|
| 1 | Sub Heading 1 |
| 2 | River Sand: Supply of Good Quality River sand (Coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5% by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar |
| 3 | Brick Bats: Supply of Good Quality Brick bats: Used as coarse aggregate in lime mortar. broken from brunt clay Class designation 7.5 brick, prepared by pozzolanic material well burnt good quality bricks / clay balls, crushed in such a way passing through sieve 20mm 85 to 100 and 5 to 10% retained on 40mm Seiver, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, and Lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications |
| 4 | Supply of Good Quality un slaked Lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method: On the process of slaking, from non-hydraulic lime Silica and alumina in quantities of less than 15% in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25N/mm² Compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications. |
| 5 | Supply of Schist stone slab 150 mm thick in sizes 2.75 m × 0.60 m and 2.75 m × 0.45 m, the stone being free from flakes and cracks, with sound stone core, including transportation charges, stacking in the required pattern as directed by the Work-in-Charge, and including the cost of all labours, materials, etc, complete as per specifications. |
| 6 | Supply of Good Quality Jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge. (The material sample approval should be taken from the office before supplying) |
| 7 | Supply of Good Quality Karkkai ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the site in charge. (The material sample approval should be taken from the office before supplying) |
| 8 | ARALDITE Standard Epoxy Adhesive Superior Bonding, Exceptional Strength, Durable & Reliable: Engincered for durability, this adhesive solution should guarantee resilience against environmental factors, ensuring bonded items stay secure over time. |
| 9 | Water proofing adhesive-bonding agent, waterproof coating and site-mix mortar admixture, ideal for waterproofing of roof slabs, sunken slabs, basements, retaining walls, water tanks, sunshade Increases adhesion, flexural and tensile strength. |
| 10 | Hiring of Mobile Hydraulic Crane 20T capacity including transportation, driver etc as per instruction of site in charge. |
| 11 | Hiring Grinding machine & Running cost lime grinding machine including transportation, driver etc &as per instruction of site in charge for 1.50 days. |
| 12 | Disposal of Rubbish including loading and unloading away from the site etc complete. |
| 13 | Tarpaulin sheet 30 feet X 40 feet high-density polyethylene (HDPE) or Multi-Layered Cross Laminated (MLCL) materials, often with 120 GSM to 250 GSM (grams per square meter) thickness for durability, 100% Waterproof and Weatherproof and UV Stabilized/Protected (essential for long-term outdoor exposure). (The material sample approval should be taken from the office before supplying) |
| 14 | Plastering water proofing compound- involve using integral liquid admixture, ensuring the compound meets IS 2645 standards, and applying it with proper surface prep, corner rounding (angle fillets), and sometimes a top coat for comprehensive protection against water ingress, following manufacturer guidelines for dosage, must have ISI mark, conforming to IS 2645 and Potable, pH-neutral. (The material sample approval should be taken from the office before supplying) |
| 15 | Safety Helmet - Strong, rigid materials like High-Density Polyethylene (HDPE), ABS, or Polypropylene (PP), Domeshaped, without metallic parts, UV resistant. Hamess System (Suspension), Impact Absorption, Penetration Resistance, Electrical Insulation: Class G (general), Temperature Resistance, Standards & Certifications - IS 2925(The material sample approval should be taken from the office before supplying) |
| 16 | Safety shoes should meet requirements such as water impermeability, puncture resistance and slip-resistant soles, Safety or protective footwear (EN ISO 20345): It has a minimum impact resistance of 200 Joules and compressive strength of at least 15 kN at the toe cap. (The material sample approval should be taken from the office before supplying) |
| 17 | Safety Belt - full-body harnesses (FBH) for fall arrest (dorsal Dring), made from high-tenacity polyester/nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like CE/BIS/ISO, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per IS 3521. (The material sample approval should be taken from the office before supplying) |
| 18 | Hand Gloves - should compliance with standards such as EN 388:2016 (Mechanical Risk) and ANSI/ISEA 105 (Cut Resistance). (The material sample approval should be taken from the office before supplying) |
| 19 | Safety Goggles - Should be impact-resistant polycarbonate lenses, UV protection, anti-fog/scratch coatings, and a wraparound/side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ANSI Z87.1, ensuring protection from debris, dust, and radiation for construction environments. (The material sample approval should be taken from the office before supplying) |
| 20 | Dust mask - non-woven polypropylene (disposable), activated carbon, silicone rubber (reusable masks), used for heavy-duty, dusty conditions, Filters at least 94-95% of airborne particles. |
| 21 | PVC Round Pan (ghamela) - High-grade Virgin PVC (Polyvinyl Chloride) or heavy-duty Polypropylene (PP/PPCP) for high strength and flexibility. Smooth interior surface, Crack and impact-resistant, Weather-resistant for both indoor and outdoor use, generally 5mm to 10mm thickness, Shape: Round, open-top bowl, standard construction sizes usually 15-18 inches diameter, 10 kg to 20 kg load capacity. Roughly 8 to 12 inches height. (The material sample approval should be taken from the office before supplying) |
| 22 | Spade with handle - Blade Material: Hardened or Tempered Steel (e.g., 14-gauge) is standard for durability, Flat or slightly curved, usually with a sharp, pointed, or straight edge for cutting through hard soil or turf, Blade size 8.5 to 11 inches for heavy duty digging, length Ranges from 30 inches to 48-58 inches. Handel material should be High-quality wood (hardwood) for comfort and, as per standard specifications, should be smooth, dry, and securely fastened. (The material sample approval should be taken from the office before supplying) |
| 23 | Wooden Float- crafted from high-grade, seasoned hardwood such as mahogany, teak, redwood, or jarrah to resist wear, warping, and water damage. it should be flat, smooth wooden base with a sturdy, well-balanced wooden or durable composite handle. length 30cm to 50cm width 7.5cm to 12.5cm, Lightweight (The material sample approval should be taken from the office before supplying) |
| 24 | Trowel - Blades: Hardened, tempered high-carbon steel for durability; stainless steel for rust resistance. Handles: Smooth, seasoned hardwood or PVC. Shoulb be in accordance with Indian Standards IS 1630 (1984). (The material sample approval should be taken from the office before supplying) |
| 25 | Hammer 2kgs head with handle - Head is hardened and tempered, typically ranging from HRC 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, Handel made up of high-quality hardwood. two-color carbon fiberglass shaft designed to absorb shock and reduce hand fatigue. (The material sample approval should be taken from the office before supplying) |
| 26 | Chisel - Made up of High-grade alloy steel, chrome-vanadium (CrV) steel, or carbon steel for high durability. Induction-hardened tips (around HRC 63–65). Bevel-edged, flat, or pointed (moil) edge. (The material sample approval should be taken from the office before supplying) |
| 27 | Water drums 200L - 200 Liters capacity, made of HDPЕ (plastic), corrosion resistance, UV stability, and lightweight (~8-10 kg empty Removable lid with a metal or plastic locking ring/clamp for easy filling, cleaning, and access. (The material sample approval should be taken from the office before supplying) |
| 28 | Plastic Buckets - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from High-Density Polyethylene (HDPE) or Polypropylene (PP), offering impact resistance, chemical resistance, and UV protection for outdoor use. (The material sample approval should be taken from the office before supplying) |
| 29 | Plastic Jugs - made up of plastic, 1.5 litre capacity, square or round shape with handle. |
| 30 | Gunny bags - Made up of jute, Free from dirt, mold, or residue, free from cuts, holes, or fungal growth, and never used for harmful chemicals (like cement/fertilizers). |
| 31 | Curing pipe one inch 90 meter - pvc pipe length 90m with good quality, durable easy to use, light weighted etc. (The material sample approval should be taken from the office before supplying) |
| 32 | sharpening charges of chisel (5times) |
