|
| 1 | Work |
| 2 | Removing old decayed damaged existing layer of lime punning before laying new layer of lime punning of wall with proper scrapping very carefully without damaging the old structure and moulding evidence due to existing at site work etc complete |
| 3 | Providing and applying 3mm thick lime punning with special lime mortar mix with Lime, Gum, Batasa, Marble Dust, Belgiri etc. over newly plastered surface semi molded on walls nitches, arches, ornamental design similar to original including removing old decayed very carefully and preparing surface for punning etc. complete in all respect. |
| 4 | Polishing on wood work on floor areawith ready mixed wax polish of approved brand and manufacture : 13.69.1 New work(Museum A) |
| 5 | Provision for providing and fixing for masking on the display artifics inside the museum galleries to protect the dropping of paints and dust during the civil & other works etc complete. (Museum A & B Galleries) |
| 6 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removingit there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. |
| 7 | Provision for providing and fixing of electrical and sanitaryarticles use for toliet blocks including all fitting with labour charges etc complete.Power Plug 5 Amp (Havells or eq) |
| 8 | Power Plug 15 Amp(Havells or eq) |
| 9 | Master Chowk 12 Watt(Havells or eq) |
| 10 | Combined Box Small(Havells or eq) |
| 11 | 2 core copper wire 2.5 Sqmm(Havells or eq) |
| 12 | 18 Watt LED Bulb(Havells or eq) |
| 13 | Tape |
| 14 | Fancy light with high focus(Havells or eq) |
| 15 | LED 22 watt 4 feet(Havells or eq) |
| 16 | MCB 32 Amp single(Havells or eq) |
| 17 | Main MCB 160 Amp 3 Core(Havells or eq) |
| 18 | LED Light 3 ft(Havells or eq) |
| 19 | Spotlight 12 watt (Havells or eq) |
| 20 | Steblizer E.M 5170 (Microtek or eq) |
| 21 | Invertor with 1 battery 800 watt (Luminous or eq) |
| 22 | Invertor with 2 battery 1600 watt (Luminous or eq) |
| 23 | Combined box Power(Havells or eq) |
| 24 | Single core 2.5 Sqmm copper wire (1 bundle= Red, 1 bundle=Black) (Havells or eq) |
| 25 | LED Light 18 Watt(Havells or eq) |
| 26 | LT FN Changeover 63 Amp 4 Core(Havells or eq) |
| 27 | 25 mm thimble |
| 28 | Track Light (Havells/Phillips or eq) |
| 29 | Wave LED Strip 24 W 60D 12 V DC 6500 K rope |
| 30 | Water Tank 500 ltr three layer(Sintex or eq) |
| 31 | Providing and fixing wooden decorative pelmet on top paneling with 12 mm ply board having offsets and groove with required adhesive hard work and labour charges as per design etc. complete. |
| 32 | Manufacture & fixing museum name board made up of 2 nos HPL (High Pressure laminated) sheet of6 mm thick with M S Frame having brass finish letter 304 grad having 8 inch 15 nos letters and 7 inch 26 letters including cutting, grinding, buffering, polishing & finally lacquring & pasting in wooden frame with help of Adhesive as per sample direction of engineer in charge including backside support wooden ply etc complete. |
| 33 | Provision for repair of 7.00 nos of spilt AC with filling gas and other repairs including all charge etc complete. |
