in cement concrete as specified including flush pipe and connecting to trap complete all as specified and as directed. |
| 106 | S&F in repairs, vitreous china wash down water closet (pedestal pattern) white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.Make : Cat No. S1053102of CERA or equivalent model of makes specified. |
| 107 | S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacityWhite, with inlet ball valve, float, handlewith 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.Make: Cat No B1010110 of CERA or equivalent model of makes Specified. |
| 108 | S&F in repairs,vitreous china wash basinwhiteof size 550mm x 400mm with bracketsincluding, waste pipe, CP waste coupling 32 mm bore, PVC connection pipe completeall as specified and as directed. Make : Cat No. S2040141 of CERA or equivalent model of makes specified. |
| 109 | S&F 110 mm dia stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 110 | S&F plain basket of 500x480x200mm size fabricated purpose made with stainless steel of grade 304, suitable for sliding under kitchen platform including a pair of telescopic channels ( telescopic channels shall be soft closing, with load capacity miminum 35 kg, length as per requirement, zinc plated) including fixing with steel screws, complete all as specified and as directed by Engineer-in-charge |
| 111 | S&F plain basket of 500x480x150mm size fabricated purpose made with stainless steel of grade 304, suitable for sliding under kitchen platform including a pair of telescopic channels ( telescopic channels shall be soft closing, with load capacity miminum 35 kg, length as per requirement, zinc plated) including fixing with steel screws, complete all as specified and as directed by Engineer-in-charge |
| 112 | S&F cup and suacer of 500x480x100mm size fabricated purpose made with stainless steel of grade 304, suitable for sliding under kitchen platform including a pair of telescopic channels ( telescopic channels shall be soft closing, with load capacity miminum 35 kg, length as per requirement, zinc plated) including fixing with steel screws complete all as specified and as directed by Engineer-in-charge. |
| 113 | S&F perforated cutlery basket of 500x480x100mm size fabricated purpose made with stainless steel of grade 304, suitable for sliding under kitchen platform including a pair of telescopic channels ( telescopic channels shall be soft closing, with load capacity miminum 35 kg, length as per requirement, zinc plated) including fixing with steel screws complete all as specified and as directed by Engineer-in-charge |
| 114 | S&F Pull out 3 tierfor cabinet width of 150mm size, fabricated purpose made with stainless steel of grade 304, suitable for sliding under kitchen platform including a pair of telescopic channels ( telescopic channels shall be soft closing, with load capacity miminum 35 kg, length as per requirement, zinc plated) including fixing with steel screws complete all as specified and as directed by Engineer-in-charge |
| 115 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed. |
| 116 | M&L for point wiringcomplete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990,PVC insulated andunsheathed , FRLS cabledrawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmmcopper conductor cable (multistranded)PVC insulated and unsheathed FRLS cableas earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC holding boards/bakelite sheetsfor mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for one light point or one fan point controlled by one, one way switchNOTES: (a)Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures i.e holders, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc. |
| 117 | All as per serial item No 116.00 here in before but for one 5 pin 6 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals. |
| 118 | All as per serial item No 116.00 here in before but for one 5 pin 6 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 119 | All as per serialitem No. 116.00here in before butfor one light point controlled by 2 two way switches |
| 120 | All as per serialitem No. 116.00here in before butfor one bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 121 | All as per serial item No 116.00 here in before but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet pointon independent board with & including 2.5 Sqmm FRLS cable as earth wire complete all as specified and as directed. |
| 122 | All as per serial item No 116.00 here in before but but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet point on independent board but below the switch board of light points in the same vertical plane/horizontal plane with & including 2.5 Sqmm FRLS cable as earth wire complete all as specified and as directed. |
| 123 | S&F Modular switch single pole one way6/10 Amps 1 module complete all as specified and as directed. |
| 124 | S&F Modular switch single pole one way 16 Amps 1 module complete all as specified and directed. |
| 125 | S&F ModularBell Switch 5/6 Amp 1 Modulecomplete all as specified and as directed. |
| 126 | S&F ModularSwitch 2 way 1 module complete all as specified and as directed. |
| 127 | S&F Modular socket 6 Amp-2/3 pin combined 2module complete all as specified and as directed. |
| 128 | S&F Modularsocket 6 A/16 Amp -2/3 pin combined 2 module complete all as specified and as directed. |
| 129 | S&F Modular fan regulator Step Type, 120W-2 Module Complete all as specified and as directed. |
| 130 | S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & asdirected. |
| 131 | S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & asdirected. |
| 132 | S&Fbell,AC, 230 volts, single phase complete all as specified and as directed. |
| 133 | S&F in replacement decorative ultra slim batten square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXAWP7UN1W020 of Havells or equivalent of makes specified in PS |
| 134 | S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 10 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXACP7IN1W010 of Havells or equivalent of makes specified in PS |
| 135 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6 sq.mm cable and one run of PVC casing & caping shall be measured as one unit. |
| 136 | M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit. |
| 137 | S&F sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed. |
| 138 | S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,\"C\" series, making connection with suitable size of copper lugs etccomplete all as specified and as directed. |
| 139 | S&F in repairs, MCB SPN, AC 240 V, 40 to 63 Amps, 10 KA capacity ,\"c\" series, making connection with suitable size of copper lugs etccomplete all as specified and as directed. |
| 140 | S&F in repairs, MCB DB, double doortype(when MCBs are to be used), single pole and neutral, 240 volts,4 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copperbusbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 141 | S&F in repairs, MCB DB, double doortype(when MCBs are to be used), single pole and neutral, 240 volts,8 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copperbusbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 142 | S&Fin replacement 35 Wattbuilding mounted LED security light fitting complete made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2m long bend to shape requiredfixed to pole / wall with 02 Nos MS clamps made out of flat iron 40x5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting complete all as specified and as directed.Make : Havells Cat No ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent model of makes specified. |
| 143 | M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer andthe GIEarth wire connected upto main earth point/DBs alongwith 15mm dia GI medium grade protection pipeincluding provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape,GI light |
| 144 | grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.Note : Rate of GI earthwire and GI protection pipe upto 7.5 mtr length shall be deemed to be included in this item |
| 145 | Supply & fixexhaust fans PVC body,AC single phase 230/ 240 V of size 250 mm sweep, min 1300 RPM, with min air delivery 750 CMH with louver, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete and fixing on wall with necessary bolts, nuts , washers,etc complete all as specified and as directed by Engineer in Charge. |
| 146 | Supply & Fix of Weather proof SMC Meter boxes of size 700 x 480 x 210 mm Doubled hinged doors and fixing of meters and connections including taking down of Old meters etc and refixingcomplete all as specified and directed by Engr-in-charge. Make: Syntex Cat No GSMB 7450 or equivalent model of makes approved by GE. |
| 147 | S&F glint USB charger, 2 module, 3A all as specified and directed. Make: Indo Asian Cat Part No. 810651 or equivalent in Havells / Anchor / Legrand. |
| 148 | Supply, installing, connecting, testing and commissioning of electric water heater storage type capacity 25 Litres 5 star rated with inner body duly coated for superior corrosion resistance, heavy duty protective anode to protect the inner container from corrosion, Energy saving high density PUF insulation to keep hot water for longer time, precaliberated thermostat, safety valve, fire retardant power cord, Corrosion proof outer body, Colour changing LED indicator, Heavy duty heating element with rated voltage 2 KW, 230 volt, 50 Hz ,vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with hot and cold water connection and electric connectionscomplete all as specified and as directed by Engineer-in-charge. |
| 149 | S&F heavy duty, metallic body with metallic blade & brackets, ISI marked exhaust fan, 300 mm sweep, min 1300 RPM, min air delivery 1050 CMHwith louvers to prevent entry of mouse & birds and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete and fixing on wall with necessary bolts, nuts , washers,etc complete all as specified and as directed by Engineer in Charge. |
| 150 | Supply and fix Surface mounted, decorative round plastic LED luminaire comprising of high brightness LED\"s, IP54 protection, 6 watt, complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceilling rose/connector including taking down old unserviceable light fitting any type complete all as specified and as directed by Engineer-in- Charge. Make :- Havells CAT Part No VIBETRENDRDDLSUR6WLED840Sor equivalent model of makes specified. |
| 151 | Supply and fix modularkitchen chimney auto clean sense with min 1250 cum/hr suction, 185 W rated power smart ON &Auto clean, silent chimney with filterless technology and efficient heat auto clean alongwith flexible duct as per OEM upto exhaust and all other connected accessories and fittings for successful installationof the chimney including necessary civil works complete all as specified and directed by Eng in ChargeMake: Havells ALNAIRCat part No GHKCNAZK000or equivalent model of makes specified. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
