|
| 1 | EARTHWORK: |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5M including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50M(a) All kinds of soil. |
| 3 | Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering lead upto 50 m and lift upto 1.5 m |
| 4 | Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating and dressing complete. |
| 5 | CEMENT CONCRETE WORKS: |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering,- All work upto plinth level:(a) 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) |
| 7 | RE-INFORCED CEMENT CONCRETE WORKS: |
| 8 | Providing and laying inpositionready mixed plain cement concreteor site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability without impairing strength;including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete. All work upto plinth level: |
| 9 | (a) Concrete of M-25 grade with minimum cement content of330 kg/cum. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with |
| 11 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 12 | Reinforced cement concrete work in walls (any thickness) i/c attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level but excluding the cost of centering and shuttering and reinforcement: |
| 13 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 14 | STEEL REINFORCEMENT: |
| 15 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete. |
| 16 | (a) Thermo-Mechanically Treated bars |
| 17 | FORM WORKS: |
| 18 | Providing form work i/c centering & shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in-situ reinforced concrete and plain concrete work in: |
| 19 | a). Foundation, footing, bases of column etc and mass concrete. |
| 20 | b). Column, pillar, posts and struts (square rectangle or polygon in plain). |
| 21 | c). Lintels, beams , plinth beams, girders, bresummer and cantilever withwater proof ply12 mm thick |
| 22 | d). suspended floor,roofslandingbalconies ans access platform withwater proof ply12 mm thick |
| 23 | e).Stairs (excluding Landings) except spiral-staircase. |
| 24 | f). Weather shade, Chhajjas corbels etc. including edges |
| 25 | g) Vertical and Horizontal Fins individually or forming box louvers band, facias and eaves. |
| 26 | BRICKWORKS: |
| 27 | Brick work with 1st class burnt clay F.P.S(non modular) bricks in foundation & plinth in cement mortar 1 : 4 (1cement :4 coarse sand). |
| 28 | HalfbrickmasonrywithIstclasscommonburntclayF.P.S.(non modular) bricksin superstructure above plinth level upto floor V level in cement mortar 1 : 3 (1cement :3coarse sand). |
| 29 | WOOD WORKS: |
| 30 | Providing wood work in frames of doors, windows, clerestorywindows andotherframes wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia. And length (hold fast or dash fastener shall be paid for seperately(a) Local best quality Teak wood |
| 31 | Providing and fixing panelled or paneled and glazed shutters for doors,windowsand clerestory Windows i/c ISI marked M.S.butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-charge.(a)Local best quality Teak wood. -35 mm thick shutters |
| 32 | Providing 40X3mm flat iron hold fast 40cm long i/c fixing to frameswith 10mm dia. Bolts, nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 mix (1 cement : 3coarse sand: 6 stone aggregate 20mmnominal size). |
| 33 | Providing and fixing bright finished brass 100 mm door mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 34 | Providing and fixing ISI marked oxidised M.S. Tower bolts black finished(barrel type ) with screws etc. complete. |
| 35 | (a) 250x10mm |
| 36 | (b) 100x10 |
| 37 | Providing & fixing ISI marked oxidisedM.S. Sliding bolts with screws etc. Complete.(a) 250X16mm. |
| 38 | FLOORING: |
| 39 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption’s less than 0.08% and conforming to IS : 15622 ofapproved make in all colours and shades, laid on 20mm thickcement mortar 1:4 (1 cement: 4 coarse sand) including groutingthe joints with white cement and matching pigments etc.,complete. |
| 40 | Size of Tile 600 x 600 mm |
| 41 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (Icement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm. including grouting the joint with white cement & matching pigments etc.complete. |
| 42 | Size of Tile 600x600 mm |
| 43 | STEEL WORKS: |
| 44 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffering, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of the stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 45 | Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 46 | Steel work in built up tubular ( round, square or rectangular tubes etc.) including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. |
| 47 | Electric resistant welded tube (Conforming to IS:1611-1979) |
| 48 | Providing & fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) with zinc caoting 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metres or as desired by Engineers-in-charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with |
| 49 | Precoated galvanished iron profile sheets 0.50 mm thick . |
| 50 | Providing & fixing precoated galvanised steel roofing accessories, Zinc caoting 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or GI seam bolts and nuts, G.I plain and bitumen washers complete : |
| 51 | Ridges plain (500 -600mm) |
| 52 | Precoated galvanished iron profile sheets 0.50 mm thick . |
| 53 | Providing and fixing false ceiling with 12 mm thick plain/semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087 finished with a coat of aluminium primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium ( with 15 micron anodic coating) T-sections 35X15X1.5 mm size main runners and cross runners 23.5X19X1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. the frame work shall be suspended from ceiling by level adjusting hangers of 6mm dia M.S rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600X1200 mm centre to centre including fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately.) |
| 54 | Providing and fixing 20 mm Plank as eave board with Tolhao / Uchanwood |
| 55 | FINISHING: |
| 56 | 15mm cement plaster on rough side of single or half wall of mix: 1: 4 (1 cement : 4 coarse sand) |
| 57 | 12mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement . |
| 58 | Providing and applying white cement based putty of average thickness1mm of approved brand and manufacturer over plastered surface to prepare the surface even and smooth complete. |
| 59 | Distemperingwith oil bound washable distemper of approved brand and manufacturer to give an even shade. New work (two or more coats) over and including priming coat with cement primer :- |
| 60 | Finishing walls with Arcylic Smooth exterior paint of requierdshade :New work (two or more coat applied @ 1.67 ltr/10 sqm. Over and including base coat of water proofing cement applied @ 2.20 kg/10 sqm) |
| 61 | Making plinth protection 50 mm cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size)over75 mm bed of dry brick ballast 40 mm niminal size well rammed ans consolidated and grouted with fine sand including finishingthe top smooth. |
| 62 | Supplying and installation of 8 passenger (load 1088kg) machine roomless (MRL) lift, speed not less than 1m/s as per direction of engineer in charge including all accessories complete. |
| 63 | EarthWork |
| 64 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 65 | All Kinds of Soil |
| 66 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 67 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 68 | 1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 69 | Centering and shuttering including strutting,propping etc.and removal of form for : |
| 70 | Foundations, footings, bases of columns, etc. for mass concrete |
| 71 | Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick. |
| 72 | R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas,lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor fivelevel excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 73 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 74 | Thermo-Mechanically Treated bars |
| 75 | PRE-CAST: |
| 76 | Brickworks: |
| 77 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 78 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 79 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 80 | Cement mortar 1 : 4 (1 cement : 4coarse sand) |
| 81 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 82 | Flooring: |
| 83 | 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix :2 graded stone aggregate 6 mm nominal size) by volume hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 84 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : |
| 85 | 1 :3 ( 1 cement : 3 fine sand} |
| 86 | Supplying and fixing C.I. Cover with frame (for manhole and chambers) |
| 87 | 600x450 mm rectangular C.I. Cover (heavy duty) 38kg |
| 88 | SANITARY INSTALLATION |
| 89 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 90 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests |
| 91 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.1. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 92 | W.C. pan with ISi marked white solid plastic seat and lid. |
| 93 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : |
| 94 | Size 600x450x200 mm |
| 95 | Providing and fixing kitchen sink including making all connections excluding cost of fittings. |
| 96 | White glazed fire clay sink of size 600x450x250 mm |
| 97 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 98 | White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers |
| 99 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x41 0x265 mm sizes respectively. |
| 100 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 101 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 102 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 103 | Flexible pipe |
| 104 | 32mm dia. |
| 105 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 106 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 107 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 108 | Providing and fixing UPVC soil, waste, rain water and vent pipesd i/c all requisit fittings, jointing of pipe and fittings with solvent cement, trencing, refiiling and testing of joints complete as per direction of engineer in charge. |
| 109 | 75 mm dia. |
| 110 | 110 mm dia. |
| 111 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 112 | 15 mm |
| 113 | 20 mm |
| 114 | 25 mm |
| 115 | 32 mm diameter |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External Work |
| 117 | 32 mm diameter |
| 118 | 80 mm diameter |
| 119 | Providing and fixing brass bib cock of approved quality: |
| 120 | 15 mm nominal bore |
| 121 | Providing and fixing brass stop cock of approved quality : |
| 122 | 15 mm diameter |
| 123 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : |
| 124 | 25 mm diameter |
| 125 | Vertical Code |
| 126 | 32 mm diameter |
| 127 | Vertical Code |
| 128 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 129 | 150 mm diameter |
| 130 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 131 | RO UNIT : |
| 132 | Supply ,Testing andCommissioning ofwallMounted seconday R.O. Plant of 50 LPH capable to deliver Output water at TDS150 PPMFor LABS. System to include all valves , switches, sockets, pipes, reject water management,connections and accessoriesto make the system complete and functioning. |
| 133 | Supplying , Installation, testing and commissioning of Water Pump, all fittings complete. |
| 134 | 5hp electric pump |
| 135 | EARTH WORKS |
| 136 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks r filling up ground depressions, lead upto 50 m and lift upto 1.5 m |
| 137 | All Kinds of Soil |
| 138 | Providing and laying factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in reqired colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 139 | 80mm thick |
| 140 | MSR VOL.- 2 (Chapter-4) |
| 141 | Sub base, bases (Non-Bituminous) and Shoulders |
| 142 | Granular Sub-Base with Close Graded Material (Table-400-1) |
| 143 | By Mix in Place Method |
| 144 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired desity, complete as per clause 401 |
| 145 | Grading-III Material |
| 146 | Sub-Head -I (Wiring) |
| 147 | Wiring for light point / fan point/Exhaush Fan point /call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface /recessed steel conduit with modular type switch,phemolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. |
| 148 | Group C |
| 149 | Wiring for light point /power point plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface /recessed steel conduit alongwith 1 no.4.sq.mm FR PVC insulated copper conductor single core cable for loop earting etc as required. |
| 150 | Wiring for circuit / sub main wiring alongwith earth wire with following size of FR PVC insulated copper conductor, single core cable in surface /recessed steel conduit as required. |
| 151 | a) 2X1.5.mm² +1x1.5mm² earth wire |
| 152 | b) 2X2.5.mm² +1x2.5mm² earth wire |
| 153 | c) 2X4.mm² +1x4mm² earth wire |
| 154 | d) 2X6.mm² +1x6mm² earth wire |
| 155 | Sub- Head-II |
| 156 | ( Fittings & Accessories) |
| 157 | S/F Recess Mounting LED down Lighter BGSL 0101WH,220223,cast aluminium housing fixed with collimated lens,1x1W white LED mounted on MCPCB ,extruded Al heat sink spring loaded mounting clips, complete with connections etc as reqd. |
| 158 | Supplying, installation testing and commissiong of ceiling fan, capacitor type suitable for low voltage operation including wiring the down rods of standard length (upto 30 cm ) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (ISI marked approved) |
| 159 | a) 1200 mm sweep |
| 160 | S/F stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate as reqd. |
| 161 | 305mm sweep exhaust fan complete with all accessories connection etc as required |
| 162 | S/F Light Plug Point Modular Type Accessories |
| 163 | (a) S/F suitable size G.I. box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket outlet 5/6 amp modular switch, connection painting etc. (Light plugs to use in non-residentail building). |
| 164 | S/F Power Plug Point Modular Type Accessories |
| 165 | (a) S/F suitable size G.I. box with modular plate and cover in front on surface or in recess i/c P/F 6 pin 15/16 amp modular socket outlet 15/16 amp modular switch, connection painting etc. |
| 166 | Supply and fixxing of following size of PVC casing and capping along with accessories etc. |
| 167 | (a) 20mm |
| 168 | S/F 2 ton capacity split type Air conditioner (Diamond, 3 star , 5G 29, G-SC 24 FD 3 WJH) complete with indo voltage stabilizer Automatic 5 KVA ( 140-280 for 2 ton). |
| 169 | S/F 35ltr water heater (Geyser) A.C. 2kw vertical type with all acessories, (150581 SKT-Plus 35L) i/c connection etc as reqd. |
| 170 | Sub-Head - III |
| 171 | ( Earthing ) |
| 172 | P/F lighting conductor finial made of 25mm dia 300mm long copper tube having single prong at top with 85mm dia 3mm thick copper plate i/c holes etc. Complete as reqd |
| 173 | p/f copper tape in horizontal run p/f copper tape 2ommx3mm thick on parapet or surface of wall for lightning conductor as reqd(for horizontal run) |
| 174 | p/f copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd(for vertical run) |
| 175 | Earthing with copper earth plate 600 mmx 600mmx6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 176 | Extra for using Salt & Charcoal for copper plate with electrode as reqd. |
| 177 | Earth connection from earth electrod with 4mm dia in 15mm GI pipe as required |
| 178 | Sub- Head- IV |
| 179 | (DB,s & MCB,s) |
| 180 | S/F (Following way) Single/Double pole and neutral, sheet steel MCB distribution board, 240V on surfuce/ recessed complete with tinned copper bus bar, neutral bus bar, din bar, detachable gland plate, interconnection, phosphatized powder painted i/c earthing etc as reqd. (but without MCB/RCCB/Isolator). |
| 181 | S/F \"B\" series,SP MCB. Supplying and fixing following 5 amps to 32 amps rating 240 Volts, B series, miniture circuit breaker suitable for lighting and other load of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required. |
| 182 | a) Single Pole |
| 183 | S/FDP MCBisolator: Supplying and fixing following rating, four pole,240 volts, isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 184 | a)100 amps. |
| 185 | Sub- Head- V |
| 186 | ( Rising Main & Meter Board ) |
| 187 | P/F 400Amp TPN stand ground on load on load change own switch (compact design) 415/500v including connection to as required. |
| 188 | S/F Busbar chamber with 4 strips copper busbar of length 600mm suitable for 200 amps capacity complete with all accessories i/c connection earthing the body as required. |
| 189 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 190 | 100 A, 10 kA,TPMCCB |
| 191 | RISING MAINS & BUS TRUNKING |
| 192 | Providing anf Fixing ( Following rating and breaking capacity) MCCB in esisting cubicle panel board including drilling holes in cubicle panel & making connection as reqd. |
| 193 | 125 A, Isc = 25 kA for 1 second |
| 194 | Providing and fixing 125 amp TPN stand ground on load change over switch (Compact design)415/500 V including connectionetc as reqd |
| 195 | S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 200 amp capacity complete with all accessories i/c connection earthing the body etc as reqd |
| 196 | EARTHING |
| 197 | Earthing with copper earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. without charcoal/ coke and salt) as required. |
| 198 | Extra for using salt and charcoal for GI or copper plate earth electrode as reqd |
| 199 | Providing and Fixing 4mm dia copper wire on surface or in recessed for loop earthing as reqd |
| 200 | CHAPTER 7-MV CABLE LAYING |
| 201 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size not less than 25 Sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 202 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 203 | Additional Items |
| 204 | Laying and fixing of 1 no.PVC onsulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm but not exceeding 120sqmm on surface as reqd. |
| 205 | Supplying installing testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses connections earthing etc as reqd. |
| 206 | 63 A TPN |
| 207 | Supply,installation, testing and commissioning of 450 KVA Control Panel |
| 208 | Telephonic Conduits |
| 209 | Providing of telephonic Conduits |
| 210 | Providing & Fixing of M.S. pipeincluding of primer & red paint , fashner, MS bend , tei rod, universal clamp, MS socket,MS flange nut bolt , Gasket etc. Make : Nizone |
| 211 | a. 100 mm dia |
| 212 | b. 80 mm dia |
| 213 | c. 50 mm dia |
| 214 | e. 25 mm dia |
| 215 | Supply and fixingHydrant valve |
| 216 | Supply and fixing RRL hose pipe 15 mtr. Long including male female coupling |
| 217 | Supply and fixing Branch pipe |
| 218 | Supply and fixing Hose box |
| 219 | Supply and fixing Hose reel hose with drum 30 mtr long |
| 220 | Supply and fixing Two way Valve |
| 221 | Supply and fixing ABC type fire extinguisher 4 kg |
| 222 | Supply and fixing CO2 type fire extinguisher 4.5 kg |
| 223 | Supply and fixing Pendent type Sprinkler |
| 224 | Supply and fixing 25 mm ball valve including of fittings |
| 225 | Supply and fixing Butterfly Valve 100 mm dia |
| 226 | Supply and fixing Butterfly Valve 50 mm dia |
| 227 | Supply and fixing Non Return Valve 100 mm dia |
| 228 | Supply and fixing Foot Valve 100 mm dia |
| 229 | Supply and fixing of Pressure Switch |
| 230 | Supply and fixing Pressure Gauge |
| 231 | Providingfixing of 2280 LPM 28 KW Fire pump Diesel Engine incuding of all fittingsMake-Lubi/Kirloskar |
| 232 | Providing and fixing of 5HP Motor pump incuding of all fittings (monoblock type).Make-Kirloskar or Equivalent |
| 233 | Providing & fixing of Electric panel/starter for main pump |
| 234 | 1 loop panel, Expandable to 2 Loop fire alarm control panel (Microprocessor base) - FACP |
| 235 | Smoke detector (Ionization, Optical,Duct,Beam). |
| 236 | Heat Detectors |
| 237 | Manual Call point |
| 238 | Hotter cum Sounder |
| 239 | Strobe lights (visual Alarms) |
| 240 | 0.75 sq mm copper cable with PVC conduit |
| 241 | 1.0 sq mm copper cable with PVC conduit |
| 242 | 1.5sq mm coper cable with PVC conduit |
| 243 | Secondary(Backup) Power Supply |
| 244 | 12V 105 AH Batteries |
| 245 | Soil Testing |
