Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the debris out of MOD premises complete all as specified and directed. |
| 4 | M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed. |
| 5 | Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints,hacking for key , scrubbing down with water etc complete all as specified and directed |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 7 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed. |
| 8 | M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed. |
| 9 | All as per description of Srl item No. 8.00 here-in- before but except bricks.Note:- Serviceable bricks retrievedby demolition of old brick work shall be re-used. |
| 10 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 11 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 125 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 12 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ choowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs fasteners shall be paid for separately).complete all as specified & directed. |
| 13 | S & Ffactory made single extruded WPC (Wood Polymer Composite) solid one side decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) ® |
| 14 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S `screws shall be paid separately |
| 15 | S&F 35mm thick single piece Factory made wire gauge doorshutters including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19mm x19 mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement complete all as per Drawing No CEPZ/TD-378/ Sheet 1/1 dated 27/12/2011 complete all as specified and as directed . |
| 16 | S&F in repairs Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thickMS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fastsetc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including two coat of synthetic enamel paint over one coat of red oxide zinc primer, complete all as specified and directed. |
| 17 | S&FStainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples. |
| 18 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqmin each pane, complete all as specified and directed. |
| 19 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified and directed. |
| 20 | S&F Aluminium, anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. |
| 21 | S&F floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 22 | S&FAluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 23 | S&F Aluminium, anodised, handles 125 mm of extruded section and fixed.complete all as specified and directed. |
| 24 | S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed. |
| 25 | S&F Butt hinges 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified and directed. |
| 26 | S&F in repair stainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minium wt 190gms) complete all as specified and directed |
| 27 | S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed |
| 28 | S&F \"as in repair\" 25mm outer dia stainless steel decorative drapery rod of thickness 20 guagewith stainless steel brackets near to ends with stainless steel finialswith adopter for 25 mm dia drapery rod at both ends complete all as specified and directed. |
| 29 | M&L for Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in cooking platforms, treads, riser or landing of stair hall, window cill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges complete all as specified and directed. |
| 30 | M&L for Machine cut Kota stone slab flooring not less than 18-20mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine,complete all as specified and directed. |
| 31 | M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and directed.. |
| 32 | M&L in repairs for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, taking out existing interlocking paver block complete all as specified and directed. |
| 33 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stoneagg) as in Sub-base to floor finishes surface finished even and rough to receive top finish. |
| 34 | M&L for rendering 5 mm thick plaster in cement mortar 1:3 on concrete surfaces as in ceilings,finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for rendering 10 mm thick plaster on fair faces of brick work or concrete surface in CM 1:6,finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixed with and including WPC @ 200ml/bag of cement, complete all as specified and directed. |
| 37 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed. |
| 38 | M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20mm graded agg) as in plinth protection finished even and smoothusing extra cement (incl necessary joint filling with mixture of paving bitumen & sand in ratio1:3) complete all as specified and directed. |
| 39 | M&L for Preparation of newly plastered surface of walls and applying two coats of oil bound distemper, white or tinted shade including priming surfaces with chalk whitening, complete all as specified and directed. |
| 40 | M&L for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper, white or tinted shade includingpriming surface with chalk whitening, complete all as specified & directed. |
| 41 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 42 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 43 | M&L for preparing of old decorated plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed. |
| 44 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 45 | M&L for preparing of Old painted surfaces of steel or ironof any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complete all as specified and directed. |
| 47 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 48 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed. |
| 49 | Supply & Fixed steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling and floor complete all as specified and directed. |
| 50 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 51 | Supply & Fixed steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.. |
| 52 | Fixing only old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) with new fittings complete all as specified and directed. Note:- Serviceable tubesretrieved by taking up down old tubing shall be re-used. |
| 53 | S&FGIpipe 32 mm dia light grade in short length as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1: 2:4 type B -1 complete all as specified and directed. |
| 54 | S & FrepairRotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight of vlave 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 55 | S& F in repair concealed Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and as directed. |
| 56 | S&F in repairs Bib tap 15 mm bore long body, Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 57 | S & F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 58 | S&F in repairs stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cupscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and complete all as specified and directed. |
| 59 | Supply & fixed in repairs CP Brass shower rose 200x200 mm size with with flexible brass arm 450-550mm long for 15 mm bore pipe complete all as specified and directed. |
| 60 | Supply and fixed Soap dish complete all (material SS finish, glossy) fixed to plugs with CP brass screws. |
| 61 | Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, \"Orissa pattern\", size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and directed. |
| 62 | Supply & fixed in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device. |
| 63 | S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m longLongFlexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 64 | Supply & fixed in repair 5.50mm thick bevelled edge mirror of selected quality glass, mounted on 6 mmdia SS clamp on countercomplete all as specified and directed. |
| 65 | Supply & fixed in repair Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and as directed. |
| 66 | Supply & fixed in repair, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, wastechain and plug and porcelain stopper but incl brackets complete all as specified and directed |
| 67 | Supply & fixed in repair Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing ofCP coupling, waste pipe and cp brass spreder all necessary fittings, complete all as specified and directed. |
| 68 | S&F corrugated waste pipe, 32 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed. |
| 69 | S& F in repair Brass CP towel rail 20mm dia \"D\" type 60 cm long between flanges complete all as specified and directed. |
| 70 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) floor trap, dia of outlet in 75 mm, plain excludinggrating, but including jointing with solvent cement complete all as specified and as directed. |
| 72 | Supply & fixed in repair PVC grating square, 150 mm (Hinge pattern and with or without hole) complete all as specified and as directed. |
| 73 | Supply & fixed in repair, 110 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / trench with suitable clamp complete all as specified and as directed. |
| 74 | Supply & fixed, 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and as directed. |
| 75 | Supply & fixed 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 76 | Supply & fixed in repair, 75 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls /trench with suitable clamp complete all as specified and as directed. |
| 77 | Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and as directed. |
| 78 | M&L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 79 | M&L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 80 | M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished rough to received floor tiles etc complete all as specified and directed |
| 81 | M&L for Reinforced cement concrete (nominal mix) in type B-0 using 1:2:4 (12.5mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 82 | M & L for Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate as in manhole cover slab including necessary formwork complete all as specified and directed. |
| 83 | M&L for TMT steel bars 6 to 8mm dia, cut to length bent to shape required including cranking bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 84 | Use and waste of formwork to soffits of WHB counter, plateform rough finished surfaces of suspended slabs such as roof slab,floor slabs landings and similar workscomplete all as specified and directed. |
| 85 | M & L for 15 mm thick plaster in CM 1:4 with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) of 12.50mm Agg on the junction offloor and wall the surface shall than he cured and allowed to dry . Apply Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc,pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed. |
| 86 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 87 | M&L for Cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate)as in mass filling in sunken slab of kitchen, toilets and mass concrete sub base, complete all as specified and directed.. |
| 88 | Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & dechockingof drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional complete all as specified and directed.. |
| 89 | Taking down existing roof treatment of any description incl mud phuksha or PCC pedding if any (any no of layers) including removaldebries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as specified and directed. |
| 90 | S & F Wire netting of stainless steel wire 0.71 mm dia with size of mesh 25mm fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed. |
| 91 | M&L for cement concrete 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) leveling course on existingroof, rounded and chamfered on edges, with WPC @200ml/ bag of cement complete all as specified and directed. |
| 92 | M&L for APP modified roof treatment laid on existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water complete.(b) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane.(f)APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0complete. |
| 93 | M&L forChequered cement concrete tile 30cmx30cmx 25 mm thick, set & jointed in neat cement slurry and pointedwith grey cement and pigment, laid over & including 20mm thick cement screed in CM:1:4 complete all as specified anddirected. |
| 94 | M&L in repair for false ceiling of 8mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 95 | S&F for 4mm dia GI wire forfor hanging mosquito net with adjustable mild steel clamp complete all as specified and directed. |
| 96 | Taking down carefully copper/aluminium point wiring (Light/Fan/ socket or power) with complete fittings such as switch, sockets, ceiling rose, pendent holders, regulators etc, removing old/UNSV material from site and making good the old disturbed surface complete all as specified and as directed. |
| 97 | M& L in repair for Point wiring for one light, fan, bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistranded copper conductor single core multi strand flexible cable FRLS including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty includingsunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet including FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to distrubed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. |
| 98 | All as per description of Srl item No 97 here-in-before but for one light point controlled by two way switches 230 Volts |
| 99 | All as per description of Srl item No 97 above but for 5 pin 5/6 Amp socket outlet point on same board controlled by one switch 5 Amp one way. |
| 100 | All as per description of Srl item No 97 here-in-before but for 5 pin 5/6 Amp socket outlet point on Independent board controlled by one switch 5 Amp one way . |
| 101 | All as per Srl item No. 97 here-in-before but for one 15 Amp independant socket outlet pointusing 2.5 Sqmm FRLS PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly . |
| 102 | All as per description of Srl item No 97 here-in-before but with 4 sqmm FRLS copper cable insulated for 3 pin 15/16 ampmultipurpose outlet including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 103 | S & F switch piano flush button single pole one way 5/6 amps 240 volts with polycarbonate body complete all as specified and as directed |
| 104 | S & F switch piano flush button single pole two way 5/6 amps 240 volts with polycarbonate body complete all as specified and as directed. |
| 105 | S & F socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body complete all as specified and as directed. |
| 106 | S & F Switch piano flush button single pole one way 15/16 amps 230 Volts with polycarbonate body complete all as specified and as directed. |
| 107 | S & F socket out let, 6 pin 6 and16 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and as directed. |
| 108 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step all as specified and directed complete all as specified and as directed. |
| 109 | S & F lamp holder with batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed . |
| 110 | S & F for ceiling rosesurface bakelite 2 to 3 terminals with polycarbonate body complete all as specified and as directed. . |
| 111 | Supply and fixing in repairs for LED Lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed |
| 112 | Supply & fix in repair 1x20 watt LED 6500Ktube light fittings (4 feet long), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientwith all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 113 | Supply and fixing in repair LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 114 | Supply and fixing in repair LED light fitting 1x9w/1x10w bulk head luminaires incl LED light driver holder connecting up to three core flexible copper conductor cable of suitable size. |
| 115 | Supply & Fixing in repair building security LED lightluminaire 30 W, IP 66, AC 230 volts,made up of pressure di cast iron housing complete making connectionusing PVC insulated and sheathed3 core multi stranded copper conductorcable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fittingalong with clamps,nut bolts and washers all as specified and directed by Engr-In-Charge. |
| 116 | Note for srl item No 111 to115 above:- 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70.4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W.6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. Lenses shall be Modular Type. 8. PCB used shall be MC PCB type. 9. CA No. shall be written on each fitting before installation. 10. The name of manufacturer to be embossed on the fitting. |
| 117 | Note for srl item No 111 to 115 above (Contd...):-11. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.12. The defect liability period of LED lights shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over for replacement. 13. A guarantee of 05 years shall be provided by contractor supported by OEM covering all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/Final Bill. |
| 118 | Supply & Fix sheet metal enclosure with DB\"s ( grouted in walls) double door type for MCB\"s DB 08 ways with 200 Amps 240 volts rated bus bar all as specified. |
| 119 | S & F sheet metal enclouserssingle pole and neutral 240 volt , 20/32 Amps with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed. |
| 120 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles, current carrying capacity 10 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 121 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 122 | S&F sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and one run 6.0Sqmm multistrand PVC sheathed copper conductor cable for earth continuity drawn in existing surface /recessed steel/ PVC conduit complete all as specified and directed . |
| 123 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I all as specified and directed. |
| 124 | S&F as in repair prewired VTPN Distribution board of size not less than 750mmx470mm with provision for MCCB as incommer 63 Amp 04 pole IP 54, 04 way (for incomming MCCB & outgoing MCBs), with copper busbar for each phase, withNeutral bar,Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 50 KA, 4 pole, as incomer and SP MCB\"s of cap6-32amps as outgoing complete all as specified and as directed. Note: Rate of MCCBs and MCB,cutting,chasing,grouting in wallare included in above rate. |
| 125 | Supply, fixing and testing in repair of exhaust fans AC single phase rated voltage 230V, not more than 50W, 1350rpm of size 300 mm sweep, Double ball bearings heavy duty motor, Protective bird guard is provided, steel body with louvre of Havells or equivalent in Bajaj/crompton greaves including connecting to ceiling rose and making hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos forfixing exhaust fanall as required and directed. |
| 126 | Taking down ceilling fan by disconnecting from ceilling rose, dismaintling blades & hanging ceilling fan back after repair including re-fixing of blades, making of electric connections complete all as specified and directed. |
| 127 | M&L for servicing of ceiling fans of capacity 1200/1400mm, dismantling, cleaning/checking, greasing/oilingof bush and bearings, replacement of defective parts viz. set of split pins, cotter pins, blade screws, canopy screws of suitable size including replacement of PVC fan box round sheet as required on site complete all as specified and directed.(Note :- Rewinding and replacement of unserviceable parts other than specified in this items, if any, will be measured & paid seperately). |
| 128 | M&L for dismantling and taking out burnt winding by cutting, cleaningsloutsand re-winding of ceiling fan motor 1400/1200 mm sweep any type with super enameled heat resistant copper winding wire of gauge 35/36 SWG including, sleeve work, varnishing with 1st class insulation, greasing, threading, lathe work, connection with flexible wire 0.472 mm copper wire upto connector block and re-assembling and testing for 4 Hrs after repair complete all as specified and directed. -Notes :- (i) Fan shall be collected by the contractor from concened unit at thier own arrangement.(ii)Motor shall be wound with machine only and repair of fan shall be undertaken inside complex / office of GE (S) Mamun. (iii) Super enameled copper winding wire of Khaitan/RPG/KEI or equivallent make shall only be used. (iv) Total weight of winding wire should not be less than 200 gm per fan. |
| 129 | Supply only gun metal bush of ceiling fan of size 1200/1400 mm sweep as per esixting size, complete all as specified and directed. |
| 130 | Supply only capacitor AC 440volts 2.5 mfdoil filled, with copper wire terminal incl PVC clampISI marked complete all as specified and directed. |
| 131 | Supply only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed. |
| 132 | Supply only shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed. |
| 133 | Supply onlyceiling fan blades made of MS sheet duly powder coated of thickness not less than 1.00mm suitable for 1400/1200mm sweep ceiling fan of any make complete all as specified and directed. |
| 134 | Supply only down rod made of MS pipe Med Grade 15 mm diaof ceiling fan duly spray painted complete with split pin, hanging clamp and rubber real (length of rod not less than 45cm and not more than 60cm) complete all as specified and directed. |
| 135 | Supply only superior quality PVC canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed. |
| 136 | M&L for removing old paint ofceiling fan 1200-1400mm sweep by scraping with sand paper including preparation of surfaces by cleaning, removing oil/grease etc. filling cavities with filter and applying two coats of heat resistant high quality synthetic enamel paint at workshop by spray painting incl writing MES No all as specified and directed.Note:- Paint quality and colour shall be got approved from Engr-in-charge. |
| 137 | Supply and fixing in repairs cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm complete all as specified and directed. |
| 138 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts gradeof crossectional area 50 Sqmm 3.5 Core, strip or wire armoured laid in trenches, fixed to walls/ poles etc complete all as specified and directed |
| 139 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specifed and directed. (cable shall be laid 60 cm below ground level) |
| 140 | Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed |
| 141 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtrs above the starting point complete all as specified and directed |
| 142 | M&L for sand cushioning for cables 8cm below the cable and 15 cm above the cable and punning down all as specified and directed.Note:- Punned thickness shall be measured for payment purpose. |
| 143 | Material & Labour for old size brick well burnt, laid flat for cable protection in trenches complete all as specified & directed. |
| 144 | S&F in replacement GI tubing light grade 50mm bore for passing through cables under the floor along the wall or along the pole complete all as specifed and directied. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
