|
| 1 | SH: Construction of Building i/c Sanitary Installations |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a)1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size). |
| 4 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 6 | (a)Foundation, footing, bases of columns etc. and mass concrete. |
| 7 | (b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 8 | (c) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 9 | (d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
| 10 | (e) Edges of slabs and bricks in floors and walls. (Under 20 cm. Wide). |
| 11 | (f) Stairs, (excluding landings) except spiral-staircases |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 14 | Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. |
| 17 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 18 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand) A) Ground floor. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Uningthou wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Leihao wood 35 mm thick shutters |
| 21 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 22 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 23 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. |
| 24 | Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood. |
| 25 | Providing & fixing 25mm x 25mm uningthou wood balusters 25mm x 25mm square, wrought fixed with ends housd (squar or splay) to hand rails & treads or strings complete. |
| 26 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 28 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 30 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 31 | Floor painting with floor enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 32 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm |
| 33 | Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm |
| 34 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm |
| 35 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes |
| 36 | Providing corrugated GS sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical all curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/sqm. |
| 37 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Local best quality Uningthou |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required- White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 40 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 41 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 42 | Providing and fixing toilet paper holder: C.P. brass |
| 43 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 44 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 45 | ProvidingandfixingPTMTtowelrailcompletewithbrackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 46 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 47 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, i/c all CPVC plain & brass threded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makng good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wall etc. 25mm nominal outer dia pipes. |
| 48 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, i/c all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work, 100 mm nominal outer dia pipes. |
| 49 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 50 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore |
| 51 | Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete. 15 mm nominal bore |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlets, outlet and overflow pipes but without fitting and the base support for tank. |
| 53 | Earth in excavation in hill cutting i/c disposal of excavated earth lift upto 1.50m and lead upto 50m disposed earth to leveled & neatly dressed in Hard/ Dense soil. |
| 54 | SH: Installation of Synthetic Mat |
| 55 | INDOOR BADMINTON COURT7.1METER X 15.4 METE @ 2COURTSupply and installation of prefabricated 9mm thick BWF approved Badminton courts with game line marking as per the norms size of 7.1meter x 15.4meter, Sand / Rain drop texture, the installation process includes apply of the approved fitflex make glue and Thermo Welding to joint the rolls to make seamless. fitflex badminton courts to be laid on a smooth and even surface to achieve the desired outcome, the flooring should weigh 5.6 Kgm every square meter. The Flooring must be made of 5 layers and the Top Layer must be 2.1 mm or above thick, Flooring should be tested in accordance to EN14904:2006 or a higher standard. The Weight of the Flooring must be 5600 Grams per square meter, slip resistance Method DIN5130 result R9, Fire resistance Method DIN4102 and result B1. Shock Absorption 30%. The supplying and installing firm must be certified with ISO 9001:2015, and hold valid EN standard, CE certification, as well as registration under MSME and NSIC in the category of Sports Surfaces and Equipment, ensuring quality, safety, and reliability in execution and The supplying and installing firm must have 10 years of experience in the sports infrastructure industries a affidavit on non-judicial stamp paper to submitted along with technical bid. |
| 56 | INDOOR VOLLEYBALL COURT24 METER X 15 METERSupply and installation of prefabricated 9mm thick BWF approved Volleyball courts with game line marking as per the norms size of 7.1meter x 15.4meter, Sand / Rain drop texture, the installation process includes apply of the approved fitflex make glue and Thermo Welding to joint the rolls to make seamless. fitflex Volleyball courts to be laid on a smooth and even surface to achieve the desired outcome, the flooring should weigh 5.6 Kgm every square meter. The Flooring must be made of 5 layers and the Top Layer must be 2.1 mm or above thick, Flooring should be tested in accordance to EN14904:2006 or a higher standard. The Weight of the Flooring must be 5600 Grams per square meter, slip resistance Method DIN5130 result R9, Fire resistance Method DIN4102 and result B1. Shock Absorption 30%. The supplying and installing firm must be certified with ISO 9001:2015, and hold valid EN standard, CE certification, as well as registration under MSME and NSIC in the category of Sports Surfaces and Equipment, ensuring quality, safety, and reliability in execution and The supplying and installing firm must have 10 years of experience in the sports infrastructure industries a affidavit on non-judicial stamp paper to submitted along with technical bid. |
| 57 | Transportation cost |
